QR-code WIFI password (rickroll)
QR-code fake WIFI password Links to Rick Astley - never gonna give you up
Print approx. €2.27–€2.77 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 1,842
- Likes
- 1,131
- Rating
- 4.9
Counting matching models…
QR-code fake WIFI password Links to Rick Astley - never gonna give you up
Print approx. €2.27–€2.77 excl. taxPreliminary estimate for PETGSource material: PET
Check out QR Code Stand → here ← Dimensions: Scan This to Try Out --- Commercial Use --- By purchasing this design on Cults , you support my work and receive a commercial license to sell physical 3D prints of the model Click here to…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
🇬🇧 – English – A collection of 34 Christmas cookie cutters. Small ones, usually between 3.5 - 5 centimeters big. Collection includes: angel bell candle candy church comet cookie cross fish glove hat heart house moon mug ornament pig…
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for one variant
Adolescent Krayt Dragon Skull / Sand Dragon Skull Background on Krayt Dragons : These colossal reptiles, their hides tougher than durasteel, roamed the arid wastelands. Their howls echoed across the dunes, striking fear into the hearts of…
Print approx. €23.25–€28.42 excl. taxPreliminary estimate for one variant
This is a Full-Size, wearable Krampus Mask. It is Inspired by the traditional Krampus, a (Fictional) Creature from the Bavarian/Austrian/Swiss Alps. The original Masks are handcarved out of big pieces of Wood. This one can be 3D printed.…
Print approx. €2.19–€2.67 excl. taxPreliminary estimate for one variant
This is a movable crystal kite that is printed on the spot. You need good bed adhesion. In addition, the dragon has a kick system on the wings to extend its lifespan. It has also been tested with edge and comes off beautifully. Happy…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
if you want to prank your friend, brother or someone else? let them scan this qr code! the measurements are 70x70x5mm. step-by-step plan cura download the modle. open cura. load the modle. click on extensions top left ⇛ post processing ⇛…
Print approx. €1.84–€2.25 excl. taxPreliminary estimate for one variant
Dieses kreativ gestaltete und artikulierte „Kristalldrache“-Modell ist mit komplizierten Details versehen. Seine Flexibilität und macht ihn zu einem unglaublich realistischen Drachen. Viel Spaß beim Spielen mit diesem Drachen. Egal, ob…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
Dieses kreativ gestaltete und artikulierte „Würfeldrache/Kristalldrache“-Modell ist mit komplizierten Details versehen. Seine Flexibilität macht ihn zu einem unglaublich realistischen Drachen. Viel Spaß beim Spielen mit diesen Drachen.…
Print approx. €2.55–€3.12 excl. taxPreliminary estimate for one variant
Dieses kreativ gestaltete und artikulierte „Kristalldrache“-Modell ist mit komplizierten Details versehen. Seine Flexibilität und macht ihn zu einem unglaublich realistischen Drachen. Viel Spaß beim Spielen mit diesem Drachen. Egal, ob…
Print approx. €4.42–€5.40 excl. taxPreliminary estimate for one variant
of course it's a yeti paw, bon appetit samozřejmě že to je stopa yettiho, dobrou chuť
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
Slicer: PrusaSlicer 2.5 Nozzle: 0,4mm First layer height: 0,2mm Layer height: 0,16mm Infill densitiy: 10% Fill pattern: Adaptiv Cubic Generate Support material Alle exakten Slicer Einstellungen sind im .3mf File eingebettet Druckzeit etwa…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
Greek Krater Koozy : Charon on the River Styx With Free bonus Obol !!! Charon: The Grim Ferryman of the Underworld Charon, a significant figure in Greek mythology, is the enigmatic ferryman of the dead, tasked with transporting the souls…
Print approx. €0.44–€0.53 excl. taxPreliminary estimate for one variant
Easter egg cutters size 45 mm Vykrajovátka na velikonoční vajíčka velikost 45 mm
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET
A simple wall mount for mikrotik hAP lites.
