P
PrintablesRaphael Schaaf
Nerf Delta Muzzle
Muzzle for Nerf Barrel Attachements Print instructions Prints without supports
Print approx. €3.31–€4.05 excl. taxPreliminary estimate for one variant
- Downloads
- 401
- Likes
- 70
- Rating
- 4.88
Search results: muzzle
373 models
P
PrintablesSi1verEag1e
Literal Flaming Pig Muzzle device (airsoft)
A joke that I've spent too much time on: One of my airsoft teammates loves watching the hottest trends in the real “tacticool” shooting and considering the choice of a muzzle device, often kept repeating, that the best type ever is the…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 125
- Likes
- 24
- Rating
- 0
P
Printablesamish_rabbi
Aeon Pro w/ Pump Kit Muzzle Device
just a muzzle device I made to go on my aeon pro with the palmtop supply short kit. I havent tried it with any brass barrels or anything else aftermarket/modified. It fits in like the piece that comes wit the blaster and interfaces with…
Print approx. €4.28–€5.23 excl. taxPreliminary estimate for one variant
- Downloads
- 68
- Likes
- 11
- Rating
- 0
P
PrintablesJSchell1309
Muzzle Thread Protector - Threaded 1/2-28 - Various Lengths, Diameters, and Designs
Here is a small collection of thread protectors threaded 1/2-28 in multiple diameters and lengths. No post processing necessary, if your printer is calibrated and tuned well then these should thread on like butter. If they are a tight fit…
- Downloads
- 2,143
- Likes
- 93
- Rating
- 5
P
Printablespoolboy97
Harlot extended muzzle/grip
Extended/custom shaped barrel. No supports should be needed. Hope you enjoy. Included is the barrel latch, there was alot of play and lack of spring. Made latch catch a little thicker. I’ve uploaded my own version/custom form fit grip. It…
- Downloads
- 1,150
- Likes
- 46
- Rating
- 0
P
PrintablesAdditive Teknology
dog muzzle
My active dog usually breaks any myzzle in not more than a week. And it is hard to find appropriate size - usually she can`t open her mouth in any muzzle I could buy. Also some of them have poor ventilation, so dog gets hot too soon. So I…
- Downloads
- 854
- Likes
- 78
- Rating
- 4
P
PrintablesjonnieZG
M4 Flash Hider / Muzzle Brake (M4QD)
A replica of M4 muzzle brake (M4QD-type), designated for use with KAC QD suppressor replicas, but can also be used alone. The muzzle brake should be screwed onto the replica (CCW thread) so the windows are facing upwards. Use the enclosed…
- Downloads
- 743
- Likes
- 83
- Rating
- 5
P
Printablesmilspecmoehring
Barrett Style Muzzle Brake for 14mm CCW
Airsoft muzzle brake inspired by the distinctive muzzle device used on the infamous Barrett anti-material rifles. Attaches via M14LH threads. Print Settings i used: Printer: Prusa MK3S+ Prusament PLA 100% Infill 0.1mm Layer Height…
- Downloads
- 675
- Likes
- 67
- Rating
- 4.5
P
PrintablesTioh
Fursuit- or puppet-head base - version 66 - wolf - short muzzle
This is a head-base that can be used to build a puppet-, plushie-, robot- or a fursuit-head (costume). I did add some ventilation holes, that can also be used to attach fur. The lower jaw is movable. The ears are not included. Having…
- Downloads
- 670
- Likes
- 113
- Rating
- 5
P
PrintablesLeedle Dynamics
Hardware Free BCAR (For DZ Muzzles or 15mm OD Alu Barrel)
A bit of an experimental BCAR with agressive twisting for sticking inside DZ Muzzles or on the outside of 15MM OD aluminium tube
- Downloads
- 604
- Likes
- 133
- Rating
- 5
P
PrintablesThe Tinkering Catdad
Dragon Head Muzzle for Nerf
I made this as a one-off for a custom Caliburn U build. You can view that build here: https://www.youtube.com/watch?v=\_jwhx1dKqX8 Remixed this off an airsoft flash hider ( https://www.thingiverse.com/thing:1637128 ). Nothing major, just…
- Downloads
- 548
- Likes
- 59
- Rating
- 5
P
PrintablesDanB
Air Rifle Moderator / Muzzle Brake
This is a air rifle moderator / muzzle brake for .22 and .177 cal. Has ½ x 20 threads to thread on to the barrel.
