Rosslyn Chapel Master and Apprentice Pillar.
Rosslyn Chapel Master and Apprentice Pillar.
Print approx. €6.81–€8.33 excl. taxPreliminary estimate for one variant
- Downloads
- 734
- Likes
- 113
- Rating
- 5
Counting matching models…
Rosslyn Chapel Master and Apprentice Pillar.
Print approx. €6.81–€8.33 excl. taxPreliminary estimate for one variant
Caitlyn from League of Legends. These clean up easy without the need for displacement. Actually, adding it made it worse.
Print approx. €7.16–€8.75 excl. taxPreliminary estimate for one variant
Designed for the Victron Lynx Distributor M8 (not sure if it fits in the M10 version). Provides two slots in the back to allow smaller gauge wire to be run out the back end without opening up the whole back end of the device. Includes…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
A quick print, because the world is weird, and I miss David Lynch. We like these colorful ball chains for keychains - https://amzn.to/4imYtiX I like to print at .2 layer height, with the printer slowed down a lot for the text layer. Clean…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant
Jocelyn is 242 mm long x 66 mm high and 20 mm thick . It is made with SketchUp 2015 using the Arial bold font. I printed it in bright pink PLA.
Print approx. €3.63–€4.44 excl. taxPreliminary estimate for one variant
LYNX DIY Blaster - EU Edition HINWEIS! Bitte druckt diesen Blaster recht Farbenfroh, so dass er sich stark von echten Waffen unterscheidet. Nachdem ich bereits vor ein paar Wochen meine EU Version des CALIBURN 4 Blasters veröffentlicht…
Add a tropical vibe to your plants! This Tiki-inspired planter features deep, sharp wood-carving textures that look incredible with a stone or wood filament finish. 💙 Enjoying the Freebies? I love bringing these concepts to life and…
Summary Ideal Foam Blasters (IFB) is the only entity granted permission to produce the Slynx hardware and fully assembled blaster. Full disclosure, I do not earn anything from the sales. They are my appointed custodian of the Slynx design…
An enclosure to house a Victron 275A Battery Switch and Victron 500A Smart shunt, to be coupled with other modules of the lynx distributor, made from the original Victron Lynx Shunt VE.Can enclosure model. I made this model for my own…
Small simple holder for Sculpfun S30 focus cylinder holder, that attaches to rail.
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
This is the 2.1.0 File set for the Lynx, Lonx and Minx. Enjoy! STLs import in their correct print orientation. No supports. 4-5 wall, 15-20% infill. (more details to follow)
post a pic when your done! Any questions dm deathtree on disc
The charm floating around the Green Dolphin Street Prison, passed onto Jolyne when she is in trouble. If you are lucky, you might develop some bizarre powers. PART 6 Let's Go! Super excited to have this part animated! LocketTop x 1…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Inspired on Victron Lynx - Rpi + 5" Touchscreen enclosure by RobrechtDR. But I had a lot of problems importing the STL into Sketchup, so I started again with the original Victron files.
3 version, BRP, Skidoo et Lynx support: oui infill: 20% Matière: PETG ou autre
Caitlyn From League of Legends Figure (w/ Stand!) Extracted from the game
UPDATE: 10.02.2025 -Added full assembly in step format. 04.10.2026 -Updated mag release linkage to correct version. Nekomata: A family of remixes of the Lynx 2.1.0 platform that incorporates some original design along with a collection of…
Reproduction of the Apprentice Pillar inside Rosslyn Chapel. Reduced polygon count so you can import it to Tinkercad. Category: Scans & Replicas
Since my original flat triggers for the Orion Blasters Lynx were so popular, I decided to make a couple more for people to enjoy. The Lynx_Speed_Trigger has a similar feel and pull to the stock trigger, if you prefer that kind of trigger…
So the LYNX BUS power supply module without LYNX Shunt or LYNX BMS is complete (let's call it LYNX PowerIN for example 😃). Of course, the information about a blown fuse is not transferred to Cerbo, only the saltpeters in those LYNX…
Meet Remnant, the Lynx 2.1 remix. Features from front to back: New Adjustable SCAR muzzle Locks right into the body pin, holds a 40cm barrel in place without the use of the usual barrel thumbscrews, vented, nestles inside the pump without…
A Lynel. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
This is a remix of the other top from RobrechtDR. It uses the same bottom which houses a Victron Smart Shunt and Battery cutoff switch. The main difference is that I've flattened the top to make it easier to print.
