Search results: ked

Sort order

1,970 models

P
Printableszuzumuzu

Magic Dice - Marked Dice - Loaded Dice - Gezinkter Würfel

This is how it works: Numerous modifications have been made to achieve a higher chance of a rolled Six. First, the side opposite the Six (One) is fully filled and therefore heavier than the other side. Second, the edges on the One side…

Downloads
1,501
Likes
102
Rating
4.43
P
PrintablesAMPDesignworks

Tweaked Headphone Holder Desk Clamp

I wanted to remove the radius overhangs on the print but realised the original STEP files were exports of the STL so I've exported clean STEP files as well as made my minor tweaks. Thread was changed to GL20 thread to hopefully improve…

Downloads
1,412
Likes
169
Rating
4.89
P
PrintablesPolymathic

Spiked Lizard (High Resolution/ Dual-Extrusion Remixes)

This was a lot of fun to remix I learned how to use several things I had never used before in Blender and I have already been asked print several of these. UPDATE 11-17-2019: Layed the models flat on the build plate for better adhesion.…

Downloads
1,130
Likes
101
Rating
4.86
P
PrintablesElectroHawk

Stacked Honeycomb part for FDM

I stacked 10 of the original honeycomb wall part on top of each other and separating them with a thin layer gap for easy separation. I also used ironing on each layer to make the separation of the pieces easier. The piece is turned upside…

Downloads
634
Likes
102
Rating
5
P
PrintablesDaniel Wyrwał

STACKED - Prusa Protective Face Shield - RC2

This is stacked version of Prusa Protective Face Shield - RC2. I added only small pieces to support visor pins. The rest of Face Shield is untouched. Gap between parts is 0.3mm. Print instructions Supports are not necessary. Print with at…

Downloads
442
Likes
1
Rating
0
P
PrintablesPeter Farell

Naked Snake

Naked Snake From Super Smash Brothers.

Downloads
220
Likes
46
Rating
0
P
Printablesudrek

Yurtle The Long Necked Turtle: Completely 3D printed!

This model uses a torsion spring to pull the head and neck back into the body. It is extremely satisfying to play with, and the model (at 100% scale) works great! I haven't had time to play around with the scaling, but I wouldn't go too…

Downloads
220
Likes
51
Rating
0
P
PrintablesCoronaSolved

Face Shield CS V2 - 1h per shield ! - 4x Stacked , easy separation - More comfortable and faster print | compatible with Prusa

Hey, After we have uploaded our Face Shield CS V2 you gave us great feedback. So now we present our 4pcs. and 8pcs. 4x stacked version. We have made a 3mf file with the right settings - especially for the transition between the two…

Downloads
205
Likes
3
Rating
0
P
Printablesvaclavh

Legendary Fidget Switch with ON-OFF Marked

The legendary @ kriswillcode 's Fidget Toggle Switch, a bit fine tuned for mass use, durability and easy print for all friends and friends of friends. Click once and you are hooked. Really addictive. Use a tiny bit of candle wax on the…

Downloads
192
Likes
24
Rating
5
P
PrintablesRyan-N2YQT

Linked Dipole Insulators

Linked dipole links. Use your preferred method to connect the wires (I use alligator clips). These can also be used as end insulators by passing the rope through the hole in the center. I printed in PETG at .3 Draft settings, and they…

Downloads
174
Likes
21
Rating
0
P
PrintablesCoronaSolved

Face Shield CS V2 - 1h/shield ! - Stacked version, easy separation - More comfortable and faster print | compatible with Prusa

Hey, After we have uploaded our Face Shield CS V2 you gave us great feedback. So now we present our 2pcs. and 4pcs. stacked version. We have made a 3mf file with the right settings - especially for the transition between the two Shields.…

Downloads
144
Likes
3
Rating
0
P
PrintablesSachMach

Skadis hooked Beaker

This beaker mounts to the IKEA Skandis pegboard. The beaker has an inside size of about 16x50x114 mm³. It holds make-up articles like lipstick and eyeliner. It shall be printed with a flat side to the printbed. Support is needed for the…

Downloads
137
Likes
36
Rating
0
P
PrintablesPavel Petr

Kedr-pole clip / Spojka kedr-stanová tyč

Clip to connect 7 mm kedr and 20 mm tent pole. I use approx. 5 pcs per meter and the hold is really good. The clips are easy to remove from the pole in case of need. Clips then stand on the kedr. Spojka pro spojení 7 mm kedru a 20 mm…

Downloads
113
Likes
13
Rating
0
P
Printableslixe

Verschlusskappe, KED Helm kompatibel

Cap that is compatible with KED bike helmets. Verschlusskappe die kompatibel mit KED Fahrradhelmen ist.