- Downloads
- 541
- Likes
- 55
- Rating
- 0
P
PrintablesDZMH
Nob Human Muzzle
A new iteration of my muzzle designs collection, same base with some modifications First print the test rim to see if it fits you properly The model should fit tightly in an average head, scale to 110% to fit in a bigger head or to have a…
- Downloads
- 503
- Likes
- 47
- Rating
- 5
P
PrintablesDanB
Moderator/Muzzle Brake for T200 Air Arms air rifle
This is a combined moderator and muzzle brake for an Air Arms T200 .177 cal air rifle. This requires (1) 4-40 x ½ inch socket head cap screw. It reduces the muzzle blast noise but does not eliminate it. Muzzle blast is directed out the…
- Downloads
- 471
- Likes
- 44
- Rating
- 4
P
PrintablesGemeneye
Nerf Maverick N-Strike Barrel Attachment Muzzle
This is a Maverick N-Strike Barrel Attachment Muzzle, which, once installed, allows N-Strike Style barrels to be attached to the Maverick. It replaces the existing muzzle, which can be removed after the blaster is taken apart. This muzzle…
- Downloads
- 380
- Likes
- 40
- Rating
- 5
P
Printableseinos
Nerf detachable muzzle brake
Due to some overhangs do not exeed 0.2 mm layer height with 0.4 mm nozzle. With that layer height and nozzle the printing does not require any supports. For the muzzle break to ‘lock’ in place use a 6 mm airsoft pellet and place it in the…
- Downloads
- 378
- Likes
- 74
- Rating
- 5
P
PrintablesPeble
Venom Pro Muzzle Extension
The Venom Pro clearly wants to be an SMG… so I helped it out. This is not an original idea, Xfox Games sells a similar product (that is likely engineered better), and there are similar models elsewhere on Printables. However none of them…
- Downloads
- 370
- Likes
- 45
- Rating
- 5
P
PrintablesBrettcnc
Muzzle Brake for 12 Guage Slug Gun, (Shotgun)
Design Concept for muzzle brake for a 12 Guage Slug Gun. I am modifying a Savage 212 bolt action shotgun to look like a large caliber precision rifle… For no good reason.
- Downloads
- 366
- Likes
- 34
- Rating
- 0
P
Printablesthall72
Lego Compatible (57899b.dat) Minifig Gun Long Blaster with Muzzle
This model is compatible with the lego system.
- Downloads
- 363
- Likes
- 61
- Rating
- 0
P
PrintablesBreeki
Nerf Muzzle Brake
Simple muzzle brake for nerf blasters. Print it in orange unless you like to live dangerously. If you'd like you can buy me a coffee here: https://www.buymeacoffee.com/junrenman
- Downloads
- 361
- Likes
- 68
- Rating
- 4
P
PrintablesPlanetler
threaded airsoft muzzle brake/flash hider
Threaded flash hider, fits on 14mm ccw thread. Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Yes Resolution: 0,1 Infill: 50% Category: Sport & Outdoors
- Downloads
- 277
- Likes
- 44
- Rating
- 5
P
PrintablesRAM_46
Muzzle Break - M4 Airsoft
I use the image of the Precision Armament M4-72 Severe-Duty Compensator as a reference to make this model. The dimension is not the same of the real. The model has a thread M14x1,0mm left hand to connect to AEG Material: ABS Infill: 50%…
- Downloads
- 274
- Likes
- 24
- Rating
- 0
P
PrintablesFalkOnP
Bug-A-Salt Muzzle
Bug-A-Salt Muzzle M4 style “Flash Hider” Drop in replacement! Optimized for 3d printing standing up. My print settings: Layer Height: 0,2 Perimeters: 3 Solid Layers: 3 Infill: 25% Filament: NX2 PLA “PLA+” No supports
