3 Peice PC Case Update
I'll explain more about this in an upcoming video, just wanted to get the latest files out.
- Downloads
- 184
- Likes
- 19
- Rating
- 0
Counting matching models…
I'll explain more about this in an upcoming video, just wanted to get the latest files out.
Printed in PETG @ .2 layer height, can print with really whatever settings you want. Make sure it's at least a few perimeters for strength. PETG helps with flexibility to snap it over the edge of the aquarium.
gold snailphone phone stand (one peice)
This model is a printable prop resembling the earpiece worn by Uhura, Spock, and others in the original series of Star Trek. This model prints in two pieces, which are held together with cyanoacrylate (a.k.a. superglue). It looks great…
This handy attachment allows you to clip in your decathlon snorkel to any goggles! Helpful if you lost the original clip or just want to attach the two together Enjoy!
This is a 3x6 Center piece intended for use with Wall Control ( https://www.wallcontrol.com/ ) metal pegboards and the DDD Printable Wall Control System ( https://github.com/aderusha/DDD-Printable-Wall-Control-System ). in the DDD System…
just attached all pieces in right place
you might have to sand it baced on what your gun is
I really like this game which originally came from Aki7 and was then remixed by ThomasDN. I found two pieces were a little hard to place on the board. They were flat and my lower than the other pieces. Print the board from the original…
Made this for my bedroom wall as I'm a long-time aviation enthusiast This is made for the A1 or any printer with a 250x250, but you can use the planecut in the slicer to make it fit on
This is an easily printable, but still quite aesthetically pleasing. It takes around $ hours with default Prusa Settings. I originally designed this for a boy at my school who wanted a chess set, but i feel it fits in with the…
This is a replacement internal hinge piece for this item: Porsche Cup Holder Insert one end of a paperclip into the open cylinder and cut it short to fit. This acts as the metal piece that ends up fitting in the groove of the cup holder…
print with supports
Portachiavi 3D ispirato a Brook di One Piece, design compatto e stilizzato con il classico teschio iconico e mascella allungata. Forma piatta e resistente, ideale per stampa 3D multicolore. Include foro laterale per anello portachiavi,…
you need to print the bullets from the link to the original
i made a wire spool that can be printed without supports, it has tabs on the top part that turn and snap into place. bridging needs to be enabled so the small overhangs on the keyed feature print decently. the little bit of overhang helps…
A trumpet mouthpiece with two holes so you can play two trumpets at the same time.
You might want to make it a little smaller but not too small, because as you can see in the images, the arms are a little wobbly. Happy printing!
Introduction I was looking for a hanger for my newly-acquired 13-peice metric hex wrench set. I found only one model, and when I loading it into the slicer, it came out the size of a postage stamp. Well, that won't do, so time to get to…
Add some cool factor to your game. please check out https://www.printables.com/@Jerryie he has allot of cool kit cards.
This model is a MK2 frag Grenade used by us forces during World War 2. "NO SEPARATE PEICE ONE PEICE" this model is an original modal made by ww2 Props an account on maker world please like comment and download!
If your like me and aren't talented enough to paint, then this is for you. it may not be perfect because I have never done something like this might need supports flip the head upside down for easier printing scale it up (i recommend…
This is to be placed into the eyepeice mount of your 1.25" telescope when a lense isnt needed so no dust settles on your mirror, can also be tied onto the scope with 5mm paracord. mine was printed with a .6 nozzle in PETG with a layer…
My take on a LED light Mount for the Creality CR-10 V3 Printers -Two different STL files, one for a smaller LED light and another that allows LED strips up to 399mm. -No additional hardware needed, mounts to chassis braces -Includes…
these pieces work great for any game idea you have in mind i've tested them and for the game i'm working on their perfect.
We lost a piece for our game of Trouble, I have not printed yet but it matches the specs of an original piece. Created in FreeCAD. **I removed the v1 files that were the wrong size. Category: Games
a chess piece you can use to replace the king
these are the half size panel parts for the side panels and the door created with assistance of Dark Squirrel
Queens Glory,Thorn,Snowfall,Vigilence,Ruby,Coral,and Moorhen. All the Queens on Pyrrhia!
Additional gangways that can be added to existing buildings or to create new structures. The floor is screen door mesh but any thin plastic sheet or cardboard can be used. Other Gangway pieces and greebles can be found here: Gangway…
A atc tower for madel airports, hollow on the inside for electrical things
To put it on retaliator barrel you have to unscrew the barrel and unscrew the screw holding in the oringinal sight +Another sight for this is coming and then there will be an sight like this for the nerf stryfe and maybe a flywheel Ww2…
Become king of the pirates with your very own Going Merry from One Piece! Relive the nostalgia of the Going Merry—the first beloved caravel and true nakama (crewmate) of the Straw Hat Pirates. This meticulously crafted 3D model captures…
i got the knight (shrimp from TechnicalTortoise)
his small puzzle is not the hardest thing to solve, but it will be fun to see others try to solve it once you know the answer print with non flexible fillaments such as pla or abs there are 4 solutions I will not give out answers for any…
This is a prusa slicer head peice for otto the robot.
Infill: Off Supports: Off Infill: 15-20%
You might want to make it a little smaller but not too small, because as you can see in the images, the arms are a little wobbly. Happy printing!
A trumpet mouthpiece with two holes so you can play two trumpets at the same time.
Made this for my bedroom wall as I'm a long-time aviation enthusiast This is made for the A1 or any printer with a 250x250, but you can use the planecut in the slicer to make it fit on
To put it on retaliator barrel you have to unscrew the barrel and unscrew the screw holding in the oringinal sight +Another sight for this is coming and then there will be an sight like this for the nerf stryfe and maybe a flywheel Ww2…
Portachiavi 3D ispirato a Brook di One Piece, design compatto e stilizzato con il classico teschio iconico e mascella allungata. Forma piatta e resistente, ideale per stampa 3D multicolore. Include foro laterale per anello portachiavi,…
If you make it, please please share a make, this took me, and the other contributors who started the projects tons of time! Made this wonderful project for my partner, and didnt like the finish of the original pick guard, being two…
people were asking him for the screw peice to be done seperatly.so i did it
This is the entire set with the board and the pieces for it. Print the tiles and pieces in black and in whie
My suitcase end piece broke on my trip to Hawaii so I designed a piece to go on it.
This model is compatible with the z-axis support and spool holder linked in the remix section of this description. It replaces the foot mount right behind the screen you will also need to print two of the foot-01.stl files and one…