Search results: milwaukee

Sort order

1,657 models

P
Printablesvikgr

Milwaukee M18 Battery Holder With Lock

Milwaukee M18 Battery Holder With Lock. So yit can be used inside van etc... Easy to print. Also I have created "short" version of this without lock to use inside workshop. https://www.prusaprinters.org/prints/53685 Print instructions…

Downloads
10,696
Likes
626
Rating
4.77
P
PrintablesMichaelK

Milwaukee M18 Battery Holder

Remix eines Batteriehalters für Milwaukee M18 Akku. Boden abgeflacht um mit PLA bessere Druckergebnisse zu erhalten

Downloads
10,216
Likes
944
Rating
4.74
P
PrintablesSean&Lucia

Milwaukee Packout Wall Mount

This is a remix of the wall mount on thingyverse. Converted from a single to a double mount to make life easer and not as frustrating. Increased to 6mm holes Made larger Screw Counter sink to accomodate decent screw to hold to wall…

Downloads
7,986
Likes
1,041
Rating
4.85
P
PrintablesFxhDesigns

Milwaukee Packout Crate

Need a little extra storage for nuts and bolts readily accessible? maybe a drink holder. versatile storage crate for Milwaukee packout system. Print at scale, supports may be needed along bottom of crate depending on printer. crate itself…

Downloads
6,508
Likes
1,006
Rating
5
P
PrintablesDan H

Milwaukee M18 Tool Holder

Printed .2-.26 layer height. I like to use 20% infill, could go more or less. Mounting holes made for #8 wood screws. Added an extended version for tools with the metal belt clips on them. Another extended version added with deeper…

Downloads
6,500
Likes
651
Rating
4.88
P
PrintablesThomllama

Milwaukee M12 Battery holder New- Version 5!

Note!** June 13 2022 Version 5 Released. ** - Increased spacing and set back to accommodate the Larger 3 amp and up battery sizes - Added single and 2 unit shelves if you don't have 3 - added profile and snugged fit for better hold and…

Downloads
6,451
Likes
732
Rating
4.98
P
PrintablesHtRabbit

Milwaukee Tool Holder

I designed this in freecad, it prints fine at 0.3 layer height 0.45 line width with a 0.4 mm nozzle. print with supports for the Grove

Downloads
6,250
Likes
396
Rating
4.77
P
Printablescrashkg

Milwaukee Packout Cleat (More Accurate)

I needed an accurate (tighter tolerance) cleat for the bottom of the Milwaukee Packout so I started from scratch and modeled my own.

Downloads
5,501
Likes
585
Rating
4.91
P
Printables460outdoorTig

Milwaukee M12 3 battery holder

Please drop a like if you want to see more of this kind of stuff:). I remixed this model with different tolerances to make sure the batteries stayed on the wall above my busy work bench and vibrations from the tools. 3 battery Holder for…

Downloads
5,488
Likes
566
Rating
4.9
P
PrintablesDan H

Milwaukee M12 Tool Holder

Organize your M12 Milwaukee tools with these mounts. Extended version for radio, but could be used with other tools if you need them sticking further off the wall. Printed in PLA, I like to use 3 walls and 20% cubic infill but they are…

Downloads
5,218
Likes
448
Rating
5
P
Printablesdavemoneysign

Milwaukee Packout Receiver

I was designing very specific Packout receiver to fit a toolbox and someone mentioned making a standalone universal receiver. This receiver can be used in pairs to hang a full Packout box or standalone to hold items that only have one…

Downloads
5,177
Likes
855
Rating
5
P
PrintablesChad Baker

Milwaukee Packout Compact Organizer - Router Insert + Blank Insert

See update notes below ↓ 1-8-2026 This is to store a Milwaukee router inside the Packout Compact Organizer box by Milwaukee. The parts bin could use a lid but I don't plan on having much else inside this area other than the vacuum shroud.…

Downloads
5,036
Likes
629
Rating
4.94
P
PrintablesChad Baker

Milwaukee Packout Compact Organizer Blank Insert

This is a blank insert I made when I created My Router Case for the Milwaukee Packout Compact Organizer. I have this shared as part of the files but I figured I would make it a seperate model. 3mf, stl, and step files included.

