Search results: painted

Sort order

165 models

P
PrintablesStabAlloy

Low-Poly Charmender painted

Painted this model so it can fit mmu setup

Print approx. €3.74–€4.57 excl. taxPreliminary estimate for one variant

Downloads
19
Likes
2
Rating
0
P
Printablesmarkury

Cute Crab Pen Holder (& Painted for AMS)

The original model needed support in the eye holes in my experience, so I made the eye holes the bare minimum depth. I also have included the multicolor painted file for Bambu Studio in case you want to print it with different colored…

Downloads
8,529
Likes
1,892
Rating
4.98
P
PrintablesJustin

Painted Stitch (from Lilo & Stitch)

The attached 3MF file includes a model painted in Prusa Slicer 2.4 that requires a multi-material printer with support for at least five filaments at once (it's designed for the Prusa MK3S with the MMU2S upgrade). There are four ganged-up…

Downloads
2,643
Likes
220
Rating
5

Painted Crystal Dragon

A sudden disappearance of 4 hours of my life. I painted the Crystal Dragon in Bambu Studio, hopefully saving you some time. I recommend printing with flushies, and also printing 2 at a time. Would not recommend scalling down. Flush model…

Downloads
2,121
Likes
422
Rating
5
P
Printablesjedisct1
18+

The source marked this model as adult content.

Downloads
2,085
Likes
744
Rating
5
P
PrintablesOak

D&D Prop Ship - Painted, Large-Format

MarcMartin3dnd over in Thingiverse published this excellent model, based on the sample map in the 5e Dungeon Master's Guide. This is a version of this model optimized for the Prusa XL, specifically: It's made of two huge parts (that…

Downloads
1,473
Likes
346
Rating
0
P
PrintablesJoseph Newton

Painted Nike Air Jordans

Hey, this is a free model from thingiverse that I painted in bambu studios for the bambu series of printers. It turned out really well. I hope you like it! Follow me on Tiktok! @newton00073

Downloads
1,066
Likes
81
Rating
5

Glory (from Wings of Fire) - Painted model for Prusa XL

This model is phenomenal! It is very high res and scales very well! I wanted to give a print of the model as a gift to a fan of the Wings of Fire book series and also take advantage of the 5 colors feature of my Prusa XL 5-tool. I painted…

Downloads
925
Likes
190
Rating
5
P
Printablesmaxelman

Dollhouse food: Sandwich, Fruit Bowl, Pizza, Cheese, Bottles (Painted for Bambu MMU)

Fits this fridge: https://www.printables.com/model/72701-fridge-with-doors-that-open-and-fridge-props

Downloads
866
Likes
176
Rating
4.63
P
Printablessacrilegor

Small pliers hanger for Ikea Skadis (for painted boards)

ncluded a version without hex holes, if you want to add your own set, or don't need it at all. Hex holes are for 2, 2,5, 3, 4, 5, 6 mm I printed it on vanilla white Prusament PLA, with 0.15 layer height and 0.4 nozzle. Snug supports from…

Downloads
791
Likes
199
Rating
4.67
P
PrintablesAaron
Downloads
752
Likes
104
Rating
4.33
P
PrintablesDaniel Thompson

Valentines Bulbasaur - Painted

The original model colours do not come through on prusa slicer so I painted the model. Its not easy to paint, smart fill did a portion but then need small sphere and triangle painting to get the detail. Uploaded the colour file for others…

Downloads
678
Likes
190
Rating
4.67
P
PrintablesR101101

MMU Painted Strawberry

I wanted to test my new MMU3 by printing a strawberry. The only model I could find online that was realistic was a single color model, so I painted it in PrusaSlicer for MMU printing. I’m uploading the .3mf here so others don’t have to…

Downloads
618
Likes
37
Rating
5
P
PrintablesTiger3DPrinting

MMU Painted Realistic Tiger

This is a tiger standing on a rock that I sculpted and then used prusaslicer 2.4s paint tool to colour the model into 4 different colours. just load the 3mf that I included into prusaslicer with your mmu printer selected and then slice it…

Downloads
586
Likes
65
Rating
5
P
PrintablesAdditive Atom

Painted Bambu Lab GSD (Glue Stick Dock)

White and Orange Painted Bambu Lab GSD (Glue Stick Dock) for use with Bambu AMS unit. Original model by thrutheframe

Downloads
558
Likes
87
Rating
5
P
PrintablesJack Salzman

Fully painted Agamemnon’s helmet

From the Odyssey film. File is sliced for Snapmaker U1, but painted regions will remain even if the printer is changed.

