9,999 models
support needed coz of claws. i printed mine on 0.15 but on 0.2 will look great also. Orginal Link: https://www.thingiverse.com/thing:5222826
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant
Easy to use Easy to print
Print approx. €1.29–€1.58 excl. taxPreliminary estimate for PETGSource material: PET
Printed with regular 0.15mm quality profile in Prusa slicer with PETG .
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
This is a marking-gauge for woodworking purposes to mark the same measurements against different edges. I found some existing marking-gauges around but wasn't able to adapt them to my ruler measurements. So I decided to make my own in…
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for one variant
Animal bookmarks are a set of 3 adorable bookmarks. Individual bookmark make time: 15 Minuets or less ! Set make time: 41 Minuets Filament use: 1.5g (estimate) varies depending on model Great gift which can be used to show people what you…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
The new center marker, now with ruler incl. and a more robust design !!!
Print approx. €4.02–€4.91 excl. taxPreliminary estimate for one variant
Simple, thin, feather-shaped bookmark. Printed in translucent PETG with color change for contrast.
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for PETGSource material: PET
This bookmark features the leaves and flowers of the tradescantia , which is also known as the wandering jewel, inchplant, or dayflower. (I think it's probably tradescantia zebrina .) I originally designed this as a gift for my friend ,…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
Compact Circle Marker A rotating axis with a cutout to guide a pen for precise circle drawing. Perfect for DIY and 3D printing! The measurements are in centimeters, with a hole every 0.5 cm to offer more circle size options.
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
Bookmarks for Hogwarts Houses, Gryffindor, Slytherin, Hufflepuff and Ravenclaw with Harry Potter references. Credits SVG files used from the Noun Project Time turner by Made x Made Golden snitch / Potion Bottle by Locad Slytherin /…
Print approx. €0.67–€0.81 excl. taxPreliminary estimate for one variant
This saddle t-square allows you to run lines parallel with an edge or perpendicular to it. It wraps around corners so you continue a line down an edge. The diamond shaped wholes keep your pencil centered to the line you're marking and…
Print approx. €2.22–€2.71 excl. taxPreliminary estimate for one variant
Perfect for drawing lines at the right distance
Print approx. €1.77–€2.16 excl. taxPreliminary estimate for one variant
Recommended material PLA Print settings Layer height = 0.2 For PET reflective film markers ϕ=10mm (6mm dot) https://www.aliexpress.com/item/1005007012274939.html?spm=a2g0o.order_list.order_list_main.5.68971802SpDi3O
Print approx. €1.51–€1.85 excl. taxPreliminary estimate for one variant
Designed in collaboration with my wife (the knitter), to at least match the performance of her favourite mass-produced injection-molded knitting clips. (I figured there was not much use making something she wouldn't use anyway. Took me 6…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
This is my take on path markers for the Arkham Horror LCG. As I do not have so much table space, I wanted to have small markers, which can be placed inbetween the cards without having to spread the cards too much. The single and double…
Print approx. €1.41–€1.73 excl. taxPreliminary estimate for one variant
Inspired by the stainless steel book darts, I wanted something simple to print, small, out of the way. The book darts function as a book marker, keeping your place where you left off with the “arrow”. It can also be used as tabs to…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
In only 9 minutes you can have a Keychain multitool, with 9 tools. Printed 0.2 layer 60% infill, im used Petg Carbon. -Supermarket Trolley 1€Coin -Big hex bit -Small hex bit -Screwdriver -3mm Tyre recommended change -30mm Ruler -Bottle…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
A bookmark I designed to match the book I'm currently reading - "Every tool's a hammer" by Adam Savage. I printed this with Mango Yellow Prusament PETG, which really matches the color of the book sleeve nicely :) If you print this with…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
A bookmark with roses, print it with filament swapping to get a dual-color print! For extra smooth surfaces, tick in ironing in your slicer!
