Search results: lidl

Sort order

539 models

P
Printablesmarek

Háček na kuchyňku Lupilu z Lidlu

Ulomil se nám původní háček u dětské kuchyňky a tak jsme si vyrobili podobný. Můj tisk: na ležato, ať je pevnější Support manuálně vyznačený na středu spodní hrany PETG použity 4 perimetry Zatím vše drží a funguje

Downloads
5
Likes
3
Rating
0
P
PrintablesTeddyminator

Lidl Parkside Battery 20V XT60 Adapter

Hardware: 4x M3x8mm either sockethead or countersunk screw work. 2x Red spade connectors small length of wire or cable 2part epoxy or other glue XT-60 Connector (the one I used:…

Downloads
2,609
Likes
449
Rating
4.92
P
PrintablesDIY_CYBERPUNK

Universal Plastic Lid Hanger/Holder (IKEA 365+, Lidl, No Brand, etc.)

I had a collection of no brand silicone and glass containers with plastic lids like in IKEA 365+ containers and wanted to print one of the existing hanger models. I couldn't find much on printables but found some good examples on…

Downloads
2,470
Likes
560
Rating
4.92
P
PrintablesMarkus710

REMOVABLE Shopping Cart Coin / Einkaufswagen Chip / Aldi / Lidl / Key

Works on the most Shopping carts in germany. Push it in turn it sideways and remove it.

Downloads
2,283
Likes
176
Rating
4.95
P
Printablesjanth

Universal Plastic Lid Hanger/Holder (IKEA 365+, Lidl, No Brand, etc.) without Screw Holes

For detailed information, please check the original model . Please only comment here regarding the missing screw holes; anything else should be commented with the original model here .

Downloads
2,134
Likes
904
Rating
4.63
P
PrintablestomasN

Lidl Playtive / Ikea compatible wooden train rails / Koleje pro dřevěné vlaky Lidl Playtive / Ikea

To extend my son's wooden railway kit I originally printed some tracks from this set . It has a great variety of model, but unfortunately the connectors are too big to fit (at least the current) version of Lidl/Playtive wooden tracks. So…

Downloads
1,556
Likes
211
Rating
4.96
P
PrintableschiptronCZ

Flexible rails for IKEA LILLABO, BRIO, LIDL train track with male-male or male-female ends

Flexible rails for IKEA LILLABO, BRIO, LIDL train track Flexible rails which help to easily build the train track compatible with IKEA LILLABO, BRIO, LIDL The difference of this rails is the end - sometimes you need male-male of…

Downloads
1,532
Likes
525
Rating
4.83
P
PrintablesDJ

Lidl Dishwasher tablet dispenser

Based on the great model by @ KaliM. UPDATED VERSION v3 on December 1st 2024. Changes : Walls are thicker (3 layers) Vertical hole at the front is bigger: easier to guide tablets going in Hole to retrieve tablets is bigger (vertically &…

Downloads
1,474
Likes
493
Rating
5
P
PrintablesJousty_xx

Bosch L-Boxx / lboxx Adapter für Lidl Parkside Performance Werkstatt Staubsauger PPWD 30 A1/A2

This is an adapter for mounting the Bosch L-Box on the Parkside Performance vacuum cleaner. 6 parts need to be printed. I printed the plug connections and mechanically stressed parts with 100% infill. If you have any questions or…

Downloads
1,473
Likes
119
Rating
5
P
PrintablesG3ox

Lidl pegboard hook (Parkside / Powerfix)

UPDATE 09.01.2023: I created a stronger version for heavier tools and with an extension on the left to better handle forces from one side (for the extension on the right just mirror the model in your slicer). I have also included the…

Downloads
1,399
Likes
236
Rating
4.67
P
PrintablesFr3D

Lidl Parkside X20V-Team Ikea Skadis 20V Battery Holder

I couldn't find any low profile battery holders for my Parkside X20V Team batteries, so I remixed one! I designed this way back in 2020, but never published it. Sorry about that, here you go! If printed in the pictured way you don't need…

