olight stand -new
Stand for new USB magnetic charger with 22.5 mm diameter
- Downloads
- 946
- Likes
- 155
- Rating
- 4.89
354 models
Stand for new USB magnetic charger with 22.5 mm diameter
This 1x1 Gridfinity bin allows you to store and charge your Olight flashlights. Any standard Olight magnetic charger should fit, it's intentionally a tight fit to keep the charger stable. I added a though hole to the charger for easier…
I made this model without knowing that there is a “olight L-dock kit” on the market. :) https://www.amazon.ca/OLIGHT-Dock-Works-Seeker-Compatible/dp/B07QWSDRZD myine is nicer because the charger is integrated….and cheaper dual version…
Additionally needed: 1x M3x26 screw, 1x M3 nut, 2x cable tie Feed the cable ties through the holes (as shown) and fasten them around the Olight. In the files section, you can also find models for 25,4mm (1") and 30mm flashlights.
This is a handy dandy light diffuser which fits an OLight Baton II or Baton 3 flashlight. When in it's stored position, it also has the added advantage of putting some distance between the magnet on the bottom of your flashlight and coins…
Olight charging/storage base. Compatible with Gridfinity Sizes 1x1 1x2 1x3 1x4 1x5
A simple Picatinny / NATO rail adapter meant to hold an Olight Arkfeld Pro flashlight and green-laser. Absolutely not intended for duty/precision use – I threw this together just to be goofy by attaching a light and laser to a…
This is a flashlight holder to go onto most normal belts. it is designed to accommodate OLIGHT Warrior 3S type flashlights with metal clips attached.* There is a feature that works with this type of flashlight - put the light into the…
A cheap alternative to the discontinued Olight omino dock. You use your own magnetic chargers to make a 4 port charger. Any cheap 4 port usb-a charger will work for this: USB Charger Cube, Wall Charger Plug, AILKIN 4.8A 4-Muti Port USB…
Remix of https://www.thingiverse.com/thing:5441443 Light mount for the Magicshine / Olight mini-garmin style mounts. The stock mounts do not allow for mounting to the back of a rack, this is designed around 50mm rack hole spacing.…
Olight Baton 3 pro dual Flashlight holder (front indicator)..just that
Olight Baton 3 pro single Flashlight holder (front indicator)
This is a Gridfinity 1x1 base to hold the Olight MCC 1A charger. There are 2 versions, one with the crown and could be stacked on top when not used. The other is crownless to accommodate larger lights. I did use the geometry from Aaron's…
A stand to store a G17 with an Olight PL Mini on your desk. Print the optional insert so it fits without the PL Mini attached.
This is a flashlight diffuse for Olight baton 3 flashlights, it locks in place, prints whiteout supports.
Stand for Olight USB magnetic charger with 21 mm diameter and 7mm high. Print upside down for best results Althron's Olight Stand -New looks great but didn't fit the size chargers i have so i tweaked the dimensions a little.
Wanted to charge my Olight Baton 3 and Seeker 3 Pro on my Ikea Skadis so I remixed it. I fixed the magnetic charging port with hot glue. Supports are necessary.
Hex-Lampshade for Olight Obulb/MC/PRO hexlamp_small for Olight Obulb/MC hexlamp for Olight Pro print it with a 0.4 nozzle. Simply put it on the olight obulb. If you like my model, I would be very happy about a Like. I would also be…
Just a simple cap to protect your Olight Marauder Mini lens while not in use. As stated in one Make it should also fit the Marauder Mini 2! Printed with PLA with a 0,4mm Nozzle and the 0,3mm Draft Preset in PrusaSlizer2.5.0. Fits snug and…
Microlight 3.2 Very light and rigid print head for a V-Core 3 printer. The top plate and front plate are now printed as a single item. There are several other small detail changes. The integrated top/front plate offers several advantages…
Heavily inspired by this model https://www.printables.com/model/237142-olight-baton-3-holster by @mac190, for the Baton 3. I made my model to fit the slightly different button of the Baton 4, and with a belt loop that is a little wider to…
this is a charging dock for the olight marauder mini flashlight it is designed to use the magnetic charging cable included with the flashlight there are two files one is the charging dock and the second is an optional stand for the dock…
The Oclip Pro is one brilliant EDC torch, but it's keyring attachment location is too fiddly to use. This is a mounting clip that attaches to a keyring, and that perfectly mates with the Oclip Pro's strong rear spring clip. It clips in…
Olight pressure pad mlok mount for Odin S pressure pad. Separate head and tail caps to mount your pressure pad to an mlok platform. Recommend printing PETG with 50% infill to get full strength of the caps. Last photo includes my Olight…
Hello all, I sketched this model up for myself and wanted to share it with the community! I wanted a good way to carry around some AAAs with my i3T without having a seperate batty case so I came up with this :) I am providing the step…
Fits 34mm MTB handlebars. Adapters for 25.4mm and 31.8mm are included. I recommend printing the adapters from TPU95. Recommended material for the rest: ASA GF or ASA CF. Use two zip ties to fix the handlebar and Olight (with its original…
I created this model on Tinkercad. I needed a way to prevent the light from turning on when in my pocket. I printed with TPU, and it solved my problem of the light turning on in my pocket.