Downloads
4,582
Likes
473
Rating
5
P
Printablesoktane

Universal Cordless Drill/Driver Holder/Mount (Milwaukee, Makita, DeWalt, Bosch, Ryobi, Ridge, Festool)

Universal Cordless Impact Driver/Drill Holder A universal cordless Impact Driver/Drill Holder meant to organize your workbench as well as make it more ergonomic and easier to use. Front extrusion allows for it do double as a bottle…

Downloads
4,555
Likes
1,066
Rating
4.55
P
PrintablesBFBulletMagnet

M18 Milwaukee Battery Holder

printed at 30% or better for strength, best to use PETG or ABS if used in hotter spaces.

Downloads
4,494
Likes
482
Rating
4.92
P
Printablesdjcody

Milwaukee M18 Battery Holder Mount - No Supports Required

I wanted to store my M18 batteries mounted to the inside of a drawer with the tools they power and not dig to find one. Unlike other M18 mounts, this model keeps the battery secure simply through friction, the battery does not "click"…

Downloads
4,390
Likes
371
Rating
5
P
PrintablesYangorang

Power Tool & Battery Wall Control / Pegboard Mounts for Milwaukee M12

Straight and angled tool holders + a quad battery holder for mounting Milwaukee M12 system power tools on Wall Control or standard pegboard. I've made both a heavy-duty version with a 3rd leg for extra stability and a standard version…

Downloads
4,374
Likes
599
Rating
5
P
Printablesbiketiger

MILWAUKEE M18 BATTERY ADAPTER

Prints upright with no supports necessary. Two small supports designed into the model. (should pop right out) Adding wires and connectors is up to you. Designed around the M18 Red Lithium batteries that I have. Cannot confirm fitment for…

Downloads
3,783
Likes
428
Rating
5
P
PrintablesForeverwinter

Milwaukee Packout Base Cleat - Fusion 360 file included

Converted @Zer0sum's design into Fusion 360: Modified chamfers to better match Packout design Adjusted tolerances for a better fit Added mounting holes for #8 Screws Upsidedownified = ready for printing without supports Modify the .f3d…

Downloads
3,775
Likes
291
Rating
4.6

Milwaukee M18 Grinder Mount

This will securely hold an M18 grinder or oscillating tool and should work with most other brands as well. I recommend printing with four or so parameters for strength. No supports are necessary. The included holes are sized for #6 wood…

Downloads
3,547
Likes
452
Rating
5
P
PrintablesRM820119

Milwaukee M18/M12 Battery Charger Holder/Mount (Version 3)

UPDATE 08.03.24: Added a new version (Milwaukee Charge Mount 3 v8). Did some edits on the holes and beefed up the side brackets. This virtually eliminates any wobble. Also, rebuilt the small mounting tabs… better fit. To be honest, I use…

Downloads
3,354
Likes
420
Rating
5
P
Printablesmotocoder

Milwaukee Tool M18 Battery Holder with Snap-Lock

This model allows you to mount the M18 batteries for the Milwaukee tool system on or under a shelf, or on a wall. The batteries snap in using the same retention mechanism as they do on the tool. This lets you mount them where it's…

Downloads
3,254
Likes
253
Rating
4.75
P
PrintablesBenbenshow

milwaukee packout compact organiser case editable insert

its just a rough approximation of the inside of the Milwaukee Packout compact organiser case for you guys to edit for specific things you wish to put in it. I think i have seen something online but this is modeled by me and is far from…

Downloads
3,184
Likes
460
Rating
5

Milwaukee Packout Compact Organizer Internal Profile Blank

This is a CAD blank for the internal profile of the Compact Milwaukee Packout Organizer. I have supplied both the original fusion file and a .step file. Feel free to use it as a way to satisfy your endless urge to organize as as a kind of…

Downloads
3,149
Likes
469
Rating
5
P
PrintablesJustin

Milwaukee M18 battery adapter (Power Wheels upgrade)

Decided to make my own version of the M18 battery adapter. This is a bit more involved than some of the others on here. Its two pieces which can be printed without supports. It uses 5 M3 flat head screws and nuts to hold together. The two…

