Search results: lotion

Sort order

Counting matching models…

P
PrintablesForeverwinter

Aveeno Lotion Bottle Coupling

This coupling lets you screw two lotion bottles together to empty the last bit of an empty one into a new bottle. Designed and tested with an Aveeno bottle and printed with PLA. 2021-11-12 Update: Uploaded a newer version which is much…

Downloads
550
Likes
70
Rating
5
P
Printablesclusterfuggles

Shampoo/Hand Soap/Lotion Bottle Connector Caps

Revision Notes 8/23/2026 - I added a Small-to-Large connector cap after a few people requested it. There are three kinds of connector in this set. I have found the smaller connector fits many types of hand soap, dish soap and lotion. The…

Downloads
460
Likes
118
Rating
5
P
PrintablesLextone

Lotion Bottle Coupler re-filler thing

Salvage that last little bit of lotion! Simple bottle to bottle coupler to get your moneys worth out of that bottle of lotion. Its not threaded so it can be used on any bottle, Just scale up or down to meet your needs. There is an offset…

Downloads
175
Likes
37
Rating
5
P
PrintablesJulius3E8

Threaded cap for Aveeno lotion bottle

The girlfriend is always in a rush in the mornings and as her Aveeno brand lotion gets so low that the fluid no longer pumps out of the top, she has to resort to turning it upside down and gooking it on her hands. The problem is, as I…

Downloads
144
Likes
14
Rating
5
P
PrintablesDrHos

Lotion applicator

Here is a lotion applicator for those hard to reach areas (back, etc). Comes with a folding and a straight applicator handle and a tpu applicator pad. Could be used for scratching and/or exfoliating. I printed it at 120% because I had…

Downloads
144
Likes
7
Rating
5
P
PrintablesPrint4Fun

Yet another hand lotion (cream) squeezer V2

Yet another (hand lotion (cream)) squeezer. It's a remix of the "Yet another toothpaste squeezer (keeping it simple)". Thanks to BartPe ! :) V2 - The hole is tighter

Downloads
108
Likes
13
Rating
4
P
PrintablesTommy Meehan

Cream/Lotion Squeezer

Cream/Lotion squeezer to help get that last bit out of the tube. Designed specifically for “Eucerin Skin Calming Cream in a 14 oz. Tube” No supports necessary Original design by @GCV3D remixed to fit Lotion Tube.

Downloads
108
Likes
6
Rating
5
P
PrintablesPurchenZuPoden

TRAVEL SOAP/LOTION BOTTLE CAP

I designed a Soap/Lotion bottle cap as a replacment for my broken cap. If your lotion bottle cap has a 23mm inner diameter and a screw pitch of 3mm it should be compatible. If you want to remix or redesign the cap I have also added the…

Downloads
82
Likes
30
Rating
5
P
Printablespotato42

Neutrogena Hydro Boost Gel Lotion Bottle - coupler (or transfer adapter)

Coupler adapter that lets you connect two lotion bottles in order to combine the remnants of an empty bottle. Usage: 1) print file 2) remove pump tops from bottles 3) attach the bottles together using this coupler (emptier bottle goes on…

Downloads
79
Likes
7
Rating
0
P
Printables3DBob

Inverted Lotion Holder

Let gravity help you get the lotion at the bottom of a Cetaphil bottle! No supports needed.

Downloads
79
Likes
24
Rating
0
P
PrintablesSean O'Brien

Lotion Pump Nozzle Replacement

0.250in inside diameter with flexible keeper ridge 0.100 in, 0.300in deep pump tube engagement. Printed in PETG, 0.4mm nozzle (added 0.2mm radius to critical inside diameter fitments)

Downloads
53
Likes
1
Rating
0
P
PrintablesDevmiser

Cetaphil Moisturizing Lotion Pump Bottle Cover

Cetaphil moisturizing lotion is wonderful but its bottle is way ugly. This is a decorative cover for the bottle to make it look like a more deserving part of your decor. The cover fits the 16 oz. size bottle - it is too small for the 20…

Downloads
52
Likes
8
Rating
0
P
PrintablesMSD

Behälter für Rituals Nachfüller Body Lotion (Glasbehälter)

Behälter mit Schraubdeckel für die Rituals Body Lotion Nachfüller. Somit braucht man nicht mehr die Glasbehälter mit zu kaufen. Achtung!! Nicht für Nachfüller für die Kunststoffvariante geeignet. Die Abmessungen sind anders.

