K989 monoshock front arm
I printed in PETG, 0,2 mm, 4 perimeters.
- Downloads
- 173
- Likes
- 23
- Rating
- 0
163 models
I printed in PETG, 0,2 mm, 4 perimeters.
Original onShape project: https://cad.onshape.com/documents/0c3b8288c7b92d178ec1f3ff/w/b7a05d6d8787b131fd44b065/e/38e3f2fc0970434ac8e5aed7?renderMode=0&uiState=68fe239e2195008bbebe03d0
Updated: October 30th, 2019 01:23 UTC Changes Changed orientation in stl file If you ever removed the spacebar from your K95 RGB Platinum you may noticed that you can see the pcb. As a conclusion.. dirt e.g dust can get inside your…
*******ALPHA VERSION****** K9 COMPANION is a posable dog figurine ready to become your toys best friend. This model is a remix to the DUMMY 13 model by soozafone . The parts are designed from the ground up but keep the same joint…
Compilation of parts for my K9 from my team SG-303, plus some moded parts. Instructions avaliable in K9 - DUMMY13
Is your 600% Dummy13 feeling lonely? Does he need a friend? Why not print him a 600% K9! Using my same Dummy13 Joints+ system, I remixed TClears Dummy13 K9 model from printables to be printable at larger scales. I printed mine at 600%…
Update 25.05.2024: Added version for 4-color multicolor print (AMS & MMU). Edit: Fixed error in 3MF-file. Summary It is a model of a Honda Civic Type R (EK9) in a kit / gift card style. Some characteristic details can be discovered.…
Print another model with magnets!
This is the collection of printable parts and config files for the Easythreed K9 upgrade as seen in the video below. I'm not sure if this is something that I'd recommend, but if you're looking for a challenge, I'm not going to stop you.…
This model takes the original K9 head and slots a hole to fit standard Dummy 13 accessories in the “mouth”. Prints without supports. Print flat on the “top” of the head (i.e. the side with the ears). The 3MF is laid out correctly.
This is just a remix of the armor feet, as I wants some proper paws for the model. Generated in TinkerCad and printed on Bambu P1S.
My first attempt at modeling/remixes. I wanted to change up the K9 companion (by TClear) so that I could have little robo versions of my real life cat and dog. Printed a quick prototype in generic PLA, .20mm layer height with 15% gyroid…
This Remix adds runners to the frame and armor plates of the K9 DUMMY13 COMPANION which is itself a remix of Dummy13 by soozafone. Some Exacto work might be needed on the Armor print Print Settings: 100% scale, 0.4mm nozzle Material Frame…
A phone holder for my Ford Fiesta MK9 that fixes to the Sync3 infotainment display. It should also be suitable for a Ford Fiesta MK8, because of the same infotainment display. This model was created for an iPhone 11/XR. Printed in PLA…
Carriage designed to use Linear bearings for the Easythreed K9. The original carriages on the K9 wear out the plastic bearings so I designed this carriage to take either 2 LM6LUU or 4 LM6UU linear bearings.
Resolution 0,12 Infill 100 % Supports Yes
Replacement spacebar keycap for Corsair K95 RGB keyboard. Non standard size spacebar. Printed upside down with brim and supports in both PLA and PC.
Left Headlight Duct 3d .STL model for Honda CIvic EJ/EK (facelift version: '98-'00). Deigned specifically for K-Swapped cars with air filter on left side. Mounting holes to be drilled upon fitment. Package includes: -Entire headlight as a…
This is a remix of the race truck body by MarkerDave created for the WLToys K989 1/28th scale RC car. I've added some details to the body, closed the holes in the front and made it lighter. Width is 75mm. The body can be mounted perfectly…
The correct values for jerk have been set, voltage is adjusted, the motor is calibrated, Z-axis steps are fine-tuned, an
80mm Fan Mod Kit for GMKtec M5, M6, K6, K9 mini pc. This mod kit allows you to replace the stock top cover, which has a noisy fan and provides poor cooling for the second SSD. Since the fan grill design is just a scaled-down version of…
A spool holder positioned above the print head for the Easythreed K9 printer for easier feeding to the print head. Its only suitable for the 250g spools. It is attached to the top of the Z axis with double sided Tape.
K98 Style Bayonet Lug for MLOK Interfaces. Print orientation and supports as shown MLOK nuts required If you need anything, feel free to reach out! Questions/Suggestions/Criticism is highly appreciated. Happy Printing…
Assembly: Assemble as normal K9 companion, but add the wings and extended tail. Printing: Supports are needed.