Print approx. €1.83–€2.23 excl. taxPreliminary estimate for one variant
Krystal from Star Fox
Print approx. €9.30–€11.36 excl. taxPreliminary estimate for one variant
My version of the Dolce Gusto (KRUPS) cup holder tray. The vibrations of the machine cause the cup to move on the plate. With this modification the cup is maintained thanks to the outer rim.
Print approx. €4.30–€5.26 excl. taxPreliminary estimate for PETGSource material: PET
Lotusblüte mit den sieben Chakren und einem Om als Wanddekoration. ~ Ø195mm Gut geeignet für einen zweifarbigen Druck.
Print approx. €3.08–€3.76 excl. taxPreliminary estimate for one variant
Druhá verze krytky tažného zařízení. Stahujte a lajkujte… Budu rád za Vaše případné komentáře :)
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for PETGSource material: PET
Dieses kreativ gestaltete und artikulierte „Kristalldrache“-Modell ist mit komplizierten Details versehen. Seine Flexibilität und macht ihn zu einem unglaublich realistischen Drachen. Viel Spaß beim Spielen mit diesem Drachen. Egal, ob…
Print approx. €2.11–€2.58 excl. taxPreliminary estimate for one variant
Drucke zuerst die Datei Advent_Test (1).gcode um zu sehen, ob die Kerze passt. Einstellungen: 0.4 Nozzle 10% Füllung (Gyroid) Keine Stützen notwendig
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
Dieses kreativ gestaltete und artikulierte „Kristalldrache“-Modell ist mit komplizierten Details versehen. Seine Flexibilität und macht ihn zu einem unglaublich realistischen Drachen. Viel Spaß beim Spielen mit diesem Drachen. Egal, ob…
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for one variant
Included build instructions, printed on Prusa mini, recommend using PLA+ because it has some extra bend to it so it does not snap off. For the esteemed croc enthusiast, would be pretty sick printed in gold.
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
I designed this adapter for my Kreg track saw for hooking it up to the Rigid 1-7/8 shop vac. I found a much better solution after that from Rockler but maybe this print will be useful to someone else. It fits the original twist lock…
Print approx. €2.53–€3.10 excl. taxPreliminary estimate for one variant
Christmas Krampus Plaque Decoration / Tree Ornament
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant
I love the little Milwaukee FMCS cordless circular saw, not only for metal, but also for wood! But unfortunately there is a problem: Milwaukee does not offer a way to use the saw guided on the rail for whatever reason. To finally solve…
Print approx. €9.82–€12.00 excl. taxPreliminary estimate for one variant
Krang : Simpsons
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant
A simple system to cut and form a beautiful marzipane rose in no times. Jednoduchý systém jak během chvíle vykrojit a vytvarovat krásnou marcipánovou růži. A simple picture guide is included in the photo gallery. Ve fotogalerii přiložen…
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant
Adapter to connect your Festool vac to the Kreg 720 pocket hole Jig. I used Petg but might work with PLA. Also added the fusion 360 file in case you want to revise anything easily.
Print approx. €2.83–€3.46 excl. taxPreliminary estimate for PETGSource material: PET
Designed for 2 colour printing. I only had close colours in PLA (Gold Silk and Prusa Azure Blue) When my PETG arrives, I will reprint! The model is derived from my design for CNC machined grip panels, which are commercial.
Print approx. €2.28–€2.78 excl. taxPreliminary estimate for PETGSource material: PET
In times when everyone is talking about ecological thinking and CO2 emissions, we belong a little bit in this discussion with our 3D printers and the plastic we use for them. In combination with the Upcycling competition of Prusa I had…
Print approx. €3.82–€4.67 excl. taxPreliminary estimate for one variant
Included the solid and 2-color version with 1 filament change built-in. Print your favorite.
