Many The Monmoth
Manny the Mammoth from Ice Age.
- Downloads
- 347
- Likes
- 93
- Rating
- 0
830 models
No supports required for printing. I'm providing three models here (2 just with the same original proportion, and one improve for better details). One includes the complete knot, while the other is a diagonal version that conserves…
Hollow Maps of European Countries Made with tracing the inside onto paper in mind. Size: 160mm X 160mm X 1mm thick. Can be resized in you slicer. Layers: 0.2mm or less. Countries so far: FRANCE, GERMANY, POLAND, ITALY.
Hello friends from all over the world :) This is a piece of art. Handmade in a craft bakery. You can print it in different sizes. I scaled it down to use it with a keychain or for decoration, but you can also print it in original scale.…
Hello everyone, I'm just wanting to showcase this model. It is a simple thing that can just hang on your door, and I have been working on it since Oct. 5. It has English, braille, Danish and a whole lot of languages from all over the…
Wanna get the commercial license? Have a look at my printables club. Your wished logo isn't available? Ask me! Maybe I make it. ;-) I have created a helmet hook, which has a wide contact surface so that the padding of the helmet won't get…
Disclaimer : These models are created with the help of AI tools, but always refined with my own ideas, prompt work, and post-processing for printability. I deeply respect traditional 3D designers and their craft, and my goal is simply to…
These spacers are easy to print do not require supports or any glue. Don't have a 3d printer but still want these spacers? DE: https://www.megahobby-kugelbahn.de/ * Also want to sell my models? send me a message Updates 2-1-2023 Made the…
V2 16.03.2024 Changes: Thicker walls, as a few people require. Few more sizes added (only for V2 version): [mm] 130x80x42, 130x42x42, 100x42x42, 100x80x42, 90,80,42, 80x80x42, 70x80x42, 60x80x42x50x80x42. If you want the same depth and…
It's a nice case with a screw lock for 2 decks of playing cards. There are 2 versions: one for two decks without tuck boxes, and one for 2 decks with tuck boxes (not shown). It prints fully assembled ("print-in-place") and doesn't need…
🇩🇪 Willkommen in Deutschland! Welcome to Germany! The Brandenburg Gate ( Brandenburger Tor in German) is an 18th-century neoclassical monument in Berlin, built on the orders of Prussian king Frederick William II. Throughout its existence,…
If you're looking for my Bambu print profiles, they're at MW . If you're looking for my Bambu print profiles for version 2 , they're here. Update (10/2025): There is now a version 2 of the Plant Stem Support ! Now this doesn't mean this…
April 15, 2026 Update : There is a new tray to hold Trover along with all of his skill dice, initiative die, chips, heat-up peg, the relevant tyrant dice, and his bag. I also added a miscellaneous card tray to the top tyrant drawer. You…
Help: Every washer is 1mm high , if you want higher washer just scale it in Z direction by this formula to get desired height : height[in mm] = percentage/100 ID - Inner diameter, OD - Outer diameter Expectations: Don't expect a washer…
3d miniature of the highly requested Nürburgring in Nürburg, Germany! Includes a colorized version highlighting the Grand Prix circuit! AMS and MMU compatible using the .3mf files. I'm primarily a Bambu user so let me know if the MMU file…
Nurburgring Nordschleife, Nurburg, Germany, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
3d miniature of Berlin, Germany! Collection of all my miniatures: https://www.printables.com/@jarvizar/collections/1124416 I have many other exclusive miniatures available for free on MakerWorld ! Printing & Slicing Details This model was…
3d miniature of Hamburg, Germany! Collection of all my miniatures: https://www.printables.com/@jarvizar/collections/1124416 I have many other exclusive miniatures available for free on MakerWorld ! Slicing & Printing Details This model…
A Collection of Rubber Stamp handles for either 3D Printing or Laser Cutting. The 3D Printed Version was Printed in Black PLA+. You can also print the included Cover/Caps to keep stamp ink from getting all over the place. The Laser Cut…
If you like me parts, you can also support me here: https://buymeacoffee.com/andretheengineer :) I designed this travelcase, so i can securely take my trusty oneblade with me on vacation. works with magnets size: d6x3; d5x4; d5x3; d5x2;…