Downloads
1,217
Likes
212
Rating
4.83
P
Printablesschuetzi99

trimmer blade using zip tie for Bosch, Güde, Einhell, Lidl

This is an adapter to use cheap zip ties as trimmer blade. It was made for a "Güde Rasentrimmer 250/18 RT Set", but this kind of blades is also used from other trimmer brands like Bosch. If this thing works for you, pleas leave a commend…

Downloads
788
Likes
104
Rating
4.33
P
Printableshalac

regular triangle rail cross - ikea brio lidl kaufland

Regular triangle rail cross for wooden railway by Ikea, Brio, ... Recommended printer settings: Perimeters: 3 Layer height: 0,2-0,3mm Infill: 10-20%

Downloads
761
Likes
129
Rating
5
P
Printablesppeterka

Lidl Powerfix pegboard hexagonal pattern tool holder

Modifications on the original Hexagonal sscrewdriver holder: reinforced the center part to make it more robust added pegs for the 38mm Lidl Powerfix pegboard Enjoy! Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No…

Downloads
643
Likes
90
Rating
4.6
P
PrintablesProsten

Penholder parkside/lidl pegboard

A simple holder for the parkside pegboard for pens and other penshaped objects

Downloads
613
Likes
99
Rating
5
P
PrintablesJim

Pegboard holders set (Parkside/lidl)

Just few holders for pegboard from Lidl (Parkside).

Downloads
608
Likes
123
Rating
5
P
Printablesppeterka

Lidl Powerfix Pegboard Tools SDK

I thought it would be good to have a few "base" parts for further development of holders for the Lidl Powerfix pegboard, so I remixed a part, and created these configurations: single peg, horizontal base 2 pegs, horizontal base 2 pegs,…

Downloads
604
Likes
114
Rating
5
P
PrintablesRaymondKelly

Lidl Parkside Clamp 90 Degree angle Corner UPDATED

For Lidl Parkside Clamps. To Fix The corners of two wooden boards. UPDATED --> to optimize the force angel when you use boards with diffrent thickness. Clamp_90_LIdl_Parkside_IN_FLEX_Part_1 Clamp_90_LIdl_Parkside_IN_FLEX_Part_2…

Downloads
597
Likes
143
Rating
4.71
P

Rotation key for Monsieur Cuisine knife (LIDL Thermomix)

Printed with PETG but PLA should work aswell.

Downloads
533
Likes
50
Rating
5
P
PrintablesMiguelitocaf

Caja porta objetos panel herramientas Lidl, Parkside

Caja Box porta objetos para colgar en los paneles de herramientas de la marca Parkside (Lidl).

Downloads
462
Likes
73
Rating
1.67
P
PrintablesRadek Věchet

Lidl PlayLive coffee maker (espresso machine) for dollhouse

Big hunkin' coffee espresso machine scaled for dollhouse by Lidl PlayLive. It has some place on top to store coffee cups. You can pick model with or without handle for easier print or more accurate representation. I recommend to print…

Downloads
428
Likes
95
Rating
5
P
PrintablesOdysseos

Hammer holder for Lidl Pegboard

I remixed the Hammer holder by NasBoc to adapt it to my pegboard from Lidl/Parkside. I have removed the wall mount holes from the original model and added a two vertical pins bar to fit the Lidl/Parkside pegboard. I also made another…

Downloads
409
Likes
58
Rating
0
P
PrintablesCreni

Nozzle cap for sealant cartridge (metal or plastic thread) - Parkside (lidl) o-ring

Useful to keep opened cartridges (silicon, construction adhesive..). You'll need an o-ring (inner diameter: 20mm, diameter 3.55mm) to ensure a tight fit. I found mine in a parkside o-rings box. I printed my caps in PETG (0.2 layer height)…

Downloads
407
Likes
74
Rating
5
P
PrintablesEdo

Lidl/Parkside pegboard pliers holder

Simple holder for pliers to put on a pegboard (Lidl/Parkside). Only for small pliers, as in the photos.

