1963 corvair monza wall art silhouette
wall art silhouette model of the 1963 corvair monza. Adjustable size. I accept model suggestions or ideas of new models
- Downloads
- 47
- Likes
- 10
- Rating
- 5
48 models
wall art silhouette model of the 1963 corvair monza. Adjustable size. I accept model suggestions or ideas of new models
This is a faithful reproduction of the Autodromo Nazionale di Monza. Its dimensions are 20cm long, 10cm tall, 3mm thick and the track width is 5mm, but you can scale up or down any dimension to suit your needs. As it is a simple model, it…
Autodromo Nazionale di Monza Circuit, Monza, Italy, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts…
Have a good time printing it... Cheers! Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: NA Filament: NA NA Category: Automotive
Introducing the "Chevrolet Monza Classic 500 Car Shell" – a 3D printable replica for 1/28 scale RC cars. It captures the classic Chevrolet Monza Classic 500, offers customization, fits both FDM and resin 3D printers, and ensures a secure…
Italy Monza You can build a racing circuit in Monza using roads from the Racing Circuits - building kit . Here is a list of the parts and how many you will need: A1LRC - 1× A2LRC - 2× A3CLRC - 6× A3LRC - 10× B0ICRC - 10× B0SICRC - 1×…
LEGO Mercedes W196 Monza 1955
Fan de F1 j'ai voulu me faire un petit totem du circuit de Monza où je suis allé l'an dernier. Si le modèle plait je me lancerais dans les autres circuits de Formule 1. Imprimé en 2 couleurs en PLA sur ma Ender 3 V2 NEO en environ 2h30.…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu White This print uses 3 unique filaments Swap Instructions: Start with Black At layer #10 (0.88mm)…
This is a replica of the F1 circuit of Monza (Autodromo Nazionale Monza). You can download the frame to hold the model here . In case you want to make more circuit miniatures, you can find a grid for the frames to hang on the wall right…
3D model of the Monza race track One model is just the track, the second one is with the name of the track. width: 6mm height: 10mm
After trying out the gear published on thingiverse in the actual odometer, I've discovered that the little indentation that hooks to the number pin was not deep enough. The original has a deeper indentation compared to this model. So I…
Formula 1 Circuit Autodromo Nazionale Monza Italy with elevation and DRS detection zones. Can be printed as it is with 0.4mm nozzle or scaled to 120%.
I just wanted to make this for my shelf and thought I would share it. Inspired by https://www.printables.com/model/43781-f1-bahrain-track
Test your bedlever calibration printing this fantastic f1 track. Rotate, scale, change infill method first layer and test it. Have fun
Autodromo Nazionale Monza LED Lamp. Print base with 60% or more infill for the top part 80% or more is preferred to work as a diffuser if needed. Top can be printed with white filament I recommend doing it with clear filament to let light…
Let me introduce a perfect decoration for every Formula 1 fan . One of the quickest tracks in F1 calendar - Autodromo Natzionale Monza 🇮🇹 - just asks for some place on the shelf or desk. Model is divided into two parts. Thanks to it you…
Circuit de Monza formula 1 2025
Neon wall decoration for all fans of formula 1, especially the fastest tracks in the championship - the queen of speed. 😊 I had the opportunity to be in Monza this year, so I wanted to make an authentic decoration. This is the first…
MMU neded. Color: ⚫ circuit ⚪ numbers and "Autodromo di Monza" 🔴 sector 1 🔵 sector 2 🟡 sector 3 Put some glue before inserting the track in the holes of the base. 2 different version, one taller than the other. You can chose the best one…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black PLA+ Sunlu White PLA+ Sunlu Red This print uses 3 unique filaments Swap Instructions: Start with Black At layer #11 (0.96mm)…
Monzaemon Digimon Creature Model
Meshes designed by Amario57 http://www.thingiverse.com/Amario57/about Print Settings Printer: BFB IeC refurbished Resolution: 0.2 mm layer Notes: Printed with 4 ways Flux capacitor Category: Signs & Logos
Just print it without supports.
This is a small statue of the Autodromo Nazionale di Monza that is part of the F1 calendar. It is made up of two parts, one for the base and one for the track. You can print it in two separate colors if you would like Printing…
Ferrari Monza SP2 as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
Pallina di Natale con il circuito di Monza, Italia
This is a gingerbread cutout for the Monza F1 track. It is a bit simplified to work better but it still looks like monza. Printing instructions I would recommend printing it with the Monza text on the printbed. Other than that it doesn't…
For the most detail, the thinner the layer height the better. I print the base layers at 0.1 mm and the elevation at 0.05 mm. Monza does not have a lot of elevation change throught the track even with 3:1 elevation exageration.
Multicolored AC Monza logo, made for my kid who collects logo's. After he finished his “Eredivisie logo collection” he wanted a “Serie A logo collection” so here is one of the logo's. Print Instructions Print in 0.2mm layers, and change…
The Autodromo Nazionale Monza , built in 1922 and located near Milan, Italy, is known as the “Temple of Speed” due to its long straights. With a length of 5.793 km , it is one of the fastest tracks in Formula 1, where drivers spend about…
https://external-content.duckduckgo.com/iu/?u=https%3A%2F%2Ftse1.mm.bing.net%2Fth%3Fid%3DOIP.-7IGwqly2sHws8oYyyteVgHaHa%26pid%3DApi&f=1&ipt=382b8ef9296ec1d0f16006283fae4a4cecad9a95ffa3322779e227e85f2a59af&ipo=images You need some normal…
So this is a wall art I found, OG creator is linked. I did NOT make this, I just customized it.
This is a fantastic model of the Monza racetrack that I love to keep close to me while I play F1. This is part of a long collection I'm about to release, which will include all the 2026 racetracks, plus Imola and Portugal. Stay tuned,…
End piece for a puch monza frame. is used to keep the rear tray in place in the back of the frame. Print 2 as the pegs is offset to fit when flipped.
153.72mm long, 74.64mm wide, 10mm thick, track is 5.75mm wide.
Replacement center stand rubber bumpers for classic Puch mopeds (Maxi, MV, Monza). Available in 10mm, 15mm, and 20mm lengths to customize clearance. PUCH 050.1.2123 15mm fixed my clearance issues with the exhaust.
MMU neded. Color: ⚫ circuit ⚪ numbers and "Autodromo di Monza" 🔴 sector 1 🔵 sector 2 🟡 sector 3 Put some glue before inserting the track in the holes of the base. 2 different version, one taller than the other. You can chose the best one…
So this is a wall art I found, OG creator is linked. I did NOT make this, I just customized it.
The Autodromo Nazionale Monza , built in 1922 and located near Milan, Italy, is known as the “Temple of Speed” due to its long straights. With a length of 5.793 km , it is one of the fastest tracks in Formula 1, where drivers spend about…
3D printable topographic miniature of Monza - 🇮🇹 Italy Capture the beauty of Monza 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 45.582, 9.274 (LatLng) . It is…