Downloads
554
Likes
154
Rating
0
P
PrintablesNils Kal

Minecraft Pickaxe // single piece // painted in Bambu Studio

Minecraft Pickaxe This is a single piece version and already painted in Bambu Studio. The files is suited for multimaterial printing. The .3mf file won't work in PrusaSlicer , if you'd like to use it with Prusa Slicer use the .STL file…

Downloads
474
Likes
51
Rating
5
P
PrintablesOrnotermes

Santa Claus (Painted Multimaterial for PrusaSlicer 2.4)

Wanted a Santa printed in multi material, didn't find a good one so i tried painting a nice single material Santa in PrusaSlicer 2.4 (beta 2). I think it came out pretty nice. I hope this 3mf save works, otherwise let me know. Material…

Downloads
459
Likes
54
Rating
5
P
PrintablesMrHegger

Claw Clip Thermoformed and MMU Painted

Introduction Do you have a woman in your life? Does she have hair? Or maybe you are your self are a person with hair. Then do we have the thing for you! Here we have an outstandingly modelled claw clip that holds hair all day long! And…

Downloads
436
Likes
133
Rating
5
P
Printablesgordonpd

Mewtwo MMU Painted Remix

Details of eyes are extremely fine - recommended to print LARGE or to use fine diameter nozzle. Still working on slicing settings to achieve best final results.

Downloads
396
Likes
14
Rating
5
P
PrintablesNils Kal

Minecraft Axe // single piece // painted in Bambu Studio

Minecraft Axe This is a single piece version and already painted in Bambu Studio. The files is suited for multimaterial printing. The .3mf file won't work in PrusaSlicer , if you'd like to use it with Prusa Slicer use the .STL file…

Downloads
384
Likes
29
Rating
0
P
PrintablesJohnOCFII

Striped Lizard (multi-material) with painted eye for MK4 and MMU3

Used Multi-material painting to add some pupils to the 3 color lizard.

Downloads
374
Likes
35
Rating
5
P
PrintablesDanR32

Pokemon Painted Keyrings

I have used my Bambu lab x1c with 1x AMS unit to print these. 0.4 nozzle with a 0.08 Layer height im awaiting some filaments to print Charmander & Pikachu (Bulbasaur needs a lighter top green)

Downloads
365
Likes
121
Rating
3
P
Printableskeneispike

Cheshire cat- REMIX for Bambu AMS pre-painted color version, from reddadsteve MMU version

Project file for pre-painted Cheshire cat. Printed at .2 and regular speed on the Bambu X1. Had to post it as a new model- the interface wouldn't let me define a remix parent- see https://www.printables.com/model/3825-cheshire-cat-mmu for…

Downloads
296
Likes
38
Rating
4
P
PrintablesToxværd

painted rubber ducky

simple painted rubber ducky for ams, probably also with prusa slicer :)

Downloads
292
Likes
15
Rating
5
P
PrintablesPrusaMe3D

Rox The Fox - 3D Animal Cartoon Creature Figure (Pre Painted) MMU/MMS/AMS

15-20% Infill (Dependent on selection for reliability but mainly preference) 20-30 Degree TREE Support Recommended (30 may involve excessive support removal) Scale is ready to print though models with more thin areas could do with scaling…

Downloads
286
Likes
50
Rating
5
P
PrintablesMax Lush

Toad Mushroom Head (painted in Bambu Studio)

Found this elsewhere and painted it in Bambu Studio, nothing fancy was very quick. I cut the rounded base flat so it can stand on it's own and be printed upwards. I recommend enabling tree supports!

Downloads
281
Likes
31
Rating
4.5
P
Printablestersplat

You did OK Trophy painted

A few people requested that I upload a remix of the trophy painted. Hopefully this helps them out.

