Smurfette
Smurfette
Print approx. €5.01–€6.12 excl. taxPreliminary estimate for one variant
- Downloads
- 758
- Likes
- 101
- Rating
- 5
1,848 models
Smurfette
Print approx. €5.01–€6.12 excl. taxPreliminary estimate for one variant
Smurf, Smurfette, Papa Smurf Cokkie Cutters Stamps and Blades
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for one variant
Murti Mandapam
Print approx. €18.39–€22.47 excl. taxPreliminary estimate for one variant
Soporte simple y compacto para colocar una Samsung Galaxy Tab S6 Lite a muro. Debido a que son soportes de esquinas, puede ser usado en una gran variedad de modelos, aun asi, te dejo el archivo step para que puedas modificarlo segun…
Print approx. €1.11–€1.35 excl. taxPreliminary estimate for one variant
Check out my other Murder Drones designs → here ← --- Commercial Use --- By purchasing this design on Cults , you support my work and receive a commercial license to sell physical 3D prints of the model Click here to purchase the design…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
Most of the work was done by MZ4250 if you somehow dont know them allready check them out, they are a genius. Thank you for allowing remixes. Yes, I only made this because of a silly joke. If you love this design and want to see more fun…
Print approx. €3.39–€4.15 excl. taxPreliminary estimate for one variant
Reproduction fidèle de l'emblème du FC Barcelone, adaptée pour une Impression multicolore à couches variables (sans MMU) . Paramètres utilisés pour la fabrication du logo mural (gcode fourni) Périmètres 2 Couches solides Dessus : 5 /…
Print approx. €5.49–€6.71 excl. taxPreliminary estimate for one variant
Hello, smurf Karateka figure. Enjoy the print!
Print approx. €4.92–€6.01 excl. taxPreliminary estimate for one variant
(pour le français, voir plus bas) Wall support for 2 dometic remote controllers. Max remote controllers size is 56x18mm. Use two 4mm screws to fix the support. Settings Nozzle : 4mm Resolution : 0.2mm Infill : 15% Rafts : no Support : no…
Print approx. €4.43–€5.41 excl. taxPreliminary estimate for one variant
Este modelos esta formado por tres estancias, para el almacenamiento de artículos de oficina. Sin relleno. PLA.
Print approx. €14.76–€18.03 excl. taxPreliminary estimate for one variant
Sketches Check out my other Murder Drones designs → here ← --- Commercial Use --- By purchasing this design on Cults , you support my work and receive a commercial license to sell physical 3D prints of the model Click here to purchase the…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
Printing Time-Lapse Video ^^ Link here You can find more keychains in this collection Ready print Profiles for Bambu Printers on MakerWorld, link Below:…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
I am a Big Yugioh Fan and i wanted a special Deckbox for my Cards. So i printed myself one. The Box closes not bad but you have to clean a little bit around to make sure it closes and opens properly. The first Time when i closed the Box,…
Print approx. €17.39–€21.25 excl. taxPreliminary estimate for one variant
Art made in cooperation with _.xenort._ (profile on TikTok) Printing and Drawing Time-Lapse Video ^^ https://www.tiktok.com/@_.xenort._/video/7531859369512799510 You can find more keychains in this collection --- Commercial Use --- By…
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for one variant
WALL MOUNT FOR IKEA "LOTS" PRINT 4 PARTS FOR EACH MIRROR. USE 2 SCREWS FOR FASTENING. SUPPORTO DA PARETE PER IKEA "LOTS" STAMPARE 4 PARTI PER OGNI SPECCHIO. USARE 2 TASSELLI O VITI DA LEGNO PER IL FISSAGGIO.