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
9 velikonočních vykrajovátek vajíček k barvení + váleček 5mm pro DO&DRY hmotu, kterou stačí nechat uschnout a pak děti nabarvit barvičkama dle jejich fantazie. (použili jsme tempery i vodovky, akrylové nebyly nutné) vajíčko má 9cm na…
Print approx. €3.01–€3.68 excl. taxPreliminary estimate for PETGSource material: PET
Eine simple und variable Stütze für Pflanzen, die ich hauptsächlich im Freien nutze, wenn meine frisch geplanzten Küchenkräuter noch ein wenig Halt benötigen. Translation: Deepl A simple and variable support for plants that I use mainly…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for PETGSource material: PET
Original Author Ukraine Heart is Greenmagenta .
Print approx. €2.55–€3.11 excl. taxPreliminary estimate for one variant
A collection of 30 Christmas cookie cutters. All models are in three sizes - 3.5, 5.5 and 7.5 centimetres. Collection includes: angel bell fish heart santa skate snow glove snowman tree wreath – Czech – Kolekce 30 vykrajovátek na vánoční…
Print approx. €1.68–€2.05 excl. taxPreliminary estimate for one variant
A collection of 30 Christmas cookie cutters. All models are in three sizes - 3.5, 5.5 and 7.5 centimetres. Collection includes: candle candy church comet glove heart pig present snowman sock – Czech – Kolekce 30 vykrajovátek na vánoční…
Print approx. €1.32–€1.61 excl. taxPreliminary estimate for one variant
Crass cress bowl 1.0 Can also be used as a waterproof soap dish. My color choice was a mistake, but maybe I'll make a second and a slightly smaller version. Use a layer hight bigger than 0.1 mm because with 0.1 mm the overhang did not…
Print approx. €5.39–€6.59 excl. taxPreliminary estimate for one variant
Türschmuck in Herzform mit dem Text "Love"
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant
It is here, after your long search it is found. This print is very simple for Ludicrous Speed printing. Good luck and may the schwartz be with you.
Print approx. €1.29–€1.58 excl. taxPreliminary estimate for one variant
A wall mounted holder for the Kreg Automaxx 76mm wood project clamp. I only have this size of the clamp, but it will probably fit other sizes of the clamp as well. Printed in PLA, infill 40, bottom down with pain-on-supports under the…
Print approx. €2.90–€3.55 excl. taxPreliminary estimate for one variant
Priehľadný akrylový kryt som použil z atrapy bezpečnostnej kamery od výrobcu ORNO typ OR-AK-1210. Priesvitný kryt z uvedeného typu atrapy pasuje presne na vymodelované kolíky v hornej časti krytu. Pre fixaciu sú použité 4 ks podložiek ,…
Print approx. €0.55–€0.68 excl. taxPreliminary estimate for one variant
A horseshoe is said to be a symbol of luck, so it probably shouldn't be missing among the cookies. you can make the nail heads yourself when you use a skewer to remove the dough from the cutter :) podkova je prý symbol štěstí, tak by asi…
Print approx. €0.30–€0.36 excl. taxPreliminary estimate for PETGSource material: PET
Die Kreisel selbst besteht aus drei gedruckten Teilen. Der Zentrierring verbindet Oberteil und Unterteil. Einfach den Ring eindrücken und schon ist alles fest verbunden. Zur Abriebsicherung der Spitze sollte ein kleiner Ziernagel in die…
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant
Hack up your allen keys , heat key up and insert into handle.
Print approx. €16.31–€19.93 excl. taxPreliminary estimate for PETGSource material: PET
UA Coat of arms, larger version, check dimmension pictures for exact dimmension of file, on the emblem is used small filet to enhance plastic effect. Scaling in slicer should work well also. Color change happening in 6,20 height, included…
Print approx. €1.87–€2.28 excl. taxPreliminary estimate for one variant
These are Kristina's unique bird and flower-themed side panels for the modular lantern. I created various prints from her design: There are simple solid three-colour prints and variants where the leaves or the flowers create cut-outs.…
Print approx. €4.65–€5.69 excl. taxPreliminary estimate for PETGSource material: PET
Bartmannkrug : Beard Man Mug Bartmann jugs were very popular, not only in Germany, but also abroad in the 16th and 17th centuries. They even reached the New World.