Downloads
3,102
Likes
299
Rating
5
P
PrintablesMartin_au

Milwaukee Battery Carrier

A battery carrier/tote for Milwaukee 18v batteries. It's stable and won't tip over even when fully loaded on one side. It also includes a quick connect wall mount. Uses a pair of 8g stitching screws like these -…

Downloads
3,049
Likes
609
Rating
4.82
P
Printablesjrmusan

Milwaukee string trimmer + Leaf blower mount

Couldn't find a decent mount for these so I made it myself. They are not perfect, but work great for me. Only caveat is being that these tools weren't designed with mounting in mind actually placing them on the mount is a little tricky.…

Downloads
3,000
Likes
418
Rating
4.85
P
Printablesjurij98

Milwaukee M18 Battery Holder for 4 Batteries

Milwaukee M18 Battery holder that you can use to mount 4 batteries. The initial holder design was created by https://www.printables.com/social/69337-vikgr/about . The design has space, so you can easily press the buttons on a battery to…

Downloads
2,896
Likes
283
Rating
5
P
PrintablesJayC

Milwaukee Packout Bracket For Rapid Chargers

This is a modified version of packout hangers from blahblahblahresearch. I wanted these to have the recess for the charger's base feet to be 90 degrees from the original design and far less tall so that the charger is more stable in the…

Downloads
2,847
Likes
404
Rating
5
P
Printableslkrueg

Milwaukee M18 leaf blower nozzle

nozzle for the Milwaukee 2724-20 M18 FUEL Blower there's one thicker one and one thinner one

Downloads
2,782
Likes
292
Rating
5
P
PrintablesJosh Laurie

Milwaukee Packout Feet (With Latch)

These feet allow you to attach anything you want onto your Milwaukee packout toolbox. Post-Printing To help the bolts thread through the parts easier, I drilled out the holes with a 6.5mm drill bit. How I Designed This I've decided to go…

Downloads
2,770
Likes
341
Rating
4.5
P
Printablesntressler7

Milwaukee M18 Battery Holder - Horizontal

This Milwaukee M18 battery holder mounts to the wall and positions the batteries horizontally at a slightly upward angle. This allows for the batteries to be stored closer together than the traditional vertical holders.

Downloads
2,711
Likes
341
Rating
5
P
Printablesmaxelman

Milwaukee Packout Label for 48-22-8435 (5 compartment deep organizer)

I've included a blank label and “Rotary Tool”. Easy to add text in a slicer - I used BambuStudio. I used raised text and printed on the face with supports. You could also print the text flush for a cleaner surface and no supports needed.…

Downloads
2,671
Likes
382
Rating
5
P
PrintablesGfölliBär

Milwaukee M12 Battery holder

I designed some Battery holder for my Milwaukee M12 battery to organized them. Printing: Printer: Mk3s+ Material: PLA/ PETG Infill: 15% Layers high: 0.3mm Note: The bigger Battery's (4-5) are not fitting in the 2Ah battery holder.

Downloads
2,669
Likes
340
Rating
4.88
P
PrintablesJoshed

PackUp Nesting Bin System for Milwaukee Packout Organizers 48-22-8430 and 48-22-8435

PackUp Labeled Nesting and Stackable Bins for Milwaukee Packout Organizer Models 48-22-8430 and 48-22-8435 A nesting divider bin system with customized labels for your Milwaukee Packout organizer. October 23rd 2025 Updates: Parametric…

Downloads
2,664
Likes
512
Rating
5
P
PrintablesUglylittlebush

Milwaukee M12 Battery cover replacement

My battery cover had fallen off due to abuse and machine coolant exposure, which degraded the original cover. This is a replacement cover for the Milwaukee M12 battery, this works for the small stubby type shown in the picture. It clips…

Downloads
2,598
Likes
309
Rating
4.75
P
PrintablesOasis6164

Milwaukee Packout Slim LOW-PROFILE COMPACT ORGANIZER Insert

Editable insert for the thinner, Low Profile organizer. The over all inside height should be 38mm.