Downloads
94
Likes
2
Rating
0
P
Printablesfluetke

Phone Mount for VanMoof S2/S3 [Legacy, newer version linked in description]

IMPORTANT UPDATE There is a newer version of the phone mount for VanMoof, which includes cradles for multiple phones and will be updated in the future. This version here will not see any updates in the future. You can find the newer…

Downloads
90
Likes
9
Rating
5
P
PrintablesManny

Stacked 4 high snap in faceshields

Based on the design by made by HanochH ( https://www.thingiverse.com/thing:4233193 ) A ready to run stack of 4 faceshields. You can snap in an A4 or 8.5 x 11 transparent sheet and lock it in to place! No hole punch required!

Downloads
80
Likes
0
Rating
0
P
PrintablesPeter Farell

Wicked Tree Candy Bowl

Wicked Tree Halloween Candy Bowl. ah … this is kind of a mess … ah shucks.

Downloads
79
Likes
37
Rating
0

FabLab U. de Chile FaceShield v5 4 stacked

Stacked remix of the FabLab U. de Chile FaceShield . 4 stacked faceshields with 0.2mm separation between each one. Gcode for Ender3 printers and STL files. Print instructions Optimized for 0.4mm nozzle.

Downloads
72
Likes
3
Rating
0
P
PrintablesRedBird

Cracked egg planter

Cracked egg for easter decoration, you can add some collorfull decorations in slicer or you can paint it but i like it natural white use petg for sure pla consume moisture BTW: i use full egg and modification for the crack design bcz i…

Downloads
63
Likes
16
Rating
0
P
PrintablesPeter Farell

Cracked Egg

Cracked Egg

Downloads
48
Likes
13
Rating
0
P
PrintablesJohannes

Stacked Donut Planter (hidden drip tray, no support)

This stacked donut planter combines a modern and simple design with an easy-to-print, no-support-needed, hidden drip tray. Available in four tested sizes (9 cm, 11 cm, 13 cm, and 15 cm), it caters to a variety of plant needs. While the…

Downloads
36
Likes
17
Rating
0
P
PrintablesDavid

Modified Side Frames to allow stacked Dry Box for Complete modified Hinged lid for Original Prusa Enclosure

The Complete modified Hinged lid for Original Prusa Enclosure is a great addition to the enclosure, however, it isn't compatible with having a drybox (such as RepBox or (Un)Original Prusa Drybox , which I use) stacked on the enclosure on…

Downloads
36
Likes
14
Rating
5
P
Printablesspam 0092

Cracked pillar plantpots

Overhangs at the bottom of the pot and poor drainage will be corrected in the future. →V1.1 Improved bottom. →v1.2 improved drainage. Supporting overhangs and drainage holes.

Downloads
30
Likes
4
Rating
0
P
Printableslucasassisro

Multiboard Small Spray Bottle Holder - Bolt locked

Can be used to hold any small cylindrical object like a small spray bottle. It requires to be bolt locked to a multiboard snap using a multipoint small thread .

Downloads
29
Likes
5
Rating
0
P
PrintablesRom1

Sliding door handle, sticked

I designed this door handle to get an handle from the outdoor.

Downloads
26
Likes
3
Rating
5
P
PrintablesMads T

Gear knob for the toilet brush ( Netto' super marked)

Print it upside down, some support for the lines and letters will not harm.

Downloads
25
Likes
7
Rating
0
P
PrintablesTactile Dream

Naked Juice Bottle Fruitfly Trap

A fruitfly trap made by upcycling a Naked Juice bottle and optionally a milk straw.