I recently lost my favourite flashlight. It just slipped off from my belt and it was gone. So i decided to prevent this from ever happening again. This was printed with nylon but pet-g/ABS should be just fine. it was based on this one…
This is a 2-piece case for the Olight Marauder 2 flashlight. The case screws together with 1/4 turn threads to provide protection against dirt and accidental button presses. The case is not water or dust proof and it won't fit any other…
Olight charging stand printed in PLA no supports
Sig P365XL Olight I1R 2 Pro Light Rail Mount I printed with 100% infill, PETG on a textured plate which gave the piece a factory apperance. Link to light (affiliate) - https://amzn.to/3tHrzWc *Disclaimer: This description contains…
What was modified: Reason for this model was to add magnets slot. Slot was design to press fit 6x2mm magnets by default. Tolerance for Olight charging base was tighten by 0.5mm. To remove device from charge base move it to any side…
Always bumping on things in the dark is in the past - clip on this small thingamajig on ye flashligt and be done with em problems! Wife complains about silly headlamp - SLAP ANOTHER LIGHT ON ANOTHER SIDE OF YE GLASSES AND ZOOM AWAY! With…
UPDATE: I think this is the one! Some time after creating version 2 I realized it was a bit fragile. It functioned fine but I seemed to break it about once a week or two. I changed the belt loop, it is now closed. When I broke the holder…
A charging dock or just a mount for the Olight M2R Warrior Pro. by playing aroundg with color changes, also "glow in the dark" is a litte gimmick ;-) Used 4 pieces of 8x3mm neodym magnets for the back…
you only need a 2,5 mm zip tie and mlock nuts and bolts
Tablestand to Load a Olight Baton 3 with magnetic charger
This is a simple flashlight bracket to mount an Olight i3t eos (great EDC flashlight) to my glasses. It is small enough to keep on my keys for when I need it so I can always use my flashlight hands free. The mount is robust enough to…
Fitting / mounting mechanism for the Olight RN120 rear bike lamp. Use the STL or STEP files to create your own mount that fits your needs.
A holder that accepts the Olight MCC 1 A wireless charging dock. Designed to stick to a surface using 3M VHB tape, the charging dock fits perfectly inside without any adhesive and can be pushed out of the bottom through the handy hole.…
Insert your Olight magnetic charger by first feeding the USB port through the printed part and then secure a 25x7mm circular magnet (I used https://www.amazon.com/dp/B09ZX97G2B ) with countersunk M4 hardware (M4x10 or better yet an M4x12).
Very robust and secure design. I made many iterations to optimize it.
https://www.thingiverse.com/thing:4649420 based on wall mount olight charger. Clips to the air outlet of car, slot the charger in (probably need to sand a little have it very tight fit) printed .2 on ender 3 pro use supports
Simple diffuser for Olight i3E EOS flashlight. Print upside down for best results to not need any real support. Prints great in PLA or PETG and works especially well with a glow in the dark filament.
I made this model after getting frustrated with others available, or others being pulled from availability. .15 Layer Height; otherwise the top inside lip will string out. This fits the NEW BLACK charger Blue USB chargers. TIGHT FIT on…
Gridfinity 1x3x3 Olight i3T EOS Laying down orientation for low drawers.
My Olight S2R/ Baton light is used outdoors frequently. While camping, having some "lantern-like" light in your tent can be helpful. I Remixed the excellent "Olight S1R Ultralight Diffuser" by @imbrianj to be sized for my light's slightly…
This base fits the newer, slightly larger Olight chargers. The newer chargers are 22.5 mm in diameter.