Downloads
2,587
Likes
303
Rating
0
P
PrintablesRenba

Drill Dust Collector (Strong Self Holding !) for Bosch, Festool, Hilti, Makita, Milwaukee,...

Please as a simple return for the job... Like, Share, and Post your prints ! Thanks ! Optimized for printing vertically like a breez.. No supports needed ! ;) Original file fit on 35mm diameter tube (Festool, Bosch,…) Update 05 November…

Downloads
2,580
Likes
612
Rating
5
P
Printablesmaxelman

Milwaukee Drill/Driver Bit Packout Organization

You'll most likely want a mix of files for your exact needs. If you're using a 48-22-8436 5-Compartment Low-Profile Compact Packout , you can fix 3× Slim Long Bit Bins (or a mix of half-width bins) If you're using a larger 48-22-8431…

Downloads
2,576
Likes
508
Rating
5
P
Printablesmaxelman

Low-Profile Milwaukee Packout Handle Labels

These Packout low-profile organizer labels are inspired buy Dan Winciker’s Milwaukee Low Profile Packout Bit Set Label thing on Thingiverse. I have re-modeled the labels in openSCAD so that you can customize the text on the label and…

Downloads
2,524
Likes
369
Rating
5
P
PrintablesMark.coppola

Milwaukee Packout Rail bracket

This is a clean and simple Milwaukee Packout Rail bracket. It is probably the most cost affordable design out there as there are no addition screws, nuts, or extras to purchase. Print Instructions: Please print 1 at regular orientation…

Downloads
2,446
Likes
379
Rating
5
P
Printablestacokittah

Dividers for Milwaukee Packout Deep Bin

Dividers for stock factory Milwaukee Packout Deep Bins; divides bins into halves or quarters.

Downloads
2,400
Likes
379
Rating
4.5
P
PrintablesOverMaintained

Milwaukee Battery Wall Mounts (M12 & M18)

Mount your Milwaukee M12 or M18 Batteries cleanly to your wall! 2 of each file are available. “Non Locking” files will not retain the battery, better for shop or home storage where vibration and movement are not an issue, and easier to…

Downloads
2,387
Likes
296
Rating
4.78
P
Printablessteve457

Milwaukee M18 Stubby Nozzle - FUEL Blower Model 3017-20

This is a stubby nozzle for the Milwaukee M18 FUEL Blower. This nozzle is for the NEW blower model (3017-20) that Milwaukee just released in 2024. I couldn't find one available for this model yet, so made my own. I was able to get it to…

Downloads
2,313
Likes
209
Rating
5
P
PrintablesLoki-tactics

milwaukee m12 drill wall mount

M12 wall mount for drills. Keeps the drill close to the wall.

Downloads
2,266
Likes
317
Rating
5
P
Printablesmaxelman

Blank Insert for Milwaukee PACKOUT 5-Compartments Small Parts Organizer (48-22-8435)

Fits this case: https://www.milwaukeetool.com/Products/48-22-8435 https://www.homedepot.com/p/Milwaukee-PACKOUT-5-Compartments-Small-Parts-Organizer-48-22-8435/303005752 Make a custom organizer for your stuff!

Downloads
2,220
Likes
308
Rating
0

Milwaukee M18 Drill Mount / Holder

This will securely hold any drill type M18 tool, and should work with most other brands as well. I use these to store my M18 drills, impact wrench, and impact drivers. It even works with other tools that have a pistol grip, such as the…

Downloads
2,193
Likes
255
Rating
4.78
P
Printablesk4show

Milwaukee Packout Slim Low-Profile Compact Organizer Magnetic Bit Holders

Magnetic Bit holders for the trays that come with the Milwaukee slim low profile packout compact organizers. Uses 6x2mm magnets https://www.amazon.com/dp/B07KJ9H31P?psc=1&ref=ppx_yo2ov_dt_b_product_details Super glue the magnets on the…

Downloads
2,185
Likes
352
Rating
5
P
PrintablesSalut

Milwaukee battery holder angeld / Milwaukee Akkuhalter angewinkelt

Angled battery holder for Milwaukee. In 2 versions. Version 1 for screwing with wood screws or version 2 for hexagonal screws. Angewinkelter Akkuhalter für Milwaukee In 2 Versionen verfügbar, Version 1 zum festschrauben mittels…

