1,895 models
The original alien figure was modeled and shared by thingiverse user Icenvain. Thing: 2039374. I used Tinkercad's sketch tool to sketch the hands. I used Meshmixer to sculpt it into a new shape. Print this at 80% to 100% for a phone…
Print approx. €3.05–€3.72 excl. taxPreliminary estimate for one variant
A sci-fi cubic plant pot or planter for your plants. The design is inspired by the amazing Subnautica series! Mainly by the Precursor structures. Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 2…
Print approx. €2.30–€2.81 excl. taxPreliminary estimate for one variant
I modified the chpola33 thingiverse model. ( https://www.thingiverse.com/thing:3364149 ) The matchbox designed for Red Roosters Pipe Matches may have different sizes from ordinary boxes. After printing: I sanded the box a bit and "shaded"…
Print approx. €4.02–€4.91 excl. taxPreliminary estimate for one variant
Easy to make a happy Alien keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €5.36–€6.55 excl. taxPreliminary estimate for one variant
Inspired by the original Balancing Acrobats , this redesign takes the challenge to a whole new level. While the original focused on vertical stacking, this version introduces wild, multidirectional chaos. The unique geometry allows you to…
Print approx. €4.25–€5.20 excl. taxPreliminary estimate for one variant
Organic tablet stand Printing instructions: In order to print this model you need to download PRUSASLICER 2.6 Let's start by importing the model into Prusaslicer 2.6, at this point we need to divide it into 2 parts with the procedure…
Print approx. €16.23–€19.84 excl. taxPreliminary estimate for one variant
A headband with tentaclesis a must-have for your party. No glue is needed, but it can be useful. You can print the tentacles as I uploaded, it will increase its strength in the narrow part. Just add supports. Or upload my project where…
Print approx. €3.18–€3.89 excl. taxPreliminary estimate for one variant
Aquatic / Alien Head Bust. Its hollow so you can turn it into a lamp. Open section in back for wires or cord.
Print approx. €14.92–€18.24 excl. taxPreliminary estimate for one variant
I wanted rollers where the bearings were a bit wider apart as I had a spool pull off when they're closer together, also doubled them up for spools next to each other on the RepRack to feed the Palette. I used 8x20mm metal pins (Amazon aff…
Print approx. €3.63–€4.43 excl. taxPreliminary estimate for one variant
Smart Gun: Aliens vs Predator
Print approx. €3.45–€4.22 excl. taxPreliminary estimate for one variant
This is a quick Tinkercad design to solve the issue of the Logitech Brio 4K Camera mount covering a small amount of the top of the Alienware AW3423DW OLED Gaming Monitor. I used Prusa PETG in Black. Pictures are in draft mode but works…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
EN: The offspring insistently demanded, that the Ikea Aftonsparv Soft Toy Alien (ours is called ‘Günther’) should also sit at the table. So we immediately had to find a suitable seat for Günther that could simply be clamped to our 25 mm…
Print approx. €6.06–€7.41 excl. taxPreliminary estimate for PETGSource material: PET
Hello, I have for you Alien, xenomorph from Prometheus, Covenant . A nice character from the cult alien. It is really scary and completely authentic. Nice for exhibition and coloring. I really like these characters. Good luck with the…
Print approx. €23.11–€28.25 excl. taxPreliminary estimate for one variant
Outer dimensions : 113.3 x 34.75 x 53 mm Inner dimensions : 105.80 x 27.25 mm
Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant
Ahh... The SunRay1. Beautiful design, but very flawed... Slow and prone to power supply failures. Well, the only part of this that we can fix here is the fact that the plastic stands are rarely included in eBay auctions. They are a…
Print approx. €35.98–€43.98 excl. taxPreliminary estimate for one variant
A custom alien skin for the HyperX Pulsefire Saga mouse. The color printed in the photos is Matterhackers Pink-Blue Silky Magic PLA.
