Mazda MX-5 Miata NB for MMU
You want MX-5 and you also has a MMU? Here you go, I used PLA for print and it looks gorgeous. It would be nice to have PETG supports tho, separation could be easier.
- Downloads
- 749
- Likes
- 91
- Rating
- 5
509 models
You want MX-5 and you also has a MMU? Here you go, I used PLA for print and it looks gorgeous. It would be nice to have PETG supports tho, separation could be easier.
This is a phone mount for an NC Miata. It's designed to mount onto the air vent next to the glove box using zip ties. There are three versions, one is a AMPS compliant mounting plate, a 25mm ball joint, and a 17mm ball joint. There are…
a quick clean wallmounted 2d model of mazda miata na mx-5 for car-guys, if you like this model, id like to see your make, happy printing! (i advise to clean your printbed before so it does not come off, also rise the bed temps up a bit…
This is a backup camera mount for an NC Miata with the Advanced Keyless Entry (AKE) package. It a derivative design originally posted by "kiddingme". It is designed around the Nakita backup camera and moment buttons available on Amazon.…
Speaker adapters for a NA Miata. Fits 13cm speakers and was designed for these cheap and decent speakers JVC CS-J520X . In the file the left side is on the left and the right side on the right
Do you need this? Probably not. But if like me you are tired of holding both the funnel and the oil bottle; this will change your life. Designed for 1.6 MX5/Miata B6 engine. May fit other inferior generations of Miata. Print with the…
I created this cover to fill the hole created when you change you nc interior door handles to door pulls. These are just simple press in type covers.
This was the car that initiated my hotwheels collection. I thought it deserved a basic display in order for it to stand out from the rest of my collection. I tried to keep it basic so it wouldn't take the focus off the car. ---UPDATE--- I…
It is a very fast, print with two color changes , but it's without the need for MMU or AMS. So it means, you can print this model in just one color, or colorful like mine on the photos. Settings: 0,4mm nozzle 0,2mm layer height 100%…
Welcome to The Low Poly Auto Show! This is a low-poly Mazda Miata. Designed to be printed without supports at 0.1/0.2 mm layer height if you have a solid machine with plenty of cooling. I recommend you print this at full size, otherwise…
This the COOLEST way to hang keys in my opinion: Parts to Print: Backplate - 1 Main_body - 1 hook - 1 lifter - 1 Pin Small - 1 Pin - 1 light_Right - 1 light_Left - 1 Print Settings: Backplate: 15% Gyroid Infill, No supports Main_Body: 15%…
Update 06.09.2024: You will find a complete redesign of this model here . Update 25.05.2024: Added version for 4-color multicolor print (AMS & MMU). Edit: Fixed error in 3MF-file. Summary It is a model of a Mazda Miata / MX-5 (NB) in a…
Summary It is a model of a Mazda Miata / MX-5 (NB) in a kit card style. This is a complete redesign, based on the idea of my old model . This one has been redesigned from scratch with more experience and knowledge. Some characteristic…
Edit: thanks to FB user Kevin, it’s confirmed that it works with NAs as well. Although you can see from the photo that the vent outmost ring is slightly smaller than NA’s factory opening. Shouldn’t affect functionality, but aesthetically…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
MX-5 MX5 Miata Cam Gear Locking Tool by BEAVIS For B6/BP engines (NA/NB MX-5 miata, or some of the other mazda's of similar vintage such as 323)
Take off the useless sunvisor, use this to fill the hole! Uses the factory screws. 1990 - 2005 Miata / MX-5 Print it in PETG, ABS, or ASA. Do not use PLA for this, especially in warm climates. Enjoy! Check out my webstore:…
As you can see in the pictures, this is a two part design. You will need to print the mounting clip and the actual cupholder. The clip is mounted in the passenger footwell by removing the forward screw on the center console near where the…
A cupholder that slides into place on the back of the center console. Designed for NB1 Miata. May work for NB2 and NA (No testing done). Print in default orientation. Support might be needed depending on your printer. I printed on Bambu…
turn signal intake with 3/4" led light hole
model is now one piece rather than 3. Have also modified the bottom to be completely flat for ease of printing
EDIT: Some people could not close their gas cap lid after installing the holder for some reason. Some Miata might have a higher filler neck and/or lower gas lid. A 8mm thick version is now available instead of the original 12mm for those…
I made this to replace the factory wire “filter” because I got some leaves and other tree parts in my fan after 20 years. You need to remove the factory piece to install this and probably clean its remnants with a dremel. (The wire is…
I modified the original as it was too hard to print. I modified the model and fixed many of the imperfections and broken meshes. I also separated the wheels from the body as printing the whole thing with supports was proving a bit…