Downloads
269
Likes
22
Rating
0
P
PrintablesRay Fox

Painted Articulated Bluey

Painted Articulated Bluey

Downloads
266
Likes
21
Rating
0
P
Printablesjet_maker

Cristal cluster painted / Multicolor

A remix of a cristal cluster, for multicolor printing (or one color). View my other models too. Enjoy printing and follow me!

Downloads
230
Likes
23
Rating
0
P
PrintablesPrusaMe3D

Lucky The Ducky - 3D Animal Cartoon Creature Figure (Pre Painted) MMU/MMS/AMS

15-20% Infill (Dependent on selection for reliability but mainly preference) 20-30 Degree TREE Support Recommended (30 may involve excessive support removal) Scale is ready to print though models with more thin areas could do with scaling…

Downloads
216
Likes
27
Rating
0
P
PrintablesJandrop

Baby Yoda / Grogu Painted Bambu Studio

I just spend my time painting this Baby Yoda that I found

Downloads
208
Likes
28
Rating
5
P
Printablessolarsandwich

Darth Vader Skull Painted MMU3

Painted version of Peter Farell's model for Prusa MK4S MMU3

Downloads
203
Likes
33
Rating
0
P
PrintablesPrusaMe3D

Dee The Bee - 3D Animal Cartoon Creature Figure (Pre Painted) MMU/MMS/AMS

15-20% Infill (Dependent on selection for reliability but mainly preference) 20-30 Degree TREE Support Recommended (30 may involve excessive support removal) Scale is ready to print though models with more thin areas could do with scaling…

Downloads
200
Likes
25
Rating
0
P
PrintablesMichael Brennan

Regal & Markiplier - Iron Lung Blood Bucket Popcorn Container (MMU - Painted)

Painted with four colors: Black, Blood Red, Bone, Lighter Red.

Downloads
197
Likes
10
Rating
0
P
PrintablesPrusaMe3D

Tigger The Tiger - 3D Animal Cartoon Creature Figure (Pre Painted) MMU/MMS/AMS

15-20% Infill (Dependent on selection for reliability but mainly preference) 20-30 Degree TREE Support Recommended (30 may involve excessive support removal) Scale is ready to print though models with more thin areas could do with scaling…

Downloads
196
Likes
38
Rating
0
P
PrintablesTack

Collapsible Lightsaber - 4 colors painted for Bambu Lab AMS

Collapsible Lightsaber - 4 colors painted for Bambu Lab AMS Start with Gold-Red-Black-Silver in the AMS then swap the the first slot (Gold) with green after the last use of gold to get the 5th :)

Downloads
181
Likes
36
Rating
5
P
Printableswaldo

Poop Emoji - Painted in PrusaSlicer

The Poop Emoji by Peter Farell in 3 colors ;-)

Downloads
181
Likes
14
Rating
4.67
P
PrintablesPrusaMe3D

Cartoon Christmas Character Pack #1 - Cute Xmas Figures MMU/MMS/AMS (PRE-PAINTED)

Enjoy 4 Christmas characters for the support on my story & creature releases! Santa & Elf alongside Penguin & Snowman! 4 Great Cartoon-like prints as single or multicolor! Make sure to open as project for the pre-painted models if using…

Downloads
176
Likes
15
Rating
0
P
PrintablesHeidi Makes

Painted Finger Jordans (for MMU3)

This is a remix of my Finger Jordans model, manually painted on PrusaSlicer for the MMU (multi material unit). Printing Tips This print took approximately 10 hours on the MK3S+ MMU3 (for printing two shoes). Use the pre-sliced .3mf file…

Downloads
169
Likes
13
Rating
5
P
PrintablesNightWriter

Vintage Jukebox cover for Google Home Mini & Amazon Echo Dot (Painted .3mf)

I took the time to paint this file for those with an AMS/MMU/Pallet. No changes made to model. This looks so much better than doing a filament swap. Just choose the 4 colors you want, and you are good to go.