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for one variant
This is meant to be my 2027 bead for the Force Field Festival. The above is a work in progress until I can test the MMU version. Make sure to print with supports and I'd recommend a brim, Multicolor coming soon! Category: Accessories
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
How Xenomorph is made - https://youtu.be/Upa737w-dKQ
Info: I have taken great original model from @OneIdMONstr (thanks!) and had an idea how to make bigger alien facehugger which is still fully print-in-place bent tail & fingers allow: much longer tail (tail has 41 particles, instead of 11…
As a huge alien fan I made this standing alien sculpture. It is print in one peace. My first try is 10cm tall. It came out petty well, just 2 fingers broke… I'll try out a bigger version soon. In addicinal I'm working on another pose, if…
A playful extraterrestrial take on the classic “See No Evil, Hear No Evil, Speak No Evil” concept. This collection features three stylized gray alien figurines sitting in the iconic poses — covering the eyes, ears, and mouth. The figures…
Xenomorfo Alien stampato con pla Polymaker Polyterra Cotton White,ATTENZIONE:I SUPPORTI SI DEVONO RIMUOVERE CON ATTENZIONE E DELICATEZZA SOPRATUTTO NELLA ZONA DELLA CODA E DELLE MANI PER EVITARE DISTACCAMENTI E USARE STRUMENTI ADATTI COME…
Alien Xenomorph - Fan Art
You'll have to excuse the part names, I didn't know the correct technical term for most of them… I made this model as the others available online weren't all split by color and were over complicated in the number of parts (some containig…
Are you a fan of the Alien Movies? Wish you could 3D print a bust of it? Done! I present to you, Xenomorph Alien Bust. I printed it in EIegoo PETG Rapid to achieve, well whatever they promote. I sanded it first with a Scuff pad, then a…
Awesome model created by PaulElderDesign https://www.thingiverse.com/thing:1693443 You find PaulElderDesign over on Etzy I liked it so much I've scaled it up to fit my printer. I have stripped back the pieces to allow for easy printing in…
Enter a new dimension of strategy with this 3D printable alien chess set . Unique horror design : biomechanical alien-inspired pieces including pawns, rooks, knights, bishops, queen, and king. Highly detailed : intricate textures and…
My Etsy shop here: https://www.etsy.com/listing/4510203095/alien-xenomorph-3d-printed-sculpture?sr_prefetch=1&pf_from=shop_home&ref=shop_home_active_1&frs=1&logging_key=2556fbefeed79bdc8648fb177258d99dc1bc8de8%3A4510203095
I would like to share with you little cute monsters 😉
JOIN MY PATREON FOR MORE! :PATREON : LAYERABLES 💙 Free Stitch STL – Chibi-Style Fan Art for 3D Printing Download this adorable Stitch-inspired fan art STL completely free! This cute, big-eared alien pup is modeled in a charming chibi…
A great Wall Art of alien's evolution. Do not forget to upload your makes and LIKE the model, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) Inspired by a sticker “Evolution” Wall Art…
Christmas ornament by Vlado Turek Print instructions Comeplete Christmas ormanent collection that we have prepared for you. Jo Prusa Deadpool Stormtrooper Cthulhu Jack Skellington Alien Krampus Grinch Optimalized for SLA resin printer…
Alien - Xenomorph - Full Figure - support test from twitter joseph prusa account original from https://www.myminifactory.com/fr/object/3d-print-alien-xenomorph-full-figure-25-cm-82660
An Alien Facehugger I sculpted in Zbrush and then 3D printed. I've released the STL files for others to make their own. The finished figure should be around 150mm tall but obviously you can resize it as needed. The legs are very thin…
This is an updated version of my Aliens Dropship. This one is scaled to 300mm and fully printable. It is print verified. May 2022 Update Added a complete zip file. The import from Thingiverse left a lot of files out. Please download the…
Simple Alien, this guy is to dam cool to loose the file if the other site goes down.
Alien - Xenomorph Can Holder (two types) #1 #2 Fits long EU cans with a capacity of 0.5L . You can also use my insert for 12oz cans (link below) Recommended print settings: PLA, 0.2mm layers, 2-3walls, 8-10%gyroid, Tree supports (at least…
took the model, made it bigger and split it up to print on my Neptune 3 Pro and cut a spot for my nose to fit no supports maybe a raft for the tail if you want printed in PLA @ .2 layer height
It's HUGE! It stands about 6 inches tall. It's semi coiled and if it could be stretched out it would be over a foot long. This makes it life-size! You'll need supports and you'll need them dialed in well!
This 3D model represents the iconic head of an alien xenomorph, featuring its sleek, elongated shape and menacing, tooth-filled jaws. Designed for resin 3D printing, the model is mounted on a detailed base, making it an excellent display…
Reupload from https://www.thingiverse.com/thing:1116392 took while Talk to the creator have fun!
Commercial use is NOT allowed for this model
You can open it in your CAD-Software and insert a writing for example. If you want some medal for the first place for example look at my other models. includes medals: -1st Place -2nd Place -3rd Place -Cocktail I printed this with red and…
I modified my alien model and made a bust. Just scale, print and enjoy print in one piece, supports needed Show you makes and let me know if you want another stand.