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant
Preparing for tire swap season, these marked tire caps shall help by permanently marking the tire position. Print using PETG , TPU or similar weathering resistant material Print the first 3 layers very slowly to have precise letters…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET
A bunch of cute little animal pals to help hold your papers or perhaps mark a page in your favorite book. Great for using up those small bits of filament left on your roll. These are ready for print, no supports etc. If you're one of…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
I created these simple dividers to separate sections of 3-ring binders. They've worked for me for a few years as both dividers and as place-markers. Printing instructions Nothing special - just slice it and print it. I used solid 100%…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
Halterung für handelsübliche Tuben wie z.b. Tomatenmark, Senf, Remoulade usw. zur platzsparenden/ sicheren Aufbewahrung im Kühlschrank oder Vorratsschrank Passend für 8 Tuben. Holder for standard tubes such as tomato paste, mustard,…
Print approx. €4.60–€5.62 excl. taxPreliminary estimate for one variant
Záložka do knihy s motivem Westika. A west highland terrier bookmark.
Print approx. €0.46–€0.57 excl. taxPreliminary estimate for one variant
Bookmark for How to train your dragon fans, it has the strike class logo on it which is the class Toothless is in
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
These small easy to print bookmarks are the perfect gift for the Star Wars reader in your life. They are also a great way to use up the end of a spool since they take less than half a meter of filament each. A card is included for gifting…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
@JohnWayne_287636 made a beautiful design. I just made it sturdier.
Print approx. €0.72–€0.89 excl. taxPreliminary estimate for one variant
Customizable stencil for marking pickleballs to be able to easily tell which ones are yours. I've included the original stl shell that fits 73mm diameter (standard) pickleballs (I tested this on Onix pickleballs, shown in pictures.) Load…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
Designed for dog lovers, these stylish clips feature outlines of various popular breeds, making them a unique and fun addition to your office supplies. Features: 🐾 Nine Dog Breeds – Includes Poodle, Akita Inu, Shiba Inu, Dachshund, Pug,…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
Bookmark for students or really anyone, who likes science. You can print it with PLA or anything else. I made it with 0,4 mm nozzle, however it would probably be better with 0,25 mm. But it works and looks nice anyway. For the different…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
Simple bookmark with symbol Akatsuki from anime Naruto.
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
A set of bookmarks featuring common airliner silhouettes.
Print approx. €1.60–€1.95 excl. taxPreliminary estimate for one variant
Roblox bookmark with dimensions 80 x 100mm. The model is divided into 2 colours.
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant
Anneau de pouce pour la lecture Deux tailles disponibles : 19 mm et 25 mm
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for PETGSource material: PET
This paintball marker setup wall mount was designed with the intention of being both simple and easy to use. Simply print both pieces out of high-quality PLA and then do the following: Mount the large tank holder to the wall using drywall…
Print approx. €20.57–€25.14 excl. taxPreliminary estimate for one variant
Bookmark with Venator starship. It's the best idea to print it on 0,05mm layer height. Better don't print it with dark colours, because you may couldn't see details. It's my own project, but i got inspired by this model:…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for one variant
This is my slowly growing collection of bookmark designs, super fast to print. All prints have been tested, and include: Pac-man Ghost Edible Pac-man Ghost (don't eat it!) Dress Snowman Mr Hankey Fish Scary Face Eye of Sauron Chrismas…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
This simple bookmark features a representation of Great A'Tuin and a quote by Terry Pratchett. The design of the Great A'tuin was inspired by the works of Paul Kidby. More of his works can be found at: https://shop.paulkidby.com/featured/
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant
3D bookmark with a cat on top of your book. I printed it 0.15 layer height, 15% infill in white PLA.
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
Balmbu Lab X1C: For best results models have to be scaled up by 10% so the border lines will be thick enough for printing with 0.4mm nozzle. or line width in print settings need to be changed down to 0.35mm. Embark on a delightful reading…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Easy way to mark and label your changed tires. Just remove the cap of the valve, slip on the marker and tighten the cap. Einfacher Weg um gewechselte Reifen zu markieren. Einfach die Schutzkappe entfernen, Kennzeichen über das Ventil…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
You wanted it so badly - here it is - Europe with Denmark
Print approx. €4.39–€5.37 excl. taxPreliminary estimate for one variant
Helpful markers for tracking the dizzying number of suspects and clues. Update: Now with hexagon markers!