Downloads
161
Likes
47
Rating
5
P
Printables3DBob

Star Wars R2D2 Painted for Color Decor

I thought this little droid would look cool in color! I scaled my print down to be 100mm tall. I would strongly recommend to not go smaller than this, and if you have the time and filament to go larger. The colors I used: 1. Black 2. Grey…

Downloads
158
Likes
16
Rating
0
P
PrintablesPrusaMe3D

Sunny The Bunny - 3D Animal Cartoon Creature Figure (Pre Painted) MMU/MMS/AMS

15-20% Infill (Dependent on selection for reliability but mainly preference) 20-30 Degree TREE Support Recommended (30 may involve excessive support removal) Scale is ready to print though models with more thin areas could do with scaling…

Downloads
152
Likes
29
Rating
5
P
PrintablesDavid Relich

Skewer Holders for Painted Parts

When it comes to woodworking I am absolutely hopeless :D But I did need something to help me dry painted things like heads or hands, etc. so I used Fusion 360 to model a pair of simple stands that accommodate skewers with a 3 mm diameter.…

Downloads
151
Likes
30
Rating
5
P

Derpy Tiger Painted (6 color)

6 color model. Requires a color change for tool 4 after the teeth are done printing so that the eyes can continue with the next color

Downloads
149
Likes
25
Rating
0
P
PrintablesGabriel Tippie

crab pen holder Pre painted

crab model painted for bambu AMS

Downloads
148
Likes
9
Rating
0
P

Mr Monopoly Dice Tower (Finished product is painted)

IMPORTANT; PLEASE READ: When printing, scale the print up 1.25x or else dice will not fit through the hole, if this will not fit your printer, slice it in half on the bottom edge of the bag and adjust from there.

Downloads
145
Likes
40
Rating
0
P
PrintablesGlowKitty

Halloween Pumpkin by Ominius Pre-Painted

I painted this model! Wasn't the easiest paint so hopefully I can save you time!

Downloads
137
Likes
32
Rating
0

Stacking Adapter for Painted Trofast

I created this model from scratch with the shelves and some calipers. I view https://www.thingiverse.com/thing:5598290 as the inspiration for it (but that model does not fit the painted Trofast shelves that I have) You will need to print…

Downloads
130
Likes
4
Rating
0
P
PrintablesLee Butcher

Expanded 'bunk' holders Marvel Zombies Organizer (for Painted Minis)

Read the excellent description and see the images of @TShelley's original, the logic of this works the same and the minis are stored exactly as he describes. Leave @TShelley and @PengLord a like for their excellent originals.

Downloads
129
Likes
9
Rating
0
P
PrintablesPosterBored

Painted in PrusaSlicer

Neighborhood kids wanted the gills and eyes painted.

Downloads
125
Likes
39
Rating
0
P
PrintablesDepep1

Cattiva Palworld Painted

I uploaded painted versions of Cattiva from Palworlds. These are “untested” models. I tested that the model does print well but I did not do it in multi-color due to me not having decent colors. Tested for bambuStudio and OrcaSlicer. 2…

Downloads
118
Likes
21
Rating
0
P
PrintablesBazzalight

Minion Stormtrooper MMU Painted version (Remix)

May 4th is coming around again so I needed to produce a cringy Star Wars day trinket. 3mf file may need adaption to your Slicer environment with appropriate Printer profile, filament, layer height etc. You should also tune the purging…

Downloads
111
Likes
22
Rating
0
P
PrintablesPrusaMe3D

Maxi The Monkey - 3D Animal Cartoon Creature Figure (Pre Painted) MMU/MMS/AMS

15-20% Infill (Dependent on selection for reliability but mainly preference) 20-30 Degree TREE Support Recommended (30 may involve excessive support removal) Scale is ready to print though models with more thin areas could do with scaling…

Downloads
110
Likes
23
Rating
5

Delivery Box Sign (MMU Pre-Painted)

A sign for your delivery box for those of us who get too many packages. The .3mf is a pre-painted MMU project. Hopefully someone else finds this as helpful as I have.

Downloads
107
Likes
19
Rating
0
P
Printablestorpedan

(20) Fighter & (30) Rogue Elf color painted 4 colors

These two models have been colored for multi material printing. The general coloring scheme tries to balance four colors allowing separate colors for skin, metal, leather, and cloth.