UPDATE: I now have a matching dropship! See my Facebook group for info! This is my 1/35 scale APC from the Aliens movie. Assembled with the main gun stowed, its about 265mm long. Its a fairly simple model, split into about 60 pieces to…
## Diseño conceptual Esta figura de bebé alienígena presenta un diseño detallado y encantador, capturando la imaginación y ofreciendo una pieza de exhibición única que llamará la atención de todos los amantes de la ciencia ficción. ##…
Dies ist ein Standfuß für den HP T640 Thin Client. Der Fuß kann entweder aufgeclippt werden oder mit M2x8mm zusätzlich geschraubt werden. Gedruckt habe ich in in PETG, für mehr Flexibilität. PLA sollte auch gehen. Bitte auf die…
My version of a crouching xenomorph ready to strike. Enjoy! Update July 2024. I scaled this up to full size and will use him as a prop for Halloween. You can view the video about this alien on my YT channel at
My 2 passions/Hobbies for a very long time has been Aliens/Predator collecting and LEGO. Very recently I have added a new passion: 3D Printing!! Only 2 months into this but I'm having a Ball!! I'm thrilled I can combine all 3 passions and…
Aliens APC, connecting pieces of filament, pins and gluing, m3x8 and m3x10 screws needed viz galeri fotos APC wheels rotate and turn in sync, rotating and sliding cannon, rotating front cannon, sliding side doors, interior from side door…
Found this amazing Alien Queen done by Sandon https://www.thingiverse.com/thing:2090893 Unfortunately he has a NO Derivatives license. Totally his call to protect his model from dilution and to honor that I can not upload the changes I…
This is a mashup of a Snail and Alien Xenomorph we sculpted as I wanted one for my front porch. Use gyroid infill at 5%, drill a 1" hole in the bottom, and fill it with plaster to give it weight so the wind won't take it away. It's a easy…
There are two versions of the head. One with eyes and the other with the eyes printed separate. The eyes are a bit tough to fit into the head, might require a little sanding. I printed the head and hands with tree supports. All other…
My youngest recently stumbled across my old Alien Vs Predator game and has been besotted by the Aliens creature and asked if he could chooes a couple of models for me to print for him for his birthday. I did a Thor hammer end cap for the…
This is version 2.0 of the dice tower I remixed. Version 1 was nice but you could not drop more than 1 die at a time and even then they might get stuck in the throat. I am using the official Alien RPG dice. I took it into Meshmixer and…
If you like my work and want to support it, Suscribe to my Patreon!! An Alien Bust I've Sculpt over a base engraved with "Area 51" Un busto alienígena que he esculpido sobre una base grabada con "Área 51" If you have any question feel…
It's a further remix which give better result when starting to print the eyes. https://youtu.be/q73BqQQ0-hQ Subscribe Now! Time-lapse print video : https://youtu.be/q73BqQQ0-hQ Subscribe to find out more support free 4K Time-lapse video:…
Featuring an otherworldly alien head merged with eight articulated tentacles, this mesmerizing desk companion offers endless manipulation possibilities. This hybrid creature combines the mysterious allure of deep space with oceanic…
You can carefully warm up the Facehugger with a lighter to pose it.
Ideal way to stop a SF book ;) Enjoy!
I proudly present to you: The Medusozoa Mushroom The production name of this one was "Cephalopod-Jellyfish-Mushroom-Plant-Thingi". And while it is probably the better description, it was a bit too long. This one can grow almost…
concept sculpture of an alien i made for the prusa contest
My good friend Rob V has done an amaizing job on his scratch buit Alien and our discussion of doing an egg and perhaps a chest burster has lead us to this point in our tinkering ; ) It stands 35cms tall about 1 & 1/2 foot Print…
Organic sculpture of an alien head/upper torso. Easy to remove supports. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Commercial use is NOT allowed for this model
More advanced Alien pot design for your alien plants and other strange green creatures. Print information: Recommended vasemode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a…
Not sure if this one is a plant, sponge or fungus - but it looks funny and prints fine without support. :-) Growing in difficult terrain like rocky deserts or alien jungles, it can be used for decorative purposes or as a unusual landmark.…
Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) This miniature, detailed design of an…
This is a remix of David Kong's amazing Alien Egg design. I have enlarged it and made a hollow space in middle so it can act as a proper pen holder. I've also had a go at fixing a couple of legs that had parts trying to print in mid air.…
Just a simple but clean Alien Keychain! =) I used Bambu XC1 Default settings with 17% ironing on top-layer. I would increase top-layer or infill depending on your colors and if you would like to hide infill.