Downloads
23
Likes
3
Rating
0
P
PrintablesPrusaUser113

Case for hooked lathe chisels/Gehäuse für Haken-Drehmeisel

This is a case for all of my hooked lathe chisels. Das ist ein Gehäuse für alle meine Haken-Drehmeißel. Fits for/Passend für HOLEX 297145 16 HOLEX 297120 12 HOLEX 297120 10 HOLEX 297120 8 HOLEX 297120 6

Downloads
18
Likes
1
Rating
0
P
PrintablesJérémy Reeder

Hooked Bin for Crayons, Pencils, & Eraser

Print with zero bottom layers and zero infill, but with at least 3.5mm of top layers to support and strengthen the hook. I suggest a brim for good first-layer adhesion. After printing, invert and enjoy.

Downloads
14
Likes
3
Rating
0
P
PrintablesTactile Dream

Naked Juice Bottle Fruitfly Trap Magnetic Mount

Magnetic mount for holding a Naked Juice Bottle Fruitfly Trap to a ferrous surface. Also capable of holding a Gatorade Bottle Fruitfly Trap .

Downloads
12
Likes
0
Rating
0
P
Printablesh2odragon

Pumpkin Spice can be smoked sign

100x160mm sign, reading “Did you know? Pumpkin Spice can be smoked!” with art of a smoking implement. I strongly recommend not actually trying it: but if you do please report your results, for Science and the amusement of others. Mesh and…

Downloads
11
Likes
2
Rating
0
P
Printablesmateo3D

masked guard mask

I loved squid games 2 so I made this mask so you can 3Dprint this hope you like it

Downloads
9
Likes
1
Rating
0

Naked Juice Bottle Fruitfly Trap PS:1 Magnetic Mount

Magnetic mount for holding a Naked Juice Bottle Fruitfly Trap to a ferrous surface with a PS:1 logo.

Downloads
9
Likes
3
Rating
0
P

Stackable /Stacked LEGO Brick Sorter / Sorting Box (Updated & Mini Version)

Newest Edit: 6-10-2024 New version follows the same concept as before but now the lid closes completely in both stacked and unstacked positions. Plus rounded edges for the little ones. Includes faster print time (albeit still takes a fair…

Downloads
6,947
Likes
794
Rating
4.83
P
PrintablesNatalie T

Modular 10 Inch Server Rack - Reworked

Documentation & Assembly Guide - Please Read! I've moved much of the documentation here. Many of your questions are answered here (or will be answered) as I fill it out. READ DOCUMENTATION HERE Status updates April 22, 2025 Rendered STL's…

Downloads
6,707
Likes
1,414
Rating
4.93
P
PrintablesPrusa Research

Prusa Face Shield - US stacked

Stacked version of the Prusa Face Shield - US version (RC3 version) A prototype face shield that we developed. This is a version for the US based on the community feedback, the design was adjusted to fit: American size sheet (11x8,5…

Downloads
6,331
Likes
40
Rating
4.55
P
PrintablesFrank Soul

Soul Drill: Hand cranked squeeze drill

10/12/2022: Uploaded the correct nut and lead. The first ones were mirrored. The drill was inspired by push drills such as this one by LoboCNC: https://www.printables.com/model/132326-push-drill-with-adjustable-chuck The chuck is based on…

Downloads
4,040
Likes
2,582
Rating
4.43
P
Printablesgrila007

Bookmarked Book- Bookmark

Introducing the ultimate reading accessory for book lovers: our cool bookmark with an attached STL file. Made from durable, high-quality materials, this bookmark is designed to last for years to come. The vibrant, eye-catching design will…

Downloads
4,034
Likes
401
Rating
4.62
P
PrintablesEcholalia

Tweaked Cat Key Hook (stronger, easier to print)

I really like the original cat key hook design by a-arruti , but I had trouble getting the lever to print right, and be strong enough to use. I looked through comments, and saw others were having the same trouble. I want to put several of…

Downloads
3,915
Likes
755
Rating
4.85
P
PrintablesNakozen

Wicked Witch Kit Card

It is that that time of the year again as the darkness draws nearer, and things begin to get a little bit… spooky ! A wee festive model kit of a wicked cackling witch upon her broom designed to be hung up, a perfect alternative gift to…

Downloads
3,726
Likes
1,075
Rating
4.89
P
PrintablesPeter Farell

Wicked Skull Dice Tower.

