The Rock Croc Jibbitz
Ever wanted to Rock your Crocs? No? Me neither. Well, now you can anyway.
- Downloads
- 865
- Likes
- 66
- Rating
- 5
306 models
Ever wanted to Rock your Crocs? No? Me neither. Well, now you can anyway.
I made the base of the ears stronger and enlarged them. I smoothed out the back of the nose and enlarged it. NOSE Infill 20% Supports: yes 0.2 quality PETG or PLA Filament EARS Infill 20% Supports: yes 0.2 quality PETG or PLA Filament
I originally started this project 2 years ago. I never finished all of the letters, but now I'm fixing the old models as well as finishing all the letters. Ps. the .stl file requires a little bit of fixing and sizing on a slicer, but the…
I originally started this project 2 years ago. I never finished all of the letters, but now I'm fixing the old models as well as finishing all the letters. Ps. the .stl file requires a little bit of fixing and sizing on a slicer, but the…
Remixed to remove the faceting on the model. Spikes pictured printed using 0.2mm nozzle at 0.1mm layer sliced using Prusaslicer. 0.4mm nozzle will work fine as shown in the makes section.
Use these 1250 names and words on your Crocs to customize them (jibbitz)! If a name is missing or you need other words, you can easily create the STL using the included OpenSCAD file (See “Customizing” below) Or use the online customizer…
This is a combined version of the model from thingiverse so the 2 don't have to be glued together I recommend printing with supports and a brim as the part is small and will probably come of your build plate without it
A fun mix up of crocs and shrek
This model does need supports I used the free app Cura to app my supports. I used normal supports with a 25 percent infill density . I used an ender 3 to print this. It way be really hard to fit in the croc but it does get in eventually ……
A simple connector piece for you to make your own Jibbitz for your Crocs. These tend to glue down best with an epoxy adhesive or UV cured resin. It also doesnt hurt to potentially paint or clear coat these connectors for some added…
This is a NO SUPPORTS NEEDED base for a crocs jibbitz/charm. My nephew asked if I could print him a soccer jibbitz/charm for his crocs. I said sure, but then I couldn't find a jibbitz base to print without the need for supports. Even…
A small sword or pickaxe from Minecraft for your crocs
Modeled the base and one with a blank flat round top. Both are ready to add your own embellishments. Printed with supports, PLA+ works great but TPU would also be fun.
All new designs! Three different heights, and three different bottom designs. Printed at 0.16mm layer height on my Bambu Lab P1P using PolyTerra Matte Charcoal Black: https://amzn.to/3F4Dv7d Heights: 15mm 18mm 21mm Bottom design: 45…
best printed in TPU or other flexible filaments. I do not recommend PLA since it is brittle. If you want a larger surface to glue/add things to, scale the model to 130-140% in your slicer and use the base upside-down
Use the included 360 emojis on your Crocs to customize them (jibbitz)! Press “Download STL” to find them all. If an emoji is missing or you need different sizes, you can easily create it using the makerworld customizer ! Or the included…
Spikes for your crocs! Warning: They are very sharp If you like/find this model useful, please like it! It helps support me and doesn't cost you anything!
Alphabet croc jibbitz! i printed mine with a standered 0.4mm nozzle and they look great. I reccomend printing with no fan to maximize durability. I also reccomend slicing a filament change in at layer number 5. I used 3D Gloop to fuse the…
Needs supports everywhere. Fits on every croc but will have a tight fit. If you would like you can scale is down.
Needs some supports Needs a durable filament material because they can break easily when wearing them. Can be paired with the nose from the last upgrade.
Fortnite Victory Crown Croc Charm /Jibbitz
egg fry croc jibbitz use to pause at height
icecream croc charm jibbitz enjoy Category: Fashion
Croc jibbits that my kids wanted. Harry Potter Voldemort head Death Eater mark Color guard symbol These are all remixes and I want to thank the original makers of the models that I then resized and slapped on top of the jibbit stand. I…
Capybaras to make your crocs look awesome
I have printed it, just do not have a photo. Prints very well, just need to glue to jibbit
Fun little thing to put on your crocs
I like the Rock riding on my feet ;) *wink Find with finest layer height: 0.08mm Supports needed (for the ears) Brim optional (clean your build plate!)
Minion Bob auf deinem Croc... ;-) Muss mit Stützen gedruckt werden. Kann nach entfernen der Stützen einfach in die Löcher der Crocs eingesteckt werden.
