Jeep Keychain
6mm keyring hole 4.8mm tall (4mm base and .8mm color switch)
- Downloads
- 1,089
- Likes
- 183
- Rating
- 4.8
1,068 models
6mm keyring hole 4.8mm tall (4mm base and .8mm color switch)
I found some files for the jeep rancher angry eyes but they were separate and required super gluing or screwing on. I had issues printing these and getting it to look clean due to supports being needed so I combined the two models and…
Wall Art silhouette model of the Jeep Wrangler 392 XR. Adjustable size. I accept model suggestions or ideas you have.
Jeep Grand Cherokee's often have a small issue with the material around the cup holder. This trim is coated in chrome and becomes very sharp when it peels; damaging or at least marking whatever is placed in the cup holder.…
Desert Jeep / Willy
My little dogs push the buttons and upset my jeep. This cover stops that. It’s a tough print, and may need some tweaking because the “clips” need to be small enough to click in, but are also fragile. I would print vertically because it…
Keychains in various versions. Keychains modeled after the seat belt alarm lock. Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm. For a 0.12 mm layer - From layer 26 For a 0.16 mm layer (initial…
Mopar 55155622AB, Jeep XJ/ZJ/WJ 1997-2004 "Jeep" Emblem for hood and trunk lid Original designer: DaimlerChrysler AG, Stuttgart / DaimlerChrysler Corporation, Auburn Hills, MI. I disallow commercial use of this model. I'm not sure about…
Jeep Cherokee XJ 1 gen 2door seat trim around lever that fold seat - the crack after time best to print vertical with only neccesary organie supports as in Gcode attached, fits both sides - the same PETG Prusament - urban grey, fit the…
Stand for 3Dsets Jeep Rancher Wagon 4x4. Category: Vehicles
Mopar 55156555AE, Jeep XJ/ZJ/WJ 1997-2004 "4x4" Emblem Original designer: DaimlerChrysler AG, Stuttgart / DaimlerChrysler Corporation, Auburn Hills, MI. I disallow commercial use of this model. I'm not sure about the exact dimensions, but…
Mopar 55155620AB, Jeep WJ Grand Cherokee 1999-2004 Trunk lid "V8" Emblem for 4.7l models Original designer: DaimlerChrysler AG, Stuttgart / DaimlerChrysler Corporation, Auburn Hills, MI. I disallow commercial use of this model. This item…
If you have the Playmobil Safari Jeep, you may need the spare gas can - aka jerry can. This is an easy print. I printed it 4 walls at the finest resolution for toughness, and lightning infill because it's strong enough.
Here's a spare tire for your Playmobil Safari jeep. Long ago I designed the rim. Now here's the spare tire (TPU). This is a hollow tire, with side walls, designed to be installed onto the rim (copy provided). Once your tire is printed,…
1:64 print-in-place kit card. Assembly required Print in place kit-card toy. Use a pair of flush cutters to separate the parts then assemble the toy. I have included both a single color version and a multicolor version edit 04.03.24:…
1:64 print-in-place kit card. Assembly required Print in place kit-card toy. Use a pair of flush cutters to separate the parts then assemble the toy. I have included both a single color version and a multicolor version Jeep Kit Card:…
All my designs on Printables.com are free to download for personal use, but if you like my work please consider to buy me a coffee =) 4-Door JEEP Wrangler with removable Hardtop If you have any questions, let me know in the comments. You…
Introducing the FDM (Fixum Dude Motors) print in place Jeep. Based off of the K2_Kevin birthday model ( https://www.printables.com/model/516455-k2_kevin-birthday-model-2023 ). Find the entire FDM Collection of vehicles here:…
"Original style" Willys Jeep (1944) Size printed at 100% approximately 165mm long. The body (grill), chassis, wheels and windshield is different from my "Custom" Willys Jeep but the size is the same so you can combine the parts from the…
1:64 print-in-place kit card. Assembly required Print in place kit-card toy. Use a pair of flush cutters to separate the parts then assemble the toy. I have included both a single color version and a multicolor version Jeep Kit Card:…
For version 3 with articulated Duck Nutz visit my Cults3D profile! :) Link in bio! ←Refresh if gif is not playing
JEEP WRANGLER WITH REMOVABLE HARDTOP - SCALE 1:12 (Now updated with optional "angry eye" grill) Fully printable model kit This model does not need any additional non-3dprinted parts. OPTIONAL: LED lights from IKEA (LEDFYR) Clear akrylic…
I corrected some details of the original version, like the front grill and the key supports.