Downloads
107
Likes
18
Rating
0
P
PrintablesPrusaMe3D

Emile The Seal - 3D Animal Cartoon Creature Figure (Pre Painted) MMU/MMS/AMS

15-20% Infill (Dependent on selection for reliability but mainly preference) 20-30 Degree TREE Support Recommended (30 may involve excessive support removal) Scale is ready to print though models with more thin areas could do with scaling…

Downloads
105
Likes
18
Rating
0
P
Printablesmakemeone.xyz

Curiosity rover by NASA - Detailed version, painted and tuned for good assembly.

Why and what for. AS-IS this model would turn out boring and flimsy, so I've printed using 4 colors. Plus TPU for tires. Tested different pin sizes on different parts to make everything nice and tight but not too tight. Other then colors…

Downloads
104
Likes
34
Rating
0
P
Printablesjwnik

Barbapapa Family Nesting Dolls painted for AMS&MMU

The entire Barbapapa family (9 dolls), snuggly fitting together and painted for use with AMS or MMU

Downloads
100
Likes
9
Rating
5
P
PrintablesRay Fox

Painted Face of Pepe the Thinking Frog

Painted Face of Pepe the Thinking Frog

Downloads
98
Likes
17
Rating
0

Aufsteller für Steine o.ä. Stand for painted stones or similar

Aufsteller für bemalte Steine oder ähnliches An alle Downloader, die keine BOTS sind: Über ein Make, ein Like oder einen Kommentar freue ich mich sehr! Auch (konstruktive) Kritik oder Erfahrungsaustausch ist willkommen! Bitte beachtet…

Downloads
93
Likes
7
Rating
0
P
PrintablesDed Makar

Painted Desert Warrior

If you downloaded the model, it means you are interested in it. Don't forget to like it, please!

Downloads
89
Likes
8
Rating
0
P
PrintablesVladimir Kafka

Majora's Mask painted for INDX

A few color adjustments, printed and tested on the Prusa CORE One+ INDX.

Downloads
88
Likes
29
Rating
0
P
Printablesoriddlero

Articulated Shark - Painted

Articulated Shark - Painted

Downloads
87
Likes
6
Rating
0
P
PrintablesRay Fox

painted Frog for MMU3

Painted Frog for MMU3

Downloads
86
Likes
7
Rating
0
P
PrintablesChandler Newby

Low-Poly Snorlax Painted

Awesome model by @flowalistik, just painted for multi-extruder.

Downloads
86
Likes
7
Rating
0
P
PrintablesM.J. Caboose

152cm (!) Robot from movie A.P.E.X., Painted

I really had to go for it … This bad boy is a filament print of the robot in mutible pices to combine to a 1,5m tall version. This print is done with regular cheap PLA filament since it was intended to be painted from the very beginning.…

Downloads
84
Likes
26
Rating
0
P
PrintablesPrusaMe3D

Doug The Pug - PrintMon 3D Animal Creature Figure (Pre Painted) MMU/MMS/AMS

15-20% Infill (Dependent on selection for reliability but mainly preference) 20-30 Degree TREE Support Recommended (30 may involve excessive support removal) Scale is ready to print though models with more thin areas could do with scaling…

Downloads
80
Likes
16
Rating
0
P
PrintablesPrusaMe3D

Mitch The Ostrich - 3D Animal Cartoon Creature Figure (Pre Painted) MMU/MMS/AMS

This guy was just racing after some things bouncing around in the fields!? They got away in a ditch with a hole - away from this ostrich, called… Mitch!

Downloads
77
Likes
12
Rating
0
P
Printablescoco

Ikea Skadis Painted Cable Organizer Hook

El modelo original no funciona en mi ikea skadis blanca, las ikea skadis pintadas son un poco mas gruesas que las ikea skadis sin pintar ( Marron ), asi que rehice el gancho para hacerlo compatible. Este gancho es valido solo para ikea…

Downloads
72
Likes
15
Rating
0
P
PrintablesUrXBf

Plant Watering Schedule Painted

Painted and exported as a 3mf file for multi color printing.

