5 mm LED cardboard/plasterboard ceiling mount
Hole in the cardboard/plasterboard must be from 7.8 to 8.1 mm max.
- Downloads
- 110
- Likes
- 25
- Rating
- 0
16 models
Hole in the cardboard/plasterboard must be from 7.8 to 8.1 mm max.
Rigips/plasterboard dowels, 2 variants, with PZ2 or PH2/PD2 bit. Must pre-drill with Ø6 or Ø6.5mm drill! Printing from PETG or Nylon or strong, extra PLA variant. Filament layer adhesion must be very good! (I printed out from Fiberlogy…
Self Drilling Plasterboard Wall Plug no supports are required. It only requires 23 minutes to print and could avoid a trip to the hardware store ... Wall_Plug.stl <- is for small screws Wall_Plug_v2.stl <- si for bigger screws First try…
Fittings to attach Honeycomb Storage Panels to plasterboard or drywall interior walls, using Ramset Wallmates WM25 plasterboard anchors. The anchors are sufficient to hold the panels, no extra screws are needed. Hollow cover to stash very…
This is a simple tool that helps with drywall ceilings especially when you work alone. You screw in fist plasterboard then slide holder onto one of the screws and then when mounting second plasterboard instead of having to hold it all by…
I made this marking gauge to make it easier to cut plasterboard with a cutter. I wanted to obtain a model that was as compact as possible but nevertheless reliable in its use. For this I use a measuring tape as a base (in my case a…
Gipskartonplatte Loch Abdeckung 50-51mm Durchmesser Abdeckung für ein 50-51 mm Loch in einer Gipskartonplatte. Plasterboard hole cover 50-51mm diameter Cover for a 50-51 mm hole in a plasterboard.
Printing paramters: Layer height : 0.2 Perimeters : 2 Solid layers : 4 Infill : 15% Material : PLA Printer : Anycubic Mega S
A normal iron hook did not hold any weight in my plasterboard ceiling because of the shallow thread. So i designed this 3D printable hook to guide electric cord at the ceiling. Max diameter of the electric cord is 6 mm. PRINTING I printed…
Needed some at weekend this was the fastest solution.. Layer height 0.2 Nozzle 0.4
Made a simple spacer as I always had problems to get the dowel into plasterboard. With the spacer the dowel now sits closer to the tip and it made it easier to get the dowl into plasterboard.
Simple 'plug' to fill large holes in plasterboard prior to filling and sanding. I made these to plug a number of downlight holes ranging from 65mm to 80mm in a ceiling. The file is sized for a 100mm hole, so just scale X and Y with the…
Telescopic support for plasterboard installation MyProject
This is a 3D model designed to help position ceiling lights accurately. It can be particularly useful for recessed LED lights. It features small indentations on each side to easily align it using a laser. In the center, there are large…
Overloading the plasterboard by the curtain rod actual weight may lead to riping the mounting system off the plasterboard and leave some holes, event if fixed the same spot cannot be reused. This is my practical try of reusing the holes…
This 3D model represents a plasterboard electrical box cover designed to address the issue of oversized holes around plasterboard electrical boxes. It is available in two sizes: 60mm and 70mm . The cover provides a practical solution for…