Kryty na plotové sloupky
Žáci si zjistí potřebné rozměry plotových sloupků ohraničující jednotlivé součásti areálu školy, na jejich základě vytvoří 3D model a vytisknou kónické kryty.
- Downloads
- 10
- Likes
- 2
- Rating
- 0
141 models
Žáci si zjistí potřebné rozměry plotových sloupků ohraničující jednotlivé součásti areálu školy, na jejich základě vytvoří 3D model a vytisknou kónické kryty.
Lotus flower earring cutter for polymer clay, cookies or crafts-Cortador en forma de arete flor de loto para arcilla polimerica, galletas o manualidades
Simple phone holder that drapes over the front handlebar on a Peloton bike. I also made a version that holds iPads/tablets at a slightly shallower angle: https://www.printables.com/model/611611-peloton-ipad-holder
Peloton shoe hanger that fits onto the weight rack of the bike. Print two to hold two pairs of shoes. Because some people have asked, this model is not meant to snap onto the metal frame of the weight holder, but rather sit slightly into…
Altura de Capa 0.2mm Temperatura de PLA 210°C Temperatura Cama Caliente 60°C Relleno 20% Adherencia a la cama de impresión Borde Soportes No
This is more of a full redesign rather than a remix, but I wanted to give proper credit to DougPrints for their design. Changes from original design: Smaller diameter bracket to accommodate standard Peloton handlebar (33 mm) No need for…
This is a bracket and hooks to hang two pairs of shoes off the back of a Peloton exercise bike (model: Bike, not sure if it will fit the Bike+) Full supports helpful for printing. There are three parts: one is a frame that attaches to the…
This is a lightweight but stiff tablet stand for the Peloton bike. Can be mounted on the v1 bars, v2 bars, or over the screen. Wave pattern adds a nice look while reducing filament usage. Requires support for one structure on the back.…
Large bottle holder for the peloton bike. Made for bottles with a diameter up to 96mm. The attachment point to the bicycle is not the most solid part of the bike (plastic). Therefore don't use heavy bottles and no guarantee if the…
If you want to hold paintbrushes or colored pencils, I recommend the Cubistand from sdmc : http://www.thingiverse.com/thing:1294085 I use it for my brushes and it was a great inspiration for me. Here is 3 different marker stands, for…
Installs on center bar of peloton bike, see pics. No screws needed, after pushing onto the center bar, it clamps in place using a tapered wedge hidden inside the part called "lock" Holds various phone sizes with a clicky slider that grabs…
Tray to hold your phone or other stuff on the Bike+. Has 2 orientation options and uses insets to hold it in place I used these insets on the design, because I wanted to experiment with making it moveable. https://amzn.to/3w1SqeJ
The rest was designed to be a single print. No other parts are necessary. I have been using mine (Prusament PLA) on my Peloton for most of a year now.
Wife wanted a towel hook for the Peloton bike, and I wanted to print something that didn't require any additional modifications to the print. Hence, this clip-on hook sized for the Peloton handlebars. If you want the hook to maintain a…
Remixed with more rounded corners and no hex pattern. Should be much faster to print. Re-used same angled bar connectors and overall depth, width, and stop height. More fillets and blending. Printed in Prusament Galaxy Black PLA .
(updated Jan 2023) sized Z-thickness down to 10mm, added nail hanger hole into object (by subtracting “Keyhole Hanger - Negative Volume” ( https://www.printables.com/model/314932-keyhole-hanger-negative-volume )). My intent is to use the…
I tweaked my design so it will also work with iPads or other tablets, as well as phones. The angle is also slightly shallower as a consequence. Print it on its side, warping may occur but it shouldn't affect the function. Printing with a…
My FIL complained to me that his peloton had wimpy little holders for itty bitty water bottles, which obviously wasn't suitable for his big chungus water bottle for his 12 hour bike rides. So I modeled this up so he can stay hydrated…
A beautiful minimalist painting of a Lotus flower on the wall or with a stand on the table. Size 200 x 175 mm You can find the small print stand for the table on my profile ↓…
Diseño elegante y fácil de imprimir en 3D. ¡Añade un toque único a tus proyectos con este sello único!
Print two arms which then hang from the top of the screen. Not sure if it would fit the Tread+, that has a different screen so it may not. Arms are not rigidly connected but I found with the weight of iPad/phone holding them they don't…
Mold and Cutter in the shape of a Buddha with lotus for cookies or polymer clay - Molde y Cortador en forma de buda con loto para galletas o arcilla polimerica You can make a scale according to your need from your preferred laminator
This shelf uses the screw that is already in place on the bike. The shelf fits my iPhone XR with a case on it with room to spare and should fit most phones.