It fits with a small keyring although if yours is a bit more chunky you have to scale it up a bit.
Just print it and cover your unused Ports on your bus bar. This is especially useful for busbars mounted upside down
These models were designed by Studio 285, which Caitlin wore in her version of Arcane. It includes 2 design options: a larger one for the back, and a smaller one for the shoes. A set of STL files for printing Kaitlyn's cosplay crafts from…
BOM: 9pcs M3 heat inserts (length 4-6mm) 6pcs M3 button/pan head screws (length 6-10mm) for mounting the side plates 2pcs M3 (any kind of type) (length 8-12mm) for mounting front 1psc M3 socket head cap screw length 30mm for locking the…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
A new 3D figurine generated by AI, a Lynx Bust. I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the camera…
This is a modified shroud and pump for the Orion Blaster Lynx, Minx, and Lonx 2.1 beta to add a ball detent. This locks the priming grip in the foward position so it doesn't move around easily. Uses a 6x7mm ball detent, the same kind that…
This model is no longer for sale. Disney had one similar but discontinued it. My wife had to have it, so I designed this in Fusion 360, then printed it on my 3D printer and some of the larger parts were cut from ¼ basswood using my laser…
An enclosure to house your Raspberry pi 3 or 4 running Venus OS and a DSI 5" touchscreen, to be mounted next to other Lynx modules, made from the original Victron Lynx distributor enclosure model. I made this model for my own using and…
Notes Fits my display stand for the Sega Game Gear in height and vertical angle.
This is an extended draw (125mm) remix of the 2.1 Lynx Blaster that uses a *mostly* standard hardware kit and is designed to pair with my Toolless Tensioner System parts and use Deathtree's PKI Lynx Remix parts to fill in the remaining…
Visual and internal overhaul of the LYNX and MINX 2.1 by Orion Blasters, fit with personal greebling, nutty internals, remnant shroud geometry, etc Requires 2x m3x8 for muzzle and 2 m3x13 dowel pins for thumb and index finger release.…
This is my try of making a DIY Victron MP2 compatible DC-distribution. It's based of a 40x8mm copper rail which can carry according to DIN EN 61439 1300A. The whole design is inspired by the Victron Lynx but with the requirement of…
Mod's I've adapted to the unreleased Lynx 2.1 files
This is designed to be printed without supports. Can be printed in any filament you like but I recommend PETG or ABS in preference to PLA as a bit of flexibility is nice to make it more durable. To fix this to the healight us four small…
Designed for Bambu Lab AMS (4-color setup) Grey → Buildings Black → Roads Green → Parks Blue → Water No supports needed , flat base for easy adhesion Perfect for wall art, desk décor, or gifts Fits the Bambu Lab A1 / P1 build plate ⚙…
PKI RR LYNX, final edition. skeletonized versions and default RR step files included USE THE PKI SKELETONIZED INTERNALS ( print head in tpu )!!! lighter weight internals+pins to hold catch assembly together to reduce flexing PUMP IS VERY…
A surreal tribute to the master of mystery and dreams. This stylized bust captures David Lynch’s iconic hair, sharp features, and enigmatic aura—perfect for fans of Twin Peaks, abstract cinema, and visionary storytelling.