I remixed the very nice design from @Braadlee to repair my Renault/Dacia Logan key which have a round lock button. The design should match many others cars from Dacia/Renault or at least the French market. V2.0 ! The scale size is now…
Easy print, upside down with no supports. Recommend TPU or other flexible plastic. It fits tight on 4 different size cans. There are 2 different sizes in the middle area for small cat food cans, push all the way down to click on cans like…
I was looking for a bag clip I could use to seal opened up but not yet empty bags (stuff like spices, snacks and the like). Although there are a ton of designs floating around already I couldn't find one I really liked. Most designs are…
Made this controller wall mount holder because I didn't want to use screws. You can use any double-sided type you like ( the one I used ). Stick two lengths to the back (see picture 4) and stick it to a wall and you're done. I've been…
To reduce the dragging friction of the filament which can cause instability in 3D printing, especially for those printers that have the filament spool on the upper crossbar, I thought of replacing the default spool holder of my Eleggo…
These draw/discard trays keep cards in place. Available in a variety of configurations, such as one, two, three or four bins. (The smoothness of the angles will be largely determined by your layer height resolution.) These were designed…
I wanted to print a large-ish Honeycomb wall on my Ankermake M5 (a 235x235 bed-slinger). Searching around, I found Honeycomb Storage Wall for 235mm^2 print bed by @sbufe which is best sized for the M5, but I also wanted borders/edges. So,…
Testing ongoing ! Experimental ! Centrifugal fans have an uneven air flow at the outlet opening. The original and various other print fans therefore have different air flows on the left and the right coolig outlets. To counteract this,…
Update 26.02.2024 Added Freeride small basket Uploaded beefier snowflake baskets (v5) after breaking some of them Update 01.02.2024 Added snowflake basket It's carnival season 😂 Update 21.01.24 Added various basket shapes and updated…
As I am a goldsmith, I was looking for some design jewelry display for my own made jewelry, which I could have in my workshop. I did not find any cool, so I had to make one for myself. So here it is for you… These stands are suitable for…
A 3d model of germany with increased z scaling.
Since twist locks (bayonet locks) are round, they don't match square boxes that well, usually resulting in an opening quite a bit smaller than the ‘storage area’ inside, like my previous square twist-lock box . This model however tries to…
3d miniature of Munich, capital of Bavaria, Germany! Collection of all my miniatures: https://www.printables.com/@jarvizar/collections/1124416 I have many other exclusive miniatures available for free on MakerWorld ! Slicing & Printing…
I often spill some ground coffee when making a moka pot. I 3D printed this funnel to make it more foolproof. Right now just the Bialetti Moka Express 6-CUP is finished. More available soon! I’d love to make this for all popular moka pots.…
Just print in TPU, infill 30%, supports needed. Original file is for tools with a diameter from about 25 to 40mm
Intro Sometimes a print may leave little marks on your print bed - some of these marks are hard to remove even if you use a print bed scraper. This print bed cleaner will easy the removal of all those annoying marks. Easy usage: Just…
This screwable Adapter/Connector (5 cm) connects two junctionboxes (Bruno Germany). It is designed only for my boxes. In the case you need more then 4 inputs connect two boxes and you solf the problem. This 8 by 8 bfy 5 cm junction boxes…
This is a remix of 3D Printy's Emoji Printer Bobbleheads to allow the fitting of my racing driver and other figure heads (which I've also included in this model). Due to the additional weight I find it best to use the “Stiff” spring from…
https://www.patreon.com/WWIIHistorical3DModels 🚀 Join the Community & Get More! If you like my work, consider supporting me on Patreon . By joining, you help me keep creating high-quality designs for everyone! What you get by becoming a…
Gridfinity bins for drill bits. There are several heights and lengths so you can print what you need based on the drill bits that you have. It makes no assumptions whether you have drill bits every mm, or every quarter mm, or in imperial…
I modified an existing Honda door rod clip design (shout out to @akf_was_here ) to work on my 2004 Accord. I made the clips just a little more robust to help avoid snapping upon installation, made the hole a tad bigger, and scaled all…