This is a self-designed body for a WL-toys K989 rc car. The design is based on the SAAB 9-3 sportscombi but with a wide bodykit to fit the dimensions of the K989 chassis and a Hirsch inspired wing in the back. I modeled the body in…
K9 Chess set - STLs for pieces as follows: King - Great Dane Queen - Afghan Hound Bishop - Labrador Knight - Boxer Castle - Kennel Pawn - British Bulldog Sculpted in Blender (I have also sculpted a Harry Potter Wizard Chess Set - see…
The Tactical K9 Kollector is the perfect solution for dog owners who want to keep their surroundings clean while on walks with their furry friends. This innovative device allows for installing of a keyring which gives you the possibility…
The inspritation for this came from Szwalkiewicz's Corsair K70 1st gen to Stream Deck model. I liked the simple design but his didn't fit my K95 keyboard. I have redesigned it to suit. Simply print 2.
A set of drift wheels for the WLToys K989 rc car. There is a right and left wheel so that the angle of the spokes look the same. But there is no problem with putting them on either side of the car. I have printed these wheels in both PLA…
Right Headlight Duct 3d .STL model for Honda CIvic EJ/EK (facelift version: '98-'00). Deigned specifically for OEM D-Series or B-Series cars with air filter on right side. Mounting holes to be drilled upon fitment. Package includes:…
I made this keycap as a replacement for the Windows key for Corsair mechanical keyboards as entry into Prusa's keycap contest. Have fun with printing it! I learned a lot of new stuff making it :)…
Tesla Cybertruck for WLToys K989 chassis. You'll need 6 screws M2x6mm Print it with 2 perimeter and 15% infill. Chassis: http://bit.ly/3ur6jBr 6x M2 x 6mm Screw: http://bit.ly/3jy205c Go and check out my other bodies for this chassis. Cab…
Design Concept The low-poly design of this police officer and K9 unit aims to capture a modern and sleek look while keeping things simple and stylish. This minimalism maintains clarity in the concept without sacrificing recognizability.…
After breaking a lot of stock chopsticks, here is a reinforced edition. It is also more precise and limits the play at the wheels. Choose the right STL version for your balls : 3.4 - 3.5mm are for stock plastic hub carriers, and 3.5 -…
I designed this steering knuckle for my k969 because mine broke
Footrest for Toyota ProAce City Verso (2020) with automatic gearbox to protect original carpet from wear out. Double sided sticky tape is used to attach it to the carpet. Printer: Prusa MK4 Nozzle diam.: 0.4mm Layer: 0.2mm Filament: PETG…
A basic model of the ZK-SK90 Buck/Boost DC power supply module
This is another body for the WLToys K989 chassis. This time it's a Low Rider Delivery Truck. Print it with 2 perimeter and 15% infill. Chassis: http://bit.ly/3ur6jBr 2x M2 x 6mm Screws: http://bit.ly/3jy205c 2x M2 x 10mm Screws…
Magnet holder for new Skyline body
The images are self explanatory, there's an extra STL for block modifier if you want to disable fuzzy skin inside. You'll need a DC Jack and a round rocker switch. I did this for the SK90c module but probably the it'll work SK90 SK40.…
Prints on its side. 4 t/b/w 12 - 15% infill. Added a recess spot in the bottom to reduce weight and hide a peppermint.
This is a larger bumper than the stock one to protect your front drive train while driving your car fast. It can prevent breaking the turnbuckles, A-arms or steering hub carriers in case of front impact. This is compatible with WLtoys…
Great model by C4robotics, the only issue I have with it is that the pegs for the body alignment are on the top half which means you have to print it with a lot of additional supports. Plus the alignment pegs didn't look like they…
Simple filament feed guide positioned above the print head for the Easythreed K9 printer for easier feeding to the print head. It is attached to the top of the Z axis with double sided Tape.
Corsair K95 Keyboard Phone holder. Holds most if not all phones horizontally and vertically. Has slots for Caps Lock, Num Lock and Scroll Lock LEDs. Added a 2nd version (v4) that's a bit taller, has a bit tighter base so it should sit on…
I printed both parts in PLA. For smooth drifting you will have to sand down any imperfections, but it isn't necessary.