This is a modular Cup Holder System for the early (89-97) Mazda MX5 (NA) Miata. The bracket attaches to the side of the console near the radio/heater panel (left, right or both sides) using the existing screw holes. You may need to source…
Remixed from bbeavis design (https://www.thingiverse.com/thing:3063090) I printed his but it was too thin, so I decided to beef it up and also change the design. It's also 2cm longer to be closer to your shoulder. I advise you to print…
Showcase personalized automotive style with this 3D printable STL model of a Customized Mazda Miata MX-5. This tuned sports car model is perfect for automotive enthusiasts and personalization fans looking to display their passion for…
This is a Miata Visor Delete Plate with angled GoPro mount (to allow the GoPro to sit flat). This will fit NA and NB Miatas (1990-2005). I recommend printing in PETG or ABS. PLA will not last in a hot car and may melt or become tacky This…
Simple Miata teeth that doesn't require any additional hardware or adhesive. Slide it right in place and use the stock bumper attachment to secure it. (see pic. 2) Print in one solid piece without any supports. The only post processing…
Replacement Mazda Miata MK1 Hood Rod Clip. I printed mine in PLA and have been driving around with it for over 3 years now. Designed to be printed without a raft or supports. Update: ABS or PETG might be a better material because they…
Description: Interlocking 3d printed Miata wing. Pretty sure this is the most overengineered 3d printed Miata wing in existence. Also I'm pretty sure that it's the only one that's actually posted up for people to use for free. Wing…
A mazda Miata body to be used with open z V16 chassis, it comes with a 90mm wheelbase, using screws fixation. Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: Yes Supports: Yes Resolution: .15 Infill: 10% Filament: Does not…
Please see https://www.printables.com/model/970292 for the updated and much superior dual durometer design After testing numerous printable door bushings, I found most to be unsatisfactory. They either didn't fit properly, required…
MAZDA MX5 NB Miata Cup holder ('Project DEX'): ======================================= Purpose: ---------- This design is created to address the issue of having lack of a cup holder available in Mazda MX 5 NB (Miata) from the 90's until…
I recommend using the .3mf files. This is a modified version of Binchotan's console hinge from Thingiverse. When I tried his design, it immediately broke due to how thin the walls of the hinge were. I thickened the walls, made the hinge…
This is a wind noise reducer for the ND Miata. It attaches to the small triangle window next to the side mirror. It helps reduce the turbulence when having the windows and top down. Not tested on an RF. Print the step file for a cleaner…
Unlike the NA Miata(1989-97), The NB MX-5 Miatas(1998-05) do not have a radio bracket. The radio uses heavy duty clips that secure the unit in the dash. Due to this, installing an aftermarket head unit into an NB is more difficult than…
This is my take on a Miata throttle extention. Makes heel/toe shifting easier for my small feet. It adds 25mm to the width. I printed the one pictured in ASA, I also printed some prototypes in ABS and both seem strong. I used M4 heat-set…
Long gear knob design for Mazda MX-5 NB (fits not only NB). Also fits cars with dimensions: Thread diameter and pitch: M10x1.25
Removed those useless sun visors? This model is an easy-to-print block-off plate that fits Mk1 and Mk2 MX5/ NA and NB Miata. It uses the stock hardware to install and only takes 2 minutes. The models in the pictures are printed with a…
If you need a place to mount a switch but don't want to drill into your dash then you can now print out this fog light switch replacement. 2models, one with a 19mm hole for a momentary switch and designed to lock the retaining nut, or a…
This is a phone mount for an Mazda MX-5 NC. It's designed to mount onto the air vent next to the glove box using zip ties. Two zip ties in the top and one in the bottom as for the orginal. Print on the side with supports. 2025-01-27:…
I added the blue pages if you want to design it in fusion 360.
Front Crank Seal Install Tool - Mazda MX-5 Miata BP Suits all Mazda B6/BP 1.6/1.8 engines (except those with the small nose crank) Simply start the seal on the front crank nose, then slide the tool in place and gently tighten down the…
Clutch Alignment tool Suits Mazda MX-5 Miata B6/BP, also confirmed to fit ND miata. Not tested in other cars, but likely to suit more than just the miata. PLA with 50% infill was plenty strong enough.
I've uploaded two silhouettes of the ND MX-5; a convertible and RF version. Update Feb. 7, 2025 - Third item added. Per user request, I've added wheels to the convertible version.
Rear Main Crank Seal Install Tool for Mazda Miata MX-5 B6 BP Engines As seen in this video: https://www.youtube.com/watch?v=T0L0Rpsbdek
This is a phone holder I made for my 1994 NA Miata, It currently holds an Iphone 14 Pro. No customizations required.