Using the builtin Garmin mount of the Elves Orome TT Mount, I've made a bottle holder (design specifically for XLab cages to get two bottles upfront on the bike. It uses the included 100mm bolts from the front TT kit to screw together and…
Similar to many people, I was looking for a modular drawer system that would suit my needs for smaller items in my workshop. There are many designs available, but I found all of them lacking in some way, so I decided to create my own…
For those who want to cover a frayed, drilled hole in their desk. Diameters are according to holes drilled by means of saw rims with standard sizes of Ø 25 mm, 32 mm, 38 mm, 44 mm, 51 mm, 57 mm, 63 mm. The desk grommet/hole cover provides…
Quick to print, consider its size. I created it to fit to rods for diameters from 16 mm to 26 mm. No supports. No additional hardware or tools are needed. Only printed parts. Nut from back fits to all uploaded sizes. Nut is slim and you…
This is my Version of and Insert for my Too Many Bones Collection. It holds everything in 3 Boxes but the Components for Splice and Dice. I have printed everything with my Prusa mini+ but the Gearloc Tray for Riffle. For those of you with…
Ideal for presenting gifts (money, letters or vouchers)! A CODE CRYPTEX with six number rings. The six-digit code can be set as desired. There is a wide range of options for designing the CODE CRYPTEX. In addition, a core can be added as…
I designed these feet to protect a wooden floor from the metal-pipe legs of a couple of chairs. With the exact angle of the legs, the base of the feet is flat on the floor, reducing the risk of damaging the floor. Update 2025-08-06: This…
This is a remix of the “Dodgy Too Many Bones and Undertow Character Case” by tpancoast found on thingiverse: https://www.thingiverse.com/thing:3985965 The 3 boxes store all non-Gearloc dice and tokens from the base game and expansions 40…
I'm back at replacing my local hardware store. This time with copper pipe straps for 1/2" copper pipe. Blender file included. The first one ended up being a bit tight so I made a slightly bigger one in case you don't need it so tight.
Created with photogrammetry (freeware: VisualSFM + Cloudcompare + Blender + Meshmixer) When you are interested in Lowest Budget 3D Scanning, you might also like: https://www.thingiverse.com/thing:2755968 Check out my other collections of…
Designed a parametric model for T-Nuts, so I always have the correct size by hand. I just exported all common sizes, but if someone needs the parametric NX model just reach out to me or ask me for specific sizes. These T-nuts use normal…
This model is for bed size 210x210 Do not scale down the model because the hinges will not work! If you have a Prusa Mini then visit this page instead https://www.printables.com/model/237266-box-print-in-place The Model is Print-in-place.…
These are dice and chip storage trays for the Gearlocs in the board game Too Many Bones. Sliding lids for the trays are available in a separate posting at: https://www.printables.com/model/511136-too-many-bones-gearloc-storage-tray-lids…
UPDATE: for some reason the 3 slot mid-rear size was incorrect, has been fix and update in download this is a great way to put all your nuts and bolt in one place along with spare parts, this is great for any brand printer.. one of the…
DEUTSCH (English description below) Die Deutschlandkarte setzt sich zusammen aus 16 Teilen, je eines für jedes Bundesland. Die einzelnen Teile passen perfekt ineinander. So könnt ihr die Karte als Puzzle, zu Lernzwecken oder einfach als…
Increase air flow for SATA drivers Opened the window for OLED display All screws are now using m2.5 Fixed the opening for pi5 USB Fan openings are bigger. The chamfer for bottem plate now are 45 degree for easy printing Remove useless…
This small gadget will let you open most shopping carts for euro coins. To use in other countries, please scale (in all axis) to different size. I noticed there are many gadgets of this type, but I designed this one from scratch and…
Here are different models of funnel diameter 80 mm on picture, and other for various uses. Print them in PETG, PLA+ is also suitable, avoid putting them in the dishwasher, or running them under too hot water which would deform them. No…
I customized the entry of Gloomsen (https://www.printables.com/de/model/211006) a little bit: thin out the walls, for faster printing add an edge to the cover and thicken it a little bit, to make it easier to remove the cover from the…
