corbeau albator
corbeau albator l'impression de la tête est compliquée, bien choisir le sens selon votre habitude
- Downloads
- 150
- Likes
- 12
- Rating
- 0
39 models
corbeau albator l'impression de la tête est compliquée, bien choisir le sens selon votre habitude
Headset spacer to use with Orbea Orca and Orca Aero (2024 & 2025) and Roval Rapide cockpit. 16gr at 100% PLA infill. Not for commercial use.
Very sturdy computer mount on the headset of the bike. Uses existing insert or print the one I provided (wahoo or garmin). For garmin have the screws vertical, for wahoo horizontal. What makes it good for orbea integrated headset? I keeps…
Simple mount for Garmin Varia radar light to fit Orbea Orca Aero seat post. You need original Garmin insert for light. (or you print one) but is not included in mount.
A spacer in 5 & 8mm was created so that the fork does not have to be shortened directly if the stem needs to be lowered.
Simple two part Orbea Keychain for the MMU.
EN: Chain guard for Orbea with chainring 48 teeth DE: Kettenschutz für Orbea Kettenblatt mit 48 Zähnen Use four M5x10 screws with lens head and M5 screw nut to fix the chain guard.
This is a replacement seat belt guide for the Corbeau seat. STEP file included for edits.
I made this mount to hold a water bottle, the Pro Integrated CO2 Bicycle Saddle Mount Bracket - PRAC0130, and a 1up pump, on the factory water bottle mount. It is very strong and fits my bike well, printed in Apollo X at 25% fill. it uses…
Hello This is the adaptor that enables you to use almost every Orbea road bike that uses a 12x142mm thru-axle on a Wahoo Kickr Snap trainer . The design is taken from the original Wahoo Kickr Snap 12x142mm Thru Axle fine Adaptor , with…
The Orbea Wild FS comes with a key holder placed in the steering tube. I lost my key so i printed a new holder. Works like the original. Can be used to tighten the shaft. maybe it can be upgraded to fit some tools. ( i have a tire salami…
Petg, 0.2-0.4 layer high, no support
I needed this adapter because I replaced the original Orbea frontlight with integrated Garmin mount. This adapter attaches where the original frontlight is normally attached. You can use the original screws.
Split oval headset spacers for the newer Orca and Terra models. Interchangable with stock spacers, able to stack as need. Printed with PETG, 5 walls, with support. They are symmetrical in both axis, so no need to mirror the part in the…
A cap for the Orbea Rise extender, no support, print in TPU
Este modelo está creado para acoplar el manillar Roval rapide a una bicicleta Orbea Orca pero sin colocar mas que el último espaciador, entre el y la pieza asientan el manillar de mejor forma que con el original. El primero lo hice en Abs…
A ends of my btt Obea Alma 28mm Handlebar Nu sopport needed 20% infill 0.4mm nozzle 0.20 layer
Print 0.16 layer height, 0.4 or 0.2 mm nozzle
I have made a holder for my Zefal ZCross pump for my Orbea Occam. I made it due to oversize central tube with a short size with the pedals to place the pump. The holder is mounted directly on the bottle cage. There are three versions,…
Rear axle spacer for Orbea Occam / Rise / Wild. Print it in ASA, ASA-CF or any other re-enforced filament rated for outdoor and mechanical use. Use your smallest nozzle, a fine/extra fine setting for layer hight and 100% infill.
Keep the mud off your back without ruining the look of your bike. I designed this custom rear mudguard specifically for the Orbea Terra , but it will very likely fit many other gravel and cyclocross bikes with a similar frame geometry.…
This is a better version to mount the original Orbea Terra mudguards in the rear. Utilizes the original hardware (M3 and M5 screws)
Some spare parts for an Orbea Occam Dropper post. I modelled them after new parts, but i havent tested them yet. i tried to model as best after the original, but changed a few small details for better 3D printing. If you need to change…
Made this for my active harness. Everything is straight and simple so it keeps the harness centered. It's not the prettiest thing in the world, but it does it's job perfectly. No drilling template… best guideline I have is: Bolt on the…
Downtube protector for Orbea Rise H model year 22 the guard is hold by one of the battery bolt
A simple handle for lockpicks from " le corbeau " 1mm thickness, modify at ur convenience in your slicer. To glue or combine with a shrink tube to reach the thickness you need.
Plenty strong holder for a speedo with bajonett connector plate. I recommend fairly long M3 countersunk screws for connecting the holder to the stem. To be extra careful, I cut only a few threads into the plastic to have minimal play.…
This is a 15mm headset spacer specific to Orbea Terra and Orca models with the oval head spacers. It replaces one 10mm and one 5mm spacer in the stack to add a GoPro mount. My intent behind this was to be able to use triathlon bars and…
Original part is sloped washer to sit in link and create plane perpendicular to axle plus M15x1 screw. https://www.orbea.com/int-en/gear/spare-parts/X426TTCC Using M8 threaded rod and my model of washers to accomplish same. NDS side has…
I had a fall and broke the latch on the downtube storage of my Orbea Laufey. I had time to spend away from my bike so I did my best at reverse engineering the shape of the door. The handle needs to be moved from the original door. I did a…
My dropper didn't come with shims so i made my own, works fine even with the 30mm. Printed in PETG with 100% infill and 5mm outer brim.
Replaces the plastic spacer that holds Orbea's X160 derailleur hanger in place and allows you to clamp the rear triangle. This spacer is a part of the Orbea X203 hardware kit, which is available for around 25 euros. Are you better of…
Este modelo está creado para acoplar el manillar Roval rapide a una bicicleta Orbea Orca pero sin colocar mas que el último espaciador, entre el y la pieza asientan el manillar de mejor forma que con el original. El primero lo hice en Abs…
Some spare parts for an Orbea Occam Dropper post. I modelled them after new parts, but i havent tested them yet. i tried to model as best after the original, but changed a few small details for better 3D printing. If you need to change…