ND Miata phone mount/charger that plugs into the cupholder socket. There are files for Left Hand Drive and Right Hand Drive, as well as a 17mm ball and a 15mm ball. Most phone holder accessories use a 17mm ball. I'm using this wireless…
6 month update: my motor blew up before these had any issue so I'd say they're good. They survived 110*F southern heat + 195*F thermostat valve. Who know you could make good hood vents out of plastic!? Plus on a dewy morning, you can see…
Mazda MX-5 Miata This is a model compatible with the LEGO system. Just print it, attach a LEGO chassis, and you're ready to play. Very easy, very simple.
Phone holder for use with cup holder. It features an additional stabilzer which should avoid too much movement or vibration of the phone when driving fast turns. It consists of several parts. I suggest glueing the arm, base and connector.…
Ball mount based phone holder for a NA/NB Miata that replaces the factory vent ring. The clips that hold the vent ring in place are a little loose in the source model, I opted to not modify them and instead add a spacer via small piece of…
V3 fixed some tolerances and rounded the top more to clear the mount better. V2.1 wider at the bottom and uses a M3 8mm countersunk screw V2 now with extra grip top latch fix for mazda miata mx5 i recently got a hardtop and one of the…
Cam Seal Install Tool - Mazda MX-5 Miata BP Suits all Mazda BP 1.8 engines (except VVT intake cam - I have a separate tool for that) Untested for B6 1.6 engines but possibly suits those also. Simply start the seal on the camshaft, then…
Wall Art Silhouette model of the Mazda Miata MX-5 NA Roll bar 1994. Adjustable size. I accept model requests and ideas.
Antenna Plug and Locknut for an NB Mazda Miata. The hole in the rear left quarter panel (on the '99-'00 for sure, cannot confirm on NB2 cars) is about 1" diameter. This plug is a .25" tall protrusion, and has a groove for a #119 o-ring…
Added the front OEM chin spoiler and got rid of one of the headlights since this side profile isn't supposed to have any 3D perspective to it.
This cup holder is designed to hold my wifes various seltzer cans that she needs to bring on every car ride. This should hold on to the back of the console without help but would do fine with the help of some double sided tape. Print flat…
I was in search for a phone holder for my Miata MX-5 ND. The only ones I found were ugly or required glueing or screwing something to the panel. Therefore I designed my own. This one is just clipped as you can see in the pictures. The…
These dimensions are only validated for NB Miata's equipped with the Bose stereo. Hole sizing in the model is 3mm, intended for OEM screws. Also included are screw insert door plugs in case any of your factory door inserts have…
The unobtainable JDM airbag switch replacement cubby. As well as a blank plate to make whatever your heart desires with. change drawer, a switch or guage plate? Print instructions So this year, again, The 49 code was flashing on my dash…
I didn't have the bed space to make it larger, else I would have made the rear angle larger to better contact the rear firewall. Inspired by: Miata Fuel Pull Cover (NA) thing:4545328 josh7owens Print using a skirt (preferably) and tree…
simple cupholder for your Mazda mx5, allowing you to have your beverage out of the way of the gear stick whilst keeping it well within reach! this simple design allows you to use the existing passenger side centre console screw (and cap)…
Mazda Miata Speaker Grill Cover (NA) The speaker Cover is 7" and has a 1995 Era period correct Mazda Logo Mount locations are 4 ½" on center Supports are needed, so make sure to calibrate your machine for this, as failed supports will…
I have been playing around with multi colour prints with my Ender 3 printer with a single extruder. I created a few designs for keyrings for the Mazda MX-5. There is 3 different designs, for the different eras of the MX-5 and a Miata…
For those who no longer need their antenna, this “delete” also allows you to charge your battery without having to pop your trunk. Updates: 10/7/2024: V1 has been archived in a folder, check out the new designs! How to assemble Find a…
Battery tray in my NB Miata was all smashed up and the battery was sliding and bumping around. Mazda no longer makes an OEM replacement so I designed a model in OnsShape based off the original tray. Split into two interlocking parts. I…
Miata Solid Door Bushing. Will solve your door rattle issues. Expect to notice an increase in stiffness. ABS or PETG recommended. I printed it in ASA with 3 perimeters and 15% infill. You can use more. No issues more than a year later.
Wasn't fully satisfied with how the other single piece "Ultimate" bushings performed; The 2 piece design solves every issue with door bushings, so they're longer lasting and have a tighter, more solid fit. They have the same adjustability…
Uses an m3 nut and m3x12 screw to bolt a handle onto the nub leftover on your broken dipstick. You will need to drill a hole in your dipstick to attach it. Print it on its side (close to the orientation it comes in) with a little bit of…
Fang for NA or NB miata, bolt on using stock bolt hole. Will need a longer M6x1.0 bolt to fit.