Downloads
72
Likes
27
Rating
0
P
PrintablesZED

Animal Paw Keychain (painted for Ams)

It's the same model but painted for batch printing without having to go and manually change the color:)

Downloads
71
Likes
9
Rating
0
P
PrintablesDom Lamberti

Painted Kumiko Door for IKEA KALLAX

Many people have taken Josh's amazing door inserts for the KALLAX system, including LockHar_ with their gorgeous Kumiko design, which they also graciously uploaded a single-piece model, much like Josh did for those of us with larger…

Downloads
70
Likes
49
Rating
0
P
PrintablesSubtleSorcery

Wednesday Thing Multi-Color Painted

I printed this on my XL 5T with 3 colors. I had a TON of issues with Hatchbox filaments getting stuck on the roll otherwise it would've printed perfect. The second time around it turned out amazing!

Downloads
70
Likes
11
Rating
0
P
PrintablesRich

MMU3 painted Mansions of Madness Player board

Painted MoM player Dashboard for the MMU3

Downloads
69
Likes
9
Rating
0
P
PrintablesUnclebooch

T-Clip for Painted Skadis with P

I printed mine in PETG-HF on my Bambu P1S. 0.28mm, 2 walls, 15% infill

Downloads
69
Likes
9
Rating
0
P
PrintablesPrusaMe3D

Gus The Walrus - 3D Animal Cartoon Creature Figure (Pre Painted) MMU/MMS/AMS

15-20% Infill (Dependent on selection for reliability but mainly preference) 20-30 Degree TREE Support Recommended (30 may involve excessive support removal) Scale is ready to print though models with more thin areas could do with scaling…

Downloads
66
Likes
14
Rating
5
P
PrintablesBoem

Painted Tulip Free Flower

Bring a touch of artistic elegance to your space with Painted Tulip, a 3D model designed to capture the charm of hand-painted floral art. Whether you’re creating a decorative piece for your home, a unique gift, or adding a personal touch…

Downloads
66
Likes
12
Rating
0
P
PrintablesIdan

Articulated Axolotl painted in SnOrca

Repainted the articulated axolotl in pink and purple with black eyes in Snapmaker Orca for the Snapmaker U1 printer.

Downloads
57
Likes
7
Rating
0
P
PrintablescargUlet

would poop here again MMu painted

Painted for your convenience

Downloads
55
Likes
8
Rating
0
P
PrintablesOak

4-color painted Kenji

This is a remix of Kenji, a nice little print-in-place articulated robot. This is the same, just with 4-colored multimaterial painting with PrusaSlicer. My son picked the default colors :-)

Downloads
55
Likes
7
Rating
0
P
PrintablesSpaceFinder

Painted Egg Dryer

A painted egg dryer/holder for letting your painted eggs dry in the sun. It's designed to have minimal contact with the eggs to prevent messing up the designs, but enough to sufficiently support them. Printing Tips No supports required…

Downloads
49
Likes
9
Rating
0
P
PrintablesRyan

Painted Totoro planter with grassy coaster

Remix of CalebTimoteo's wonderful Totoro planter. My modifications: Painted Totoro (four-color) for life-like appearance Created a grassy coaster for species-appropriate husbandry I guess, Totoros seem to be most content in grassy…

Downloads
46
Likes
8
Rating
0
P
PrintablesPlants X Tech

2-Color Pre-Painted Print-In-Place Marble Run

Multicolor version of this awesome marble run and it took a long time to paint so thought i'd share!

Downloads
45
Likes
2
Rating
0
P
PrintablesForma Idea 3D

Stormtrooper Helmet Painted

I made this remix, for print in less separated parts for avoid glue all parts (the H2D model). I added extra designed blue parts not present in the original model for avoid paint by hand this parts. Edit: I made one change in the chin…

Downloads
44
Likes
29
Rating
0

Aufsteller für Steine o.ä. Stand for painted stones or similar

Aufsteller für bemalte Steine oder ähnliches Stand for painted stones or similar Category: Decor

Downloads
43
Likes
2
Rating
0
P
PrintablesCuajinais

Battlelore 2nd Ed Core Box Storage for Painted Minis

I created these simple storage solution to have each mini in its own place so they don't bump into each other and ruin the paint job. Note that this is not intended to fit into the game box. You will need to get a separate storage box for…

Downloads
42
Likes
7
Rating
0
P
PrintablesShane Pankhurst

Filament Painted Frog

Created in HueForge filament painting software. I printed this using the Bambu AMS to swap. I believe you can change the swaps to pauses to allow you to change filament manually but haven't tried that. Print at 100% infill with a layer…

Downloads
42
Likes
23
Rating
0
P
Printablescaptaincorey

Skull Mask painted in PrusaSlicer and printed with MMU3.