Diese Figur ist ca im Massstab 1:24 und ideal für Resin Druck
Cosmetic Variant of 2.1 Lynx. Also included are some modified internal parts for use with a bronze flanged bushing, which can be found here https://www.amazon.com/Hillman-58106-Flange-Bearing-Bronze/dp/B00MNDPXBS You'll need to use all…
They aren't the most detailed but they were just ones I designed in an afternoon for my girlfriend and i to cosplay at comic con
2 parts for a FinishLynx RadioLynx module. 2025-03-19: Added the Fusion 3d file as well as STEP and OBJ formats for people who want to tinker. Receiver No printer? No problem! Buy one printed in PETG for $20 . This is the easier one to…
Lynx cheek rest 'Cheek grater' remix of the 10mm cheek rest by EnderSavesTheDay https://www.thingiverse.com/thing:4629645 Print standing up on the 'back' side with a brim should print fine that way Category: Toy & Game Accessories
This is a fully 3D printable, working dummy model of the GM6 LYNX. Requires a knife and glue for assembly. There is no BOM of materials for screws, springs, etc. so all movements are manual. Suitable for cosplay/decorative purposes, rough…
I wanted to use the excellent Pyrangle foregrip (by Captain Slug) for my Lynx but the standard version was a little loose so I remixed it to grip with no wobble. Now my weedy arms are able to prime my Lynx more easily. Also tweaked some…
Hey there, take a look at this Scout woggle inspired by the head of a lynx or wildcat. I've given this design a little upgrade to make it a perfect Scout woggle, and I've made all the necessary adjustments so you won't need any supports.…
Thumb release for ORION Lynx blasters. Parts are set up for right handed users but can be mirrored for left hand use. The mag release lever requires an additional 3/32" diameter trigger pin that can be cut to length; 7/16" [11mm]. Some…
Lynx Cover wicht Grommet: covers the red an blue ruber cover of the lynx Lynx Cover BusBar: covers the bare busbars of the lynx
A lynx paw track pendant for a necklace. It is designed to print without supports. Updated May 2023 - thickened eyelet and now there is a hires and lores version. Please "Like" this file, if you collect or download it. Category: Jewelry…
The little spacer used to space uit Lynx modules, modified to fit over 3D printed modules. 2 needed per module. Look at my other 3D models for other Victron Mods.
Compatibility: This does not work with the current 2.0 Lynx file set. This only works with the 2.1 file set posted in the Orion Blasters Discord server. Why is this a thing? I had issues with the mag release included in the 2.1 file set…
This is a cover for the positive and negative busbar of the Victron Energy Lynx Power In 1000. The cover simply clips on top of the busbar, a small stretcher prevents it from sliding off when mounted in vertical direction. Preferably…
I was inspired to create a miniature bakery full of cats and bread: This is a work in progress project created to get better at clay sculpting, all progress I do will be shared here… INSTRUCTIONS: 01.) Print the cute little bakers :3 with…
Another remix of the excellent Rugged Box this time for storing up to 20 loose HuCard / TurboChip games in their vinyl sleeves. I have included 2 lids so you can print PC Engine style or TurboGrafx 16 style boxes in multi-color glory. You…
To keep the end of the ratcheting strap close to the belt of a DAA lynx belt buckle. Probably one of the most niche things I ever uploaded, but its simply a keeper to keep the end of the ratcheting strap on a DAA lynxt buckle close to the…
Knurled versions of the Orion Lynx's grip. Includes versions with and without support for the Foamgasm Lynx Thumb Mag Release. Also includes versions with a lynx logo on the butt of the grip. The knurling has been fully redone with clean…
Caitlyn's Necklace from the Netflix show Arcane.
Enjoy! Please make a donation to a charity of your choice if you find these files useful.
Club (Patu Onewa) This type of short-handled club ( patu ) features a flat elongated blade with sharp striking edge. The term patu means to strike, hit or subdue in Maori – in this case the blow administered was a sharp, horizontal thrust…
I found similar signs and models on the web, but I wasn't happy with them for various reasons. I created this model from scratch in Fusion so I could print it with four filament colors. The sign is printed with three filament color…
Was inspire and built “The Gliding P” by Shane Wheat and loved it so much I modeled the geometry from it. The pickguard related things are the same as the original as well. Made a Jaguar like body instead. The Knobs are a modified version…
This is a remixed version of M. Bergman's very nice Panzer II Luchs tank model. In order to more easily print it on my Mk4, I split the model into several pieces, and arranged them in a way that I thought appropriate. I also re-scaled it…
16" wide replica of the neon sign from the TRON movie using 2.6mm ElectroLuminescent Wire to simulate neon Printed in Black PETG This print is two main halves, the left and right side, which make up the sign. Plus a back bracket and 4…
Lynyrd Skynyrd 80's Band Sign As with most just resize to what you want and color if you have a color printer. I tried to keep the logo’s as original looking as I could, I made these for my wall not to sell & figured someone else might…
Requires 4mm PTFE tubing, same stuff that your printer uses. ts kinda goated oh yeah also print catch3 out of TPU cuz it's just better
Just a simple Atari Lynx Display stand. Works fine with PLA filament and don't forget to add structural support.