Downloads
2,155
Likes
254
Rating
4.88
P
PrintablesMike Foged

Milwaukee M18 Battery Holder X3

I needed af holder for my M18 batteries in my van, and I wanted it to be easy to print. There is no click lock on the model, the battery is supposed to be held in place by friction mine is printet in ASA but works well vith PLA,PETG,ABS…

Downloads
2,111
Likes
163
Rating
4.75
P
PrintablesTuna

Milwaukee - Vacuum Dust Collector for Drilling

Drill holes without the mess! I had it print on the face that touches the wall with supports for 50 degrees.

Downloads
2,080
Likes
416
Rating
4.75
P
PrintablesDaniel Rossong

Milwaukee M18 tool holder

I couldn't find one I liked so I decided to design my own. I print these in PLA+, 0.28 layer height, 6 walls and 45% infill with a 0.6mm nozzle. Supports everywhere and they break off pretty easy and clean with the right settings. Maybe a…

Downloads
2,053
Likes
177
Rating
5
P
PrintablesCory M

Milwaukee Packout Level Holder

This is a level holder for the milwaukee packout. I designed this to fit a Milwaukee level, 4' and up. The width and height dimensions it is based off of is 1.4" x 2.75" plus 1mm clearance on all sides. (some levels have a 3" dimension…

Downloads
2,053
Likes
304
Rating
4.89
P
PrintablesKC

Milwaukee Tool Holders for Pegboard or Wall Control

I decided to clean up my tools. Started with wall control and then added more metal pegboards later. The pegboards I ended up with have smaller holes so I modified the anchors to suit mine, both are included. These will fit both pegboard…

Downloads
2,028
Likes
294
Rating
5
P
Printablespmirf

Milwaukee Packout 3-Drawer Bin

I printed these with a .8mm nozzle so they are pretty stout.

Downloads
1,948
Likes
474
Rating
5
P
PrintablesMitch

Milwaukee logo

2 piece milwaukee logo

Downloads
1,886
Likes
241
Rating
4.67

Milwaukee Packout Low Profile Organizer Compatible Containers and Dividers

EDIT: I designed the regular height organizer square bin as well. EDIT2: And the regular height rectangular bin. EDIT3: And I designed a divided regular height rectangular bin with removable dividers as well. EDIT4: Added center bins that…

Downloads
1,870
Likes
325
Rating
4.67
P
PrintablesFrank

Milwaukee Shockwave box holder

Milwaukee Shockwave box V 2 Added Chamfer to the ends V 3 Shortened the arms for a tighter fit V4 6 mm hole V5 6,1mm slotted holes for div pegboards

Downloads
1,856
Likes
475
Rating
5
P
PrintablesBendy

Milwaukee M18 Battery Storage

Remixed battery rack. Allows for printing vertically without supports.

Downloads
1,846
Likes
213
Rating
5
P
Printablesmaxelman

Milwaukee Rotary Tool Packout Organization Kit

Lots of files! You'll most likely want to print something similar to this: 1× Slim_Packout_Long_Cutout_Bin_for_Milwaukee_bit_holders (This goes on top) 1× Intermediate-Bin (This goes on the bottom) Various bit holders: 4×…

Downloads
1,836
Likes
453
Rating
4.67
P
PrintablesMuddledRemarks

Super Stubby Nozzle for Milwaukee M18 Fuel Blower

Designed a super short nozzle for my M18 Fuel blower to help with cleaning tasks around the shop. People also like these nozzles for drying their cars after washing. I printed at 1.5mm line width using a 0.8mm nozzle and 0.3mm layer…

Downloads
1,831
Likes
230
Rating
5
P
PrintablesWiseone

Battery Connector for Milwaukee M18 (Updated: 08/11/2023)

If you've ever wanted to make use of those Milwaukee M18 18V batteries, you are going to want a solid and clean way to get to the battery terminals. This 3D print provides a plastic plate assembly that slips onto the battery, snapping on…

Downloads
1,808
Likes
208
Rating
5
P
Printablesgiostealth

Milwaukee M18 Inflator Packout Conversion

Made this simple conversion to be able to keep the M18 Inflator stacked on a Milwaukee Packout. The rubber feet can be reused with an M4 heat set insert and a M4x10 screw. UPDATE 5/18/24: If anyone is interested in purchasing the print…

Downloads
1,789
Likes
243
Rating
5
P
PrintablesMikeVB

Milwaukee String Trimmer Mount

For handing your Milwaukee Quik-Lok string trimmer head. Print at .15-.2 mm and mount to wall.