Downloads
397
Likes
44
Rating
0
P
PrintablesDanAndersen

Allit Basic 33 / Allit VarioPlus Hobby 33 drawer insert ( Aldi Workzone, Lidl Parkside) Kleinteilemagazin Schublade

The small parts organizer “Basic33” / VarioPlus Hobby 33 (old version with flat frontface) by Allit is often sold via supermarkets like Lidl as a Parkside product and Aldi and Hofer (Austria) as a Workzone product. They come with a very…

Downloads
388
Likes
70
Rating
5
P
PrintablesAndres L

Monsieur cuisine connect Handle V2 (LIDL THERMOMIX)

Edit: Added a version without the extra screw and a lip to avoid rotation (experimental, not tested yet) This is the second version for the handle for the MONSIEUR CUISINE CONNECT (the copy of the Thermomix from Lidl) I printed it with…

Downloads
378
Likes
34
Rating
4.57
P
PrintablesZdendys

String head replacement for Lidl Parkside Florabest grass trimmer

Replacement head for grass trimmer from Lidl (Parkside PRTA 20li A1). String is more cheaper and longer life than plastic blades. The head is tested a nice hold string. The thread is lefthand. No supports needed. I printed it from PETG…

Downloads
375
Likes
67
Rating
5
P
PrintablesJonBoyJones

Parkside (Lidl) 20v Battery Wall Mount - Screw on

Sturdy Little Bracket for 20v Parkside Batteries Tight Fitting to the battery suitable for use even in vehicles, battery will not pop out Other battery mounts available : Sealey Battery Mount Screw on fitting, Designed to be mounted by 3…

Downloads
374
Likes
39
Rating
5
P
PrintablesIJK_CZ

Lidl Glider RC conversion set

ENG: This is complete set for RC conversion of Lidl Glider. Cotrolled by wing rotartion, using two servos of HXT900 size. The center parts are in two variants - with full cage for servo and with reduced size and weight. Wings connected by…

Downloads
360
Likes
58
Rating
0
P
PrintablesJakob G.

New Wing for LIDL Glider BETA

A new Wing for the old version of the trusted LIDL-Glider with a wingspan of 1100 mm and an better airfoil (RG-15). Most of it needs to be printed with LW-PLA (Vase-Mode) and some smaller parts with regular PLA. DOWNLOAD THE ZIP FOR…

Downloads
343
Likes
35
Rating
5
P
PrintablesFrenchyAU
Downloads
341
Likes
41
Rating
5
P
Printablesquibeck

Lidl Parkside Battery USB-C Adapter(20V XT60)

youll need the : PD65W Schnelllademodul Typ-C USB-Schnittstelle unterstützt PD3.1 QC3.0 SCP PPS Schnellladegerät 5V 9V 12V 20V - AliExpress 502 for normally 1,51 € 4x M3x8mm -two cable -2x spade connectors

Downloads
337
Likes
95
Rating
5
P
PrintablesSam

Lidl Parkside compatible 6 blades cutting disc

This is a work in progress for the PARKSIDE® Mower robot smart PMRDA 20-Li A1, 20 V This cutting disc allows to double the amount of blades on the mower. I wanted to see how this behave. Hence I decided to build my own. I need to buy…

Downloads
329
Likes
19
Rating
3
P
PrintablesRastajan

Drill with countersink box / Krabička na vrtáky se záhlubníkem z Lidlu (Parkside PSB 6 A1)

The set of countersink drills Parkside PSB 6 A1 (like most of Lidl /Parkside tools) is sold without box for storage or transport. That's why I designed this box. The box consists of two parts base(.stl) and lid(.stl) connected by a simple…

Downloads
326
Likes
59
Rating
4.56
P
PrintablesJV

LIDL pegboard hook

simple hook for LIDL pegboard having square holes spaced at 24mm. Category: DIY

Downloads
321
Likes
41
Rating
4.5

Lidl Glider VTOL Plane

Hi Everyone! This project is my first attempt at building a functional Ardupilot VTOL Plane. Check out my new video to learn more about this project: As mentioned in the video, VTOLs have many advantages over both traditional planes and…