It’s a 1:64 VW typ 82 Kübelwagen on runners. Wheels spin. Easy multi color. Use a pair of flush cutters to separate the parts then assemble. Print settings: Supports: under ends the of fenders under hooks under number plate under exhaust…
This is a trailer for my Willys Jeep =) Original style Willys Jeep: HERE Custom Style Willys Jeep: HERE You can also use the big wheels from Custom WILLYS JEEP for this trailer. If you have any questions, let me know in the comments or on…
I made this Custom WILLYS JEEP in Fusion 360 and printed on my Biqu B1. The body, chassi and steering wheel was printed with bed support. Everything else was printed without support. Resolution: 0,2 Supports: Yes Infill: 15% Filament…
utilize original buttons and screws from factory key fob. perimeters 6 100% infill supports - build plate only rev4 -change shape to improve print quality (print with exterior side facing up) rev3 -stiffness increased by ~43% to help the…
SCX24 JEEP Wrangler body Category: R/C Vehicles
In this model I tried to replicate the iconic Jeep gril. This model isn't the easiest to print but certainly looks cool. The chases has the axles built-in. The wheels are separate and can be printed in TPU. I printed it on its back with…
2-door JEEP Wrangler - fully printable This is a 2-door version of my first Jeep Wrangler. You can find the 4-door version HERE . The body, vinsch and rearview mirrors was printed with bed support. Everything else was printed without…
My wife recently got a Jeep Willis, and now she's on the Ducks in the Jeep train… So I thought I would make a few custom ducks for here. Here is one of the first ones to come out. The Jeep Duck. I printed this at 0.1 mm with 5% infill, 3…
The Jeep 7 slot grill in the form and likeness of the 2018 JL and JLU model. Some FreeCAD data also included. Don't forget to wave!
Lego Army Jeep Willys 1945
I've got a 2000 Jeep TJ and wanted some place to hang my keys separate from the rest of the family. Was going to just hammer a few nails into an interesting piece of wood I found, but my son thought a jeep holder would be better. Didn't…
15% infill with 0.2 resolution This a jeep logo Print instructions Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 15 Filament: filatech PLA Red How I Designed This
My version of the Jeep duck. This stl file makes a duck 4 inches tall. I created it this big to make it easier to create the JEEP letters. I scaled the duck in the pic to 30%. I also printed this with support touching build plate. There…
Jeep Willys au format 1/23. Difficile de faire plus petit en gardant les détails. Une mitrailleuse peut être montée : https://www.printables.com/fr/model/687020-m2-browning-50-bmg-123 Jeep Willys in 1/23 format. Difficult to make smaller…
Print in Place 4th generation Jeep Wrangler. print takes around 22hrs at .2 layer height & %15 infill. You may have a little trouble on the bridging top part, unless your settings are dialed in.
Can be added directly to an existing keyring or get some keychains here:…
My wife recently got a Jeep Willis, and now she's on the Ducks in the Jeep train… So I thought I would make a few custom ducks for here. Here is one of the first ones to come out. Jason Voorhees Duck. Every day can be Friday the 13th! I…
My wife recently got a Jeep Willis, and now she's on the Ducks in the Jeep train… So I thought I would make a few custom ducks for here. Here is one of the first ones to come out. The Aviator Duck. I printed this at 0.1 mm with 5% infill,…
My friend needed a way to keep all her ducks in a row
Fully printable model of a Jeep Wrangler truck I made this model in Fusion 360 and printed on my Biqu B1. The body, chassis, rims and rearview mirrors was printed with bed support. Everything else was printed without support. 5mm steel…
My wife recently got a Jeep Willis, and now she's on the Ducks in the Jeep train… So I thought I would make a few custom ducks for here. Here is one of the first ones to come out. The Pirate Duck. Arrrrrrr! I printed this at 0.1 mm with…
I was inspired by the Thumper CJ, but my Jeep is a yellow TJ so that's what I decided to build. Once I started researching 1/10 scale model RC truck parts I realized I could purchase a rolling chassis complete with axles, transfer case,…
I designed this model to be an accessory to the Jeep Kit Card: https://www.printables.com/model/791346-jeep-kit-card The model should pe printed without supports and without a brim. I used a 0.16mm layer height.
