Neck Humbucker Ring - P90 Cavity
A custom neck humbucker ring, designed to fit over a P90 cavity. Screw sizes are standard.
- Downloads
- 68
- Likes
- 7
- Rating
- 0
43 models
A custom neck humbucker ring, designed to fit over a P90 cavity. Screw sizes are standard.
I've searched for quite a while and can't really seem to find any good, modern, 12mm humbucker bobbins for 7 string. So I took the time to learn Fusion and made some myself. Hope these work for everyone, it WAS my first experience…
This bobbin is for making and replacing pickups for a 6 string electric guitar. It is designed with 6 holes (⌀5mm) for rod magnets and 3 holes (⌀1,9mm) for coil winding machines. The middle section for the coil has straight walls. These…
Snap on Cap for open humbucker with sturdy frame. The frame also fits closed humbucker pickups. Print Settings Rafts: No Supports: No Resolution: 0,3mm Infill: 25% Filament: Maertz PLA Glitter Blue / Green Category: Music
Print the same way the original was. I modified this to fit humbuckers (non-covered, only the open bobbins will fit and barely). No more screw holes, deepened the electronics cavity. Narrowed and tapered the neck pocket and got rid of the…
Different sices of Humbucker Frames. If you want a specific sice: Just cut the 10.5 file in slicer
Hey! I want to share my project I have been working on the last couple of weeks. It is one of my first projects too. I really liked the idea of the Prusacaster but I wanted more beef. So I present you, the purists absolute nightmare. I…
This is a remix of a Prusacaster that will allow a humbucker bridge, and designed for a 24.75" scale length neck. (not tested with the Harley Benton kit which I believe is 25.5" scale length) Completed: Bridge cutout re-done to allow the…
I included the Fusion 360 file so you can customize it with your design, using a vector file is the simplest way to extrude out the material.
A cover-less humbucker pickup frame for electric guitar. This v1 version is available in multiple height and is angled a bit so the humbucker can be more parallel to the string position. Does not fit humbucker with cover plate! V1 is…
Simple template for routing cavities for humbucker pickups in a guitar body. Print with extra sidewalls to reinforce the area where the bearing will set against.
Upgrade your guitar with this customizable humbucker plate. Designed for easy modification, it comes with a Fusion 360 file, allowing you to tailor it to your specific needs. Perfect for guitar enthusiasts looking to personalize their…
Strat humbucker cover because it makes your guitar look cool. Tone is unaffected.
A straight Guitar Humbucker Pickup Ring I printed them in Matte Black “Extrudr PLA NX2” with 0.05mm Layer Height on a Prusa XL and the Smooth PEI Print Sheet
This Humbucker Mounting Plate was designed for Ibanez Gio guitars. No shell geometries were added in order to strenghten the part against the compression of the humbucker's springs.
I needed new Humbucker Cover cause mine Broke. these just slide over the Pickups and fit snuck tight. maybe u need to scale up or down for ur pickups. just measure it. i print in PLA - 0,2 nozzle. with textured plate for finish look. no…
Storage box in the shape of a guitar humbucker. The lid attaches using 8x 5x2 magnets. Includes 3 lid variations and 2 baseplates. One baseplate has the lugs removed to fit onto smaller build volumes. Dimensions are 106.4 x 47.5 x 231 (Or…
This is a flat mounting ring that will work on a flat top guitar (probably won't work on most Les Pauls). It got incorporated into my current guitar build when my pickguard routing didn't turn out as cleanly as I had hoped :/ Happy…
A mounting plate or mounting bracket for humbucker. Made for flat body surface, but fusion file is included, so can be adapted for your needs or used as a reference.
I designed a 3D model replacement for a vintage Gibson Mini Humbucker Pickup Ring. The design replicates the classic look and precise dimensions of the original, ensuring a perfect fit while preserving the vintage aesthetic of the guitar.…
This is a very simple model that i made to fit a single coil in my Les Paul clone. This is designed to fit the tele pickup from the Thomman kit into my Encore Les Paul. This may not work for every single coil so YMMV. There is a bit of…
This is a case designed to store humbucker pickups. Designed with the dimensions of Seymour Duncan pickups as reference, but should be able to store most 6-string humbuckers.