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant
Simple cute bookmark. Available with hole to add cord if desired. Two models with holes are available, one with 2 mm diameter and the other with 5 mm diameter. 1 mm thick, 4 cm per 14 cm
Print approx. €0.39–€0.47 excl. taxPreliminary estimate for one variant
A small token to replace the pound coin needed to release a supermarket trolley. Printed in PLA at 0.3mm with 5% infill. You could cut down on top and bottom layers but it makes so little difference it is not worth the time.
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
Spell AoE (Area of Effect) Damage Marker for Tabletop RPG Games on a Standard Square Grid. This Model includes multiple areas in one object, so you don't have to carry 5 to 8 AoE-Markers around. It has also different heights for different…
Print approx. €2.89–€3.53 excl. taxPreliminary estimate for one variant
Recently I was in need to mark my WAGO terminal blocks, but I didn't want to buy WAGO's markers because it requires a special printer and can be bought only as a quite large coil. This is not the exact copy of WAGO's WMB marking as the…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for PETGSource material: PET
Just a simple bookmark 3 layers (of 0.2mm) thick with fantasy strings. Easy fast print. The central line is added for strength. The extra bulge (can be folded over with V1 and is present in fixed form in V2) is to prevent the bookmark…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
A nice gift for your loved ones and yourself. A simple bookmark for book readers. Don't forget to reduce the Z scale when you change the scale. Make sure the Z scale is 1mm. You can print in different colors. You can use any filament you…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
Have you ever had to draw a circle in pen but your compass had only a pencil tip? With this simple and small print you can screw to the compass colour pencils, pens, markers… Print it is shaped in a easy-to-print shape doesn't need…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
The legendary @ kriswillcode 's Fidget Toggle Switch, a bit fine tuned for mass use, durability and easy print for all friends and friends of friends. Click once and you are hooked. Really addictive. Use a tiny bit of candle wax on the…
Print approx. €2.79–€3.41 excl. taxPreliminary estimate for PETGSource material: PET
I have a Quartet Whiteboard and designed this 6-marker holder that slides over the whiteboard at the top. I printed mine in black PETG. 1-Jan-2024 - Added a version with 1.9mm holes for markers made by other brands such as Expo.
Print approx. €6.15–€7.51 excl. taxPreliminary estimate for PETGSource material: PET
Print the two walls separate, bend and glue into place.
Print approx. €3.40–€4.16 excl. taxPreliminary estimate for one variant
For best effect print with a different color from the logo layer.
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
If your MEC 600Jr Mark V is mounted to an Inline Fabrication Quick Change plate, you've probably noticed that the spent primer catch tray that comes with the MEC does not fit properly because the rear-right mounting screw that comes with…
Print approx. €2.83–€3.46 excl. taxPreliminary estimate for one variant
I load a lot of buckshot when reloading shotshells and therefore wanted a way to keep dust and debris out of the shot and powder hopper ports/charge bar on my MEC 600Jr Mark V when they're not in use. I designed these simple threaded caps…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
Po zkušenostech s modelem https://www.printables.com/cs/model/415374-zalozka-do-knihy-ctyrlistek-bookmark-cloverleaf jsem namodeloval tento model. Neničí stránky knih jako výše zmíněný typ záložek. After experience with the model…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
dnd miniatures for random encounter or hiden monster. the G code file is already suported
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
Check out this short video of the Anya I made :) https://www.youtube.com/shorts/DnFY0eHya40 Anya Forger from SpyxFamily free standing model. Printed in black and white then colored the model with sharpie markers.