Alien - Xenomorph - Full Figure - 25 CM
Pre-sliced on the standard X1C profile with the double sided PEI sheet. a little under 7 hours and 113g of filament which is pretty impressive!
Alien Candle Holder.The size is for one small round candle adjust to preference
Build Guide: https://props3d.pro/aliens-pulse-rifle/ Join me and fellow prop makers on Discord and join in some build projects: https://discord.gg/NGWhc6a3Gv Note that like most of my things they're iterative. I'm an eternal tinkerer and…
Layer hight: 0.15mm Infill (bottom part): Triangles, 60% density Color change recommended Original model here
A remix of the flexi skeleton with a strong neck.
This is the project for the Alien3d UFO box for February 2023 I have created code so it can work on both an Arduino Nano or an ESP32wroom. This project is remixed/inspired by…
Another plant for tabletop gaming and a nice addition to the tables vegetation, which can be used in different scenarios like desert, jungle, swamp, alien planets, ... Prints fine without support. Hope you like it. Have fun! If you print…
I don't think that this one is evil. Just imagine having a few of these illuminating your garden. Or an alley made of 7 meter versions of it. However, you may want to put some kind of reinforced concrete rhizome barrier into the ground as…
Portal from Subnautica. Designed in Fusion 360. File with supports (for resin printers) and F3D file attached. Update - 2022-01-05 Fixed wrong Ion Cube pattern extrusion Update - 2021-12-27 Made pattern depths changeble (Fusion 360 file)…
A tiny and cute Alien for your desk. It is very small (approx. 18mm). Watch out! The two color AMS version produces a lot of waste for single nozzle printers. You can reduce the amount of waste per alien by printing an entire army.…
This is a model that I created using Blender. I have based on the photo (uploaded) to create it. I have spent a lot of hours modeling it. If you like it, please give me a like and follow for more figures. If you have any question, please…
Took the piece of art “Alien Xenomorph” of Printed Obsession , and added a ramp to make it more alive. I chose to print it “one piece” with supports, and this file is included in the “Model Files”. It seems that for the model in split…
This is an lcd based shortcut device that connects to your device over Bluetooth. Since it uses Bluetooth to connect it is compatible with pc's and mobile device as well. The gadget runs from an esp32 based development board with an…
This is one of my favorite alien models. Created by Derek Kirkendall on myminifactory. https://www.myminifactory.com/users/derekkirkendall1 Very simply printed with PLA, with 0.2mm layer height. The head needs some support structures.…
Makes a great pen holder, planter or display piece. Print as is. File has designed in supports. Print in any color. Prime and paint as desired. Other great “Alien” Printables… Jonesy & the Xenomorph Mini Alien Chestburster Xenomorph…
Stitch brings his wild charm from the screen straight to your prints! This fan model captures his playful attitude and alien design. You’ll get both a monocolor version and a multicolor AMS version—printed cleanly with minimal supports,…
ALIEN AND EGG FACEHUGGER xenomorph FOR SIMPLIFIED PRINTING THE PIECES HAVE BEEN DIVIDED AND ALL YOU NEED IS SOME GLUE TO PUT EVERYTHING TOGETHER
Soda Can Mug, Can holder, Scifi Alien Style
They make me do it… yeah, not many details because it's simple 5cm round pice. yeah, you can easily print this. if you're using 0,4 nozzle you will get better results with bigger (10cm) model, but no worries it can be printed small (5cm)…
A new 3D figurine generated by AI, a nice alien bust. Do not forget to LIKE, to download and to upload your makes, thanks ! Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Aliens! Started with a rough shape from an Onshape document I made. Then made it much, much more interesting using MeshMixer. 10-31-16 Update: added a larger version (180mm tall), smoother one with a hanger slot on the back. 11-1-16…
Alien xenomorph facehugger egg fully merged. The original model came in numerous pieces and for some reason, the layers never fully matched up for me over 2 prints. It took some time to merge them in Blender including sculpting the…
Sencilla espátula con diseño agradable a la mano y funcional, en mi caso use filamento ABS para resistir mejor la temperatura pero se puede usar otros filamentos tranquilamente.
This a a model of the UD4 Cheyenne Dropship from the movie Aliens. The model comes with full load of features: Deployable forward missile hardpoints Deployable middle missile hardpoints Retractable landing legs Openable cargo bay door…
My logo/avatar “keychainified” Rounded or flat variants Printable in 1 or 2 colors (print just the head without the eyes for 1-color prints) Ckeck out the fridge magnet version too! https://www.printables.com/model/1042529