Print approx. €17.76–€21.70 excl. taxPreliminary estimate for one variant
Fits Akro-Mils small plastic drawers, which can be found on a variety of Akro-Mils Plastic Bin Cabinets (i.e. 64 drawer, 48 drawer, etc.). Tray (vs. printed and/or stock dividers) prevents small parts from slipping underneath the…
Print approx. €1.56–€1.91 excl. taxPreliminary estimate for one variant
If you're going with the STL file, supports should be added for the half-circle USB connector « emplacement ». Printed at 0.3 mm layer height. The 3MF and GCODE files already contain the needed supports and a color change at half-height…
Print approx. €3.15–€3.85 excl. taxPreliminary estimate for one variant
Vocal mike holder- 5 mm clamping part. Conical shape at the top 34mm at the bottom 30mm, height 64mm. Držák mikrofonu - 5 mm upínací část. Kuželovitý tvar nahoře 34 mm dole 30 mm, výška 64 mm. Printed from pla+. I recommend the supports…
Print approx. €1.64–€2.00 excl. taxPreliminary estimate for one variant
Just a basic cookie cutter to support Ukraine. Use the large one for actual cookies, small for play-dough.
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
Potřeboval jsem cedulku k parkovacímu místu a tak jsem vytvořil tuto. Je vytvořena tak, aby bylo možné po vrstvách měnit barvy filamentu, přikládám hotový GCODE v PLA. Barvy jsem měnil v pořadí bílá, černá, modrá, červená.
Print approx. €4.07–€4.97 excl. taxPreliminary estimate for one variant
The cover was modelled to be identical to the original. The original covers become fragile with age and crumble. Printed in Prusament PETG, no supports, 0.15 mm layer height (to make the fillets nice), 0.4 mm nozzle. Left and right models…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
Easter egg - Velikonoční vajíčko
Print approx. €0.64–€0.79 excl. taxPreliminary estimate for PETGSource material: PET
Box for Kraftform Kompakt VDE 17 Universal 1, 17 pieces set . Requires 8 strong 3x2mm magnets to hold cover.
Print approx. €6.01–€7.34 excl. taxPreliminary estimate for one variant
Kronos Skull Model with Stand (optional) Collection: BadAssGodCollection (more in progress) Printed on: Prusa MK4 and Bambu P1S Material: PLA Scalable: Yes (I have uploaded a pre-sliced file at 50% size.) Supports: Yes (organic / plate…
Print approx. €1.02–€1.24 excl. taxPreliminary estimate for one variant
[EN] You can find the description in English below [ES] Tapones para Pocket Hole Estos tapones para pocket hole son la solución ideal para ocultar de manera limpia y profesional los orificios de los tornillos en tus proyectos de…
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for one variant
Five-leaf piston flower cutter that is used to cut out marzipan flowers for decorating, for example, cakes. / Pětilisté pístové vykrajovátko květiny které slouží k vykrajování marcipánových květin na zdobení například dortů. When…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
We are releasing this design for free on the first anniversary of Russia’s invasion of Ukraine (February 24, 2023). In the past year, this magnet has raised over $500 in support of kids in Ukraine affected by the war through UNICEF.…
Print approx. €2.42–€2.96 excl. taxPreliminary estimate for one variant
Heart Chakra symbol
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET
Quick Guide to changing filament~ Have some paper to protect print from and push away extruded filament. When the MK3 jogs after a change it will spit out another inch, so I follow it with paper until it starts to move back down. Doing…
Print approx. €0.80–€0.97 excl. taxPreliminary estimate for one variant
Ukrainian Folk Design Santa Skull Ornament.