Downloads
1,784
Likes
215
Rating
5
P
Printablescompassrose

Label for Milwaukee Packout 11-Bin Small Parts Organizer (48-22-8430)

EDIT: May 2025 These labels have worked pretty well for me but I'm kinda hamfisted and I've managed to break a couple of them so I decided to make a stronger, more rigid version. There's not much left of the original design at this point.…

Downloads
1,748
Likes
286
Rating
5
P
PrintablesToolsToMars

Milwaukee M12 Battery holder

I had trouble finding one of these files that would fit so i made this one on fusion. 2 regular wood screws to attach to plywood or a cabinet. Its not too tight so easy to get the battery in and out. Its meant to be used on a flat…

Downloads
1,711
Likes
154
Rating
4.27
P
PrintablesHackinistrator

milwaukee M12 impact bit holder model 2553-20

part bolts into existing belt clip mount (uses m2.5 bolt) no recommended to print in pla , it will shatter or deform . best printed with cf filled nylon or PC . no supports needed

Downloads
1,700
Likes
376
Rating
5
P
Printablescheeseprince

Milwaukee Packout Extension Cord Organizer

Cable/Cord management system for the Milwaukee Packout. This attaches to the following Packout Tool Boxes: Rolling Tool Box Large Tool Box Tool Box The image above shows a Carol Brand, Froghide Ultra Flex 50ft 12 gauge power cord. You can…

Downloads
1,693
Likes
343
Rating
4
P
PrintablesVincent

Milwaukee Square Wall Mount

Wall mount for Milwakuee 7 in. Rafter Square and 4-1/2 in. Trim Square Set

Downloads
1,693
Likes
412
Rating
4.9
P
PrintablesJoeBranch

Milwaukee Packout Wallmount Bracket

I have change a few details from Sean&Lucia model. All the fillet are now chamfers Added chamfer in the bottom corners to add strenght Added chamfer were the Packout sits for a better stability of the case in the bracket The top surface…

Downloads
1,689
Likes
312
Rating
5
P
PrintablesHarlan Johnson

Milwaukee Packout M18 Battery Holder

This is a holder for an M18 battery that will attach to the squares on the top of Milwaukee Packout equipment. I was looking for a file and the only one I could find was on Etsy, so I made my own. The fit on the battery is a bit tight if…

Downloads
1,687
Likes
193
Rating
4.6

Milwaukee Packout Organizer Compatible Center Bins

EDIT: I have designed 5 additional bins for the organizer center channel, and with those 5 bins - in addition to these three - you can configure the center channel with 5 different bin length combinations. The bins are for purchase in my…

Downloads
1,680
Likes
352
Rating
5
P
PrintablesBM Design

Milwaukee Blower Wall Mount (M18 FBL)

Wall mount for the Milwaukee M18 MBL18 Blower Inspired by https://www.printables.com/model/580193-milwaukee-m18-blower-wall-mount-2724 but did not fit the Blower Model i had. Other mounts in photos M18 Hedge Trimmer…

Downloads
1,647
Likes
112
Rating
5
P
PrintablesGordo

Gridfinity Milwaukee Packout Low Profile Compact Organizer Inserts

These are inserts Gridfinity organizer bins for: Milwaukee Packout Low Profile Organizer Milwaukee Packout Low Profile Compact Organizer 2025-10-08 Updates - Added new base plates that no longer require trimming and will fit in the Low…

Downloads
1,638
Likes
616
Rating
5
P
PrintablesKyu_u

Milwaukee m12 tool holder

Milwaukee m12 tool holder

Downloads
1,634
Likes
129
Rating
5
P
Printables10E Shoes

10E Milwaukee Packout Bit Organizers

Check out my YouTube for more creations: https://www.youtube.com/@EvanTennie I wanted to organize a large number of bits in my packout but the models I found were sometimes inconsistent with gripping the bits, needed additional hardware,…

Downloads
1,617
Likes
420
Rating
5
P
PrintablesRB Tools

Milwaukee M12 Battery holder

This holder is designed with a lower angle, to fit in a tighter space. So the battery will be pulled out more so than up. The print in picture is printed with Bambu PLA on a Bambu printer.