.4 nozzle .2 layer tapered hole for times when you have elephant foot I have printed it in PLA, PETG, ABS I have no idea where the file came from, I can't find the exact match on sites picked something close because printables made me
My rendition of a Willys Jeep 1/20 scale. Finally finished printing and assembly. If you downloaded them early a few parts were updated for printability and to add a little strength to hinge points to survive cleanup and assembly. Also…
here is my jeep wrangler body for a trx4m. i print the main body and glue the details on how ever you want. it comes with the bumpers it needs to be put on a trx4m. it wont work on the normal bumpers. be sure to support the main body well…
My wife recently got a Jeep Willis, and now she's on the Ducks in the Jeep train… So I thought I would make a few custom ducks for here. Here is one of the first ones to come out. Pennywise Duck. …They ALL float down here. When you're…
I have a couple of Jeeps and have a problem that all the keys look the same. I have created these keychains to be able to print different colors and not have and still fit inside of the Jeep brand! Printed with 0.2mm layers, switching…
Introducing the hardtop version of the classic FDM (Fixum Dude Motors) print in place Jeep. Find the entire FDM Collection of vehicles here: https://www.printables.com/@fixumdude/collections/696315 Prints without supports. Sample printed…
Fully printable model of a Custom open Jeep "Gladiator style" This model has two optional chassis. High chassis and low chassis. If you use the low chassis you must also use the smaller wheels with the file name "LOW" Resolution: 0,2…
JEEP CJ7 RENEGADE - Scale 1:24 Complete model kit. The design is divided in many different parts in order to allow printing different parts with different colors. This model does not need any additional non-3dprinted parts. If you have…
2-seat JEEP with removable HARDTOP - "Wrangler Style" Update: I have now added Tube Doors Resolution: 0,2 Supports: Yes Infill: 15% Filament Material: PLA If you have any questions, let me know in the comments or on my YouTube channel .…
This Jeep Wrangler Door Handle Inserts requires adhesive tape to attach, NO DRILLING REQUIRED . You can warm insert in hot water or use heat gun to form to the slight curve of door handle. I used a small torch for a few seconds, doesn’t…
I made a nice jeep key chain for a friend at work, thought id toss it on here for all of you to enjoy too. i printed mine using the change filament at layer height function in cura.
I made this JEEP Wrangler model in Fusion 360 and printed on my Biqu B1. The body, vinsch and rearview mirrors was printed with bed support. Everything else was printed without support. 5mm steel axle L=80mm or use the printable one DON'T…
My wife recently got a Jeep Willis, and now she's on the Ducks in the Jeep train… So I thought I would make a few custom ducks for here. Here is one of the first ones to come out. The Gnome Duck. He doesn't just sit on your lawn anymore.…
Fortnite Loot Llama Jeep Duck
Introducing the FDM (Fixum Dude Motors) print in place Jeep Gladiator. Based off of the 2 Door Jeep Gladiator Concept Vehicle. Find the entire FDM Collection of vehicles here: https://www.printables.com/@fixumdude/collections/696315…
Návrh modelu: Teodor Kišiday, žák 4. ročníku ZŠ. Pro vytištění je lepší model ve sliceru rozřezat.
Detailed 3D-printable (13-step guide) Jeep Wrangler Sahara 1:20 scale kit – ready for assembly and customization. The 13-step pdf guide streamlines the process, providing clear instructions and practical tips for printing, assembly and…
I created a tube that fits more snugly than others I've seen on here. I increased the diameter of the outer tube to snap into the visor clip tight and won't slip out when it gets warm like the rubber tubes you find on Amazon. I printed…
Phone holder for a Jeep Wrangler center dash. I made it specifically for a Google Pixel 6a but It will probably fit a good chunk of phones, you may need to adjust the length of the spacer bar. I recommend gluing the spacer bar in place.