Print approx. €2.63–€3.21 excl. taxPreliminary estimate for one variant
Ständer und Halter für Filament bis 1 kg alle Hersteller
Print approx. €5.49–€6.71 excl. taxPreliminary estimate for one variant
Use this simple tool to accurately mark each LM8UU or LM10LUU bearing in your next build with a permanent marker for precise alignment every time. Prep Clean off the oil film on the outside of the bearings before marking with a permanent…
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for PETGSource material: PET
Requires a bit of force to mount Use Supports on build plate CAD: https://cad.onshape.com/documents/5ba107f85dbf2a410cf25720/w/0fec43ad386a43c19f2120cf/e/2c120b52248bc3e970ff815d (not my neatest CAD, sorry! :P ) Leave a comment if you'd…
Print approx. €4.23–€5.17 excl. taxPreliminary estimate for one variant
Easy tire marker for your car - mark when changing tires for winter and summer. Avoid getting the wheels on the wrong way after storage... :) Can be mounted with zip-ties or fits over the air valve for easy placement. Marks (English): RF…
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for PETGSource material: PET
Printed with variable layer height. Standard Parameters.
Print approx. €1.59–€1.94 excl. taxPreliminary estimate for one variant
Made this after I signed for a space selfie here like this. After you sign you'll get a free patch of this image bellow. So i tried to make into a keychain. I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No No MMU/AMS needed.…
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant
First 2024 design in my Bookmark Tanks Collection! For this design I tried to capture little more details in the model without losing simplicity. I hope you like it! Introducing Sherman M4A1! Sherman M4 bookmark for those thrilling war…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
Sports Bookmark Set – STL File (Set of 4 Bookmarks) Perfect for coaches, classrooms, and book-loving sports fans! This set of 4 sporty bookmarks includes designs for football, soccer, baseball, and basketball—each styled with a bold black…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
This is a remix of Sebbeienburk's great pencil stand. The remix can hold 30 pencils with a maximum diameter of 12mm and 2 markers with the dimensions of 13x25 mm.
Print approx. €13.21–€16.15 excl. taxPreliminary estimate for PETGSource material: PET
Atom shaped bookmark
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
Typographic Stencil Ruler for Markers and Sharpies Description: This versatile typographic stencil ruler is designed for use with markers, Sharpies, and other broad-tip pens. It features characters from the Pauza Stencil typeface,…
Print approx. €2.87–€3.51 excl. taxPreliminary estimate for one variant
If you're like me you plant a lot of seeds in your vegetable garden and forget what you planted where. I made these to help me remember. Included is a gcode for a Elegoo Neptune 4 using PETG. In order to get the correct colours you have…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for PETGSource material: PET
Easy 43-minute print that requires only 5,33g of filament
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
Igloo 5 Gallon Drinking Water Cooler Cup Holder for Solo Cups with marker holder I wanted to use larger solo cups with my cooler when at outdoor events. I think the stock tube comes is smaller, for the paper disposables. With this…
Print approx. €4.29–€5.25 excl. taxPreliminary estimate for one variant
To say that my significant other loves goats would be a pretty serious understatement. These goat bookmarks are just a fun little item to put a little smile on your face every time you pick up your book. We have pet fainting goats, so as…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
I thought the original design was too thick and damages the pages of the books. This is only 0.8mm, instead of 1.5mm original, which is much more friendly to paper pages.
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
You need a square nut M3 and an Allen screw M3x6mm
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for PETGSource material: PET
A bookmark with a turkey, espero que gostem You can print in both colors just by stopping printing halfway through Check also my model of this Turkey but keychain version Hope you like it
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for one variant
Printed on Prusa Mini+. Turned out best when aligned “longways” with the movement of the print bed. I used organic supports (build plate only) on the overhangs of the front of the basket.
Print approx. €4.68–€5.72 excl. taxPreliminary estimate for one variant
The holder can be fixed to a wall with two screws. The dimensions are optimized for whiteboard markers from the manufacturer Staedler (18 mm diameter). Instructions for printing For a better print quality, you can print the holder…
Print approx. €5.61–€6.86 excl. taxPreliminary estimate for PETGSource material: PET
If you're like me you plant a lot of seeds in your vegetable garden and forget what you planted where. I made these to help me remember. Included is a gcode for a Elegoo Neptune 4 using PETG. In order to get the correct colours you have…
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for PETGSource material: PET
Print it with PLA and set color change in PrusaSlicer: Start with Yellow On Z=1,4 change it to Black On Z=1,8 change it to White On Z=2,2 change it to Blue
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
This is a combination stitch marker and stitch counter holder. I've included a set of size 4 through 10. It's a nice companion to my size tags ( https://www.printables.com/model/209340-knitting-needle-tags ).
