Monopoly Geld und Karten Organizer
Karten und Geld Halter für Monopoly. Größe 224mm X 142mm
- Downloads
- 3,098
- Likes
- 1,561
- Rating
- 5
239 models
Karten und Geld Halter für Monopoly. Größe 224mm X 142mm
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********* Working off of a design by @Jeroen P, I've had to remix…
Original: https://www.thingiverse.com/thing:4757317
You can either use the step file (Move the lid 9mm down to contact the build plate) or the 3MF file to print with the logo in the correct position. Needs an MMU for multi-colour printing. I've added the STLs for the base, Inner cardholder…
A replacement house for a Monopoly game, modeled in Rhino. Prints of this model can be sold, as long as there is proper attribution.
Simple house and hotel for Monopoly. To replace all the pieces you'll need 32 houses and 12 hotels. Material: PLA, PTEG, etc Layer height: 0.1 mm Infill: 10% or less Supports and brim: None
Bring some extra drama to your Monopoly game with this 3D-printed mini jail cell! Instead of just placing your token “in jail”, you can actually lock it behind bars 😄 This model was designed to: Fit perfectly on a standard 44 × 44 mm…
This print holds Monopoly money vertically. It takes up way less space than any other way I've found, and it's easy to see and get to each denomination. Print instructions The walls are 0.8mm thick, which workes very well for 0.4mm…
Monopoly Money Tokens These tokens are designed to be used in place of the Monopoly paper money. PRINT INSTRUCTIONS The coins have 2 faces, for best results please keep prints oriented the same direction as they are in the files. You can…
Created this to hold money, property cards and houses/hotels for a standard monopoly game. There is a slot for each denomination as well as for each property group. It can also be used to store everything while not in play.
A replacement hotel for a Monopoly game, modeled in Rhino. Prints of this model can be sold, as long as there is proper attribution.
Hi, this is an easy print for the well known boardgame monopoly. The models are very small and detailed, so best to print with a resin printer. I have printed them just with the bottom of the models faced to the printbed surface. Have fun!
***These are NOT my designs*** however, I modified them a bit to better suit the monopoly board. Their current sizes print very well on a Prusa MK3S+ as well as other FDM printers however, they are a bit big for the general monopoly…
We owned an old Monopoly game with lost parts. We manage to design new parts. The design is from my 12 years old son.
These nest into each other to form a block that fits well under the cardboard insert in the box. 4 fit well in one box; I haven't tried more since we never have more than 4 people playing at once.
Are you a Monopoly Champion? Show it off by printing off this marvelous trophy! You can add to the plague to make it even more personable.
I saw the model for our Monopoly set but the design wasn't that good for printing. Therefore I made a easier model for printing (and better looking in my opinion). The set is put in 3 files, printable for all printers bigger than 18x18cm…
Its always so anoying when you lose one piece in a boardgame and you cant play it anymore. Thats why i made replace ment parts. So you can keep enjoing the games. Some pieces i made 2 varsions the filles with filled inn are less acurate…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** Have you ever wished playing Monopoly was less messy with your properties and…
Are you tired of searching for a Monopoly tray insert that actually fits the standard Monopoly set with its original cardboard inlay? After trying many designs, I couldn’t find one that worked with the dimensions of my Monopoly set.…
Car figurine for Monopoly Junior (version 1990)
If you are in need of more houses for your board games, or you lost some, then print more . These models are easy to print, and have a higher degree of detail . They are inspired from some reference ones I had lying around. Sprinkle a bit…
The version of Monopoly game that I have comes with a bank that doesn't work well so I decided to make a new one. Directions: Any layer height. This model isn't very detailed so .3mm is faster. To make it look better you can print the…
Simple storage box to hold a set of the Monopoly Deal card game. This is for cards that are 56x87mm in size. Fits all 110 cards as well as the instructions fold sheet. Features locking barbs so it doesn't fly open easily and has a big…
3D printed monopoly styled money for board games.
A case with a sliding lid to perfectly store your monopoly game and it serves as the banker's tray during the game. Some design features: Size: 185 x 185 x 44mm Organized bill slots : The tray includes grooves designed to keep the bills…
A box to hold cards for the game: Monopoly Deal Provided are a box and lid to hold the large deck of cards in Monopoly Deal. If you fold the instructions in half, they will also fit inside the box. I printed with 0.4 Nozzle in PLA @ 0.2…
My wife recently got a Jeep Willis, and now she's on the Ducks in the Jeep train… So I thought I would make a few custom ducks for here. Here is the next one to come out. Monopoly Duck. I printed this at 0.1 mm with 5% infill, 3…
-> Do you need a useful thing that sorts the Monopoly money for you? -> It has room for 7 different packs of notes. E.g. 1, 5, 10, 20, 50, 100, 500 as notes. -> Share their experiences, to this thing. Print Settings Printer: Ender 3 Pro…
A few 3D printable storage organizers/racks for the classic Monopoly board game. Category: 3D Printing
3 versions of a Monopoly house. 3 versions d'une maison de Monopoly.
