Hell Divers 2 Badges Ranks: 10-Star General, Private, Super Private
Rank Badges for the blue upper levels! Check out my other badges For the whole set! I’m putting together a display for them too. Printed at 25%
- Downloads
- 176
- Likes
- 24
- Rating
- 5
Counting matching models…
Rank Badges for the blue upper levels! Check out my other badges For the whole set! I’m putting together a display for them too. Printed at 25%
Update: PFC, LCpl, and Sgt ranks have been fixed! I created these separate from the other ones because in a Gun Club, ya gotta have guns! Have fun with these for Hail and Fairwell gifts, Moto decor in your workplace, home or bedroom,…
This is low poly airplane model I designed. ✈ It comes in 3 parts: The tail section, the fuselage + wings, and the stand. I recommend printing the tail section with the flat side on the build plate, supports are not needed for that part.…
More options and upgrades available soon, free version includes very basic features! Free Version includes: Clean Cooler Grooved with Spout Model Features: Layered STEP files so under the objects tab you can easily color customize without…
These printable ranks can easily fit on the Prusa or Ender 3 printer. Note, the regular thickness on all of these chevrons is 5.50 mm, except for the specialist rank at 8 mm due to the emblem embossed on the top. Shout out to all my Hooah…
Private 13 is a soldier themed custom part set for soozafone's Dummy 13 1.0 action figure. The set currently includes: Scar-L - The well known and versatile NATO rifle, now for Dummy 13 to wield Helmet - A custom head for Dummy 13…
Show off your super elite status, Zim would be proud! Only the very few reach the dizzy heights of Super Private. This is the perfect way to reward your victories over the scourge that plague our Super Earth. I once heard somebody say…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Private Property No Trespassing Plate This 3D printable model is a warning sign with three dimensional human bones, skull and English text. It is intended for installation on a door, cabinet or any board or object. You can put it on your…
A “Private Property No Trespassing” sign. Works well when printed in white and gone over with red permanent marker. You could also do a color change during the print to get the raised letters and borders to be a different color.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Blank 21x21 Compact SeedQR Bitcoin private key, used as a backup for a 12 word seed, with SeedSigner, Krux and Jade Wallet Painted with Staedtler permanent markers https://github.com/SeedSigner/seedsigner/tree/dev/docs/seed_qr designed by…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
PRIVATE SIGN - DO NOT READ, sign Category: Signs & Logos
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Saving Private Ryan - T4 Medic Irwin Wade - 1998
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Modern Vehicles - 2026 Rolls-Royce Phantom Centenary Private Collection 3D printable model.
I couldn't find a serious sign that said what I wanted. I got tired of solicitors and businesses using my door handle as a trash can. It was was very quick to model and I'm very pleased with the text detail, thanks to arachnid. Using…
I needed a private parking sign. If you ignore the sign you car get smashed. ;-) Printed in ASA (UV resistance). No MMU or Pallette needed. Color Change after 0,4 mm Layer. (use the 3mf File) “Designed” for 0,2mm Layer height. Mounting…
Requires 3 filament swaps. Should be able to scale it down for smaller print beds, but you might want to leave the z scale alone so your first color doesnt bleed through the middle color.
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Private sign, Do not read! Pause print @3.2mm for colour…
I couldn't find one that I liked so I made my own. The image shows the sign face up, but it should be printed face down for best results, and is oriented that way in the 3mf. The outer edge has two perimeters, but all other perimeters are…
This is a private sign - please do not read Print it with color change without MMU
PRIVATE SIGN - DO NOT READ, sign Category: Signs & Logos
Layer height 0,2mm. Height of color (mm). White = 1,0 Black = 1,4 Red = 1,8 White2 = 2,2
Qatar Private Car Plate Key Chain Printed in two parts to use different filament colors or for easy painting then can be snug together. Glue is not needed but recommended. Print Instruction: update the text part with the desired number.…
PETG was used since this will be exposed to the weather. No supports are needed, and a color change is included in the .gcode file. The FreeCAD 1.1 file is included if other fonts or wording changes are desired.
Generated with this handy-dandy tool , then text added and trimmed in height. Great tool, very neat! So far this has two records, I may add more later. - Baby Shark - Barrett’s Privateers by Stan Rogers The vintage unit I have might be…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I needed one in 3 colors so here we go. 2 design options for your convenience. Use prusa slicer color change at layer. Use that twice. -Set 1st layer at 0.32 mm, regular layer height at 0.2 mm. -Change colors once at 1.52 mm and another…
simple little plane i made i would say use supports but enjoy.
I raised the base a little bit so that both feet have contact to it.