I’m excited to introduce the latest update! I’ve meticulously tested all the models to ensure they function flawlessly, refining each detail to enhance performance and reliability. A significant amount of time and effort went into…
Here are some undead monster remixes using my Two Cent Base design. Tree supports touching build plate will handle most of them, but some need to be tipped backward and printed with a raft and tree supports to come out well. Credit where…
Anmerkung: Dies ist für Modellbauer, die bereit sind, das Modell weiter zu modellieren. Es ist die Basis für eine Burg des Mittelalters und erfordert zusätzliche Materialien wie selbsthärtende Modelliermasse, Gips, Streumaterialien und…
Design These items are made to fit to standard fans commonly made by computer, chassis and rack fan manufacturers so that they can be more securely sealed to a fitting you are connecting it to. The gaskets are available in 0.5, 1 and 2mm…
The Cup of Many Uses: Dice cup Pencil holder Can Koozie Small planter Snack cup for M&Ms / Skittles / gummy bears “So many uses, the only use it isn't good for is as a drinking glass” - user of cup
Map of the states of Germany (Deutschland). It is 3.5mm thick. Hamburg and Bremen print, but are unattached. Printing: Printed at 25%, except for height which is 100% I sunk it -0.3mm to ensure contact with the bed. Print Settings Printer…
The most pluck-in holes are not deep enought for easy removal of socket protectors. This one has a deep of 12mm. The part has a total height of 16mm
Crazy end caps for a 20x20mm aluminum profile for Nut 5 & 6 mm If you want a special version, let me know. I will create it for you Different versions: Normal, closed With hole in the middle for cable feed through Cap half round Cap round…
Prelude I stumbled across OpenSCAD while looking at another tile grid design. It was a tool I hadn't come across before and it piqued my curiosity. This first design was intricate and complex and proved to be a steep learning curve. When…
Print the “Generic Game Board” (GGB) and you can play lots of games with it. The GGB is ideal for travel, as the integrated game pieces won't fall off if you tilt or bump the board. The integrated pieces means there is no pack up required…
Brackets for joining computer fans together. Supported fan sizes: 220mm 200mm 140mm 120mm 92mm 80mm 70mm 60mm 50mm 40mm
These are sliding lids to accompany the Gearloc storage trays for the board game Too Many Bones. The storage trays have been posted separately at: https://www.printables.com/model/511137-too-many-bones-gearloc-storage-trays. Each Gearloc…
…Please be sure to hit like & post a make, I'd love to see your prints! The Vortex series grows with Gemini! Print faster with crisper cleaner looking prints! These lightweight mirrored modular pods each carry a powerful 24v 6020 fan that…
🇩🇪 Wilkommen in Deutschland! Welcome to Germany! This model was originally created by Elia, aka @3d_steady_go . This amazingly detailed model also hides a secret - the fountain is a pin that when released allows a drawer to slide from…
Bento format stadium for Too Many Bones to hold chips and cards during play and facilitate saving between sessions. There are 5 pits designed to hold cards : Unresolved encounter cards (Rencontres) Resolved encounter cards (Passé) Loot…
Edit 01/2020 : Added a different version designed to be protected by epoxy resin. See the make for a preview. This is a round badge for replace the one one the side body of a BMW F800R 2010. This represent the coat of arms of germany.…
With this plug (TPU material) you can close unused openings from my junction box. This 8 by 8 by 5 cm junction boxes from “Bruno Germany” (for antenna and speaker cables) features two or three inputs and can be securely attached to a…
These are divider tokens for separating categories of Baddie chips in their storage containers for the board game Too Many Bones. The dividers were inspired by the design of Fabmaszter. Each chip has the Baddie Type icon and point count…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
I created this minimalist gift tag to add a touch of elegance to your gift-wrapping. It's a thin, lightweight tag that prints quickly in two colors, perfect for attaching to a ribbon or bow on any gift box. This design is simple yet…
The main characters from Too Many Bones. I don't own the rights to the characters, but I decided to throw together the characters as a present for a friend. Made for resin printers. If you make these, I would love to see a make.
