40 models
4 way intersection for Brio and Ikea LILLABO wooden train. Print-in-Place to make the intersection rotatable. Print settings: 0.2mm layer height slow down bridges and turn on fan (100%) PLA/PETG All credits go to LocoRico for that great…
This quick remix of nimel's great Clamp-It Clips adds: 3-way intersection for 3/4 inch boards 4-way intersection for 3/4 inch boards Slightly rounded facing corners to make it easier and cleaner to fit the clamps in place view-holes so…
Remix of the following designs: https://www.printables.com/model/255855-brio-compatible-standard-h-cross-track by @PrintATrain https://www.printables.com/model/329413-brio-wooden-train-tunnel by @Daniel_5163…
this a lego train track intersection [for legos only not duplo] I hope it helps you will need to break off the little tabs at the end of each rail print setting supports:no infill:15% filament:pla printer:prusa mk4
Train Track Intersection IKEA/BRIO TrainTrackIntersection_v2 is a better fit. Category: Other
This piece links up to existing Lego tracks. To secure this piece to existing track, I used 1x2 plates on either side of the railroad ties.
Print with supports to achieve best fit of the interface between sections. The photos show the short straight components, the intersection and the 15 degree corners. To complete a figure eight, an assembly of parts is needed: 15 degree…
A request from a friend combined with a desire to troll my high school aged children resulted in this ornament. Included a 2025 deboss on the reverse side of the 7 so we can remember when this ridiculousness happened when we find this in…
T-track is based off of Rockler T-track, with a width of ¾" and a depth of 3/8". ¼"-20 bolts can be used in the t track, as well as T-track specific bolts.
This version of the T track intersection is divided into four parts to be printed vertically. The previous version required supports, which did not function well. A photo is attached to show how to print them. Four of the model are…
Description: Elevate your space with the 'Cosmic Intersection', a 3D printable design that captures the essence of sacred geometry. This piece intertwines circles and lines to create an emblem of cosmic connectivity, symbolizing the…
One Piece T-Track 4-way Intersection Perfect for woodworking jigs, sleds, assembly tables, CNC, downdraft or other work table tops. Instead of paying upwards to $25 per intersection on your assembly table, just print your own for a few…
T-track T intersection Insert Use this 3-way insert to drop in a T-bolt or hex bolt at an intersection rather than from an edge. Perfect for woodworking jigs, sleds, assembly tables, CNC, downdraft or other work table tops. This…
Hi guys I made this connectors to use with the older V2 Dungeon Sticks they may work with the v3. they slide over the intersections of the sticks and add a connection point to add rooms and walls. i did a plain, steel, and stone style…
From one angle it says "Hello", from another angle it says "World". Printing “Hello, World” to the computer screen is traditionally used by software developers as the first computer program they write when learning a new programming…
There's no available CAD files for the cable channels available anywhere. This limits user made cable channels greatly, causing a lack of available useful parts like T channels and cross intersection channels. I recreated a 120mm cable…
Square on Tip with Sphere Intersection Planter If you like it, press like it! 😉 A sqare planter with sphere intersection with and without drain holes and a base for it. In my models you can find planter in a similar design with other…
I wanted to create dividers in my 13" cube storage boxes so I cut some pieces of 4mm corrugated plastic and notched them, but that didn't keep them straight, so I designed this piece to hold them together. Easy print in PLA, no supports…
Catan roads are straight. real roads need corners and intersections.
Print the same way as the original covers. Default has it joining a diagonal from the top left/lower right (when looking at the wall. Just mirror the model in your slicer to get the lower left/upper right.
4 t/b/w 12 - 15% infill. This my own design but did take inspiration from other models to create this. These would allow for more creativity for roundabouts & intersections.
Just another 6-7 illusion to roll your kiddos.
An artistic scuplture. Should print without supports - print as large as possible so that the finer strands have enough support. Please "like" this file if you collect or download it. Category: Sculptures
This package contains two Lidl Playtive–compatible road set elements designed to expand your wooden road layouts with more flexibility and realism. Included Models T-Intersection Road Perfect for creating crossroads, city layouts, and…
A sculpture to be used as a vase or pot. Twisted and bent, as life tends to be sometimes. ...but just as with life, there is an aesthetic appeal to the twisted and bent. It is designed to print without supports. If you download or…
Created the geometric shape from the intersection of 3 Cylinders
The intersection of a cube and a sphere, i.e. a representation of a sphere subtracted from a cube. See also: Union cube: https://www.printables.com/model/164593-union-cube-sphere
this model will test stringing, accuracy and acceleration control. i put my mk4 at a big disadvantage by using wet filament and pushing the speed limits
imagine this, you just made the perfect brick train eight shaped track but all your intersections are too big? or you want to make a small clover shaped track? “oh no, what shall I do.” You print this epic mini intersection with working…
T-Kreuzung für Motorcity
This cube wired model is made to make the intersection visable to my pupils. You need to print 2 of the models. Perimeters: 3 shells Infill: 10% Cubical You also need 8 magnets with diameter 8mm and height 3mm.
This script intersects an imported mesh with concentric spheres to prepare a simple structure for dual extrusion. With andresrojas cat this yields a nice tiger cat! I had to decimate the vertices with blender to make it work as it did not…
This is an intersection of pyramid and a parallelepiped. I initially learned to draw this intersection on paper for architecture school, and I wanted to see it in 3D. I modeled both the intersection and the individual solids. The points…
Incrocio auto-progettato a 8 vie compatibile con piste Brio, Ikea ecc... Riuscirete ad evitare scontri???
Same as my other remix for the plain cable covers, just with the added centipede feature from Fairaday
a three way mini intersection that fits with my other models
There's no available CAD files for the cable channels available anywhere. This limits user made cable channels greatly, causing a lack of available useful parts like T channels and cross intersection channels. I recreated a 120mm cable…
Incrocio auto-progettato a 8 vie compatibile con piste Brio, Ikea ecc... Riuscirete ad evitare scontri???
![Road Intersections (Approved Scale) [To compliment Abby and VreeDogs roadways]](https://media.printables.com/media/prints/1050852/images/8044243_5da8d9c9-50ed-4dd3-939a-d76397b4ec94_3ac0a365-733c-4eea-abe1-82837dbad957/20241030_204810.jpg)