Its an awsome lego jibbit. Use support for good results!
Son pins para poner en tus crocs.
Labubu Charm for Kids' Crocs Snap-n-Twist pin design. Pin is custom-sized for Kids' Crocs holes. No supports needed. Pin models with different tolerances are available @…
Pac-Man & Ghost Clog Charm / Croc Jibbitz. Both .stl & .3mf files available. Check out my other models here 👀 Hope you enjoy and happy printing 😎
This is a Heart shaped Croc jibbitz. You should print with tree supports if your printer struggles with overhangs.
Couldn't find a Jibbitz I liked that was a cross. Found Deadhorn's Cross, which I liked. Used Tinkercad to add the Crocs portion.
I liked the skull design number one and placed a modified jibbitz button under it so it could used as a Crocs shoe accessory. Print settings: .2 layer height, 15% infill supports A 17 minute print on MK4 with input shaping enabled with…
26 ji bits for every hole in your crocs
Model Stanley Cup Jibbitz for Crocs Note: I have had difficulty printing the text with .4mm nozzle, so for that reason I decided to include a file of the cup that has no text at all. This will print the easiest and fastest. Supports: If…
Shark charm croc jibbit. underside and teeth will need supports
Cute Mini Animals Charms for Kids' Crocs Snap-and-twist pin design. Pin is custom-sized for Kids' Crocs holes. Supports required for some of the charms. Pin models with different tolerances are available @…
This print will need supports I recommend 10-20%, if your 3d printer is slower you might want to lower this but it is a small print and won't take very long. It should fit into crocs, might need scaling depending on the size of your…
I printed my jibbit with a 0.4 mm nozzle and even after playing around with Cura's setting for a bit, I found that I could get the highest quality by toggling the “Print Thin Walls” button. From a far the laces look fine but if you get…
The Digital Bird DIY 3D printable Mini Jib offers smooth near silent operation combined with range of exciting new camera moves not easily achieved with a slider. The Jib connects wirelessly with all the other parts of the Digital Bird…
Need women? (or men depending on your gender) Wear this all new croc charm for free! (you have to buy filament) Court fair Maidens and leave none for your friends!
Need a Jibbit but don't want to go to the Croc store, then here is the answer. I used supports and a 0.2 mm layer height but it would be better to print with 0.16 mm layer height.
The original belt model created by @Markster69 was modified by removing the loupe and adding a generic Croc jibbit post. The model was painted with grey acrylic paint to match the belt level of the recipient. A Cricut created the belt…
The original model has some weird mesh overlaps and cavities that causes cura to have strange gaps, so this is a fixed version that is completely solid. In all other respects this is identical to the original
A nice and lovely meme to add to your wonderful croc jibbit collection
korean heart crocs charm Category: Fashion
croc jibbit 2.0: At school I usually wear crocs and, one day I noticed all my jibbits had fallen off… So I tried to print new ones but, I noticed the next day that they fell off as well. This went on for about a week, then I got fed up.…
Anyone For Your Name Printed On Your Shoes? That’s Right, With These Jibbitz You Can Write On Your Crocs. Print Settings Printer: TOYBOX Rafts: No Supports: No Notes: Print Out These Jibbitz And Decorate Your Crocs With Letters And…
It is a dog jibbitz(2 models combined)
You gotta say its cool, I mean, come on!
crown croc jibbitz use to pause at height
Introducing the Among Us Crocs Jibbitz! Designed for standard FDM machines without multicolor capabilities, Color can be added through Slicer M500 (pause at layer) Commands. The jibbitz looks best with as opaque light & dark filament!
I added 2 models together for this model. Put these on your crocs!!
A Jibbit for standard Croc hole of an AmongUS character. It is very funny and prints well, but does need support. Works great in a variety of colors, collect them all. The thickened stem fits just as well as a normal Jibbit, but is built…
Here is a Soccer ball croc jibbit! I printed mine with a 0.4 mm nozzle and I had to toggle the “Print Thin Walls” button in Cura so that so I could get the most detail. I recommend printing with 100% infill, no fan and a filament change…
This is a rabbit jibbitz or charm(i put 2 models together)
Gi Croc jibbit was created by modifying @rnunes design and adding a generic Croc jibbit post. I removed the loupe and gi layers from the original design. A Cricut created the gi and belt decals. I finished off the project by painting…
it was majorly used to add some character to my “crocs” at first now its used to send a message i personally used 0.6mm nozzle at 200C with regular fan speed and print speed(sliced in cura) the letters aren't all 26 alphabets but i'll…
Step up your shoe game with our adorable Frog Jibbitz. This fun and quirky accessory, perfect for all ages, instantly transforms your clogs into a conversation starter. Crafted from high-quality, durable material, it not only adds a pop…
Pixel dino fled Chrome for your shoe to stop dodging cacti. Now ruling prehistoric style & offline mode.
