easy-to-print phonestand
an easy-to-print mobile phone holder for any phone size
- Downloads
- 24
- Likes
- 1
- Rating
- 0
127 models
an easy-to-print mobile phone holder for any phone size
Simple and quite chunky phone stand for monitoring my Prusa Mini. Printed with Polymaker Polylite PETG
Do you want to use your old phone as a webcam? If so this print will help you to mount your phone on top of your monitor. I made this because i couldn't find a model to fit my monitor monitor (fits all my MSI monitors). This is also my…
This is my take on the well known and loved phone stand with hexagon pattern. I fixed some things about it i did not quite like that much, the changes i made are as follows: One continous patch of hexagon-pattern runnig round the whole…
Downward Dog Pose People practicing yoga know this asana. Printing without support is exactly in the position in which you download this file. Category: Mobile Phone
The readymade .stl is made for a Skoda Fabia 3 (and probably fits other cars for the Volkswagen Group), but you can modify the dimensions in Fusion 360. Since I think most people use a case on their phone, it's designed with this in mind.…
He sits on your desk ready to assist you. Holding up your phone (or potentially jewellery). Granted he is not that small but he fits on the bed of the MK3. If you slice the model yourself you could decrease the infill.
Deutsch: Einfacher Handyhalter für viele gängige Handy Modelle wie iPhone. Funktioniert im Hochkant-, als auch Querformat Druckeinstellungen Handyhalter Schichthöhe: 0,3mm Wandlinien: 3 Material: PETG / PLA English: Simple phonestand for…
As I like to run Youtube videos on my mobile phone during long journeys, I designed a holder for my mobile phone which can be mounted in the cup holder of my car, a Skoda Enyaq. The holder offers enough space for a Pixle 8 in a case.…
Now you can watch youtube videos and tiktoks while eating your breakfast with this practical keychain phonestand!, i've left the longer side blank so you can add some text on it and print it as a gift, you only need supports under the…
Gedruckt mit PLA bei 100% Infill
I had problems with the hinges of the original design but still like the idea. so I came up with different design. V2: improved hinges compared to my first version
Dont like logos or watermarks so i removed them
Smartphone holder with port for charge cord. Adjustable with worm-gear. Glue Cradle gear to cradle on assembly. I assembled the stand completely, then added a few drops of CA glue to the cradle gear side.
very practical phonestand
Hier ein Höhen- und Neigungsverstellbarer Handy- und Tablethalter. Den Knopf zweimal drucken. Es werden zwei M5-Inserts und 2 M5x10 mm Schrauben benötigt. Gedruckt mit PLA, 4 Wandlinien und 25%-50% Infill. Wer den Sockel schwerer möchte,…
Phonestand to hold your phone in three different textures: voronoi, weave and basket. Can fit most phones. Width of the stand 70 mm (can be scaled) Maximum thickness of phone: about 17 mm
For the best stability, i added some double sided tape on it. no support needed.
Printed on Prusa MK3S+ with default 0.2 Prusament PETG settings.
Handyhalter / Smartphonestand
your cupholder can still be used. I added F360 source file if you want to adapt to your phone size.
I was experimenting with features in Inventor and came up with this phone stand. Nothing special, just wanted to share it. My phone keeps falling off, so I added V2 to solve the problem.
A creditcard sized phonestand 85,60 x 53,98 mm adjusted to 85,60 × 54 mm :-) thickness 3.2 mm (A normal credit card is approx. 0.8 mm, so four creditcards thick) Advantages Print-in-place, ready when printed Fits in your creditcard…
A horse-themed device stand that allows you to view and charge your while it sits on this nice stand. I kept all the features designed by @JR and simply added the notch for the convenience of charging your device.
this very simple phonestand can be printed without supports when layed on its side in the slicer. It does what it is supposed to do and doesnt look half bad doing it I hope it helps you and serves you well
ajustable phonestand with a strong fit. easy print, simple design :)
Holder for the IKEA wirelesscharger. Print instructions Printed with Prusa Silver at 0,15mm Layer without Support
Simple and elegant phonestand for horizontal and vertical use.
Created a Phone Stand for watching Movies on the Train etc. Just put the top of your phone in it and adjust the angle to your needs. There is a hole in one side to add the MobiPhoneStand to a keychain. You can get those carabiner hook for…
An simple and elegant, curvy Phonestand/-holder. v1 is thicker, with a width of 10mm. v2 is thinner, with a width of 6mm.
It's an easy print, so not much to explain here I guess :) It may be useful to use a brim! A fun addition is to put your name on it in your slicer software.
Yet another Headphone Stand I designed this, because I wanted a Headphone Stand that could be printed in one piece, yet accommodate larger Headphones. It is designed to be printed standing, so I can make use of the available height of the…
Easy to print in Place no Supports I printed it @0.15mm Layerheight
My daugther like rodrigo model for her tablet but wanted a smaller design for her cellphone. I simply used Thinkercard to remove the inner hollowed section, keeping all other property of this nice design.
This holder is designed to hold a Oneplus 11 horizontally without the tabs getting in the way of the time-scrollbar.
PHONESTAND The stand can hold the phone upright or laying down. The tray is perfect for storing rings, earings, etc when going to bed
A simple headphonestand to support 2 headphones. Instructions Print settings : Layer height : 0.2mm Raft : yes Support : Touching build plate Assembly: All pieces should snap together
It's a keychain that can work as a phone stand and a whistle. I've included a step file, so you can put your name or whatever you want to add on the flat side. It can be a good gift idea.
This phone stand requires printing support in one place only, under the part that holds the phone bottom. Print on side (like in the stl file). I've tested stability with devices up to 16 cm long (6.4"). I can swipe down the top bar…
Heart Keychain Smartphonestand / Herz Schlüsselanhänger Handy Ständer in 2 Neigungen und als Anhänger ohne Halter.