Print approx. €4.37–€5.34 excl. taxPreliminary estimate for one variant
This emblem is can be mounted on a metallic surface as a magnet or just placed on a table using the printable stand. Printing instructions : Material used: PLA (Royal Blue and “Oh my gold” gold Prusament filaments) Layer Height: 0.2mm…
Print approx. €3.44–€4.21 excl. taxPreliminary estimate for one variant
Dies ist eine Kappe, zum Abdecken der Lenkradverschraubung eines IHC 453. Meinem Mann gefällt es. Einzelteile ausdrucken, zusammenfügen fertig.
Print approx. €1.98–€2.42 excl. taxPreliminary estimate for PETGSource material: PET
Originally AI generated and cleaned/modified heavily to look like an actual print and be able to be printable. It is a take on the original mini fig of Skrill from How to Train Your Dragon. I've printed it with an Ender 3 V3 SE using…
Print approx. €2.62–€3.20 excl. taxPreliminary estimate for one variant
Soporte para ROUTER MIKROTIK CRS125-24G-1S-2HND, para montar en rack de 19"
Print approx. €5.25–€6.41 excl. taxPreliminary estimate for one variant
This print will help you to keep your small Kreg Clamps organized. To mount it uses 2 Hillman's Wall Dog 1-½ inch Hi-Lo Steel Pan-Head Philips Anchors which are found on Amazon and at hardware stores like Home Depot in the United States.
Print approx. €3.92–€4.79 excl. taxPreliminary estimate for PETGSource material: PET
The original print was for wide mouth jars, this remix is for regular mouth (2 ³⁄8″ for the inner diameter and 2¾” for the outer diameter), print diameter is 67mm. The original was a 2 piece print, this re-mix is one piece. The original…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant
This 3D tea light model has been designed to create awareness for the war in Ukraine. Do not let the light go out for Ukraine. Please share a photo of your printed version in this thread to show each other the support for Ukraine. You are…
Print approx. €3.44–€4.20 excl. taxPreliminary estimate for one variant
zakrytování kolejnic železničního přejezdu H0, kolejnice ROCO Line 2,1mm. Pokus o imitaci gumových dlaždic
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Coin with the Ukrainian "tryzub" engraved in it. Uses art from PublicDomainVectors.org .
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
Its a tight fit for the wow stick metal stand, but you can gently push it into the print. Print instructions Print with pla.
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant
Yet another portafilter tamper. I wanted one with a nice round top so I could easily palm it to better control the tamping pressure and just didn't find one out there.OpenSCAD included so you can tweak 'till your hearts content :) GCode…
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant
Show your support for Ukraine by printing out this Ukraine ribbon! If you have any suggestions for improvement, let me know! Happy Printing, - Ty10y
Print approx. €0.91–€1.12 excl. taxPreliminary estimate for one variant
/CZ Velikonoční zajíček Je jednoduchý na výtisk i na sestavení. Vytisknutého králíčka buď můžete rovnou vzít a dát na špejli ( u některých špejlí bude potřeba špejli lehce upravit aby tam šla ) A nebo do dírky na špejli dáte třeba…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
Root Chakra symbol
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET
Ukrainian Cyrillic Alphabet
Print approx. €0.84–€1.02 excl. taxPreliminary estimate for one variant
Kulatá krabička pro rybářské háčky a jiné drobnosti. Round box for fishing hooks and other small items.