Parts for wltoys- rc cars
This is a remix of the E3DBuggy for the WLToys K989 1/28th scale RC car. With this chassis you'll have a functioning rolling E3DBuggy. The body can be mounted perfectly to the chassis. Print it with 2 perimeter and 15% infill. Have fun…
This is a model for a portable power supply built using an SK150C or SK90C module. The output can be connected to banana connectors and an XT60 connector. There is also space for a 5V USB output module. The input can come from a USB…
I wanted to make a very compact recording/streaming PC and this is what I came up with. I used a Uctronics UC-747 HDMI adapter, Uctronics UC-586 (but any 800x480 5 inch screen with the same tabs should fit), and an Acasis VS-041 /…
A cover to prevent dirt, dust or small stones getting to the gears. (This is a remix of Dionarap's design.)
This is my self-designed wheel with a separate rim and tire. This is a design that prints the rim separate from the tire to be able to swap the tires for different materials. I have printed the tire both in PLA and TPU. Print Settings…
Marvin the Martian's best friend K9 Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
WLtoys K989 or K969 (brushless) motor mount, uses original hardware and fits without modifying the chassis
Replacement servo horn for the 284131 (and k9x9) with smaller holes to allow moving to outer hole and increasing steering angle. Holes are 1mm which is very tight but works. Modify / drill the hole out a little if you want an easier time…
L stands for love! I made this keycap as a replacement for the L key for Corsair mechanical keyboards as entry into Prusa's valentine's contest. Have fun with printing it! I learned a lot of new stuff making it :)…
An enclosure for the SK90/SK40 power module, which has a sightly larger footprint than the RK6060/4KX modules. Comes with a snap-fit back cover with vent slots. The design is intended to be used with external connectors and not with…
Saint Mark9 of Bakhmut. Slava Ukraini. Fully aware of the suspension of decorum and magnification of cognitive dissonance.
Just wanted to share this easy fix. My k95 wrist rest clips broke First I tried to glue them but that didn't last long so I made these simple clips in fusion to replace them ... Just cut the remaining part of the clip about where the old…
Printing: Ring - Infil to add weight, supports needed for spade inset. Letter embossing doesn't need it. Spade - Infil to add weight, no supports Letters - Print flat, already scaled to fit nicely in the embossing Star - Infil to add…
This is a remix of my cab over race truck to make a cab forward version. Body is created for the WLToys K989 1/28th scale RC car ( http://bit.ly/3ur6jBr ). The body can be mounted perfectly to the chassis. Print it with 2 perimeter and…
clips for front fender honda civic 6 gen (ek2, ek3, etc)
Custom rims (wheels) for Wltoys K969, K989 or 284131. Can be printed with 2 colors without a special multicolor printer. Just add a stop a the right height in the slicer and change the filament during the print. The holes are very tight,…
Festool Systainer Rail (Based on @k97_1633741)
the stock rear part is broken easily, so I found a model and fixed some geometry issue and enforced it. enjoy! here is a small video on how it drives :) and one more updated: just broke the same part on the other model 284131 - and it…
Give extra clearance to your K989 with this 50mm wheels. Also increase track width to 102mm. Rim are compatible with 43.2x22 lego tires. This is not compatible with the default body shell, the wheels rub on it when you turn. Rims are in…
WLToys - Work/Display stand Introducing the ultimate display and work stand for your 1/28 WLToys RC car! Designed for both hardcore enthusiasts and casual tinkerers, this stand is like a throne for your miniature speed demon. This stand…
This is a custom body post designed for the K989 RC car. The front and rear body posts are slightly different to accommodate the front shocks. They are designed to be used with a neodymium magnet with a diameter of 10mm and a height of…
Last year, I set myself the challenge of designing a 1/28 scale radio-controlled car, and I’ve finally decided to share my model. This small RC is fast, it runs well and it's very fun to drive, but first and foremost, it's a truly fun…
Here's some wheels and tires for the WLtoys 284131. I printed the rims from PLA and the tires from 95A TPU. They get significantly less grip than the stock rubber tires which is fun for indoor drifting. I included some larger rims and…
One of the parts required for wltoys RWD conversion. Enjoy and left a comment if any improvements are needed. Also don't forget to visit my channel to get the latest updates:…
Disclaimer: Always store magazines and ammunition according to your local laws, and out of reach from children or prohibited/at-risk persons. I live alone and my local laws do not restrict open storage of ammunition, use your own best…