Private of the Nezhin Cavalry Regiment
Private of the Sumsk Hussar Regiment
Drop-in interior for Rivarossi's 1920's Heavyweight Observation Car, based on blueprints, http://prr.railfan.net/diagrams/PRRdiagrams.html?diag=priv_180_fp-46249.gif&sel=busi&sz=sm&fr = , of Pennsylvania Railroad's "Philadelphia" Z74c…
"Delivery is about to get dangerous!" Round out the ranks of your Kitchen Commandos with this high-fidelity replica of the original 1988 Private Pizza. This 3D-printable figurine captures the "Pepperoni Paratrooper" in his classic,…
Bring an adorable, chubby penguin companion to your desk! Designed with clean color separation and smooth rounded geometry, this model is fully optimized for multi-color 3D printing on AMS, MMU, or dual-extruder systems. Multi-Color…
Size: 200 x 220 x 3 mm. (you may need to scale it to 99% to arrange on plate) Material: any (PLA on preview). Time: ~2h31m41s. Material used: 119.71 g Print with 100% infill for better quality.
Private of the Astrakhan Cuirassier Regiment
Printed on PETG, ASA could be better, but I don't have blue ASA right now.
Flat plate that says Private Sign Do not read. Print face down using a MMU or multi-head printer. The model was created in OnShape mostly to see how to do it.
This is a private jet made for display on a desktop or table
private property sign Category: Other
This is a plane that I made for display. I
Hey everyone! I made an articulated text necklace/fidget toy and I decided to put the Bambu Connect private key on it. I hope you guys enjoy this! This is a relatively short and easy 1h print. No supports needed! Sadly, this wont fit on…
I wanted to make a new sign for my new house so that people didn't wander up my driveway. I went with “PRIVATE DRIVE NO OUTLET… GUESTS AND DELIVERIES ONLY”. I made a variety of versions though so you can say it the way you want to. I have…
To hang on a door, I put blue tac on the back under the P, above the V and on each side of the S. Stuff… Blah.. Other things… Info…….
A simple sign that can be scaled larger. A larger sign may have more clearly defined lettering; however, this is dependent on your printer. PETG was used since this will be exposed to the weather. No supports are needed, and a color…
A fun and ironic sign that playfully challenges anyone who looks at it! Perfect for adding humor to your space, this sign is great for doors, desks, workshops, or anywhere you want to confuse and amuse guests. Whether as a quirky…
Added a model without “Design by Bambi”. Everybody working in an office knows these ugly information shields printed out on paper years ago and still hanging getting even more unsightly from year to year. I pretty some of them up. This is…
Are you a crotchety old man who dislikes unexpected visitors, shenanigans, and inept drivers ruining your grass because they don't know how to back out of a driveway that they shouldn't have entered in the first place? If so, this sign…
I am just getting started with creating models. This is the first one I chose to share. This is a fairly simple print. I printed this using PLA wood, with a .6 nozzle, and with support.
Holder for vehicle registration plate to display private registration or to present it as a gift. 20% infill, look best with marble filament or wood filament would look good.
A keyholder, intended as a gift from the University of Applied Sciences Leipzig (HTWK) for its graduation ceremony, referencing the computer science concept of a Private Key Infrastructure (PKI). It includes a HTWK front plate and three…
Scenario You're in the front office, you want to keep business cards on your desk, but you don't want customers to see them. Example: we don't want companies in strong competition to see the competitor's business card on our desk. Useful…
Auf Wunsch eines Freundes nun auch in Deutsch: Jeder, der in einem Büro arbeitet, kennt diese hässlichen Informationsschilder, die vor Jahren auf Papier gedruckt wurden und immer noch hängen und von Jahr zu Jahr noch unansehnlicher…
I made this so Private Blanky Can be Shown all around the world Print Settings Printer Brand: FlashForge Printer: Adventurer 5M **Rafts:** No Supports: Yes **Infill:** 15% Filament: ELEGOO PLA any color Category: 3D Printing
Plants want privacy too lol. This is a nice decorative addition to your plants. It also will look nice storing plant tools and etc. Share your prints, leave a comment, and/or leave a review. I added a sliding lock that is movable.
A funny sign. print it, sell it, do whatever with it! I really don't care :) Update: I will post pictures once printed! Print Settings Printer Brand: FlashForge Printer: Adventurer 5M **Rafts:** Doesn't Matter Supports: No **Resolution:**…
🚀 High-Performance 3D Printed Model Rocket (PETG Optimized)This is a high-performance, aerodynamically optimized model rocket designed specifically to be printed in PETG. Utilizing PETG ensures excellent structural durability against high…
"Delivery is about to get dangerous!" Round out the ranks of your Kitchen Commandos with this high-fidelity replica of the original 1988 Private Pizza. This 3D-printable figurine captures the "Pepperoni Paratrooper" in his classic,…
More options and upgrades available soon, free version includes very basic features! Free Version includes: Clean Cooler Grooved with Spout Model Features: Layered STEP files so under the objects tab you can easily color customize without…
🐉 Dragon Generator – Create Your Own Dragon in Blender A Modular 3D Generator for Creatives, 3D‑Printing Fans, and Fantasy Enthusiasts. Imagine being able to create your own dragon — not as a fixed model, but as a fully customizable…
More options and upgrades available soon, free version includes very basic features! Free Version includes: Clean Cooler Grooved with Spout Model Features: Layered STEP files so under the objects tab you can easily color customize without…
The newer version of this model is here: https://www.printables.com/model/1475460-private-driveway-no-turn-around-sign