- Downloads
- 274
- Likes
- 37
- Rating
- 5
P
Printablesandz 0001
Saker ASR muzzle brake and suppressor combo (AK thread)
The suppressor goes over the muzzle brake . Thread on bottom of the muzzle brake is 14x1L , compatible with most AK style replicas , muzzle break - suppressor body joint is a M22 standard thread with 1.75mm clearance , suppressor-end cap…
- Downloads
- 256
- Likes
- 21
- Rating
- 0
P
PrintablesCit
Dog Muzzle, Maulkorb , tpu
Dogmuzzle could fit to your Molosser. Für das Gesetz wenn man mal einen Maulkorb braucht. Vermutlich nicht geeigent für den Hundekampf um die Ecke. For the law when you need a muzzle. Probably not suitable for the dog fight around the…
- Downloads
- 250
- Likes
- 21
- Rating
- 0
P
PrintablesBecker Thorne
Adventure Force Tactical Strike Nexus Pro Ultimate Dart Blaster, REPLACEMENT MUZZLE(S)
Attention: I keep seeing people selling these models on Esty and eBay: Digital files and actual prints. STOP THAT! I have already gone after a few of them and got them banned. I will pull these off here if this keeps happening. I put…
- Downloads
- 246
- Likes
- 61
- Rating
- 5
P
PrintablesJérémy Reeder
Muzzle Thread Protector
This screw-on sleeve is designed to protect the muzzle threads of certain firearm barrels when no muzzle device is installed. Its circumference is ribbed for grip so that it can be screwed on and off by hand. Supported thread specs are:…
- Downloads
- 237
- Likes
- 17
- Rating
- 5
P
Printablesjayz
1911 muzzle key
Little tool to assist with the disassembly of a 1911 handgun.
- Downloads
- 235
- Likes
- 32
- Rating
- 5
P
Printablescrt404
Nerf Muzzle
A Nerf muzzle extension. No inner section, as I didn't wanted to impede the nerf bullets. Category: Toy & Game Accessories
- Downloads
- 227
- Likes
- 54
- Rating
- 0
P
PrintablesChubbyEwok
Bug-A-Salt 3.0 Modded 3-side Picatinny Muzzle
Changes from the original model by 3d_bubbles on Thingiverse: This 3-rail Picatinny mount for the Bug-A-Salt 3.0 was almost perfect as-is, but I wanted to ensure things stayed in place with an additional angled extrusion if there's…
- Downloads
- 227
- Likes
- 28
- Rating
- 5
P
PrintablesAquilo
Airsoft muzzle brake
Muzzle brake inspired by XRK Kraken from MW2
- Downloads
- 226
- Likes
- 39
- Rating
- 0
P
Printablesthomers
Airsoft Muzzle Device
Muzzle brake for airsoft guns. Use the CAD files to adapt the barrel and bore diameter if necessary.
- Downloads
- 218
- Likes
- 40
- Rating
- 4
P
PrintablesMiata Head
HC Diana muzzle
Muzzle ring for HC Diana nerf blaster. Uses 4x M2x4mm countersink machine screws, as it was the only M2 I had on hand. 130 motor screws, which are M2x5mm should fit as well. So the choice isn't that bad, although it may not be as…
- Downloads
- 208
- Likes
- 14
- Rating
- 0
P
PrintablesLoneWolf052
Nerf Muzzle Cover
A simple Nerf muzzle attachment for standard N-Strike barell attachment points. It can be used to give the muzzle a different look and doubles as a lock for the Rapidstrike battery cover. Print Settings Supports: No Resolution: 0.2…
- Downloads
- 205
- Likes
- 75
- Rating
- 5
P
PrintablesCam Chaney
Salvimar Open Muzzle (Speargun Mod)
This is a muzzle modification I made to make my closed muzzle Salvimar speargun into an open muzzle speargun.