Downloads
319
Likes
43
Rating
0
P
Printablesonionlabs

Hexagonal Paper Towel Holder for Lidl Pegboard

Just a nice-looking towel holder with Lidl's pegboard hooks. Does it's job. Printed with cheap 12€/kg no-name PLA using 0,8 nozzle and 0,55mm layer height just for the sake of speed, no specific guidances on this topic. Just remember…

Downloads
319
Likes
64
Rating
4.75
P
PrintablesKarkovski

Kaufland/Lidl wall organizer boxes

These are the boxes for Kaufland/Lidl wall organizers. They are roughly in the dimensions of original boxes, but my goal was not to replicate them and make them stackable, but to replace/print more of the chosen size. Thus, they are not…

Downloads
315
Likes
64
Rating
5
P
PrintablesStanley

Lidl Parkside X20V Team Battery Adapter for Tiny e-Lab

This is Lidl Parkside X20V Team battery adapter for Tiny e-Lab. Thank to this adapter and any Lidl Parkside X20V Team LiPo battery (2Ah or 4Ah) you can take your Tiny e-Lab anywhere. Adapter consist two parts: Front (pannel) and rear…

Downloads
306
Likes
80
Rating
5
P
Printableshvrkh

Special Tracks for LIDL/IKEA/BRIO Wooden Railway

Special Tracks for LIDL/IKEA/BRIO Wooden Railway Expand your LIDL/IKEA/BRIO railway sets with this unique set of special tracks. This model allows you to expand or replace tracks in your LIDL/IKEA sets. The set includes various types of…

Downloads
304
Likes
52
Rating
5
P
PrintablesTeddyminator

Lidl Parkside Battery 20V Cover

Hardware: 4x M3x8mm either sockethead or countersunk screw work. Top: 0.2mm with varible layerheight Bottom: 0.2mm layerheight I printed them in PETG but I see no problem in printing them in PLA. I'm happy to answer questions just leave a…

Downloads
274
Likes
58
Rating
5
P
PrintablesVojtěch Urban

LIDL pegboard bit holder

A simple PEGBOARD bit holder from LIDL. The slats can be easily removed and the body of the holder can be moved repeated

Downloads
272
Likes
46
Rating
5
P
PrintablesEddie Miller

lidl Glider canopy

A modified canopy for the Lidl Foam glider

Downloads
268
Likes
18
Rating
0
P
PrintablesDimitri Fendel

Zahnrad Aktenvernichter Lidl / UNITED OFFICE shredder

Aktenvernichter Zahnrad / Shredder Gear Großes Zahnrad: 47 Zähne 45 mm durchmesser 12 mm breite kleines Zahnrad: 10 Zähne 16 mm durchmesser 12,5 mm breite Big gear: 47 teeth 45 mm diameter 12 mm wide small gear: 10 teeth 16 mm diameter…

Downloads
266
Likes
8
Rating
5
P
Printablesfluetke

Motor Upgrade for LIDL Roller Blinds

Small smarthome motor upgrade for roller blinds recently sold at LIDL or compatible models. Made with easy installation and small space requirements in mind, without modifying the original blinds to much. Everything done here can easily…

Downloads
257
Likes
63
Rating
0
P
Printables3D IDEA

Lidl Logo

it is an easy print so there aren't any recommended settings.

Downloads
252
Likes
4
Rating
0
P
PrintablesHitex

16 teeth drive gear for Playtive Railway Set train from LIDL

Kids broke train drive gear so I modeled it in Tinkercad and fixed it. Fits very snuggly. Printed in PLA 0.15 layer height and 100%.