Newer style Fender vents to suit the front guards of a Mazda MX-5 Miata. I've fit them to my 2001 NB, but they should hopefully fit an NA (although the fender shape is different) Designed with aero in mind, to reduce wheel well pressure.…
print in TPU for best results. PLA would work, but some stick foam underneath would likely be needed to dampen and seal. Assembly: Mount Adapter to Speaker Mount [Speaker/Adapter] to car Includes file for TPU ONLY plugs if you want to…
Fender vents to suit the front guards of a Mazda MX-5 Miata - but likely to fit many curved front fenders. I've fit them to my 2001 NB, but they should hopefully fit an NA (although the fender shape is different) Designed with aero in…
Inspired by https://www.thingiverse.com/thing:4769678 and made before I knew https://www.thingiverse.com/thing:1612914 existed. Designed in Fusion360 after measuring with digital calipers and a few test prints/fits for dimensions. USE…
A bunch of Miata related masks, jigs, and fixtures. Useful for painting engines, valve covers, axles driveshafts, etc.. Also nice for keeping dust & debris out of engines and transmissions during rebuilds. Print Settings Printer Brand:…
Cam Seal Install Tool - Mazda MX-5 Miata BP for the Intake Cam Suits the Mazda MX5 BP 1.8 engine VVT intake cam (I have a separate tool for exhaust cam) Included both STL and OBJ versions of the same model. Simply start the seal on the…
I advice printing it in PETG or ABS. not sure how long PLA wil last or if it gets hot at all. hardware needed: 1x M6x1.0 40mm 3x M6x1.0 20mm 4x M6 nuts 9x M6 washers installation can be a bit tedious because you cant really acces the…
Note: Update/Edit follows description. Mazda's fantastic first-generation “NA” Miata (aka: MX-5, Eunos Roadster) has few glaring faults, but a big one for anyone that wants to enjoy both the wind in their hair and a beverage in their hand…
If you have ever removed your steering wheel for whatever reason, then you know how annoying and fragile this piece is.
Direct copy of a center console latch from a Pre-Facelift NB Mazda MX5. (NB1 1998-2000) tested with PETG at 0,2 and 100% Huge Thanks to the r/Miata community on reddit. now go fix your center console.
sunshade delete for miata with mazda logo
Mazda MX5 Miata Diff Axle Side Seal Tool Aids with a secure and straight install of the side/axle seals into the later NA and all NB generation differential (AKA diff that came with the 1.8 engines). Print with ~ 30% or more infill, 3 or…
The top attachment of the seatbelt is a steel and a large nut. This is not nice. Orginal there was a cover of black ABS. I lost one side and print a new on in red. I printed two because I changed the other side too. Printed in PETG, but I…
I was looking at the cupholder models on Printables for my '04 Miata and I liked the way one mounted but hated the way it would have to print and liked the simpler print and less filament needed for another one but hated the way it…
Designed these and have been running them on my track car for a few months now, glued on. Haven't had any issues other than getting called a ricer. Printed in PETG and spray painted with white enamel for extra protection
A fix for broken Miata NB center console latch, or a floppy console hinge because the plastic-hinge has cracked. The latch model should fit without any modifications to the console or lid. The hinge model replaces the metal and plastic…
Key Cover for my NA Miata spare key, model ilco. Designed with Miata flame logo and snap fit design. Print both STLs, Top and Bottom.
Mazda MX-5 Miata seat belt extenders for the NA/NB models.
Mazda Miata MX-5 NB keychain
Printable Miata swaybar blocks. If someone can confirm fitment, I printed these 2-3 years ago and people have been asking so I dug the files up but not 100% positive they're the last iteration or on fastener sizes. Test fitted to ‘99…
This is a recreated Mazda logo. The logo should be scaled properly. It is not a perfect recreation.
I needed go fast looking parts for the shitbox to impress the people at my meet. I printed one in ABS and it fits well in my car. It didnt get the attenion i wanted tho. 07/07/2025
Radio holder that has space for gauges or other accessories. Snaps into place.
30+ year old sun faded plastic cupholder broken? Retaining tabs snapped off like every one else? Here is an NA Miata OE Cupholder designed to replace broken or lost OEM Cupholder. Filament: For Best results: ASA Alternative: PETG…
This is a design that covers the sunvisor holes perfectly with the stock screws. it uses the "angel eye" type of led that are easily found on amazon by searching "12V 18mm led". (ex:…