Wicked Skull Dice Tower. (UPDATED) UPDATED FILES: 4/28/2024 5:28PM CMT. NamingConvention: skulldicetowerfin (OLD FILES REMOVED) Thanks for your Input Raptor King. This is why I adore this community. Awesome feedback. New uploads have…

Downloads
3,404
Likes
1,137
Rating
4.92
P
PrintablesDeltaprints

Low Poly Bowl Designer "Cracked Stone"

Beautiful low poly designer bowl that almost looks like a cracked stone. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧 Includes STL +…

Downloads
3,341
Likes
937
Rating
4.8
P
PrintablesBastR

Mario reworked (no watermark)

WORK IN PROGRESS First, I want to thank 86duino the original author for his excellent work, we can find it on cults and thingiverse . I really like the work done but the watermark completely “distorts” Mario...so I made the following…

Downloads
3,304
Likes
1,042
Rating
4.97
P
PrintablesClough42

Gridfinity Grids - Stacked for Printing

This is a Fusion template for creating stacked gridfinity grids. These grids are symmetrical top-to-bottom, so they stack easily. Use Modify→Change Parameters to change the size of the grid and the number to stack. Grids are stacked with…

Downloads
2,924
Likes
258
Rating
5
P
Printablesicefox

Soap holder with locked filler

I liked the original design but found three issues. First the holder is too shallow for bigger soaps. Second the filler just sits freely and is easily flipped when I pick up the soap. Third the flat bottom is too slippery on flat wet…

Downloads
2,827
Likes
507
Rating
4.92
P
PrintablesFozi

Cranked / Angled Precision Tweezers - 3D Folding

I remixed the Precision Tweezers by M4NU to a cranked version. For that I chopped off the folding mechanism and added the 45deg angled legs. The folding mechanism is ideal for remodeling the legs and also in terms of “printability”…

Downloads
2,647
Likes
341
Rating
4.63
P
PrintablesFlygonial

Protean Modular Takedown Blaster

Build Guide Bill of Materials FAQ Open Beta Fileset (not all components complete) Buy hardware or printed parts at SilverFoxIndustries A spiritual successor to the Gryphon, though not a replacement. Leaning further to the direction of…

Downloads
2,626
Likes
729
Rating
4.95
P
PrintablesYardboy

Stacked HSW Wall Panels 2/4/6/8x211x248

These are 2-, 4-, 6-, and 8-stack versions of the HSW 211x248 wall panel. Print at 0.28 layer height with 5+ perimeters to avoid infill. There is a one-layer separation between each panel. Import the STEP file to your slicer, split the…

Downloads
2,477
Likes
787
Rating
3
P
PrintablesECohen

Dangerous, only for parked car - Car Tray Table for Steering Wheel

Welcome to my design adventure! My goal was simple: design a car tray for eating/working that attaches to your car steering wheel; the catch: the final product print time should be less than or equivalent to ordering the equivalent tray…

Downloads
2,449
Likes
588
Rating
5
P
Printables3D Design HK

HSW stacked print

I created the stacked version of the HSW for print with less downtime. The total print length is 9,5h on Bambulab X1E with AMS on normal speed settings. DON'T change the settings. Use Support for PLA filament or water soluble filament for…

Downloads
2,113
Likes
309
Rating
2.67
P
PrintablesVuLcAiN
18+

The source marked this model as adult content.

Downloads
1,987
Likes
1,239
Rating
4.83
P
PrintablesOchrum

Shocked Halloween Ghost

remix of suprised halloween ghost

Downloads
1,980
Likes
436
Rating
4.89
P

Ender 3 V2 Neo 'naked' fan holder

I'm pretty happy with my new Creality Ender 3 V2 Neo, though in a short time (like 2 weeks of usage) fans started to produce funny noices. Taking to account, that original fan casing hides both fans and it's impossible to see if they are…

Downloads
1,976
Likes
292
Rating
4.92
P
PrintablesOlle3D
18+

The source marked this model as adult content.