I added a bunch of pickup options for those who prefer humbuckers to single coils, including HSS, HH, HHH, and HHS if you want something more weird. Or maybe you just prefer single coil neck tone but need a humbucker in the middle. Either…
A dummy cutout model to make a routed cutout in a guitar body. Use it to binary-subtract it from your guitar body model for further 3d printing or cutting with router. 2024.03.22 UPDATE: made "earflaps" recess 1 mm longer on each side
Split the load bearing piece for a humbucker prusacaster into smaller pieces for easier printing on ender 3s and whatnot. I would recommend laying it flat for the best strength in the print. Just like any prusacaster you want a stiffer…
Humbucker baseplate replacement for Telecaster ashtray bridge mod supports needed
I remixed the neck piece and pickguard to fit a humbucker inside. The humbucker i used is a Guitar Tech branded one which came with an encore les paul so yours might not fit. As long as yours is 70mm x 30mm it should fit. The pickguard is…
This model is printable either face down or up. Enjoy!
Whaaaaaaaaaaatttt? Stratocaster HH humbucker drawing and routing jig / template. Humbuckers without frames. Two different jigs to choose from. Same dimensions, but one is thicker. The thinner one is good for drawing and the thicker one…
The Pickup Rings are designed so the Pickup is parallel to the strings, when the Guitar's Top isn't. The Higher Frame goes from 8.3mm-7.4mm The Lower Frame goes from 6.7mm-5.8mm I printed them in Matte Black “Extrudr PLA NX2” with 0.05mm…
I recently swapped some mini humbuckers with the original single coil pickups. I didn't want to use mounting rings since the pickups fit nicely into the pickguard. I did, however, want the clean look of the mounting rings. I used PETG but…
Printed in eSun PLA+, solid, since it's a small print. PLA+ has a bit of “give” and it worked well, other (regular) PLA might be too rigid.
You need supports I printed 0.2 mm layer height, 20% infill.
Support for humbucker frames lifting and setting the correct angle of inclination on old gibson firebird
Use this pickup ring to install a Mini Humbucker in a Standard Humbucker sized pickup ring. Experiment with your guitar sound. Change the color. Have fun! Designed for flat top LP Jr. bridge position. 12mm to 11mm tapered pickup ring.
This is meant to give an SSS-style Stratocaster guitar the look of an HSS-style, with its wider boxy bridge pickup. For a wood-like appearance, I used PolyTerra™ dual-wood filament in an Archimedean-chord pattern.
Hello everyone! This routing template is designed for routing cavities for mini-humbuckers. I have included a few options below with different external dimensions. The pickup cavity itself is identical across all of them, except for…
Part of the ExoGuitar project — full catalog, build planner, and assembly guides at https://exoguitar.com Plan Your Build & Get Hardware ExoGuitar can be confusing! Head over to our build planner to plan your entire build - it'll walk you…
this is a clip on and off cover for humbucker prusacaster. the hex design cuts into your arm after a while so this helps. I have a left and right handed version. This is specifically designed for the humbucker prusacaster redesign. I…
There are a few different adapter plates for humbucker replacements. I guess the fender pickups are a little bigger or attach directly to the pickguard. The two I downloaded and tried from here were way too small. This is specifically for…
Part of the ExoGuitar project — full catalog, build planner, and assembly guides at https://exoguitar.com Plan Your Build & Get Hardware ExoGuitar can be confusing! Head over to our build planner to plan your entire build - it'll walk you…
Part of the ExoGuitar project — full catalog, build planner, and assembly guides at https://exoguitar.com Plan Your Build & Get Hardware ExoGuitar can be confusing! Head over to our build planner to plan your entire build - it'll walk you…
Storage box in the shape of a guitar humbucker. The lid attaches using 8x 5x2 magnets. Includes 3 lid variations and 2 baseplates. One baseplate has the lugs removed to fit onto smaller build volumes. Dimensions are 106.4 x 47.5 x 231 (Or…