- Downloads
- 205
- Likes
- 15
- Rating
- 4
P
PrintablesWyrven
Square Muzzle Brake for Diana Brushless Blaster
2/12/2023: Added an alternative muzzle, 20mm longer and slightly fatter Requires 4 x M2 screws Shorter muzzle can be printed either vertically or horizontally, will still need some supports either way. The longer muzzle should be printed…
- Downloads
- 196
- Likes
- 18
- Rating
- 0
P
Printablesfoam.blasted
Cyber_Muzzle - Nerf N-Strike Barrel Attachment
Cyberpunk / Sci-Fi styled Muzzle for Nerf Barrel Attachment Points Two Parts No Supports Update: Since the inner barrel of Nerf Barrel Attachment points are built different over the years, i made a shorter inner barrel version and would…
- Downloads
- 194
- Likes
- 55
- Rating
- 0
P
PrintablesChris
Maulkorb Hund / Muzzle Dog
Erster Testdruck wurde mit PLA gemacht . Wurde mit Support gedruckt
- Downloads
- 193
- Likes
- 12
- Rating
- 0
P
PrintablesPlanetler
threaded airsoft muzzle brake/flash hider
another flash hider, fits on 14 mm thread. Threaded version aviable now (14 mm ccw)! Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Yes Resolution: 0,2 Infill: 20% should be enough Notes: Recommended layer height…
- Downloads
- 187
- Likes
- 16
- Rating
- 0
P
Printablesjustplanefun
Dart Zone Outlaw Extended Flat Muzzle Brake
A quick remix of Red Cowl's excellent extended muzzle for the Dart Zone Outlaw foam dart blaster, which incorporates either 3 or 4 vertical cuts to resemble a muzzle brake. Visual inspiration comes from the muzzle brake on the Desert…
- Downloads
- 184
- Likes
- 24
- Rating
- 5
P
PrintablesMisplacedMoose
21 bearing BCAR and muzzle brake for 16mm nerf barrels
Uses 21 F683ZZ 3x7x3mm Flanged Ball Bearing and 3x14mm pins
- Downloads
- 179
- Likes
- 40
- Rating
- 5
P
PrintablesEpicxxxx
Dartzone Threaded Muzzle extension
This has a threaded front end so you are able to use this with the “ex” bearing centering and rifling devices. It is important all of these parts are printed at a .12 layer height. The female threads do not like to print at higher layer…
- Downloads
- 175
- Likes
- 38
- Rating
- 5
P
PrintablesThe American Maker
.50 Caliber Muzzle Loader Sabot 2011 May 25
This is a sabot that is used for traditional hunting with black powder rifles. It creates a gas seal between the barrel of a muzzle loader and the bullet/Ball. Instructions Print it. Use it, or just show it off. Category: Other
- Downloads
- 175
- Likes
- 19
- Rating
- 5
P
PrintablespanKrasny
Muzzle thread protector 1/2x20 UNF
I recomend to print it at 0,1 layer height, using some better filament like PETG. If you need different dimensions/thread pitch, feel free to reach of to me. edit:I've added tiny bit of tolerance to ensure better experience
- Downloads
- 172
- Likes
- 7
- Rating
- 0
P
PrintablesTioh
Puppet-head base - version 66-3 - wolf - long muzzle
This is a wolf head base that can be used to build a puppet-, plushie-, or robot-head. If you want to build a costume or fursuit use: https://www.printables.com/model/95924-fursuit-or-puppet-head-base-version-66-wolf-short-/files
- Downloads
- 167
- Likes
- 14
- Rating
- 0
P
PrintablesKN16
T-Rex Muzzle Brake Cover
T-Rex skull that will fit over muzzle brakes with 13/16-16 outer threads. 0.2 resolution. PLA+ or better.. 6+ Walls. 100% infill. Tree supports off print bed. Use with care. Do not shoot your eye out.
- Downloads
- 164
- Likes
- 19
- Rating
- 5
P
PrintablesCask_tools
Nerf Disruptor blaster custom muzzle brake
Custom muzzle brake for Nerf Disruptor Blaster. You'll have to print with support and release a couple of screws to replace the orange genuine part by this one.
- Downloads
- 163
- Likes
- 26
- Rating
- 5
P
PrintablesCorvus
Threaded FOXBAT Muzzle System (screw barrel attachements directly onto the blaster)
Threaded FOXBAT Muzzle System SCAR, MEGA, MEGA XL muzzles or cosmetic muzzles just for the looks (screw barrel attachments directly onto the blaster) The Silly SCAR also fits and works with it if you use a 10" or 25,4cm aluminium barrel…
- Downloads
- 162
- Likes
- 44
- Rating
- 0
P
Printablesandroids102
German 88mm Gun Muzzle Break Pen Holder
Explosive pen holder.
- Downloads
- 162
- Likes
- 27
- Rating
- 5
P
PrintablesMAVERICK_CZ
AK muzzle brake Jmac 4C
copy of the Jmac Customs 4c compensator (not 1:1 copy) its in diameter 2mm bigger and the overall dimensions are from picture not mesured i tried to have the visual simularity its just for the looks XD the supports are insane for this…
- Downloads
- 161
- Likes
- 22
- Rating
- 0
P
PrintablesCit
Dog muzzle Maulkorb, Kurz Schnauzer.