Downloads
1,707
Likes
295
Rating
4.5
P
Printablesaiber

Stacked wave spring

Solidworks model for a parametric stacked wave spring. I couldn't find a satisfactory wave spring model in Solidworks, so I made my own. It will be used in a future design. In theory it should work for extension & compression; my…

Downloads
1,652
Likes
109
Rating
5
P
Printablesjeffb0918

Tweaked Cable Chain Mounts for Elegoo Neptune 4

Please refer to https://www.printables.com/model/581649-elegoo-neptune-44pro-cable-chain and https://www.printables.com/model/596277-elegoo-neptune-44pro-cable-chain-new-90deg-mount-z/files for the full set of files you need to print for…

Downloads
1,649
Likes
115
Rating
5
P
PrintablesJaprusek

Spiked Chain

Brim-Yes Supports-Yes Layer 0.2mm Printed from PCCF, it makes a good sound, almost like metal, but PLA is good as well.

Downloads
1,513
Likes
439
Rating
5
P
PrintablesEon3D

Stego – 29 min – The Spiky-Backed Dino!

Straight from the Jurassic, here comes Stego—the cutest herbivore to ever wobble through time! With its iconic plates, chubby shape and gentle face, this speedy print is perfect for dino lovers and desk decor fans alike. ✔ Pochissimi…

Downloads
1,437
Likes
233
Rating
4.83

Marked Modular Magnetic Wrench Holders

Last Update: 2024-20-03, Updated files for 11/32 SAE Wrench Holder, previously there was a very rarely provided 7/32 SAE Wrench, I have left this in the STL files but removed from the 3D Model Files. I also corrected incorrectly…

Downloads
1,419
Likes
172
Rating
5
P
PrintablesBe Me

Hooky - the helpful Snake | multifunctional hook for awning Keder rails (Fiamma and others)

This is Hooky the funny, helpful multifunctional snake hook I designed it for multiple use cases for my Ford Nugget Fiamma F45s awning, where it does a great job. It fits in the 7 mm Keder rail and locks itself under load. It is very…

Downloads
1,410
Likes
219
Rating
4.82
P
PrintablesBratwurst88

Stormtrooper Lego Toilet Paper Holder - full and reworked

Hello everybody, this is a collection / remix I did around christmas as a gift. I basically started off with the stormtrooper head https://www.thingiverse.com/thing:4267739 as kalunho3d's description supposes I used the hands and rod from…

Downloads
1,379
Likes
249
Rating
4.7
P
PrintableshrafX

Stacked Skulls Sculpture

For FDM printers Supports: Yes (organic) Raft: Doesn't matter Nozzle: 0.4 Layer: 0.2 Infill: 15-20%

Downloads
1,362
Likes
300
Rating
4.64
P
PrintablesVRaygel
18+

The source marked this model as adult content.

Downloads
1,350
Likes
172
Rating
5
P
PrintablesSASSy Design

Modern Tradicional Wicked Pot and Planter for house plants

Nice and easy to print on vase mode with 2 or 3 outer layers (depending on the size) Material - any - we printed it using PLA :) Happy Printing!

Downloads
1,326
Likes
368
Rating
4.92
P
PrintablesRi3del

Grease injector for LMU8 bearings (reworked thread)

The injector design from @uepsie, which I received when I ordered the Zaribo 320, is pretty good. Just the thread wasn't perfect for the tube from Super Lube. So I reworked it. Now it fits real good! :) I hope you gonna like it. Please…

Downloads
1,305
Likes
170
Rating
4.94
P
PrintablesDemigodofa

(10) Stacked Honeycomb panels quicker printing

I used PLA, all your favorite flow cals etc should work great, I did mine at .2 layer height with a .4 nozzle. Your slicer will show errors, do not print with supports. The layers “floating” is why they come apart so easily.