My wife recently got a Jeep Willis, and now she's on the Ducks in the Jeep train… So I thought I would make a few custom ducks for here. Here is one of the first ones to come out. Santa Duck. He brings the Christmas spirit where ever he…
Duck or duck not, there is no duck.
Male driver is based off of: https://grabcad.com/library/the-male-figure-carl Female is based off of: https://grabcad.com/library/mulher-sentada-seated-woman-human-person-1 Scaled and modified to fit as a driver and passenger in the…
I made a Bat Duck to do Duck Duck Jeep with.
Pretty straight forward, fits a Jeep JL ‘18-’24 Visor for mounting your sunglasses. I printed with PETG and with 5 perimeter's, 90% infill to achieve a solid part. You could go less but i did not feel like testing limitations at this…
Stand for 3Dsets Jeep Rancher 4x4 & Landy 4x4 & Bamboo 10/2/2020 - addes v2 upper part for much more stability 13/2/2020 - added v2 middle and bottom part, can now be screwed together 2/10/2023 - adde middle R-20 part for compatibility…
“Beep, beep, who's got the keys to the Jeep”
Keyring with the Jeep logo on it. I printed it with 0.2 mm layer, 100 % infill.
Introducing the hardtop version of the FDM (Fixum Dude Motors) print in place Jeep Gladiator. Based off of the 2 Door Jeep Gladiator Concept Vehicle. For people who wanted the Gladiator, but also wanted a stronger model without the roll…
Jeep Wrangler JK Grill Keyring, printed in Black PA (Nylon) Overture. You can print in what material you like.
This is a valve cap with a Jeep logo I made up for my Wrangler. I liked them so much I tried to sell them on eBay but was busted because it was a registered trademark…OOPS! Anyway, they certainly can't stop you from making them for your…
Made this because i didn't like the look of other ones. Print and enjoy :)
Radio clip designed to be printed fast. Slides onto the front grab handle of your jeep wrangler. Holds either a walkie talkie, ham radio, or cb radio in the curved slot.
Mount for a Tazer JL Mini. Allows you to securely mount the Tazer JL Mini under the steering column using one of the support bars and a couple of zip ties. Access hole for USB and activity light Easily pushed out of the mount from the…
For 1997-2001 Jeep XJ I used this tweeter: https://www.amazon.com/gp/product/B075W3NPQ2/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Printed in ABS then coated in chassis paint for more uniformed look. Uploaded STL, 3MF and the STP…
Duck Jeep the Marshmallow Man! Is it Stay Puff or Stay Puft???
UPADTE: this is a WAY MORE accurate version and fits as it should vs the old model I uploaded , so give it a shot and tweak with it if you want to! lol I did my best to copy the kind that's sold on amazon but I guess it can be a start for…
I wanted something extra/different that Jeep duck recipients could have in addition to the ducks. I decided a coin would be fun. It adds a little bling to the duck and a little fun to the ducking. The coin is 35mm (3.5CM) in diameter and…
I made a wrench that would be easier to open the roof in the jeep wrangler. I hope you enjoy it! How it works: https://youtu.be/ewxSTHoA8SI My Instagram: https://www.instagram.com/3deshka.rf/
Series I Land Rover SWB Print easily - multimaterial version or classic print version! Take off the card (small cutters will do), glue and build your model, it's never been easier.
This is an adapter for the later model TJs and LJs (probably 2003-2006) that enables the use of a cabin filter for the HVAC system. These Jeeps never had cabin air filters, which means all the dust you eat on the road or trail ends up…
Willys Jeep chassis and drive train. The chassis provides the frame and pretend suspension for a rolling model of a Willys Jeep. Broke it in two projects, the body and accessories to follow. All parts are PLA except tires and leaf…
Angry eyes for Rancher jeep from 3dsets.com To be glued on top of the default grill Print instructions No tested yet, let me know how it prints and fits
You can support us by purchasing our paid model to get more free products.
Little us jeep of world war 2 print-in-place with funcional wheels. Configurations: PLA 0.2-0.28mm layer height 40%infill (recommended) 40-60mm/s No need supports
You might need superglue or other strong glue that works on your filament type.