In .stl umgewandelt und an die größe angepasst. 21 cm Umfang und 3 cm Nasenlänge ( Kurzschnauzer) Dog muzzle Nose 3 cm, dog muzzle circumference 21cm Filament Petg 100% Infill Tree Suport 5 Std 20 minuten druckzeit Habe einen weiteren…
- Downloads
- 158
- Likes
- 4
- Rating
- 5
P
PrintablesASH
Sidetrack- Ace of spades muzzle
Muzzle for Sidetrack inspired by Ace of spades hand cannon from Destiny. Print the Muzzle and shroud on the face vertically (as shown below). Use brims where necessary. Uses the same hardware as side track with an additional two m3x5 or…
- Downloads
- 155
- Likes
- 132
- Rating
- 0
P
PrintablesZafC
Hardware Free BCAR for DZ muzzles and 16mm barrels with alternate V rollers
Leedle's BCAR adapted to friction fit over 16mm barrels, and alternate V shaped rollers (same size and larger). Some models require 10% scaling -v2 has bits to better friction fit over barrels so you can forego tape
- Downloads
- 152
- Likes
- 21
- Rating
- 5
P
PrintablesMeinGonk
Nerf Gryphon Rifled Muzzle
UPDATES: 11/03/24 Added 41.5mm and 42mm Cages, .step updated 23/05/23 Fixed flywheel cover for 39.5mm Dual Stage cage 08/05/23 Added 39.5mm Dual Stage 28/04/23 Published This is my addition to the Gryphon platform, the rifled muzzle from…
- Downloads
- 149
- Likes
- 38
- Rating
- 5
P
Printablesmagu
Bug-a-salt 3.0 Muzzle Brake
Muzzle brake for the Bug-a-salt 3.0. For looks only. Friction-fits outside the orange barrel without affecting function.
- Downloads
- 145
- Likes
- 17
- Rating
- 0
P
PrintablesHinson
Muzzle Flash
Created this muzzle flash for a Fallout Power Armour print. Painting tips... To get the effect like the photo for this Model. Print in White. Paint Fluorescent Yellow roughly around base, and base of all spikes. Fluorescent Orange on…
- Downloads
- 141
- Likes
- 20
- Rating
- 0
P
PrintablesBrianchenito
"SPAM" Airsoft Non-Suppressing Muzzle Device
An airsoft muzzle device that covers up and protects either a barrel extension or a tracer unit. Does not reduce sound in any way, cannot be threaded onto real firearms, and is entirely dog friendly. Does not filter oil. Will, however,…
- Downloads
- 141
- Likes
- 44
- Rating
- 5
P
PrintablesCamikatze
Silencer with Muzzlebreak
Airsoftsilencer-/muzzlebreak combination. Theres no tread inside the muzzlebreak because it fits perfect on the shortend outherbarrel of my Airsoft-AUG. Print the Silencer with the Front on the buildplate and the muzzlebreake with the…
- Downloads
- 134
- Likes
- 23
- Rating
- 0
P
PrintablesSillybutts
Barrel Muzzle Collet for the TC, TCU, CB, and CBU
This is a set of muzzles for various blasters. They all use a collet and collet screw, like an Indra. NOTE : The U variant muzzles should be used with the SHORT VERSION of the muzzle nut. The threaded rod variants can use the short one or…
- Downloads
- 131
- Likes
- 12
- Rating
- 5
P
PrintablesSillybutts
Simple Orange Muzzle Tip Cover for Nerf Hobby Barrels (16mm OD metal barrels)
This is a simple muzzle cover for Nerf hobby barrels (16mmOD metal barrels) which adds an orange tip, and prevents core-sampling (injuries from being hit with the exposed end of a metal barrel). This muzzle does not affect the accuracy or…
- Downloads
- 129
- Likes
- 31
- Rating
- 5
P
PrintablesDZMH
Human Muzzle Round Style (V2)
Version 2 of the human muzzle round style, original design First print the test rim to see if it fits you properly The model should fit tightly in an average head, scale to 110% to fit in a bigger head or to have a loose fit and 135% to…
- Downloads
- 128
- Likes
- 23
- Rating
- 0
P
PrintablesMoxieMan
Venom Pro Muzzle Extension (With BCAR option)
Follow the printing instructions for the original model, with one exception - print at .16 layer height or .12 layer height for the threading. Use it with the hardware free BCAR located HERE . Or use one of these alternate tips in lieu of…
- Downloads
- 127
- Likes
- 21
- Rating
- 0
P
PrintablesKP design
Muzzle brake 14mm ccw
Muzzle brake 14mm ccw. (14mmx1) for airsoft.