Do you own a Peloton Bike or Treadmill and also own the Peloton weights? I finally managed to come up with a really slick storage solution for my Peloton weights and thought I would share. Issue is, the Peloton weights have a unique…
Designed to be more narrow than the original model. This fits newer Pelotons that have more narrow handlebars. Uses the frame of the handlebars for support. I have been riding with mine for more than a year (Prusament PLA) and it works…
Very simple thing my wife asked for so she could hold her phone in front of the Peloton screen so she could occasionally do Zoom rides with others. Print on its side. Category: Organization
Admittedly, since this is one of my first times using any kind of CAD software, I think this could be improved. One main issue is that because of the added ball joint, the tray would require tons of support when printed in any…
This intricately designed LED tealight holder was created with lovers of tranquility and aesthetics in mind. The lotus flower shape symbolizes purity, beauty, and rebirth, making it an ideal addition for meditation, relaxation, or simply…
Wife got a Peloton bike used and it did not come with the wedge tool to calibrate the resistance. Tutorials online have you use a stick with a line to set the right height, so we followed those and then I created a model for it. The model…
Not pretty but it works well and allows me to use PS5 remote play while riding the Peloton. Also good for watching movies and Youtube (basically anything on an iPad). Tested it on the most recent iPad air, iPad without a case, and three…
I search and could not find a replacement cap for my FloTool 58qt Oil drain pan (42008). I made this real fast The cap is design to print fast without supports. I used pla however petg would be better. the gasket is printed using TPU. I…
Introduction You can print these pedals and attach them on to your Peloton so that it can be used with or without specialized cycling shoes. Printing Instructions I printed these in PLA with a 0.4mm layer height, 3 walls, 25% infill. I…
Base is printed in ColorFabb transparent violett and then red Prusament and on the top some black. Maybe you want to have a look at the other models of this series: https://www.printables.com/search/models?q=%40+zSchon+tag%3Aradicalleft
CZ: Držák kamery na plotový sloupek. Designováno na průměr sloupku 50mm, ale bude pasovat i na jiné. Držák upevněte na sloupek v orientaci kamerou dolů a držák upevněte dvěmi nerezovými stahovacími pásky (typ W4 - celonerez, W2 - nerezový…
Securely mount your iPad Air above your Peloton Bike (original non-swivel) monitor. Mounts to top vesa bolts of the monitor. Requires (x2) M4 16mm socket head (x2) Silicone bumpers 10x3mm ( amazon link ) Note: Installation requires the…
Turn the record player to maximum speed and watch the carousel spin. Go back in spirit to your youth listening to the Sex Pistols or the brass band.. No supports needed. * Roztočte gramofon na maximální otáčky a sledujte jak se kolotoč…
První statická verze kolotoče, zatím bez převodů na rozpohybování koňů a kolotoče. Finální verze bude umět otáčet celým kolotočem a pohybovat koni nahoru a dolů. Nejsou nutné podpory, pouze pro střechu jsou nutné límce! The first static…
This small out of the way phone shelf attaches directly to the Peloton using the existing screw on the left side of the handle bar neck. Just unscrew, place the bracket on the neck, and put the screw back. Hardware required: (2) 3mm hex…
May not fit smaller printers. Print Settings: 0.28mm layer height 10% infill supports on raft/skirt off
Needed the disk calibration tool and Peloton doesnt seem to sell them. Only other one I could find required supports. This one does not. I thought it'd be fun to do a multi-color variant of the bottom disk to make it easier to see the…
A basic rack for the Molotow One4All Refill acrylic colors. Use the file RefillRack_legs as a base. If you need more racks, use the file RefillRack and glue it on the top of the other one (use double sided tape). You can use the…
Lost the plug to my FloTool 16 Quart Drain Container Model 42003MI. I printed this one from PLA. I'm sure PETG, ABS or ASA would be better for long term usage.
Wanted a Nalgene holder for my Peloton, but all existing models I could find were for the Bike, not Bike+, so I remixed a holder design for Bike to adapt for the Bike+. The design slips over the upright tube frame and is pressure fit,…
This is a bracket to hold a Bose SoundLink Flex Bluetooth speaker on a Peloton bike. I wanted to have an easy method that holds the speaker securely while on the bike, while also being able to take the speaker with me. The rubberized…
I made myself a clip-on stand for any device on the peloton-Bike, so you can work-from-home while working out :)
I couldn't find any phone holder I liked for the Peloton Bike+. I printed other models and wasn't thrilled. Too loose, nothing keeping the phone from getting knocked off the sides, Wasn't securely mounted, got in the way when rotating the…
Inspired by nature and light! This Lotos Bloom Tealight Holder is a 3D project that will bring harmony to your surroundings. Its versatile design fits many interior styles, and the option to use an LED candle makes it safe and practical.…
Small shelf for Peloton Guide and remote.