Downloads
1,271
Likes
159
Rating
0
P
PrintablesGryn

Among Us (reworked)

This version has the top half reworked to be much easier to assemble. I have also included print files. The body has been modified to support the 6x3mm magnets (you can remove this modification in the print file to revert to the smaller…

Downloads
1,210
Likes
191
Rating
4.71
P
PrintablesTimJWatts

Gridfinity Tweaked

Gridfinity Tweaked Licence Creative Commons with Attribution 4.0 See: https://creativecommons.org/licenses/by/4.0/ Full text in LICENSE file included. Author: Tim Watts <[email protected]> Copyright: 2023 Source code: Gitlab This aims…

Downloads
1,146
Likes
231
Rating
5
P
Printablesiczfirz

Wicked Marvel Avengers Captain America Support Free Remix

Subscribe Now! -lapse print video : https://youtu.be/Mpftevek_fM Remix to support free and printed. Subscribe to find out more support free 4K Time-lapse video: Subscribe Now!…

Downloads
1,139
Likes
203
Rating
5
P
PrintablesAlgernon

Airbrush stencil ST-TX001-cracked-wall-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Downloads
1,115
Likes
225
Rating
5
P
Printableshvrkh
18+

The source marked this model as adult content.

Downloads
1,109
Likes
421
Rating
4.5
P
Printablesiceface2

Stacked Tires Pen Holder

You can find this print from a creator on thingaverse. I only modified it a little to be larger and function better with a couple more pens in the holder. I recommend printing with Black PLA at 15-20% infill. Maintain all the same…

Downloads
1,102
Likes
296
Rating
5
P
PrintablesSalvadori3D

Articulated Spiked Lizard (Inspired by Bruni)

Want a commercial license to sell my prints? Join as a member to my Patreon https://www.patreon.com/c/Salvadori3DArtworks or my Thangs https://thangs.com/designer/Salvadori3D Hey everyone! This little guy has been sitting on the back…

Downloads
1,078
Likes
108
Rating
5
P
PrintablesBrite Minis

Cloaked person (Supportless, FDM friendly)

A tightly wrapped person Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. Print video: Cloaked man - supportless FDM print - YouTube NOTE other…

Downloads
1,075
Likes
98
Rating
5

Cracked D&D dice set (D4, D6, D8, D10, D12, D20) fixed and optimized for printing

Cracked D&D dice set (D4, D6, D8, D10, D12, D20) fixed and optimized for printing

Downloads
1,065
Likes
122
Rating
5
P
PrintablesBarcode Labs

Cold Shoe Mount - 3M Adhesive Backed

This is an adhesive backed cold shoe mount. Can be used to place camera and microphone gear that utilize cold shoes anywhere you can get 3M VHB tape to stick. I specifically made this to mount a Deity V-Mic to my primary workstation for…

Downloads
1,046
Likes
44
Rating
5
P
PrintablesPetr Gaube

Ultimate Pokedex

I reused the idea from brimstone326, see the original thing here: https://www.thingiverse.com/thing:4725342 I like the idea my kid can insert a Pokemon card inside the Pokedex so I just extend it about some other features and the Pokedex…

Downloads
1,041
Likes
157
Rating
4.93
P
Printableskorniton
18+

The source marked this model as adult content.

Downloads
1,033
Likes
227
Rating
3.5

The Winter Soldier (Masked Version)

If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services. The model…

Downloads
1,032
Likes
228
Rating
5

Wicked Vase Mode Sierpinski Pyramid Fractal | Level 5

This model represents a level five iteration of the Sierpinski Pyramid fractal. Instead of being made up of individual octahedra, it’s constructed from a unique shape with extra faces, creating a bold, wicked appearance. This version…

Downloads
1,026
Likes
209
Rating
5

Medieval Palisade Spiked Barrier - No Supports

Gate and Arch - No Supports: https://www.printables.com/model/436334-medieval-palisade-gate-arch-print-in-place-no-supp Matching Wall Set: https://www.printables.com/model/435566-medieval-palisade-wall-set Lookout Tower…

Downloads
998
Likes
240
Rating
5
P
PrintablesHH

Soy fish lamp reworked

Customizing the model: If you want to customize the model, i have provided two user-parameters in the fusion-360 file: Socket clip diameter and socket y offset to change how far into the lamp your light goes (see photo). If you want to…

Downloads
997
Likes
99
Rating
5
P
Printablesmaarten

Spiked hand roller

Roller with spikes. An safe way to get some sensory impulses. fully insired on https://littleouchies.com/ so if you have the money please order one from them. Not expensive! Print without support. Layerheight not important I included the…