A skull mask painted with the PrusaSlicer and printed with the MK4/MMU3! The model was printed in PLA and the end print is fantastic!! The size as presented fits an adult face! Also included is the MMU Prusa Slicer project file with the…

Downloads
41
Likes
6
Rating
0
P
PrintablesJon Ferraez

Centauri Carbon Canvas ToolHead (Remix of the original "CCCanvas_ToolHead_Final.stl" model file, now with manually painted on supports added)

Centauri Carbon Canvas ToolHead (Remix of the original single "CCCanvas_ToolHead_Final.stl" model file, now with manually painted on tree organic type supports added). This is the original model remixed to have the painted on supports…

Downloads
41
Likes
6
Rating
0
P
PrintablesBazzalight

Miss Piggy remix MMU Painted version

Attached 3mf file contains my colourised mod for the statue. (nb 3mf may not be correctly interpreted for a Bamboo printer environment) I have used 5 colours Cyan eSun Silk PLA Peach Pink eSun Matte PLA Concrete Gray Spidermaker PLA…

Downloads
40
Likes
2
Rating
0
P
PrintablesEhu

Loose tolerance version of the T-clip for painted Skadis

I found that at width of 4.5 mm fits my skadis boards better.

Downloads
39
Likes
3
Rating
0
P
PrintablesDanR32

Pokemon painted keyrings V2

these have been painted I have not tested the files yet but the sliced files look to be ok . Bambu lab x1ca with 1x AMS 0.4 nozzle with a 0.08 layer height

Downloads
39
Likes
5
Rating
0
P

Prayer for the IDF - filament-painted with HueForge | מי שברך לחיילי צה״ל

Show your support for Israel and its brave defenders with this filament painting of the Hebrew prayer for the Israeli Defense Forces superimposed on soldier silhouettes and the Israeli flag. Created with HueForge. Printing Instructions:…

Downloads
39
Likes
19
Rating
0
P
PrintablesGalacticViper

Ion Cube (1000%) MMU Painted

This is simply the original design scaled to 1000% and MMU painted in Slicer. I did nothing else to it. I'm only posting this for the convenience of other people who want to MMU print this, but don't want to waste time MMU painting it. I…

Downloads
38
Likes
7
Rating
0
P
PrintablesJoel Pang

Painted Maneki Neko

Painted the Maneki Neko with 4 colors for the Snapmaker U1

Downloads
38
Likes
2
Rating
0
P
PrintablesPrusaMe3D

Fluffy The Fishy - 3D Animal Cartoon Creature Figure (Pre Painted) MMU/MMS/AMS

What an odd mix up! More to come? Ohhh.. and this is Fluffy.. The fish of course!

Downloads
36
Likes
7
Rating
0
P
PrintablesAlex Hayden

Painted Clock

Scaled up to 1:12. Painted for multi color printing.

Downloads
36
Likes
15
Rating
0
P
Printablesdougisfunny

Painted Lindor Lindt Reindeer

A reindeer with some cute eyes added. I printed it with .25 nozzle diameter, but the slicer seems to think .4 would work well too. Haven't tried it yet. When looking for a dark brown for the antlers and accents I had to get “chocolate”…

Downloads
36
Likes
8
Rating
0
P
PrintablesPrusaMe3D

Damon The Dragon 3D Animal Cartoon Creature Figure (Pre Painted) MMU/MMS/AMS

15-20% Infill (Dependent on selection for reliability but mainly preference) 20-30 Degree TREE Support Recommended (30 may involve excessive support removal) Scale is ready to print though models with more thin areas could do with scaling…

Downloads
35
Likes
8
Rating
0