Downloads
251
Likes
16
Rating
0
P
PrintablesPreisJIV

Remix: Dental Flosser with Spool Holder for "dentalux 80 m" from Lidl

What matetial to use and how see the original model. Update: I have designed an alternative lid construction for those whose threading may not work. And wall mount for 4 dental flosser holders P.S: Their diameter measures 7.4mm. If their…

Downloads
239
Likes
62
Rating
0
P
PrintablesFrenchyAU

lidl/parkside/horusdy pegboard peg template

few pegboard peg templates to be introduced into an existing design for attaching to a Lidl/Parkside/Hoursdy Pegboard

Downloads
236
Likes
34
Rating
0
P
Printablesfreedom2000

Lidl V2 glider motor mount

Here is a motor mount for Lidl glider. It is designed for 2021 Mk2 version of this glider (nose is bigger than initial V1 version) Goes well with aeropic's mod : https://www.thingiverse.com/thing:4031359 It has the exact diameter to fit…

Downloads
232
Likes
22
Rating
5
P
PrintablesMichal Fiala

Lidl pegboard box holder

Holder for small boxes to lidl parkside pegboard. It is functional for more box systems. Tried to two types of boxes (as photos). Print setup depend on your printer and filament quality. I used PET filament, 20% infill, two perimeters and…

Downloads
230
Likes
54
Rating
5
P
PrintablesBurgstall

Measuring tape and calipers holder for pegboard (Lidl / Parkside)

It started with the pegboard not coming with a suitable peg for calipers... I made a small shelf for measuring tapes and calipers. I think I came up with a smart way to attach stuff to the pegboard (no doubt somebody has come up with…

Downloads
227
Likes
56
Rating
5
P
PrintablesTomas Netrval

spojka koleji playtive Lidl

track clutch Playtive Lidl

Downloads
226
Likes
15
Rating
5
P
PrintablesDavidK

Lidl Crivit LED Bike Lamp Holder

Original fixing part had broke. Inner diameter is 24mm to fit rubber cut from old tube to prevent slipping.

Downloads
209
Likes
25
Rating
3
P
PrintablesBurgstall

Hex bit holder for peg board (Lidl / Parkside)

I seem to be always losing especially the small torx bits, so I decided to design a holder for peg board where I have 3 of each size that I normally use, TX10, TX15, TX20, TX25 and TX30. This way it's easy to see when I am running low on…

Downloads
207
Likes
51
Rating
0
P
Printablesppeterka

Caliper holder Lidl Powerfix pegboard

I liked the original design, but it lacked the pegs going into the slots, so remixed it with my pegboard toolkit's 2 peg base. I also slimmed it down a bit in places. The downside is that printing this one requires supports... Enjoy!…

Downloads
203
Likes
35
Rating
5

Lidl pegboard hook w/holes

Remix, holes added

Downloads
203
Likes
38
Rating
4.5
P
Printableshvrkh

Compatible Tracks for LIDL/IKEA Wooden Railway

This model allows you to expand or replace tracks in your LIDL/IKEA railway sets. The set includes straight tracks in various lengths from 35 mm to 180 mm and 90° curves. And set also includes curved tracks in various lengths and angles…

Downloads
198
Likes
44
Rating
5
P
PrintablesOdysseos

Knipex Pliers Wrench Holder for Lidl/Parkside Pegboard

This is another holder for the Knipex pliers wrench (model 87 01 250). It fits the Lidl/Parkside pegboard. My Printing Settings Nozzle : 0.4 Layer Heigth: 0.2 mm. Infill: 15% Supports: YES

Downloads
195
Likes
34
Rating
4
P
PrintablesAfruzu

PARKSIDE LIDL BATTERY DRILL SUPPORT (similar to Dremel)

In order to use both hands with the Parkside-Lidl PFBS 12 pen drill, I designed this simple two-piece holder that is easy to apply and remove. The decision to keep the device blocked mainly by friction in the rear support stems from the…

Downloads
194
Likes
36
Rating
5
P
PrintablesAndres L

Monsieur cuisine connect Handle (LIDL THERMOMIX)

########################################################## V2 version released (07/2021): Improves grip and it's easier to print https://www.prusaprinters.org/prints/71097-monsieur-cuisine-connect-handle-v2-lidl-thermomix…

Downloads
184
Likes
10
Rating
0
P
Printablesondravojta

Windows and balcony door for Lidl Playtive Dollhouse XXL

This nice Lidl Playtive Dollhouse XXL comes with front door only. So I have created widows and balcony door which fits perfectly to prepared holes. Hinges are created using small piece of raw 1,75 mm filament. In my case the hinges works…

Downloads
181
Likes
42
Rating
0
P
PrintablesLukas Knejp

Parkside / Lidl - Držák tužek pro nástěnný organizér na nářadí ( Pegboard Penholder )

Držák tužek pro nástěnný organizér na nářadí z Lidlu ( Pegboard Penholder ). Varianta 11,5 mm pro obyčejné tužky, a 17 mm pro fixy a silnější popisovače. Jednoduchý tisk s minimem tiskových podpěr.