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
C'est un support pour chargeur de batteries 18 volt de modèle DC18RC. Ce support ce fixe au mur grâce à 6 point de fixation pour vis de diamètre 4.5. Il est recommandé d'utiliser une attache de collier afin de le maintenir sur le support,…
Print approx. €3.00–€3.67 excl. taxPreliminary estimate for PETGSource material: PET
Support mural chargeur MiBoxer C4
Print approx. €6.14–€7.50 excl. taxPreliminary estimate for one variant
Remix of flioink's amazing samurai-inspired mask #3 (my personal favorite of them all). Teeth and mask are now separate parts to enable multicolor printing: Option 1 : Print separate parts, then use some CA glue to put all pieces…
Mini Samurai Decor . This time, I’m offering you a miniature Samurai figurine. You can freely enlarge or delicately reduce its size, while keeping in mind that to preserve all the details, maintain the layer height at 0.1mm-0.14mm . If…
This is a Remix of the awesome Samurai Mask Model 3 by flioink. I split the tooths and fangs so they can be printed in different colors on a regular printer. Just cut the imperfections with a knife on the teeth and mask to prevent a gap…
Best printed in 1 piece standing up Should fit standard beds
Get the 4 in 1 Bundle here: https://www.etsy.com/iliaspolitis3D/listing/1355739219/samurai-mask-stl-4-in-1-bundle
Samurai Warrior Figurine If you're interested in the commercial use of my models, check the link to my Patreon https://patreon.com/29flo All my photos are real and show an actual 3D-printed figure photographed by me. As always! The key to…
Print details: 0.4mm nozzle 0.2mm resolution Printed with supports for the tusks and teeth Filament: Amazon Basics Black PLA
it is very easy to nprint model.
Remix of flioink's amazing samurai-inspired mask #2. Teeth and mask are now separate parts to enable multicolor printing: Option 1 : Print separate parts, then use some CA glue to put all pieces together. Option 2 : Print the “Assembly -…
I made another samurai inspired mask. This one is a bit bigger so it should fit wider faces without any resizing. Since there are some thin areas, to keep it light, scaling down should be done only after you verify with you slicer. Had A…
if you like this kind of stuff consider supporting me on patreon.com/wekster
I designed a mask believed to have been worn by real samurai to ward off evil spirits according to their beliefs, while also intimidating their enemies. Note: I recommend printing it using your printer’s standard settings; this model…
Description Utilize the serenity of a samurai to hold your incense stick, creating a tranquil environment perfect for stress relief and wellness focused activities. Meticulously detailed, the model showcases a samurai figure with an…
Easy removal of supports, pay attention to the foot area. Frog samurai miniature with high details
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
! the model shown in the picture was painted ! Samurai Display Helmet for your shelf or setup! Easy assembly! Size: 15cm high 14,5cm wide 12,5cm deep The parts are ready for assembly and only need to be glued together. Connectors are…
Remix of flioink's amazing samurai-inspired mask #1. Teeth and mask are now separate parts to enable multicolor printing: Option 1 : Print separate parts, then use some CA glue to put all pieces together. Option 2 : Print the “Assembly -…
Halloween Bat / Murciélago Halloween
Reproduction fidèle de l'emblème du Real Madrid, adaptée pour une Impression multicolore à couches variables (sans MMU) . Paramètres utilisés pour la fabrication du logo mural (gcode fourni) Périmètres 2 Couches solides Dessus : 5 /…
Another mask I made for fun:) Print instructions It requires support on the build plate for the tusks, also supports inside the mouth are needed.
A friend of my son was going to cosplay Model N from Murder Drones. I got asked to print Model Ns cap badge. After some searching for references and Inkscape/OpenScad modeling, I have got a satisfactory model of the badge. Printed dual…
This model is a remix of Eplolako's model. I printed his and painted it (see photos) but it's printed horizontally on the bed from the middle up since he split the entire model down the middle. This causes a very noticeable loss of…
Use 608 bearings in the middle and print some cover handle things from other fidget spinners depending on preference. Also be careful as the corners are sharp and may be sanded down if you want to.