The Olight Oclip Pro and Ultra are great lights that I wanted to personalize for first responders.
A stand for your olight baton 4. Print in 2 pieces for better quality. I m using PLA 230°C 60°C 40% infill 0.4mm noozle 0.2mm layer height PRINT WITH SUPPORT FOR THE LITTLE PART!
An HSW compatible holder for an OLIGHT i5R flashlight.
This is an OLIGHT Arkfeld Pro 1300 Flashlight cap/cover. It is designed to click fit onto the front. When not in use, it can also click fit to the tail end (magnetic end). There are two iterations: without loop with loop (for attaching…
Flashlight mount/holder for an Olight Warrior 4X flashlight, that can be mounted onto walls or cabinets with screws. Screw recesses were designed for #8 wood or drywall screws. The Olight Warrior 4X flashlight pressure fits into the…
This is a light diffuser designed to be attached to the Olight 2, 3, 4, and possibly other models. It is 3D printed using PETG. To achieve smoother surfaces, a relatively large amount of tree support structures were used during the…
Gridfinity bin for Olight Baton 3 flashlight. Placed with the clip down. This is designed to be placed at the gridfinity top layer, so it is not stackable. I printed this with a color change at the top 5 layers.
Olight Arkfeld holder for honeycomb storage wall edit 11-19-25: added model for ArkPro - needed slightly more clearance
This is a holder keeping your OLIGHT i5T eos flashlight nicely on your Honeycomb Storage Wall (HSW) for easy retrieval. The hole has a diameter of 18.1mm and a height of 19.5mm, so any other flashlight or object with a max. these…
Best to print in some somewhat flexible material like PETG or TPU. Protects the lense from scratches during carrying :)
Dock with insert for honeycomb storage wall for Olight flashlight magnatic charging cable. Printer : Ender3 V2 Neo Setting : layer height: 0.2 perimeters: 4 infil: 20%
UPDATE: Version 3 is available. Shortly after creating version 1 I realized it was a bit bulkier than I liked. It functioned fine but I felt like It was “in the way”. So, I decided to make one from scratch. There are two design options…
A diffuser for your Olight 1R2 Pro keychain flashlight. Added protection for your flashlight's TIR lens, when not being used as a diffuser
This a mount that I designed for an OLIGHT rear bike light (Specifically this one which I would recommend) . There is a 27.2, 30.9 and 31.6mm option. It comes in 3 parts 2 of which either push together or glue together depending on your…
*DO NOT PRINT WITH CONDUCTIVE FILAMENT* My first two versions of an MCC hanger didn't contain wire management, Third times a charm I guess. This is a minimalistic hanger for Olight magnetic charger bases. It should work with any light…
A way to utilize the flashlight in a static pose for hands-free lighting. I keep going back to Sneaks and his articulating arm design for most of my models because it works so well! I designed the flashlight mount base, the mount, and…
This diffuser for the OLIGHT Oclip will help produce a more even lighting. We make videos on social media using our xTool F1 laser and to help with lighting we wanted to magnetically attach the Oclip inside the laser, but it was creating…
This is a simple holder for the Olight i3t. The Lens is obscured a little that if you use white fillament it and don't push the light in fully it becomes a small lantern. If you want to support me, please download 📥 and like ❤ my prints 🖨…
Mount for Olight RN120 which fits on a Bontrager BackRack Lightweight MIK. May fit other rear racks that utilizes 5mm holes spaced 50mm apart. Printed with supports on buildplate only. If you want to design your own mount I have also…
3 different Olight Seeker 3 Pro Diffusers
Mount an Olight Arkfeld flashlight to a Dyson V8 vacuum cleaner.
This is a thin lens cap for the Arkfeld Pro. It will not fit the Ultra model; see my profile for the Ultra. However, it is as thin as I could make it without it being brittle.
Lithograph stand designed for use with the Olight Obulb. Bulb sits on the back and you can scale the model to your preferred size. Overture white PLA used in this model.