- Downloads
- 126
- Likes
- 16
- Rating
- 0
P
Printablesthepaperskeleton
Nerf Challenger and Mirage Muzzles
Nerf Rival Challenger offers a new Rival Muzzle Lug. These muzzles press fit on and twist into place. Options are shown in photo: 1. Long Skinny SMG Crown (2" diameter (50mm) x 6.5" long (163mm)) 2. Short Skinny SMG Crown (2" diameter…
- Downloads
- 125
- Likes
- 43
- Rating
- 5
P
PrintablesMike
Modified Muzzle for elastic string
This Modified muzzle gives you the option of attaching your elastic string to a more power efficient location. This improves the following: - Higher velocity of projectile because string is more in-line with barrel (less diagonally…
- Downloads
- 122
- Likes
- 73
- Rating
- 0
P
PrintablesSillybutts
Deuce Pro Parts: Pump Action, SCAR Muzzles, Spring Spacer.
This is a collection of mods I made for the Dart Zone Deuce Pro! Each one of these mods is independent from the rest, but they can all be used together. (aka, you don't NEED to use all of these mods. You can pick and choose.) 25mm Spacer…
- Downloads
- 122
- Likes
- 50
- Rating
- 5
P
PrintablesMaraktos
Airsoft muzzle brake cal50 ,L96 mb01 silencer
Barrett cal .50 rifle muzzle brake for L96 WELL MB01 airsoft guns. I recommend printing from PETG. The thread is P M24X1.5 This is only an imitation for an airsoft gun
- Downloads
- 122
- Likes
- 16
- Rating
- 0
P
Printablesitsthatguy
gel blaster gun supressor/muzzle/silencer
i was searching for a supressor/muzzle for my gel blaster, but i didnt find it so i designed my own. printer: Bambulab p1s infill: at least 10% support: on
- Downloads
- 121
- Likes
- 10
- Rating
- 0
P
PrintablesTylerDanger
Longer Nerf Muzzle
Imported from Thingiverse sorry for the old links. They haven't been moved to Printables yet. Mods in the photo but not my models: Stock: https://www.thingiverse.com/thing:2950707 Flashlight: https://www.thingiverse.com/thing:5016873…
- Downloads
- 119
- Likes
- 22
- Rating
- 5
P
PrintablesKptnAutismus
Sillybutts Breacher Star Wars inpired barrel shroud and muzzle
features an open and closed version, in case you're concerned for darts hitting the shroud from the inside
- Downloads
- 118
- Likes
- 42
- Rating
- 5
P
Printables43D PRINT
M4 AR muzzle flash hider
M4 AR muzzle flash hider left or right M14x1 thread Print settings 0,1mm layer 6 walls 50% infill organic tree supports (25°threshold angle)
- Downloads
- 118
- Likes
- 13
- Rating
- 0
P
PrintablesAndrew Nelson
14MM Airsoft Muzzle Device Timing System (Shims)
14MM Airsoft Muzzle Device Timing System (Shims) These shims are printed and used to tighten muzzle devices (flash break, suppressor, tracer unit, etc) on 14MM Airsoft barrels to specific orientations. The shim(s) should fit between the…
- Downloads
- 118
- Likes
- 13
- Rating
- 0
P
PrintablesMaverick0197
Elite Force HK MP7 A1 AEG - Tracer Muzzle Break
Muzzle break designed for the new (2019) H&K MP7 AEG. This version is designed to work with the ACETECH Lighter S tracer unit. I have included the barrel adapter I made to mount the tracer as well as the cover I printed for the tracer.…
- Downloads
- 115
- Likes
- 16
- Rating
- 0
P
PrintablesDustin (Dirty D)
MK.II Nerf Muzzle
FLING FOAM IN STYLE AND REP YOUR FAVORITE NERFSMITH WHILE DOING IT!!!