After the positive feedback on my first samurai mask I decided to make another one on the subject. The design is similar yet different enough that this one is much easier on support material use and is also faster to print. Print…
Sword stand for Japanese Katana. Holds a single sword. Printed with Proto-Pasta “Empire Strikes Metallic Black” HTPLA. Everything just snaps together, no glue or screws required. Tolerances are tight, so some very light sanding might be…
3D scan of Thigh Bone Scan - Femur (Right) Thanks to the Institute of Anatomy First Faculty of Medicine Charles University for the possibility to scan this model. A collection of high-quality, anatomically accurate 3D scans of human…
An ancient Japanese warrior in armor. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The…
A miniature resembling an ancient Japanese warrior. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round…
You can get a wire to attach the tail to the waist and might need a little drill to make a hole as the same size as the wire you use. You can do the same for the wire that is attached to the spike (I don't know the name of the thing ) to…
Smurf Cat. A request by a family member. I know zilch about this meme. So if its missing some details, and your in the know, let me know what it needs.
This is a print-in-place model with a hinged jaw that can open and close making Murray the perfect companion for the aspiring ventriloquist with a taste for world domination. Muahahahaha!!! You have the option of choosing between a…
I took a 3d scan from the scantheworld group and split it into 3 pieces so that it may fit on my printer. I then put pins in each piece so it fit nicely together and used some glue to keep it together. Here is the original source I got…
Same mask as original creator just easier to print. I figured I would upload these changes after struggling to print the teeth. I am sure I am not the only one. Split the teeth model into two pieces. Original had teeth floating in…
A mighty owl-man adventurer with natural stealth and night-vision. Collect them all! v 1.1 Updated feet to be stronger. Check out the FULL COLLECTION HERE: https://www.printables.com/@TripleGWorkshop/collections/2198626 Designed to print…
very easy, but nice, print! hope you'll enjoy it!
Bring the power of Japanese folklore to life with this Japanese Oni Mask . Inspired by traditional demon masks, this detailed model features sharp tusks, fierce eyes, and intricate ornamental patterns that make it a striking display piece…
I made this samurai right-handed. And fixed his pose to be more natural Print requires few supports.
Samurai - Shogun - wall art, easy to print
Hi Andrea aka Ghost219, I decide to have a crack at your request. I utilised a couple of PDO's found on the internet and created my own variant. I will where possible improve on him further as my skills improve ; ) Cheers Jace Print…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Enjoy my work? Find my full collection of work over on Patreon Or Show your support by buying me a coffee ! Per request, I created my Armored Samurai. Supports are needed.
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint “...and the forces of darkness will applaud me as I STRIDE through the gates of hell carrying…
Sada 5ks šmoulů udělejte si radost malými skřítky. Doporucuji smoulu s darkem seriznout zkriva. Nedrží rovnovahu I recommend that the bad luck with the gift be arranged crookedly. He doesn't keep his balance
Another logo with a twist Deep version - added some depth to the logo so it can stand up on a shelf etc. Was meant to be this from the beginning but I made it thinner so I could print it off faster. To change the colour your need to do a…
A sleek, modern samurai-inspired pen holder designed for both function and style. This kneeling warrior figure blends tactical aesthetics with practical desk utility, featuring a forward grip engineered to securely hold a standard pen…
Modified the original M9 models to resemble the Samurai Edge pistols from the Resident Evil games
smol absolute solver. i made it into a pin
Español:Porta Sahumerio inspirado en Pinterest La idea surge del negocio de Aromas de mi hermana Puedes encontrar los productos impresos en: https://instagram.com/makiaromasartesanales https://instagram.com/masuri_deco Ingles:Incense…
Schlaubi Schlumpf Brainy Smurf Glasses Holder If you like it --> press like it :-) Remix of this model https://www.thingiverse.com/thing:3058136 which was designed by Sangallo_Designs . Optimized the mouth, the surface that it is more…
The model is designed so the stick is in an angle so it doesn't touch the other hand. Printing tip: only the body needs supports, i printed with a 0.4 nozzle and 0.2 layer height.