3/5/25 Added step file Smoothened out some odd leftover geometry Same print orientation as the default grip.
The Brooklyn Bridge Bookend is perfect for any civil engineer or bridge enthusiast looking for something to spruce up their shelves! This model comes in 3 parts and various quantities: Bridge Anchorage x 1 Bridge Tower x 1 Bridge Cables x…
Remixed Parts Slynx Shroud : cosmetic change Stock : updated to 2.1 geometry, uses the new tensioning system and captive magazine release (I'm using gavatron77's design ) ESTD Magwell : added SLYNX text, updated geometry for 2.1 hardware…
“More is more” These parts include a toolless tensioner knob for the main body bar; options for various barrel lengths with the different muzzles; and aesthetic parts including a shroud, handguard, and thumbhole stock. Extra hardware vs a…
Post a make if you print! I would love to see it. Slynx shroud and pump part designs modified to work with the original Lynx blaster hardware. Replaces all printed parts in front of the receiver. IMPORTANT - CHOOSE THE CORRECT PUMP PART:…
Lynx Figure The ghost cat of the northern woods, shrunk down to desk size. 🐾❄ Real lynx are almost impossible to spot - all silence, snow and those famous black ear tufts. This one is a lot easier to find. It traded the stealth for a…
Updated 5/12/24 - Embiggened holes to clear stock attachment screws in the buttpads. I noticed the screws heads seemed larger in the most recent lynx kit I got. Also added 1.25 inch pad option. Updated 5/23/24 - Added an additional…
Cerbo GX Enclosure Top v1.4 Cerbo GX Bottom v1.4 An edited version of the Victron Lynx case for Cerbo GX. I specifically made this to accomodate a USB device, HDMi Cable and RJ45 connector. This version (198mm x 160mm) is printable on a…
Extended lynx ergo stock 1 and 2 inch variety. Made by request for somebody. Needs a long screwdriver for the installation. Remix of https://github.com/ahalekelly/lynx-blaster
This is a Toolless Tensioner System for the LYNX (2.1) and HIJINX . The key parts should be compatible with other LYNX variants/derivatives (ex. Minx, Lonx) but this is not guaranteed. The design is remixed from Orion Blasters' Lynx 2.1…
A great Wall Art of a Lynx. Do not forget to upload your makes, thanks ! Based on an orignal picture made with Hotpot
Victron Lynx is a nice & tidy system, but I feel that it is money-oriented Why? - Lynx PowerIn can be easily transformed into a Lynx Distributor (with no LEDs) - Lynx Distributor takes power from the Lynx Shunt. - Lynx Distributor has…
I remixed the “ex” bearing centering and rifling device to integrate with the Lynx by Orion Blasters. It slots over a 45cm barrel and is secured with the standard front pin and a 10mm m3 button head screw and a heat set insert in the…
Like your Rush, but wish the grip was a bit smaller? Wish no more! By the power of cutting out the old grip and sticking this one in its place, you can have a Lynx grip instead :D Updated 8/28/2024: Uses Crush v1.9 (or higher)…
Edit-There are 2 versions of steps for this. 1 with a trigger guard and one without. I used some of these files as a base for my personal lynx From the Remnant I used the trigger, sear, and pump which I added a ball detent into From the…
This lovely AFG with tightened tolerances for a tighter fit on the lynx priming block.
Polynesian war clubs general information In the late 18th and early 19th centuries, there was no steel or bronze in the Pacific. Hardwood whalebone and stone were the hardest materials. One of the dominant weapons was the club. Simple but…