Downloads
965
Likes
72
Rating
5
P
PrintablesRudeytwotone

Gridfinity Grids - Stacked for Printing - with supports

Stacked Gridfinity Grids with modeled support

Downloads
958
Likes
81
Rating
4.33
P
PrintablesVincent TORDEUX

Holy Virgin Mary 3d scan of real statue reworked and poped in colors

This is a rework of a 3d scan of the Virgin Mary a seen in Lourdes. Reworked a little. very cool in pop colors. A nice touch of grace in a cool deco. Printed in adaptative layers to be fast but very precise on the hand and face. Fast and…

Downloads
953
Likes
108
Rating
4.67
P
Printablesthemightythorpe

'Cracked Mjolnir', Thor Love and Thunder

UPDATE: I've seen your comments about issues with printing the 2 halves. I've designed new versions with better structure connecting the parts. I hope these redesigns work better! Replica of Mjolnir as appearing in Thor Love and Thunder.…

Downloads
936
Likes
198
Rating
4.75
P
PrintablesPsi-
18+

The source marked this model as adult content.

Downloads
909
Likes
264
Rating
5

The Winter Soldier (Unmasked Version)

If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint

Downloads
905
Likes
196
Rating
0
P
Printablesmarkury

Naked Iris Compass (Easier Assembly!)

Edit: Added v4 lid which now has nubs for easier turning, as a few have suggested. I didn't see any remixes yet so I added this one myself :) I noticed that the original model had a tendency to come undone and you can't really see what's…

Downloads
905
Likes
188
Rating
4.92
P
PrintablesShoaib Khan

PET Strip cutter (Hand cranked )

Spinny, the strip cutter.

Downloads
886
Likes
738
Rating
4.5
P
PrintablesOlle3D
18+

The source marked this model as adult content.

Downloads
867
Likes
157
Rating
0
P
Printablesschluppy

Starlink Kederleisten Adapter LMC & Dethleffs & Weinsberg + Satellitenhalterung 35 mm

Die Anregung für den Starlink Kederleisten Adapter kam durch Gogo 4 Camper. In seinem Video hat er einen Starlink Adapter für seinen Wohnwagen vorgestellt. Dieser passte auf unseren Wohnwagen gar nicht. Von seinem Adapter ist nur noch die…

Downloads
864
Likes
52
Rating
5
P
PrintablesOut Of Marbles

Bucket Lift - Modular Marble Machine - Handcranked

We are soon launching a KICKSTARTER ! Assembly documentation can be found here: https://outofmarbles.com/pages/docs This is the hand-cranked version of our bucket lift. Check our other models for motorized version. You will also need to…

Downloads
854
Likes
100
Rating
4.75
P
PrintablesRoryoi 09

Linked Sword Roblox

3D Model Of The Iconic Linked Sword On Roblox. Enjoy!!

Downloads
854
Likes
26
Rating
0
P
PrintablesTim_tv09

Getränkedosen Verschluss (Can Wasp Protection)

Keeps annoying wasps and flies away

Downloads
830
Likes
104
Rating
4.6
P
PrintablesPeter Farell

The Wicked Ring

The Wicked Ring. Designed using Stable diffusion produced images to use as uv maps.

Downloads
797
Likes
199
Rating
5
P
PrintablesNakozen

Cooked Turkey Kit Card

Happy Thanksgiving/Merry Christmas my friends! Just a fun little turkey kit for you all. Prints quick so get a production line going and hand them out to your friends and family! Not really much else to say about this one... it's cute I…

Downloads
796
Likes
305
Rating
5
P
PrintablesVladimir Kafka

Borrani style wire-spoked wheel

A wire-spoked wheel modeled in Fusion 360. It is a scale model of the Borrani wheel for Alfa Romeo 2600, in a 1:18 scale (although it is not 100% accurate). Featured in the Prusa Academy Fusion 360 online course. Intended primarily for an…

Downloads
790
Likes
55
Rating
5
P
PrintablesMaphex

Tweaked 90Deg Cable Chain Mounts for Elegoo Neptune 4

Fixed solid holes on mount Please refer to https://www.printables.com/model/631300-tweaked-cable-chain-mounts-for-elegoo-neptune-4 for additonal parts. I only created to fix the missing holes on the mount.

Downloads
728
Likes
55
Rating
5
18+

The source marked this model as adult content.

Downloads
716
Likes
171
Rating
0