Please click ❤LIKE❤ if you appreciate my work 😊 Bring your Monopoly board to life with this fresh, 3D-printed upgrade ! These models are designed to perfectly fit the classic Monopoly board , keeping the proper proportions and adding a…
A family member asked me to print some skyscraper figures to use with a Monopoly game. I drew one in Fusion, and I want you to have it too.
Easy to handle and stackable Monopoly money. Or I suppose it could be used for poker or anything other games. I printed the tray laying flat but I think it may print better standing up on its back with tree supports.
A simple box for the Monopoly deal cards. I printed it in PLA and the lid has a nice interference fit with the base. If its too tight, you can scale the lid by 1 or 2 %
The set is made as an upgrade for the standard monopoly game. It contains 4 game pieces along with 3 different types of houses and 6 different hotels. These are based on the buildings located in the city of Prague (Czech republic). The…
Monopoly Junior Organizer
.2mm nozzle PETG 10% infill 3 primeters supports on the edge of the lid
So... At first I just wanted to make a simple monopoly with more street groups and started to think about the best way to do it. I spent a long time thinking and planning etc. but then I had the idea of making the whole monopoly modular!…
Pictures printed with 0.8 nozzle.
it prints supportfree as of cura 75 deg overhang NO support only at this size 30mm Have fun PLEASE like it as you Download to get the students in the artschool free Filamentpoints CURA under experimental enable overhang and set it to 74…
I’m a huge fan of One Piece , and when a friend suggested creating a Monopoly based on the series, I immediately started brainstorming how to make it happen. I considered everything a Monopoly game needs: properties, money, figurines, and…
A smaller monopoly tray that securely hold on to the game items.
This is a mansion for Monopoly, It is a little bit bigger than a Monopoly hotel. Make sure to follow us so you get notified when we upload a new model! Don't forget to post your makes!
We got annoyed by the paper money, so I designed some pokerchip-like models and a stand for it. Print at 0.2mm Layerheight. First 3 Layers 1 color, last 2 layers for the text.
I made these kitten models as tokens for monopoly
Use pla to make this Skyscraper.
I printed in PLA
This custom-designed 3D printed box is made specifically for the Monopoly Deal card game. It is compact, easy to print, and built with a snug fit between the cover and bottom part to keep everything securely in place. The two parts slide…
This model set is great for decorations in a game room when you scale them up. You can also use them for the actual game of monopoly. They print really clean and I minimized the supports as much as possible. Depending on the size of the…
Spice up your game of Monopoly with an added house-rule: Buy your 1st Hotel + and then pay for the 2nd Hotel cost and you can upgrade to “Trump Tower”. Rent when other players fall on that property = 2x Hotel price. Only one Trump Tower…
It is the same great Monopoly Player Tray / Organizer by BuildX but the left tray for the properties cards is wider for the new wider properties cards.
We lost all but one of the cards for our Monopoly Electronic Banking game. I printed new cards for players 1 - 4. If anyone needs players 5 or 6 let me know and I can add those also.
Card box for the card game Monopoly Deal. I measured the deck of cards I had and set the dimensions as per that. Please scale as needed in case you have a different deck size. Print both pieces with the flat side down.
IMPORTANT; PLEASE READ: When printing, scale the print up 1.25x or else dice will not fit through the hole, if this will not fit your printer, slice it in half on the bottom edge of the bag and adjust from there.
I started out just printing out the fences for Jurassic Park Monopoly but couldn't stop there. I designed boxes for each of the different cards and a money holder, you know all stuff that should have been included with a $60 board game.…
An art deco organizer for monopoly money / properties. Can be printed as a single piece or multiple pieces for smaller printers.
Monopoly organizer tray/inlay except with Avengers logos and labeling - fun! Summary of features from my Monopoly model: The design is intended to be used during game play as well as packed up inside the box after play. Just take the tray…
This deed holder will hold all 28 deeds for monopoly and spin freely. It prints in two pieces with out supports.
A box that can fit 2 Monoploy Junior games. The inlay is the excact size of the box. For best print retract 1mm of both sides. Import both logo and the Lid at the same time in the slicer to add 2 colors. Or just leave the logo for an…
!!!!! MONOPOLYYYY EPIC !!!!! I made it on school project, comes with card plate and game board made by me.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** I created these models because a fellow GHOSTBUSTERS…
A model to organize the Monopoly: Harry Potter Edition 50 and 10 house points and house crests. Fits inside factory box. Four equal sized partitions for each size house point token. Happy gaming!
I designed this Money Box for my daughter after i played with her Monopoly Junior. She is so Happy with that so i'll Share it here maybe somebody is looking for that. Happy Printing 😉 i used Petg hopefully she can use it a long time.