Tablet stand for a Peloton bike. Designed to hold tablets and phones of varies sizes in different orientation. All parts can be printed without supports. Print one each of the short, medium, and long bars and the main tablet holder. I…
Update: I've added a new alternate tray. The alternate tray has a solid bottom, sports the Peloton logo in the center, and features ribs on the inside. These ribs allow a phone to be leaned against the Bike+ screen. This is useful when…
This is a Molotov Cocktail Grenade that I made from a Cayman Jack Margarita Drink Bottle. I had no real reason to make this except every time I drink these little bottles of margaritas the bottles remind me of grenades so..... I turned it…
MANETA PILOTO MK1 Drive Unit RAYMARINE Autohelm 4000 / ST4000 REAJUSTADA MEDIDA DEL AGUJERO. SI QUEDA UN POCO GRANDE PONER UN POCO DE PEGAMENTO DENSO PARA RELLENAR EL HUECO, NO INSTANTÁNEO, EN EL AGUJERO. LUEGO PONER UN PAPEL ANTES DE…
Modelo a escala de un piloto moderno de jet ideal para impresión en resina, se puede imprimir a cualquier escala con altos detalles.
A mag safe wireless charger mount for Peloton Bike+. Only verified compatible with the Qi charger listed in the BOM (annoyingly they are all different sizes, but the one in the BOM is about $15USD, and seems to work well). I tried at…
Some reports of Peloton knobs splitting. Peloton resistance knobs appear to be melted/molded onto the rod at manufacturing. This is a non-replicable part according to Peloton. Print instructions Summary This is an original model from 2nd…
So you can put your phone higher up. You can print it on it's side with no support. I cut out some holes to reduce material use.
Půlkulatý držák zasunout do podstavce (měl by držet bez lepení). Jako čepy je použit svářecí drát průměr 2mm. Tam kde má být pevný stačí zasunout. Kde chceme točit je nutno dírku zvětšit vrtákem 2,2mm.
I updated file, as there were errors in my original one.
Just a storage solution for my Molotow Acrylic Pens that I like to paint my PETG Prints with. The box can be used with or without the base in horizontal or upright orientation (see pictures). 20 Molotow One4All pens (diameter 13mm) fit in…
This is a storage tray for up top 60 Molotov 2mm markers. Printed in ABS with a 0.6 mm nozzle.
Replace Peloton spin bike's [1] default speakers with OontZ Angle 3 ULTRA (Cambridge SoundWorks) [2] by mounting it right under the screen and connecting directly by stereo cable to eliminate bluetooth delays. Better, louder sound with…
Video: https://imgur.com/gallery/q4sEIOc Bulb Socket: https://www.amazon.com/dp/B00WZUAO6I?psc=1&ref=ppx_yo2_dt_b_product_details Flame Bulbs: https://www.amazon.com/dp/B081H158NM?psc=1&ref=ppx_yo2_dt_b_product_details Wrapped bulb in wax…
Diseño e inspiración Este modelo se inspira en personajes espaciales de ficción, destacándose por su casco distintivo y apariencia futurista. Uso Ideal para coleccionistas y entusiastas de temas espaciales. Puede fungir como adorno o…
I used zip ties to secure the holder to the bike.
PLEASE NOTE: If you downloaded the model before 9 PM Eastern Time on July 26th (US) you have an older version of the model. Please download PirilloTotOfficial to get the official model! A fusion of Chris Pirillo's Emperor Pirillotine…
Remixed Chris ' Peloton Shoe Hanger to make it about 2.5" longer. The original was contacting the weight holders because I keep my seat towards the back limit of travel. This one clears the weight holders with the seat nearly against the…
I use a Peloton bike multiple times a day and hated it doesn't have a spot to hold your phone so I fired up Fusion 360 and designed a simple holder for my Pixel 8 Pro. The clip just attaches to the handlebars and all you need is a 3mm x…
Model of the Peloton. Both a single-piece and multiple-piece (for assembly) files provided. Print Settings Printer Brand: Anycubic Printer: Vyper **Rafts:** Doesn't Matter Supports: Yes **Resolution:** 0.12 but 0.06 on smaller parts…
Triassic poposaurid pseudosuchian from China
Remix to add a firetv remote holder. Remote specifically fits the 4k firestick remote with sound controls.