OnShape Link No supports required, print with the bottom of the holster on the bed. Only one prototype needed a (small!) raft. Final version printed with no raft in PETG but PLA/PLA+ would probably be just fine. If the OLight is loose,…
My children and I were all gifted Olight i5R Flashlights. They are very bright, but we though it would be nice to have a diffuser for them. I did start out just making a simple “tube” style, but we wanted to be able to place them on a…
UPDATE: Version 2 is available . Using the OpenSCAD file from Jay Speidell I adjusted the holster to fit the Baton 3 Pro Max flashlight. I also added a lip to the belt clip and a cutout for the flashlights clip. The flashlight was…
Needed a bag mount for an Olight rear bike light. Tested with a Topeak Aero Wedge. Olight uses a proprietary quarter turn mount design that seems to be shared with Magicshine lights so it should also work for those (not tested). Recommend…
Requires two zip ties to attach to the saddle bars.
This is a little holder for a Olight R50 Flashlight. It should also work for the Pro variant, but measure first. The holder has a 43mm x 28mm Hole, if you want to use it for anything else. It has a print in place insert attached and can…
Added models with chamfer for bottom and countersink screws. I did not test print the chamfered and countersunk files.The only thing changed is a .5 mm chamfer to the bottom and countersunk screw holes. One has a 1mm chamfer on the screw…
A cover for the rear end of the Olight Marauder Mini. Charging is still possible. Fits very tight, so you may need to adjust your x/y scaling a bit. The red Front Cap is another model from me.
With this grip I can grip and control the Odin mini in my hand while still have my fingers available to manipulate things to a degree. There's a small latch in the middle to help the grip stay on the light. I only tested this on my Odin…
Fits snugly. It's not going to come off spontaneously. A 27mm (+0mm -0,3mm) diameter polycarbonate disc is required. Compatible models: PL-2 PL-Pro
Gridfinity bin for Olight warrior mini 2 flashlight. Placed with the clip down. This gridfinity bin is ment to be at the top layer, so it is not stackable. I printed this with a color change at the top 5 layers. Also ironing is applied to…
there is a new version available hear: https://www.printables.com/model/1491371-v2-skadis-magnetic-olight-warrior-mini-holder-t-nu Skadis Magnetic Olight Holder simply put a little 8mm diameter 3mm thickness magnet in the hole recommanded…
If you print this with a red filament, you have a dual color diffused light and a white spotlight.
This adapter allows to attach Olight Gober to the Decathlon Vioo clip.
I wanted a simple charging bracket for a little olight flashlight I use at work. This is what I came up with. This only works with the blue metal style olight magnetic chargers. It doesn't work with the larger plastic ones. I do plan on…
Suitable for original Olight Remote Pressure Switch for Warrior X Turbo, Javelot Turbo, Odin, Odin Turbo, Odin Mini In my case used on AR15 with hand guard with interrupted top picatinny rail, attached with 3M 5952 VHB double sided tape -…
Olight Odlin S pressure pad mlok mount. This mount is full-sized and has the wire routing on the top, a bit longer method.
Gridfinity holder for Olight S2R Baton version 1 flashlight and magnetic charger. Only tested with Olight S2R Baton version 1. I don't know if version 2 of this flashlight fits? The overhang of the slot for the charger needs support…
A tactical holder for your i3E light complete with spike and knuckle spikes.
I wanted a nice case/belt holster for the Olight Marauder Mini 2. The magnetic charging port is accessible. The cap is optional and is fixed with a small "nail". I printed everything with extrudr TPU Flex Hard. The case itself can also be…
Protection caps for a olight i3t and olight i5t. Post-Printing Just remove the support and press the cap on your flashlight while placing the flashlight against a floor. It is a tight press fit. Category: DIY
Ein einfacher Diffusor für die Olight i5T oder i5R .
For those days at the range, in the safe, etc… Keep the tailcap and wire secure while the flashlight isn't being used. There are two models. One attaches via M Lok by itself. The other attaches to M Lok along with the flashlight mount.…
A clip-on magnet mount for the Olight imini 2 flashlight. I love this flashlight, and while the rear magnet frequently comes in handy, occasional I to mount it horizontally to a surface. additionally I put a subtle magnet on my glasses,…
Top mount for Olight RN400 bike lamp. Uses the original plastic part but puts it on the top of the light instead of the bottom. Allows for mounting below handle bar and still using the “anti glare” lens feature. Hardware needed: 2x short…
This is a thin lens cap for the Arkfeld Ultra. It will not fit the Pro model; see my profile for the Pro. However, it is as thin as I could make it without it being brittle.
Olight Odin S pressure pad mlok mount. A variation that is full-size and encases the pressure pad and wire routing.