Top hats and thimbles are so last century! Sometimes you just want to modernize old classics like Monopoly. Now you can with these 3D printed 3D printer player tokens. I included fan favorites, like the TAZ and Prusa, and some newcomers…
Ein organizer für das Holz Monopoly Spiel. Version 2 mit optimierten Fächern.
A small (close) model of my house, no supports needed. I Recommend Making it bigger.
Can be printed at an angle on 220 x 220 print beds I recommend manually adding some supports on the back of the model for stability I haven't tested the version for sleeved cards The one labeled for plain cards was the first version I did…
Simple piece organization that doubles for use in the box and to be able to give to each player during play. Chance/bank equally able to just be placed on board for a game, in box for storage. Print 4 of the token and meeple storage, one…
was asked to make them to relace lost pieces and thought id share :)
Project is still ongoing! At some point those flimsy Cardboard pieces will wear down or you already have lost them. In that case you can print replacements! Ill be updating the Collection over time. at the moment im testing and modeling…
Organize your money in the Monopoly game Easily prints at .28 mm layer in under 1 hour. Use mouse ear brim. Filament used: Anycubic marble white PLA. Enjoy! Consider sharing a make. → More game accessories. ←
The Junior Version of Monopoly comes with nothing and the chips, money and action cards will fly around. And even the dice will get lost at some day. In this box everything will find his place. Print instructions Will fit to the mini if…
Use this to make the cost of railroads even higher! I think you need to have all four railroads owned then you can put them down. I think the rent of this should be 400$, but you can make it something different.
Per chi avesse perso qualche pedina o volesse rigiocare con le pedine "storiche" del Monopoly
Really cool houses and mansions used for custom games or lost accessories. Custom made and could be used to throw at friends!
Monopoly house and hotel model with accurate dimensions according to https://www.monopolyland.com/monopoly-board-dimensions/ NOTE : Model on photo was scaled up to make it a usable toy
A series of containers designed to fit within and hold all the pieces for the Animal Crossing edition of monopoly. The 3 base plates snap together and all of the containers are stackable. The lids also snap into the base plates for easy…
The logo is cut in 0.35mm to provide 2 layers (0.2 and 0.15mm) of colour, before the remainder of the box is finished in the primary colour. Uses 4 colours (Red, White, Black and what ever colour you want the case in).
English (Translated with DeepL.com): Box for storing the small parts for the game Monopoly Junior. This box can be used to organize the bank during the game. The money remains in the compartments and is managed by the operator of the…
Rugged case for a single deck of Monopoly Deal. Bottom and top STL's are attached separately. Connect using spare bit of filament. Latch prints with top, also attached with filament.
Diese Münzen können gegen die Papp-Taler ausgetauscht werden ;-) Es sind folgende Werte verfügbar… 1/2 1 5 Viel Spaß mein Spielen!
Small organizer for your monopoly stuff
Design Concept The Monopoly 3D board game elevates the classic game to a new dimension with realistic miniature properties and vibrant colors. Purpose Enhance the traditional gaming experience by adding a three-dimensional aspect to the…
Monopoly Houses & Hotels – Simple, Clean FDM Prints A clean, easy-to-print set of Monopoly-style houses and hotels designed specifically for reliable FDM printing. These models are optimized for smooth surfaces, consistent detail, and…
Please click ❤LIKE❤ if you appreciate my work 😊 Give your Monopoly Super Electronic Banking game a brand-new dimension! Instead of abstract cards or tokens, now you can physically see your investments on the board. This set includes: 🏢 7…
We love Monopoly and the Electronic Banking Edition from 2007 was one our favorite editions. But the dog got to it. Yeah, that didn't go well. So I had to make a replacement and figured may as well get the whole set done and identified in…
I reconfigured cubedude76's original design so it would fit inside my 65th Anniversary Monopoly box. This design has the added benefit of requiring less filament to print. The major drawback of my version is it's large size. It is unable…
Found/made these to replace the cheap cardboard cut out coins that most games have nowadays. Consist of 4 coins 30mm x 3mm copper coin (10) 35mm x 3mm silver coin (20) 40mm x 3mm gold coin (50) 45mm x 3mm plat. coin (100) (These are a…
Extra house / hotel for the popular board game monopoly Note: These are NOT exact replicas of the original, they differ in size and design. The top / bottom holes do fit in the original tho.
Cupcake a Giftbox jako figurky do stolní hry Monopoly Junior Party.
We bought Monopoly Junior for our son. But the money and cards are loose in the box, it does not come with any form of container. So I decided to quickly draw something up. Printing is easy, no supports or brims needed, just print.
This is my recreation of the hotel from Monopoly Deluxe Edition. You can print these to replace lost original pieces or add more hotels to the base game!
Organize the game pieces to your Monopoly Discover game. The print in the photo is only 18mm tall. I increased the height of the tray to 25mm in the uploaded model since my tray wasn't quite tall enough.
Just a simple case for Monopoly Deal cards.