For those who want the looks of their croc to show how comfortable they are.
This is a Croc jibit with the Jordan Logo on it. Pls post any photos of makes, i'd love for this project to grow.
This is a Buffalo Bills Croc Jibbit that I printed in about 10 min with my 0.4 mm nozzle. I recommend printing with no fan, with 100% infill, change filament at layers 5 and 7. I glued the two pieces together using some 3D Gloop I found…
If you want to support me, you can send me some crypto and I'll buy a watermelon usdt(TRC20) - TPHUvYZXHKuB6Pj7wavXpkKApEzDJC83uN bitcoin - bc1qxh24prkt4mn6qv9jpyvwggnqd5nkrnx3qqsg94 ethereum - 0x9338A883Ac1bb7c75d7f6ca1A7D53c4021523369…
new crocs charm(jibits) bottom (easy install) Category: Fashion
A Jibbit for standard Croc hole of a Moai (Easter Egg Island) Head made from a bust I for from the attributed model. It is very funny and prints well, but does need support. Works great in a variety of colors, even GLOW IN THE DARK. The…
Human Skull Charm for Kids' Crocs Snap-n-Twist pin design. Pin is custom-sized for Kids' Crocs holes. Supports required for the charm. Pin models with different tolerances are available @…
A croc jibbit with the F1 logo on it. Please Like/Follow. Thank you!
Use these spooky crocs charms / jibbitz, available with 1250 different first names on your Crocs to customize them! If a name is missing or you need other words, you can easily create the STL using the included OpenSCAD file (See…
use supports but just on the overhang of the rock on the rock the frog doesnt require any. i used 15% infil and coloured it on the bambulabs slicer to make it look fantastic.
cool little duck to have on your crocs
I love my crocs, and I also like my charms. But I have a LOT of charms laying around. Then my sister wanted a keychain for her backpack and my brain clicked: let's make a jibbitz compatible keychain! So I designed this keychain in…
Modified zyn holster with Jibbit attachment for crocs
Mickey and Minnie Mouse Charm for Kids' Crocs Snap-n-Twist pin design. Pin is custom-sized for Kids' Crocs holes. No supports needed. Color change required for Minnie's bow. Pin models with different tolerances are available @…
Minecraft Creeper Charm for Kids' Crocs Snap-n-Twist pin design. Pin is custom-sized for Kids' Crocs holes. Update (6/25/2025): Charm v2. Changed from a snap-pin to a snap-and-twist pin design for a more secure fit. Available in 2…
Croc jibbit of idol from Indiana Jones.
must print with supports. the ones pictured were printed using tree supports. black one is PETG purple is PLA both seem strong.
Made this little mushroom croc accessory for the sake of the community
Fortnite Medallion Jibbit to show your friends that you play Fortnite Check Profile for more
Needs supports and i recommend printing this out of TPU
jibit for your crocs with darth vader on it
Perfect for outdoor or indoor use with your crocs! No supports required, your choice for filament.
after losing many, many croc jibbitz, i decided to fix the issue just pop this ring on the top of the part of the jibbit that goes in the croc hole that's confusing… you'll figure it out ;) also it only took me like 7 min to print with a…
Capybara Charm for Kids' Crocs Snap-n-Twist pin design. Pin is custom-sized for Kids' Crocs holes. No supports needed. Update (6/25/2025): Charm v3. Changed from a snap-pin to a snap-and-twist pin design for a more secure fit. Update…
Car Logo Croc / Clog Charms Collection Show off your favourite car brand with these easy-to-print Croc/clog charms. This collection currently includes: Citroën Honda Hyundai Lexus Mazda Mercedes-Benz Mitsubishi Opel Renault SEAT Škoda…
Print at 0.2 Layer height 0.4 nozzle size Use super glue to attach to what you want