Downloads
39
Likes
3
Rating
0

Aveeno lotion bottle adapter

Aveeno lotion bottle adapter attaches two large aveeno bottles together so you can drain the contents of one into the other without making a huge mess. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No…

Downloads
37
Likes
1
Rating
0
P
PrintablesAthenaRoberts

Lotion transfer tube

Have you ever get tired of not being able to use the lotion or gel at the bottom of the bottle because the tube isn't long enough? Tired of making a mess and spending a lot of time to move the lotion from one bottle to another? This…

Downloads
35
Likes
9
Rating
0
P
PrintablesViolet Hadley

Minimalistic toothpaste, lotion, or other tube squeezer

This creation was inspired by trastle's similar Thing . I wanted a parametric version, so I remade it in OpenSCAD. The 40mm version perfectly fits a Bath and Body Works hand lotion, and the 75mm version fits a Bath and Body Works body…

Downloads
35
Likes
1
Rating
5
P
Printablesbigd50d50

Bottle Emptying Transfer dish for Soap, Lotion, Shampoo, Conditioner

Transfer dish for Soap, Lotion, Shampoo, Conditioner to empty bottles in bath room

Downloads
34
Likes
6
Rating
0
P
Printablesyelrow525

CareOne BodyLotion Bottle Emptier

CareOne BodyLotion Bottle Emptier. Empties one bottle into another. 23.5 mm outer diameter of bottle top. No support needed.

Downloads
30
Likes
2
Rating
0
P
PrintablesFG's

Bracelet for All - Soap, Hand Sanitizer and Lotion Capsules

Do you get stuck outside or inside thinking that your hands or the surface that you touched are dirty! Here is a portable solution!!! You can carry a small portion of Soap, Hand Sanitizer, and Lotion ALL IN ONE! Handy-dandy bracelet with…

Downloads
29
Likes
2
Rating
0
P
Printableskinghat

lotion adapter and stand

a lotion bottle adapter and base. the large lotion bottles i get have a pump and you can never easily get the last of it out of the bottle. which happens to really add up over time. idea is to pull the pump out and attach the adapter.…

Downloads
29
Likes
2
Rating
0
P
PrintablesKarlBunker

Hand Lotion Bottle Empty-er-izer

Are you tired of throwing away endless ounces of hand lotion because the pump in pump-cap bottles never empty the bottle, and often just stop working? Of course you are! Here's the solution. A cap that replaces the pump-cap and allows you…

Downloads
25
Likes
3
Rating
0
P
PrintablesGrace Serenity

Uppdatera Lotion Organizer

A frame to help store Bath & Body Works lotion bottles in the IKEA Uppdatera storage bin. It wedges in about halfway into the bin and separates your lotion bottles while still being able to see each bottle. Can store up to 9 bottled per…

Downloads
19
Likes
5
Rating
0
P
Printablespatrickpleez1

Shampoo, Conditioner, Bodywash, Lotions, Soaps, ETC. Pump-Stop

Shampoo, Conditioner, Bodywash, Lotions, Soaps, ETC. Pump-Stop. Make taller for longer necks.

Downloads
17
Likes
4
Rating
0
P
Printablesmilleniumfrog

Nivea Body Lotion 400ml cap extension

Add the cap to easly position the bottle upside down for easy getting last drops of body lotion.

Downloads
15
Likes
0
Rating
0
P
PrintablesMuhahahihilan

Stand for Neutrogena Body Lotion Bottles

The small variant fits a 250 ml “Intense Repair CICA Bodybalsam” bottle (~ 66.7 x 35.5 mm). The large variant fits a 400 ml “Deep Moisture Bodylotion Sensitive” bottle (~ 76.7 x 44 mm). FreeCAD files are included for customization. Print…

Downloads
14
Likes
0
Rating
5
P
PrintablesMarcWinNJ

Hand Lotion or Toothpaste squeezer - center grip

Modified the design to round it and add tabs in the center to make it easier to use

Downloads
13
Likes
4
Rating
0
P
Printablesfroz

Cap for R&R Lotion ESD Safe Bottle

My mom stores isopropyl alcohol in these bottles so I made a cap for them. This is a cap for the "ESD Water Bottles" by R&R Lotion.

Downloads
8
Likes
0
Rating
0
P
PrintablesBordello_Labs

Outdoor Bottle Holder for OFF! 3.8 oz Repellent & Lotion Containers

Keep your bug spray or sunscreen exactly where you need it with this simple, durable wall-mount holder . Designed for OFF! 3.8 oz repellent and lotion bottles (and other containers of similar size and shape), this holder mounts securely…

Downloads
4
Likes
0
Rating
0
P
PrintablesSirMcMike
Downloads
3
Likes
3
Rating
0
P
PrintablesIsaac Yan

Modular Lotion Holder

Modular lotion holder

Downloads
2
Likes
0
Rating
0
P
PrintablesMakerPaul

Suntan lotion upside down stand

The Boots Soltan suntan lotion bottle is a really frustrating design. It's impossible to balance the bottle upside down to get the last of the lotion out. At least it was... This little beauty will solve all your suntan lotion balancing…

Downloads
0
Likes
0
Rating
0

Palmers Lotion Cap

This conversion lid provides easy access to thick lotion that remains trapped in the bottle after the pump stops working. To install it, carefully cut the upper portion of the lotion bottle off, leaving a clean and even edge. The bottom…

Downloads
0
Likes
0
Rating
0
P
Printables

Modular Lotion Holder

Modular lotion holder