Downloads
176
Likes
34
Rating
0
P
PrintablesBeardedBabs

Lidl Parkside X20V Team Battery Adapter

Original: https://www.thingiverse.com/thing:4866839 Recut with a little more tolerances (rails and ends). Added ID pin (required for a project of mine)

Downloads
174
Likes
20
Rating
5
P
PrintablesOdysseos

Knipex Pliers Wrench Holder for Lidl/Parkside Pegboard

This is another holder for the Knipex pliers wrench (model 86 05 250). It fits the Lidl/Parkside pegboard. My Printing Settings Nozzle : 0.4 Layer Heigth: 0.2 mm. Infill: 15% Supports: YES

Downloads
169
Likes
23
Rating
0
P
Printablesppeterka

Lidl Powerfix Pegboard additional additional pegboard tile layer

Yo dawg I herd you like pegboard, so here is a pegboard for your pegboard... Ok, some explanation on why this might still be useful: For example, if you hang longer tools like screwdrivers on the pegboard, they obstruct a lot of valuable…

Downloads
168
Likes
31
Rating
0
P
PrintablesBrooklynspeedy

Lidl Stikeez icebox

Lidl Stikeez icebox :D

Downloads
167
Likes
14
Rating
4.5
P
Printablesj.pinter

Stone bridge pillar for a wooden train - compatible with Brio, IKEA, LIDL

Tisk možný bez nutnosti podpěr. Výplň 10%, výška vrstvy 0,2mm, materiál PLA. Printing possible without the supports. Infill 10%, layer height 0.2mm, PLA material.

Downloads
164
Likes
25
Rating
5
P
PrintablesManuel

Hooks for the ParkerSide (Lidl | Powerfix) pegboard

My pegboard had too much empty space and I run out of hooks. Instead for using an existing hooks design, I chose to create my own, and get to know how to actually design models. There are different pegboard form ParkerSide. The hole…

Downloads
164
Likes
19
Rating
0
P
Printableskiklhorn

Clutch for 600W Lidl Silvercrest Stick blender

Spojka pro ruční mixér SSMS 600 C3 z Lidlu. Když se zasekl nástroj tak původní spojka povolila v tisícihranu a motor se otáčel naprázdno dál. Tím neříkám že tahle nepovolí... Netuším jestli je to nejlepší volba, ale tiskl jsem z PLA, 100%…

Downloads
164
Likes
6
Rating
0
P
PrintablesDanAndersen

Partsdrawer Replacement for Allit Basic 33 (Aldi Workzone, Lidle Parkside) small parts drawer (Kleinteilemagazin)

If you already used my Label-Covers or Drawer Inserts for the Allit Basic 33 / Allit VarioPlus Hobby 33 drawer inserts (Also sold by Aldi Workzone “Kleinteilemagazin” or Lidl Parkside drawer), you may be interested in this one as well: I…

Downloads
158
Likes
19
Rating
0
P
Printables7effrey

Ikea Lidl Brio Train Track

Sometimes existing tracks on thingiverse were too tight for our Ikea and Lidl tracks. So made one that fits.

Downloads
153
Likes
19
Rating
5
P
PrintablesDr.MStar

Lidl Playtive Screw and nut (šroub a matice)

A screw and nut for Playtive work table for kids. Version 01: compatibility with original tools compatibility with original holes the printed screw and the printed nut works well together the screw works with an original nut the printed…

Downloads
149
Likes
10
Rating
0
P
PrintablesMarcopolo

CIEN tissue box Large and Small (Lidl)

Printed with PLA. Makes a nice cover to hide the paper box. Tested with Kaufland and Lidl boxes but it's probably usable for other brands too. Large one fits boxes up to 91mm tall. Small one fits boxes up to 65mm tall.