- Downloads
- 114
- Likes
- 36
- Rating
- 4
P
PrintablesCrooksUSA
Crosman 2100B Air Rifle Moderator / Muzzle Brake
I liked the Moderator/Muzzle break from Dan , but the threads would snap off anytime I would pump my Crosman 2100B air rifle, so instead of just relying on the threaded part to hold a moderator on, I added a shrouded portion to snugly…
- Downloads
- 110
- Likes
- 13
- Rating
- 0
P
PrintablesMaverick0197
G&G CM16 - Muzzle Break
Muzzle Break designed to match the aesthetic of the G&G CM16.
- Downloads
- 107
- Likes
- 21
- Rating
- 0
P
PrintablesDesertFare
ZEZTZ helmet and Booster muzzle
A file for the Kamen Rider ZEZTZ helmet used in his main 10 forms, and the Plasma/Booster forms as well, The files included are both resin and solid style eyes, as well as a version of the ZEZTZ face with cutouts for the 'Booster Muzzle'…
- Downloads
- 106
- Likes
- 12
- Rating
- 5
P
PrintablesMZ72
FDM printable low friction rifling NERF muzzle
Materials needed: M3x4 set screws x2 M3x2 set screw x1 Description: I used to consider printed rifling a difficult, even impossible(if you pursue a good effect) task for FDM because of layer lines. So I made quite many SCARs out of low…
- Downloads
- 106
- Likes
- 11
- Rating
- 5
P
PrintablesDZMH
Human Muzzle Box Style (V2)
Version 2 of the human muzzle box style, original design First print the test rim to see if it fits you properly The model should fit tightly in an average head, scale to 110% to fit in a bigger head or to have a loose fit and 135% to fit…
- Downloads
- 104
- Likes
- 20
- Rating
- 0
P
PrintablesPteppic
Nerf Longshot Muzzle Brake
This is a barrel shroud and muzzle brake for a Nerf blaster, specifically the Longshot main gun. The shroud is designed to fit around a 318mm long, 16mm OD barrel (worker longshot kit) and inside the front locking lug of the blaster. The…
- Downloads
- 102
- Likes
- 27
- Rating
- 0
P
PrintablesMaverick0197
Elite Force HK MP7 A1 AEG - Muzzle Break/Battery Expansion
Muzzle break designed for the new (2019) H&K MP7 AEG. Increases the length of battery that can fit in the gun. Fits flush with top rail riser or has a matching rear riser. Top rail riser split into three pieces for easier printing.…
- Downloads
- 101
- Likes
- 15
- Rating
- 0
P
Printableswtxmetriod
VFC MP5 muzzle replacement
Replaces the barrel AND muzzle of a VFC Mp5. There is space for an o-ring at the base of the 14mm threads, to prevent muzzle devices from binding. .2mm or better LH recommended for muzzle The 11mm barrel spacer must be printed at very…
- Downloads
- 97
- Likes
- 16
- Rating
- 0
P
PrintablesPublic username (required)
Angled Picatinny (1.5 degrees) for long shots with low muzzle velocity (e.g. foam dart blaster)
Update: 8 slot rail is now filled. ----------- Scope can't depress far enough? Use 1.5 degree down angled rail. My Zius BK-1S throws darts at 50 m/s (165 fps). At 10 meter range (33 feet) I experienced 20 cm (8 in) freefall drop, which is…
- Downloads
- 95
- Likes
- 19
- Rating
- 5
P
PrintablesSaniainen
Ase Utra style QD muzzle devises
Muzzle devise spotted on Sako's AR10 and AR15 rifles: -Birdcage flash hider for airsoft 14mm ccw threads -thread protector "crown" -QD silencer with two can lengths, overall length is 150 and 200mm, diameter is 43.5mm -Baffle key is…
- Downloads
- 94
- Likes
- 15
- Rating
- 0
P
PrintablesCorvus
Printed grub screw - for the Corsair blaster (replaces muzzle and grip pins!)