Downloads
1,610
Likes
175
Rating
5

Milwaukee Packout Low Profile Organizer Compatible Center Bins

EDIT: I have designed 5 additional bins for the organizer center channel, and with those 5 bins - in addition to these three - you can configure the center channel with 5 different bin length combinations. The bins are for purchase in my…

Downloads
1,587
Likes
355
Rating
5
P
PrintablesGreatOldOne

Milwaukee Tool Hangers

3 simple hangers for a Milwaukee Fuel 18V tools. No supports required. Tool Hanger V2 - good for the multi-tool Wider Tool Hanger - slightly wider version of the original V2 part, good for 115mm angle grinder Jigsaw hanger - good for the…

Downloads
1,583
Likes
348
Rating
5
P
PrintablesZUMA351

Milwaukee M12 Extended Battery Holder

I modified the Milwaukee M12 Battery Holder to fit the M12 extended batteries

Downloads
1,579
Likes
208
Rating
4.9

Milwaukee M18 BatteryHolder

Hi! Hier ist mein Batterie Halter für die großen Milwaukee M18 Akkus! Ich habe es mit PETG gedruckt und habe Supports zwischen den Schienen gedruckt (siehe Bilder) Ich habe die Version verbessert da noch ein kleiner Fehler sich…

Downloads
1,425
Likes
181
Rating
4
P
PrintablesSubtle3D

Milwaukee Fastback Compact Replacement Scales

Replacement sides for a Milwaukee Fastback Compact. Change the knife to a custom color or add a logo or text. For example, my buddy wanted one that said Makita! Print recommendations: Layer Height: 0.20mm Infill: 25% Cubic or Gyroid…

Downloads
1,410
Likes
549
Rating
5

Milwaukee M12 Lock In Battery Holder - The Original

The file is FREE, Please press the LIKE button. This is a holder for the Milwaukee M12 battery. The battery will lock in using the tabs on the battery. Mount these under a shelf and clip in your batteries for later use. Enjoy! 11/4/2025…

Downloads
1,374
Likes
133
Rating
5
P
Printablesmaxelman

Milwaukee M12 Inflator Wall Hook

Polymaker Matte PLA Filament 1.75mm Army Red is a good color match for Milwaukee Updated 1/20/24 - removed a small hole artifact from the middle. Thanks to @MatthewSlay for the heads up. Also added a STEP file

Downloads
1,354
Likes
241
Rating
5
P
Printablesbonzai000

Milwaukee M18 6 battery handle tote

Handy holder for up to six batteries. Protects the terminals from damage in a toolbox/bag, Handy way to get your tools to the project. Will print just fine in PLA, without supports. Enjoy Category: Tool Holders & Boxes

Downloads
1,352
Likes
189
Rating
4.83
P
PrintablesTuna

Milwaukee - M18 Tool Holder

I didn't like the looks of the other tool holders, I like the rounded edges. It works with the belt clip.

Downloads
1,319
Likes
148
Rating
5
P
PrintablesRobul

Multiboard Milwaukee M12 Battery Holder / Milwaukee M12 Akkuhalterung

Die Halterung für M12 Akkus von Milwaukee ist für die Nutzung mit dem Multiconnect System von @DavidD für Multiboard gedacht. Es gibt ein Modell für die kleinen und eines für die größeren Akkus. Beide Modelle sind so ausgelegt das sie…