If you are thinking of getting this printed in PCBWay's UTR-8100 or resin, you will have to redesign the mounts and lid parts that use brass inserts. Brass inserts will crack a resin print! The print in my video cracked because I'm dumb…
The K95 platinum is a great keyboard, but the permanently affixed cable is bulky and inconvenient for quickly swapping out boards. This mod seeks to rectify that. Tested and holding up after a few months of use. This will void your…
This is V1.1 of the generic 1/28 scale race truck body designed for the WL-toys K989 chassis. This is an updated version of V1.0 https://www.printables.com/model/159977-generic-128-rc-race-truck-body The cabin is designed to be printed on…
this is an improvement of the model - https://cults3d.com/:3310458 video on how it looks: https://youtube.com/shorts/UEM4XTzH6cw?feature=share what is changed: 1) knuckle improved a lot - more durable and has it's own way to fix on the…
Larger battery compartment for the WLtoys K989 but should fit other models. Category: R/C Vehicles
(setup) Just place down your foam mats in your desired layout and then make a race track out of my piece's. Just use the (hole, size guide),use the round one to start. Start by placing the guide vertical up and down and trace around the…
This is a cover for C308/HK91/G3/PTR91/Cetme magazines to protect the feed lips. You can print them in different colors to indicate ammo types. I started with the shape from https://www.thingiverse.com/thing:1320532 and cut it down to…
3d Print: ABS No Supports Note did not model the spacers as I had 5mm high spacers Parts: Noctua NF-P12 redux-1700 PWM MT3608 Boost Converter (set to 10V, mainly because the fan flows plenty of air and prefer not to hear fan noise)(Hot…
ME 370 Motorshaft Gear. Holes on the left and right are toleranced to fit an M3 screw snugly on each side, and the hole in the middle is meant to account for any extra motor shaft not taken care of by the shaft collar it gets mounted to.…
Detailed keycap designed for printing on a photopolymer printer
I used to sell this model, but I can't afford anymore to keep a printer dedicated to the time-consuming print this model takes, so I'm making it available to the community for free. What and why? Trying to get your nose work dog to…
Highly detailed 3D miniature of a tactical K9 gnome handler with a "DOG HANDLER" chest patch, holding his service German Shepherd on a leash and pointing a command. The ultimate guard team for your garden, porch, office, or garage.
K989, 969 or Mini-Z Touring wheel
Kitana's blade to make her fan for cosplay
There I was looking forward to constructing my very own Easythreed K9 Max Ultra Pro Plus. When suddenly I realised I had ordered the wrong shape of motor. The cheapest NEMA14 motors I found on AliExpress were these , ( 6BYG1204-A-6QHT ),…
Ein Schwachpunkt der Nespresso-Maschine TK911N2 von Siemens ist die Mechanik der Tür. Leider gibt es für die Maschine - die einmal fast 1.000,- EUR gekostet hat - keine Ersatzteile mehr. Dies ist das Ersatz-Zahnrad für den Antrieb der…
The tool it comes with kept breaking so I made one.
Simple removable plugs for “K9 BBC 2004 remote controled” recommended material HIPS printed at Prusa Mini
Weil bei diesem Model von Kaldewei die Kunstoffnasen gerne abbrechen, wurde das Model eingestellt und an Ersatzteile zu kommen ist schwierig. In England kann man noch fündig werden. Deswegen habe ich nun dieses Modell erstellt. Der…
Made a replacement part for the Air Bypass Valve since I've lost it and I don't want to pay $16 and wait for shipping for a new part. NOTE: I highly suggest printing this at 105% to account for TPU warp. Print Settings Printer Brand: Anet…
Quick solution to our dog getting stuck on things like table and chair legs. Outer bumper printed with TPU to save the furniture from the aluminum cart legs. Holes sized for M4 bolts.
This is a pistol for MG gunpla kits inspired by the gm sniper K9 pistols. The grip is made to be held by the mg gundam age style hands, so it will also work with the newer MG gms, however you'll neet the trigger finger hands with the less…
Highly detailed 3D miniature of a kneeling tactical K9 gnome with a "DOG HANDLER" chest patch, holding his service German Shepherd on a leash and resting an arm on his companion. The ultimate loyal guard team for your garden, porch,…
Third person FPV mount for the wltoys k989 (will fit other models) using a FTX cam01 FPV all in one camera. Camera mounts on the rear of the base plate using the two unused screw holes. Print Settings Printer Brand: Creality Printer:…
Not sure why all the G3 handguard models out there are made for display, but here's an actually robust model. At 100% infill in ABS this is about 130g. Feel free to edit it to fit your needs. If you want this to be exceptionally good then…
Servo: https://hitecrcd.com/hs-805bb-mega-giant-scale-servo/?srsltid=AfmBOorRR1376p5IAzGzTO_FaQf2bx7lelvEVoJRratLaL3rY9aDiof2 Stepper NEMA 11 https://www.aliexpress.com/item/1005001842806192.html