Downloads
149
Likes
28
Rating
0
P
PrintablesOUBRECHT.com

Redukce dřevěných kolejí Lidl Playtive / Ikea na Lego Duplo | Reduction wooden train rails Lidl Playtive / IKEA to Lego Duplo

Redukce dřevěných kolejí Lidl Playtive / IKEA na Lego Duplo. Ideální pro stavění mostů. Reduction of wooden train rails Lidl Playtive / IKEA to Lego Duplo. Ideal for building bridges.

Downloads
147
Likes
22
Rating
5
P
Printablesalarmba

Organizer LIDL pilniky Extol

Držiaky na pilniky, dosadacia plocha je elipsa, nie kruh.

Downloads
144
Likes
44
Rating
0
P
PrintablesCrashy23

Stackable Train Pillars - brio/lillabo/lidl compatible

These train pillars are designed to provide stable and reliable elevation for your wooden train tracks with the ability to stack. These pillars feature a solid, one-piece construction, offering a fixed height for creating bridges,…

Downloads
143
Likes
14
Rating
5
P
PrintablesChodec

Toaster clip (Silvercrest, Lidl brand)

New clip for sandwich toaster. I recommend to print it from some high temperature filament, in my case PA12CF15.

Downloads
143
Likes
17
Rating
5
P
Printablesjeepers01

Quick clamp Plunge saw adapter for LIDL Parkside track **Updated**

Quick clamp Plunge saw adapter for LIDL Parkside track *** Update 19May24 *** The track clamp had a failure when cutting down a door so it has been redesigned as Version 2. This now has side flares to strengthen the body significantly.…

Downloads
143
Likes
26
Rating
5
P
Printablessamh

IKEA Skadis - Clip for (Lidl) Powerfix Magnetic Tool Holder Strip

An IKEA Skadis compatible clip for the Powerfix magnetic tool holder bar sold in Lidl. These clips are designed to hold the bar in place regardless of whether force is applied to the bar upwards or downwards, hence the upwards facing part…

Downloads
141
Likes
38
Rating
5
P
PrintablesFuWeissinger

Holder for SilverCrest (LIDL) SmartHome Zigbee power strip / Steckdosenleiste

A simple holder for this cool SilverCrest Zigbee power strip. No supports needed, it can be printed with PLA or PETG

Downloads
141
Likes
21
Rating
5
P
PrintablesMatyas

Lidl Pegboard hooks

Collection of different hooks for Lidl pegboard. The hooks are more robust than original ones to withstand more forces. Printed with PETG, 4 wall layers.

Downloads
140
Likes
24
Rating
5
P
PrintablesFrenchyAU

electric screwdriver bit holder for Lidl/Parkside/Horusdy Pegboard

electric screwdriver bit holder for pegboard

Downloads
139
Likes
12
Rating
5
P
Printablesalarmba

Organizer LIDL - skrutkovače (okruhle otvory)

Kotvenie je do dvoch otvorov pod sebou. Skrutkovač stačí zdvihnuť o 10mm a zobrať. Po nasadení zostavajú kolmo, nekývaju sa.

Downloads
136
Likes
36
Rating
0
P
Printablesppeterka

Lidl Powerfix pegboard multimeter holder

This is just a 2 part multimeter holder for the Lidl Powerfix pegboard, and the commin el-cheapo multimeters. This allows the multimeter to be used as-is, while on the wall. Removing is a bit more complicated this way, but this is what I…

Downloads
134
Likes
24
Rating
5
P
PrintablesAvise

Nerf Dart Holder for Lidl's Powerfix Tool Wall Organizer

Nerf dart holder for the Powerfix tool wall organizer from Lidl. Yes, I proudly display my Nerf guns on the wall of my office. :-) Update 03.05.2018.: Widened the dart holders by 0.2 mm to account for the printing tolerance and avoid…