Human knee. The model is created by conversion from CT scans, i.e. from DICOM files to stl file. Printing is necessary with supports, organic ones are recommended.…
From Vision to Volume: High-Detail Murugan 3D Sculpt Concept Digital Craftsmanship: Preparing the Golden Idol for 3D Modeling HD Reference Design for CNC & 3D Printing: Lord Murugan Precision and Piety: Designing the Ultimate 3D Idol
I separated the teeth in blender for us peasants without a multicolor printer. Printed on my Ender 3 V2 NEO.
This is a futuristic samurai robot figurine, perfect for collectors and sci-fi fans. Designed with a mix of traditional samurai armor and advanced mechanical elements. Stands in a battle-ready pose, holding a detailed katana. Can be used…
I present a full size replica of the pistol from cyberpunk 2077 with a lots of details. It has a detchable magazine attached to magnets All parts should fit in a regular 220x220 mm 3d printer Print Settings Printer Brand: Creality…
Scanned with my Revopoint Mini
Papa Smurf Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
🔎 Impression multicolore à couches variables (sans MMU) 🎨 4 couleurs, 3 changements Bleu Blanc Rouge Or 📏 180 mm
Wall mount clamp /bracket / holder for 2020 Alu Profile - Fissaggio a muro per profilo 2020 Update: 04/02/2025 added - Wall Mount Clamp for 2020 Alu Profile_Cover.stl Suitable for:…
This is a left human femur from a CT scan made available on Embodi3D (https://www.embodi3d.com/files/file/59865-femur/) by user “bazyar.” I segmented it with high detail in 3D Slicer and applied some edits in Meshmixer. To print, use your…
can be printed together or separately in other colours the Lamborghini is very realistic Print in place kit card , Assembly required need to use a support
Working Door Master Key from Murder Drones. There is a hole inside for an RFID card so you can use it with Arduino. In other files there is a pdf with the label for the floppy disk.
Apart from my 30 k years ago they knew how to 3D model and my fruit trap in a bottle, the sumarai I spent the most prior to todays modern 3D printers. Back then it was a husstle Category: Sculptures
minifig scale samurai armor (minifig not included)
Print with a ton of supports and a raft. Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here:…
El modelo representa un busto 3D de un samurái anciano con expresión serena y sabia. Lleva una armadura tradicional japonesa detalladamente esculpida, incluyendo un kabuto (casco) con grandes cuernos decorativos. Sostiene una katana con…
Reproduction fidèle de l'emblème de Manchester City FC, adaptée pour une Impression multicolore à couches variables (sans MMU) . Paramètres utilisés pour la fabrication du logo mural (gcode fourni) Périmètres 2 Couches solides Dessus : 5…
I DO NOT technically own the rights to the original character (Uzi in this case) and I took heavy inspiration on its animiniz model from glitch's shop, I only have the rights for the mesh model that I personally created. I ENCOURAGE…
My first upload! ;) Please leave some feedback / a comment (I don't have a paypal.me link, so anyone wanting to tip, please use my email address with paypal, "wiredkiwi-at-gmail-dot-com") This is "Gnash", a model of an older, warty,…
There are three models here. Two of them are just emblems. The other one is a keychain. If you want to print these in two different colours as I did in this render, and you don't have dual extruders and need to do a filament change, keep…
Wall mount car charger type 2. Fixation by four screws : 4 holes of 5 mm diameter. Please note that the shape of the socket takes into account the protective rubber of the type 2 socket. Like on the picture. The type 2 AC plug I have is…
J'ai vu un photo qui m'a donné l'idée. Modélisé et imprimé, je vous le partage maintenant.
Samurais mask made using blender, inspired by playing ghost of Tsushima, mask does not appear in the game and is custom design when printing this will be tiny in cura or any slicer really, scale accordingly: measure distance from bridge…