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
Pen Holder for whiteboard marker This model can be used as a whiteboard pen holder. Pens up to 17mm in diameter can be used. Simply glue in some 6x3mm or 6x2mm magnets so that the holder stays at your whiteboard. No support structure…
Print approx. €1.00–€1.23 excl. taxPreliminary estimate for one variant
The "Great Wizzard" from Terry Pratchett's "Discworld" series. I found the line art used to create this bookmark in a Google search. The line art did not acknowledge the work of Paul Kidby, but I think it is obvious that this (…
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
Prints without supports with the text side down. Use color change to highlight the text.
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
This print consists of 3 things A wall mount/marker bin combo A marker bin A simple wall mount All 3 are meant to "snap" onto the edge of a whiteboard. I know they work with my whiteboard which cab be seen here…
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant
If you're like me you plant a lot of seeds in your vegetable garden and forget what you planted where. I made these to help me remember. Included is a gcode for a Elegoo Neptune 4 using PETG. In order to get the correct colours you have…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for PETGSource material: PET
NOTE: Files must be split to reveal the numbers. These are a multi material version of numbered miniature base markers I made to use with printed miniatures for the board game Gloomhaven. I printed them in white to represent the standard…
Print approx. €2.23–€2.72 excl. taxPreliminary estimate for one variant
If you're like me you plant a lot of seeds in your vegetable garden and forget what you planted where. I made these to help me remember. Included is a gcode for a Elegoo Neptune 4 using PETG. In order to get the correct colours you have…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for PETGSource material: PET
This is the latest and greatest Mechanical Pencil Cap for Paper Mate Advanced (aka. MPC for PMA, or just MPC ;) I don't know to whom I should attribute the head of Dwayne, The Rock, Johnson. That model has been put so many things, the…
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for one variant
This model slides onto the edge of character boards for the for the board game “Sleeping Gods: Distant Skies” to track health. This model avoids the problem of bumping the wooden health tracker that normally sits on the board. No supports…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
Für meinen PTFE-Halter habe ich diese Farbmarkierung erstellt, damit ich besser sehen kann, welche Filamentfarbe vorhanden ist.
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for PETGSource material: PET
This is my take on the iconic Question Mark Box from the Super Mario Bros franchise. I'm sure there's no shortage of models for this, but I took it on as a challenge to quickly build this from scratch. And in that effort, I'd say I…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
Záložky s motivy zvířecí kůže nebo srstí a čtyřlístkem. Bookmarks with motifs of animal skin and four-leaf clover.
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
Fast easy print.
Print approx. €0.26–€0.31 excl. taxPreliminary estimate for PETGSource material: PET
This is a stackable case that fits the Marklin 72090 H0 distribution strip. Put the strip in the case and keep it in place with the small circular “lid”. Then connect all your connectors through the holes on the side and close the case…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for one variant
If you're like me you plant a lot of seeds in your vegetable garden and forget what you planted where. I made these to help me remember. Included is a gcode for a Elegoo Neptune 4 using PETG. In order to get the correct colours you have…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for PETGSource material: PET
Comes in two versions, a regular and a thick. Regular 0.4mm thickness (aquila 1.8mm) Thick 1.0mm thickness (aquila 2.4mm) I've printed them in 3DE Premium Silky Silver and 3DE Premium Silky Copper
Print approx. €0.24–€0.30 excl. taxPreliminary estimate for one variant
Just a drip tray for the modern spiral planter. Sized at about 80mm square in the 3mf, step and gcode files to fit original model.
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for PETGSource material: PET