This is part of my State Phonestand collection. More states coming soon.
A simple phonestand, to hold your phone horizontally.
This headphone stand was designed to be printed in one piece, without support, to be used with larger headphones. I wanted it to be a more minimalist option that would work well in both office and home environments. I have tested this…
Just a simple Phonestand (with 2 Angles 60° and 70°)
When slicing this model I noticed some unnecessary seams so I simplified it via lowering the triangle count. Prints very nice in vasemode with 0.8 mm line width! ko-fi.com/vhart
This phone stand works fine in portrait and landscape position. While in portrait position you can charge your phone but you need to have the stand close to an edge. If you have a default cabler charge you need to have the phoneStand on…
here you can download my creation of an magsafe phonestand for iphone. due to the fact, that i fortunately do not have an iphone i had to render this scene for you to showcase :D i modeled it after these measurements if there's anything…
This is my second model of this mobilestand, an improvement from my previous model such as a better fit and the angle of the holder where you place the phone is better. I have only tested it on Samsung Galaxy S10 + and it works very well.
Designed for samsung galaxy A53 ( Not on picture ! ) . Watch out for warping .
Shout out to my neighbors in Arkansas (I live in Texas)
Another phonestand made in 10mm thickness, af a 15mm thick slot for the phone/tablet to rest on. big cut outs to save on filament but still a strong design.
Printing I would recommend printing this model on the side.
Phone stand with Spotify Logo I remixed the original stand to a more stable version. Since I only use it for a phone that makes Spotify available to all guests of the house, I also added that logo. The size can be scaled to your phone. In…
Remix of https://www.printables.com/model/382087-ikea-livbojnordmarke-smartphone-stand
This dog phone holder prints very well on its side with 20% infill. This phone holder is very stable and is great for putting on a night stand since you can charge your phone through the hole for a charger.
Phone stand I designed so that most ports at the bottom can be accessed Looks modern and prints easy
Simple and usefull minimalistic smartphonestand. No supports print. Take a look to my other models and like them.
printing: for a nice finish print the base upside down on a textured sheet. the stands with the outsides facing down for this i also used the textured sheet. the top i have printed with the back facing down to improve the text quality.…
Minimal smartphone Stand I love to use my iPhone as car navigation unfortunately I never know where to put it securely. So I designed a universal phone stand for my Car and my desk at home. Tape it down where ever you like. Have fun and…
Simple vertical phonestand designed for iphone 13
Simple adjustible phonestand. Helical design not tested!!!
It's a foldable smartphone stand. You can 3D print it in one go using a 3D printer (probably). The filament used is eSun
It's a phone stand that goes on a keychain. Comes in 12mm and 15mm versions, as well as a minimal format that tapers on both ends to take up less space and a wide format in 2 styles that takes up more space but balances a phone much…
Phone stand with space for loading cable it was designed for a Honor 9 but the V3 Version fits more phones. The phonestand.stl is the latest version with thicker ground
A Phone Stand with a decorative pattern in three versions: If you print this model, please share pictures. *one version is plain and simple, just the stand. The other versions has different style of slots for charging cable; *one version…
einfaches Modell eines Handyständers
A phone stand with a slide in design for a wireless charger
I designed this iPhonestand. In this stand you can charge your phone while being on a conference call. There are 2 version, one for the smaller iPhones (like Iphone 8 and SE) and one for the newer iPhones (like 14, 15 and 16). I printed…
A phonestand with a hole for pencils. Have fun.
Print at 100% Infill You NEED supports for the theeth but no brim or raft. I made it for my Iphone X but it fits most.
A clean Phonestand Printsettings Suport: No Infill: Dosn't matter
I made a phonestand in credit card size (53 x 84 x 1,6mm). Fits for smartphones up to 12mm thick. I printed mine in TPU A95 , 0,2mm layer hight.
Warning read this before printing! I designed this headphone stand to print on my ender 5 pro(220x220). The extension was planned to snap on to the arm of the mainplate, but it didn't work with Pla and my settings. I broke the arm while I…
This is a two part phone stand where the top part is printed in PLA or PETG and the bottom part is printed in some flexible material. And then glue the two together for a nice stand that does not slide around.
My daughter needed a stand for her smartphone while she was dancing, so I made this simple holder for her. I added a model with a 67° angle. The original one is approximately 81°.
Generative designed smartphonestand. I printed mine with pla, 0.15mm layer hight. Works well without support.
Phonestand vertical, slim with integrated charging cable I use it to place the prusaconnect phone camera anywhere outside the enclosure . One design for max. 8mm and one for max. 10mm thick phones. The recess for the charging plug should…
Small but sturdy phonestand, easy to carry, works also good as fidget toy (rotating), just fun and can also save motivation in long meetings
Phonestand with pencil holder.
I first printed it with PLA+ Filament on a Prusa Mini+ with an 0.4 mm nozzle, but thats to weak, so i finally print this with PETG-CF.
Yet another hook for holding a headphone. But this one is exclusively for microphonestands. The inner hole for the pole is quite tight and fits for poles with a diameter of 15mm. The hook is simply pushed and shoved onto the pole.
it is a steam game based product, which is called Blueland developed by me and my friend.
These are files for every letter of the alphabet, so you can surprise every one of your family with his or hers individual smartphone- or tabletstand. Sketchup2017 file included, if you want to change something.
This model is ai generated based on another model ( original ). I have included both the ai_generated model as well as a modified printable version. Requires 256x256x256 build volume.
Material: PLA Layer height: 0.2 mm (0.16 mm for finer detail) Infill: 15–20% Supports: Not required Print orientation: Flat on base