Too Many Bones - Day/Progress tracker I don't have the official Adventure Map. So I put together a bunch of files in Blender and created this Day/Progress tracker How to Use The bones at the top function as an arrow to mark the day and…
Nurburgring, Nurburg, Germany, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different color…
SO MANY FLAGS! 🇫🇷 🇮🇹 🇩🇪 🇳🇱 🇧🇪 🇮🇪 🇳🇬 If you are obsessed with flags, have international friends, or simply don't know what to do with your color filaments, this Flag Coaster collection is for you! Here is the most versatile & popular flag…
This is a remix of the “Dodgy Too Many Bones and Undertow Character Case” by tpancoast found on thingiverse: https://www.thingiverse.com/thing:3985965 After printing the excelent Dodgy Too Many Bones Character Cases, I wanted some Tyrant…
Created with photogrammetry (freeware: VisualSFM + Cloudcompare + Blender + Meshmixer) When you are interested in Lowest Budget 3D Scanning, you might also like: https://www.thingiverse.com/thing:2755968 Check out my other collections of…
Chip für Einkaufswagen Vergleichbar mit einer 1€ Münze Ausschließlich für Deutschland
35mm x 16mm dragchain easy scalable, durable, easy to assemble and print. Just add as many links as you want! Included are the start and end piece, as well as the links, which you have to multiply and a retainer to keep annoying cables in…
This is project I made for elementary school education. It should help the students to get to know the german states and their order. Print the small states (Bremen, Berlin, Hamburg) with .25 Nozzle, the rest is printable with a .4 Nozzle.
One of my favorite sculptures, on display at the Liebieghaus in Frankfurt, Germany. 3D scanned using Polycam, cleaned up in Blender. Printed with Silk PLA and Marble PLA .
By the past I bought that easy shelf brackets that hold a shelf by it's own weight. Unfortunately, I could not find it anymore in the neighbourhood. So I decided to make my own, and make it parametric, so I'm able to adapt it to any shelf…
Hooks are reinforced by wood screws. Stronger than HSW itself.
I could never figure out what the maps were indicating when i was little. So i made one that i would have been delighted with as a kid. As you print, if you don't have an automatic color changing system, I have implemented a few stops,…
Created with photogrammetry (freeware: VisualSFM + Cloudcompare + Blender + Meshmixer) When you are interested in Lowest Budget 3D Scanning, you might also like: https://www.thingiverse.com/thing:2755968 Check out my other collections of…
Print with 3 walls. No brim required usually. f360 file included.
be careful when taking off supports, you might break the light!
So this is the second country i've made now. Started out with Norway and now Germany. Only 193 to go?…. Anyways, i printed mine with PLA an 15% infill. Used outside brim witch removed very easily when done. The hole in the base is made to…
a fun crown I made while playing around with the revolve and pattern functions in fusion 360
I designed electrical outlet stand-off spacers for securing outlets to the electrical box while keeping the outlet flush with the exterior wall surface; that model is here: However, when installing and sizing these spacers, it was kind of…
My Toyota Avensis battery compartment cover has a badly made plastic wingnut which I think is designed to be shoved on in the factory for sheer speed, and then unscrewed to remove. The only contact between the nut and the threaded shaft…