Downloads
1,273
Likes
206
Rating
4.5
P
PrintablesMatthias

Dust extraction for Milwaukee angle grinder M18 FSAG

Designed to clip onto your existing disk guard. Stays in place with friction/clamping. Will fit most Milwaukee battery powered angle grinders (I use it on an M18 FSAG model). Keep in mind that even though my printed version has a strong…

Downloads
1,265
Likes
270
Rating
4.5
P
PrintablesEnckster

milwaukee packout insert 3/8 impact 43 pcs

made a insert for the slim packout 43pcs 3/8 impact set with a 1/2 to 3/8 icon reducer also with 1/2, 3/8, & ¼ impact drives from milwaukee it is tight fitting and made so the sockets don't move around. edit: made a v2 version i have yet…

Downloads
1,242
Likes
247
Rating
5
P
PrintablesHummeroid

Milwaukee M18 Tool Hanger

I have bought way too many Milwaukee tools to store by laying down, and that brought me to design this. I'm nowhere near the first to do this, but all others looked… not good enough for me to print. I've been printing these, along with…

Downloads
1,241
Likes
203
Rating
5
P
Printableshexvolt

Milwaukee Packout Dividers (Better than OEM)

UPDATE (Mar 3, 2025): Added a divider for the long bin of the Milwaukee Packout Low-Profile Organizer I wasn't satisfied with the existing models that I've tried for the Milwaukee Packout Low-Profile Organizer : some were too thick; some…

Downloads
1,235
Likes
177
Rating
5
P
PrintablesBenbenshow

Large Milwaukee Packout Box Inserts

It's self-descriptive. It's here for you to make your own inserts from, altering it however you wish or please. This is for the box with code 4932464082 It was slightly amended due to an implication in a comment that was deleted. Some…

Downloads
1,230
Likes
173
Rating
5
P
PrintablesZanfar

Milwaukee M12 Fuel Bit Holder

A 3-position, ¼″ hex bit holder for Milwaukee's M12 Fuel line of tools. Mounts using the stock clip mount--either in place of, or on the other side of, the stock clip. A right and left STL is provided to fit either side or the orientation…

Downloads
1,228
Likes
240
Rating
3.57
P
PrintablesMighty Big Car

Milwaukee Packout Compact Organizer Insert For M12 Stapler

It holds the stapler very snugly to keep it from rattling around. Even so, you might want to glue a thin layer of foam to the bottom of the stapler pocket. Configured for a stapler with the belt clip on the left side; if yours is on the…

Downloads
1,220
Likes
159
Rating
5
P
PrintablesBFBulletMagnet

M18 Milwaukee Tool Holder

Best to print in Petg or ABS unless kept in a climate controlled enviornment.

Downloads
1,220
Likes
138
Rating
4.8
P
Printablesdury4x4

Milwaukee battery holder

holder for Milwaukee battery

Downloads
1,212
Likes
247
Rating
5
P
PrintablesTinkeringRocks

Milwaukee M18 Leaf Blower Wall Mount

I really like this style of leaf blower, but it does not store well. I built a simple wall bracket to keep it off the ground and out of the way. Print instructions Category: Outdoor & Garden

Downloads
1,212
Likes
161
Rating
5
P
PrintablesMuddledRemarks

Super Stubby (SWEEPER) Nozzle for Milwaukee M18 Fuel Blower

Designed another super short nozzle for my M18 Fuel blower to help with cleaning tasks around the shop. This one has a sweep/broom/wide opening, especially useful for drying your car. I printed at 1.5mm line width using a 0.8mm nozzle and…

Downloads
1,208
Likes
143
Rating
5
P
Printablesvikgr

Milwaukee M18 Battery Holder "short" version

Milwaukee M18 Battery "short version". So it can be used inside workshop Easy to print. Also I have created version with "Lock" of this to use inside vans. https://www.prusaprinters.org/print/53684 Print instructions Unassociated tags:…

Downloads
1,204
Likes
66
Rating
5
P
Printablesmriv

Milwaukee M12 Modular Tool Mounts

Updated on 8/28/2024. Added additional models, added spacers to adjust for tool size, and made some recommended changes to the rotated mounts. These tool mounts are designed for Milwaukee M12 tools. They allow mounting single or multiple…

Downloads
1,187
Likes
182
Rating
4.83