⚠ Warning: When removing supports after printing, be extremely gentle — the whiskers of the Plotosus lineatus can break easily. Use tools, not your fingers 🛠 Plotosus lineatus , the striped eel catfish, is a small Indo-Pacific species…
I have a ceiling mounted TV in my basement gym and placing the Peloton Guide on top was not ideal. Not sure if the holes for the stand of my Samsung is a standard size, I set M5 mounting holes 47.5mm and 48.5 mm apart. Certainly…
Keytag for Lockout/Tagout Keys with Label Space This keytag is designed for Lockout/Tagout keys and includes a space for a label with contact information. It accommodates labels with a width of 36mm and a maximum length of 72mm. There is…
I use a Peloton bike multiple times a day and hated it doesn't have a spot to hold your phone so I fired up Fusion 360 and designed a simple holder for my Pixel 6 Pro. The clip just attaches to the handlebars and all you need is a 3mm x…
Větší kolotoč místo původního 14 cm. Obsahuje dvě verze: 16 a 18 cm. Větší je lepší pro velkého křečka, ale nevejde se do každé klece. Ale i 16cm je mnohem lepší, než původní 14cm. Neobsahuje díl pro uchycení na klec. (použili jsme…
Earring model of a burning bottle (molotov cocktail) with basins for the flame and bottle epoxy fillings. Maybe you want to have a look at the other models of this series:…
Carousel for a small toys or small figures. I inspired on the page https://www.printables.com/cs/model/335540-ferris-wheel/files , but all model is my work. The composite model is about 30 cm hight, but it is possible to print it on the…
This is a towel hook made for the Peloton Bike+, an indoor exercise bike. The model hangs on the frame between the handlebars and the screen, leaving a convenient location to store a towel. This way, the towel is always available when you…
Print this two part phone holder to help hold your phone while riding you peloton bike. The two pieces fit together and hang over the screen without obstructing your view. Use a bumper or stop to keep it from falling off of the side.…
If you own a Peloton bike and you would like to use a virtual biking app like Zwift or MyWhoosh, then you might want to use a tablet with it. This holder is simple to print and has enough stability to prevent the tablet from falling. I…
My first personal model, made with blender
Una flor de Loto simple si es muy apoyada y le das un me gusta y la apoyas prometo darle la versión lampara
Tento 3D tištěný organizér s motivem lotosového květu zachycuje eleganci lotosových lístků a nabízí estetické řešení pro organizaci drobných předmětů. ## Použití Organizér je ideální pro aranžování malých kancelářských potřeb, šperků nebo…
I used this template to cut the lock. https://www.thingiverse.com/thing:5394369
good model that i found from appelm. follow him. rn. use %70 infill
I wanted to get my power adapter for the Peloton Bike+ off the floor to reduce tripping hazards. I used this mound and some 3M command strips to attach it to a nearby column.
Simple x6 pen holder for Molotow One4All series. It fits 16mm pens, you can scale it up to match your needs. Enjoy. Print Settings Printer: prusa i3, CoreXY Rafts: No Supports: No Resolution: Any Infill: Any, does not matter Notes:…
Modelo 3D de una hoja de loto con diseño realista y detallado. Compatible con impresoras de resina fotopolimérica (SLA/DLP/LCD), garantiza una superficie precisa y limpia, ideal para proyectos decorativos, artísticos, joyería o elementos…
I had an aftermarket phone tray for my Peloton but couldn't lay my phone face up on the surface without the popsocket making it scoot around. Made this the perfect width so I can drop it in and it stays put. Could also just be used on any…
We‘d often misplace the hex wrench used to tighten the bolts on the bottom of the Peloton bike shoes, now it has a home attached to the seatpost of the Peloton. No supports needed. Print with PLA or PETG as it's not weight bearing. Flat…
Print upright with supports. Add modifier blocks in your slicer to increase perimeters to (5) around bolt mount areas. Supports everywhere. GCODE file prints in PETG with these extra perimeters around these bolt areas and organic…
With filament changes at 4.2 and 5.2 you can have a really nice looking chart. I recommend starting with black, changing to white, then finally red. It fits on the echelon bike and is handy when converting resistances.
2S42 Lotos is a scale model STL of a real military armored vehicle tank style platform for display and diorama use. Ideal for wargame scenery, scale vehicle collections, model building, and realistic tabletop or shelf displays where you…
Česká verze Dekorativní 3D tištěný kolotoč vhodný jako dárek, ozdoba nebo kreativní projekt. Model nabízí hravý vzhled a dobře vynikne na stole či polici. English A decorative 3D-printed carousel for a gift, display piece or creative…
MALOTOUGH has created an interesting system for attaching tools to a belt. The problem is that only the belt clip is sold, while the tool-attaching part is included with the bag and is not sold separately. I present several options:…
I got tired of the weak built in speakers on my Peloton bike and don't always feel like using ear buds so I decided to create a mount for a UEBoom I had sitting around. The mount snaps together without any screws and holds the speaker to…
The square dumbbells didn't really fit on the bike+ and were very close to just falling off. I made a couple clips that would better hold the new dumbbells. Print with supports