Downloads
134
Likes
20
Rating
5
P
PrintablesMartin

Lidl / Parkside pegboard tweezers holder

Simple holder for tweezers compatible with parside pegboard

Downloads
129
Likes
20
Rating
4.75
P
PrintablesAngelo Ledda

LIDL Logo Multicolor (on same layer and single extruder)

Project: Multicolor LIDL Logo for Single Extruder 3D Printers Description: This project presents a multicolor rendition of the LIDL logo designed for single extruder 3D printers. The photo showcases the outcome achieved through the…

Downloads
128
Likes
5
Rating
5
P
PrintablesSchehlein

Soap Dispenser - Replacement for Cien (Lidl) - 2 different designs

Print the container and the correspondent lid (with the negative volume which you can find in the .3mf files) and glue them together. Print the container solid and use clearcoat für sealing.

Downloads
127
Likes
34
Rating
4.67
P
PrintablesJakvex

caliper holder Lidl/Parkside Pegboard

little bit broken model, but in slicer wokrs fine printed on default works well, i use honeycomb infill .

Downloads
126
Likes
14
Rating
5
P
PrintablesTritschi

Compartment for Handy (magnetic) Tools (Lidl Parkside)

Avoiding of disorder in my drawer tool box and thus avoiding breaking the tools I designed this box. I printed this box with two perimeters and really low percentage of infill to save material. Parts fit best in the box, box is safely…

Downloads
126
Likes
37
Rating
5
P
Printablesj.pinter

Bridge with stone pillar for wooden railway - compatible with Brio, IKEA, LIDL

Snadno složitelný a rozložitelný most, u kterého si můžete měnit jeho vzhled a délky dřevěných kolejí. Bočnice mostu se nepřichycují na pevno ke kolejnici, ale zasazují se do pilířů. Pilíře lze použít samostatně nebo s více vzory mostních…

Downloads
125
Likes
20
Rating
5
P
PrintablesMi7o

Small storage box for Lidl's Powerfix tool wall organizer

Remix of this storage found on thingiverse , adapted for the new Powerfix panel attachment system, with the round attachment.

Downloads
125
Likes
18
Rating
5
P
Printables...No...Name...

Lidl wall clock upgrade

it is good to print the centers of the numbers on a textured mat top side down. you don't need to print the outer pieces, I did them because of the glowing filament. if you print everything well they fit together nicely...or use violence :)

Downloads
124
Likes
32
Rating
5
P
PrintablesCoolBlackCat

Lidl/Parkside Pegboard Accessory - Wrench 6-20

I created a whole set of holders for my tools on a Lidl/Parkside pegboard. Check for the other holders on my page. Fusion 360 files attached for personal adjustments.

Downloads
123
Likes
14
Rating
5
P
PrintablesBoA

Lidl Silvercrest salt/pepper mill final drive gear

Lidl Silvercrest salt/pepper mill final drive gear replacement part for https://www.lidl.pl/p/silvercrest-mlynek-elektryczny-do-soli-lub-pieprzu/p100339179002 Recommended material: PC, Layer: 0.2mm, Wall count: 4;

Downloads
120
Likes
21
Rating
0
P
PrintablesEdo

Lidl/Parkside pegboard files holder (x6)

Simple holder for 6 files to put on a pegboard (Lidl/Parkside). Only for medium-sized files, with the neck as 10 mm or similar, as in the photos.

Downloads
120
Likes
12
Rating
5
P
PrintablesOld Lady

Pegboard (LIDL) Accessories

Accessories for the perforated board (LIDL/Parkside) to keep tools within easy reach. To ensure greater durability, I used PETG and set the wall thickness to 3. I've been using this board for a few years now, and it keeps the tools I need…

Downloads
119
Likes
32
Rating
0
P
PrintablesJohannes E

Street Puzzle (compatible to Lidl's Playtime)

We own the Playtive Wooden Streetset from Lidl . But we always hat not enough parts, so I just printed them. But of course you can just use the printed ones, without the wooden ones. Printed in R3D PLA Filament in Matte Ash Gray , which…

Downloads
117
Likes
20
Rating
5