Print approx. €3.16–€3.86 excl. taxPreliminary estimate for one variant
I bought dividers for my storage boxes but they fitted quite loosely. So I designed this stabilizer to put on the crossing dividers so they stay at a 90° angle. At 100% this model fits for dividers with 3mm of strenth. I recomment…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
third eye chakra symbol
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET
V případě, že se Vám výtisk povede, prosím přidejte fotografii. DĚKUJI If the printout is successful for you, please add a photo. THANK YOU Kryt na přední ozubené kolo. Pasuje na model Shimano FC-MT100 (40-30-22T) rozteč děr na připevnění…
Print approx. €1.80–€2.20 excl. taxPreliminary estimate for one variant
(Deutsche Beschreibung unten) This stand is suitable for storing and serving all kinds of shot glasses. Thus, from an empty spool of Prusament, you can make two shot glass stand. No screws are needed. The handle is printed in two halves.…
Print approx. €4.18–€5.10 excl. taxPreliminary estimate for PETGSource material: PET
Krabička je tisknutelná v kuse s podpěrami především na místě pantů. Rozměny jsou 110 x 80 x 12 mm. --- The box is printable in one piece with supports especially at the hinges. The dimensions are 110 x 80 x 12 mm.
Print approx. €3.18–€3.89 excl. taxPreliminary estimate for PETGSource material: PET
My 9-year-old daughter is wanting to help support Ukraine, and decided to make cookies to sell, donating the proceeds to the relief effort in Ukraine. I designed this cookie cutter for her cookies - she plans to make simple sugar cookies,…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for PETGSource material: PET
By my opinion raft-only (sheltie-raft only.stl) version is tough enough, choice is yours. Verze bez střední kruhové výstuže se mi zdá dostatečně pevná sama o sobě. Printed with PLA (0.2) Infill doesn't matter, 10% - 15%
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
I resized the design to fit a 51mm Portafilter and adapt it to the thickness of the notches of the model.
Print approx. €1.92–€2.35 excl. taxPreliminary estimate for one variant
Ideální lopatka na každodenní úklid klece. The ideal scoop for daily cleaning of the cage.
Print approx. €2.34–€2.87 excl. taxPreliminary estimate for one variant
Box / Pillbox with Love and two compartments. / Krabička (na léky) se srdíčkem a dvěma přihrádkami,
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
One of the magnets is of the Ukrainian Flag and the other is the outline of Ukraine. There are holes for two ~12mm diameter x ~1.75mm thick neodymium magnets (available on Amazon) to be put inside during the print. I used a trick in…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
Round about 30x20x7.5mm with a width of about 2mm Change the color at 10mm Also check out my remix where I created a keychain out of it.
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
Sacral Chakra symbol
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for PETGSource material: PET
Ein einfacher Eiskratzer der jedes Eis bricht :-) A simple ice scraper that breaks any ice :-)
Print approx. €2.32–€2.83 excl. taxPreliminary estimate for one variant
Wera style Kraftform Handle with Changeable Hex Bit Color coding hex bits You can create a color change at 13mm to 15mm on the Hex bits to color code them Supported bits Normal Hex bits Long 25mm Hex Bit adapter Allen key 2.5mm - if you…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for PETGSource material: PET
Opravný díl ke karavanu euro mobil tištěno s MMU a materiál doporučuji ASA nebo ABS
Print approx. €4.00–€4.88 excl. taxPreliminary estimate for PETGSource material: PET
This is a replacement battery cover for the KINEX caliper. The design is not like the original but it works perfectly. I printed on a PRUSA XL: Filament: Prusament PETG Galaxy Black 0.25 mm nozzle 0,12 mm layer 2 perimeters 100% infill 4…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for PETGSource material: PET
Shopping cart key. Push the key straight into the carriage, unlock and pull the key out again, it couldn't be easier.
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
The nozzle connects the hose to the vacuum cleaner. According to multiple websites it is compatible with devices from Siemens, Bosch, Grimi, Krups and Pitsos. For 35 mm Ø hose (Hose outer diameter 40mm). I personally used it for the…
Print approx. €1.47–€1.79 excl. taxPreliminary estimate for one variant
CZ : Kamarád mě požádal o nakreslení a vytisknutí jednoduchého krmítka pro andulky podle vzoru které používal 8 let. EN: My friend asked me to draw and print a simple bird feeder for budgies based on the model he had been using for 8…
Print approx. €5.91–€7.23 excl. taxPreliminary estimate for PETGSource material: PET