Printed grub screw for the Corsair blaster by LeedleDynamics These printed grub screws replace the muzzle pins and the grip pin. Screw them in with a small flat-head screwdriver. Print 3 of them and screw them in the pin holes until they…
- Downloads
- 88
- Likes
- 22
- Rating
- 5
P
PrintablesPlanetler
threaded airsoft muzzle brake/flash hider for MP7
Custom flash hider for HK/Well MP7 :) Rails: https://www.thingiverse.com/thing:2837495 Stock: https://www.thingiverse.com/thing:2822468 Speedplate: https://www.thingiverse.com/thing:2837536 Print Settings Printer: CTC Bizer Dual Rafts:…
- Downloads
- 87
- Likes
- 11
- Rating
- 0
P
PrintablesPlanetler
airsoft muzzle brake/flash hider
another flash hider, fits on 14mm thread. Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20% should be enough Category: Sport & Outdoors
- Downloads
- 87
- Likes
- 22
- Rating
- 0
P
PrintablesSillybutts
Freerunner V2 - Extended Muzzle / Front End with picatinny mount for foregrips.
---------------------------------------------------------------------------------------- Description ---------------------------------------------------------------------------------------- This is an extended muzzle/front end for the…
- Downloads
- 87
- Likes
- 31
- Rating
- 5
P
Printablesfoam.blasted
Nerf Barricade Flywheel Cages and Muzzle
Flywheel Cages for the Nerf Barricade to be able to fire Elite Darts with stock motors. Available in different crush variants. Cut Outs on the Back Shell of the flywheel Cage need to be made larger. I also added a replacement Muzzle.
- Downloads
- 87
- Likes
- 19
- Rating
- 5
P
Printablesblasterface
GF Basic Rifled Muzzle
Simple rifled muzzle device (commonly called a SCAR or PCAR) designed for the Game Face Trion. This threads onto the barrel lug and replaces the stock muzzle device. Files provided as-is with no warranty express or implied. Use at your…
- Downloads
- 87
- Likes
- 8
- Rating
- 0
P
PrintablesDom's 3d Print Shop
Muzzle Cup for Sillyshells
V2 VERSION OUT NOW! Introduction Inspired by muzzle mounted rifle grenade launchers and wondering why Sillybutts didn't design one i have made a muzzle mounted holder for Sillyshells that uses the collet sytem of Silly's Spigot SCAR and…
- Downloads
- 87
- Likes
- 32
- Rating
- 5
P
PrintablesB4by_dR1v3R
Airsoft AKM+Nato muzzle device
Modified an A2 birdcage model I had into an AKM style muzzle so that I could mount an ASG B&T Rotex replica onto an AK-105 without having to use a birdcage style which looks a bit too much like a Draco. Just an AKM muzzle with a NATO QD…
- Downloads
- 87
- Likes
- 5
- Rating
- 0
P
PrintablesCake
Dart Zone/Adventure force Matrixfire Muzzle Delete
Cut down your MatrixFire for a more compact form factor! Can be used with either the hopper or the magazine adaptor. Update 27Dec2022: Cleaned up tolerances. Added Nightingale style brake. Added detailing Added Brake that actually makes…
- Downloads
- 86
- Likes
- 24
- Rating
- 0
P
PrintablesB4by_dR1v3R
Airsoft YHM Phantom QD Muzzle Device Replica
This is a replica of Yankee Hill Machine's Phantom QD muzzle device, extremely close to the original except from the outside thread, and this is just so that it's compatible with my Turbo T2 suppressor replica. (Here:…
- Downloads
- 84
- Likes
- 15
- Rating
- 0
P
PrintablesJoebee
King Tiger Muzzle Brake-Full Size
King Tiger Full Scale Muzzle Brake for the 8.8 cm KwK 43 L/71 gun. Modeled with rear barrel attachment threads, locking/anti-rotation details. This is quite large and may need to be split into a few sections to 3D print depending on your…
- Downloads
- 82
- Likes
- 4
- Rating
- 0
P
PrintablesZafC
Variable Hardware Free BCAR for 16mm barrels or DZ muzzles
Entirely printable BCAR with various options for rollers and angles. 5 ,6 ,7 ,8 ,10 ,12 , 15 degree options and more Flat, rounded, or V shaped rollers Additional crush by aligning the shroud to press rollers in. Make sure the rollers can…
- Downloads
- 81
- Likes
- 19
- Rating
- 5
P
PrintablesJoey C
Nerf Muzzle for Rival Challenger
Here is my take on a Rival muzzle for the Challenger. It also fits on my Sillybutts Nerf Rival muzzle adapter: https://www.printables.com/model/1135814-rival-barrel-mount-muzzle-for-sillybutts-battle-ax
- Downloads
- 80
- Likes
- 12
- Rating
- 5