Mclaren 720s Spyder Car Wall Art
Very nice and detailed model in Wall Art format of a Mclaren 720s Spyder.Size can be changed. I accept model suggestions
- Downloads
- 202
- Likes
- 46
- Rating
- 5
159 models
Very nice and detailed model in Wall Art format of a Mclaren 720s Spyder.Size can be changed. I accept model suggestions
Wall Art Silhouette model of the Porsche Boxster 981 Spyder. Adjustable size. I accept model suggestions or ideas.
Please click ❤LIKE❤ if you appreciate my work 😊 A hybrid hypercar ahead of its time – now as a precision 3D model. This Porsche 918 Spyder wall art captures the iconic silhouette of this legendary roadster, blending elegance and…
Available remix of the car but with an added roof by @Knaifu69_3341312 available here:
So my dad has a Spyderco Tri-Angle Sharpmaker, but it only has slots for 30° and 40° sharpening angles. He wanted a 35° angle so I made him this holder for it. If someone needs a custom sharpening angle just leave a comment and I'll make…
I wasn't satisfied with the filament samples I saw around, they were either too large, too simple, or boring. This is my version of filament samples shaped like floppy disks, with gradients for transparency. I also designed the labels…
This is better printed in ABS/ASA to whitstand the heat, it is designed to be wrapped either in fabric or vinyl. A printer with a 250 size bed is needed all parts can be printed without any support altough brim is recommended for some.…
Print Settings Printer brand: Creality Printer: Ender 3v2 Rafts: No Supports: No Resolution: 0.2 Infill: 7%
If you enjoy my creations/remix, feel free to support me via buy me a coffee- https://buymeacoffee.com/spydergiant This is my own X-shot MPP shroud that I modeled and designed to try to make it look as factory"ish" as possible. Side…
This is the container for my filament samples shaped as mini-floppydisks that you can find here: https://www.printables.com/it/model/862027-floppydisk-filament-sample I 3D printed the Storage Box with 0.12 layer height but 0.20 still…
The Porsche 918 Spyder is a hybrid supercar unlike any that you have ever seen. This plug-in hybrid sports car is designed to maximize both efficiency and power, two elements that typically come at a cost to one another. Print your own…
Here I give you my Para 2 Backspacer parts so you can print yourself some too. You can separate the different parts in your slicer. So you don' t need to print them all at the same time :) Have fun and keep printin! It took quite a while…
Spyderco Manix 2 LW Honeycomb Scales.
Using a old belt I had (see link below for one like it) I replaced the stock hard plastic handle and made covers for the top and bottom opening. Recommend printing in a filament that is UV resistant and Heat resistant. Best way for my…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Hey there, i like to modify or clean my Spyderco knifes but it is always annoying to remove the scales from the lanyard plug. So I designed this Lanyator to solve that problem. It works like a simple chain tool and ensures an efficient…
Bring back the nostalgia with these retro Diskette keychains or minis—perfect for tech lovers, retro geeks, and 90s kids alike! Inspired by the classic 3.5" floppy disk, this charming throwback is a fun way to add some vintage flair to…
Mod's I've adapted to the unreleased Lynx 2.1 files
Original design by PhD Poturak Semir: www.Linktr.ee/3esign : No needs for supports, regular print settings should do.
Very thankful for felixwin providing the original files. I only wanted to print scales to go over the metal liner, not replace the liner and scales. I thinned them out and also added holes for the pocket clip and made the Lanyard hole a…
About This Model These replacement scales allow you to customize your Spyderco Endura 4 with any material/color handle choice you'd like. They also forego the subtle finger grooves on the handle, allowing for a more neutral grip that…
Porsche 550 Spyder 1954 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 -200 Filament material: PLA
This is a modified version of my other Spyderco Mule Team scales, with a hidden Lanyard hole and smooth, solid hex and outline hex surface texturing. These scales were designed around an S45VN blade, I'm not sure what the external…
I utilize @BeaRes' Floppydisk Filament Sample: as my method for cataloging my filament sample inventory. I wanted an easy way to store all my different samples in a gridfinity-compatible tray. This tray is based on a 1x4 gridfinity tray.…
The default model is 2mm thick and arround 40cm. It was abviously to large for my ender3 so i split it in the middle. You can scale the parts as you want but don't scale all the axis the same otherwise the tickness will change too. You…
This bolt was primarily an exercise on how well (and quickly) I could design a threaded bolt in Sketchup Free (web app version) without any plugins. I've got it down to about 5 or 10 minutes. I also have a 2003 Spyder, so I made it the…
Please see this forum post for further information/instruction: I Created a 3D Printed Sheath That Should Work With (almost) All Scales (WORK IN PROGRESS) - Spyderco Forums
This is a 45-degree offset feed neck to replace the clear plastic one that comes with the Spyder MR1 paintball gun. It's designed to use the old bolts and nuts, but if you don't have those, you can use 8-32 machine screws and nuts…
Here I give you my Para 3 Backspacer parts so you can print yourself some too. You can separate the different parts in your slicer. So you don' t need to print them all at the same time :) Have fun and keep printin! It took quite a while…
Took a beautiful, detailed model by Louisdioramas and hollowed it out to make a slot car body in 1/32 scale. It's a very small car, but a great model. Not sure if you can fit a chip in it for digital or not. Category: Hobby
if you have the tri-angle sharpening stone without the base, you can use my solution. Both angle of 30° and 40° a possible. with the cover you have a space saving storage possibility. I recommend PETG but PLA works fin too. NO SUPORTS…
Custom knife Handle/Scales for Spyderco Persistence G-10 Update: 2/10/2026 added a lip to the pivot screw
If you want to fill up your oil without having to awkwardly hold a regular funnel or risk spilling oil everywhere, then this is a must have item. This funnel sits snugly in the filling port of your 1ZZ-FE engine while not interfering with…
Part that adds the Emerson wave feature to the Spyderco Tenacious knife. Still permits opening via the 1/2" hole. Reference images for the Tenacious' shape & the Emerson wave protrusion. I will try & add a thumbstud too so that users can…
Left and right grille replacement pieces fit on each side of your rear license plate if you have lost or broken yours. Both include hole for tow hook. (I bought my Spyder used, with some pretty clever carpet square placement, but I've…
This is printed in two pieces with a clever method for keeping everything in place and well-shaded from the sun. You open the dash cubby lid, and the upper part of the phone holder snaps securely into the top latch. The bottom of the…
Handle scales for Spyderco Mule Team knives. Required accessories: 4x M4 nut 4x M4x12 cylinder head screw The nuts do not need to be inserted during printing. I printed the flat models upside down so that the textured surface of the print…
Porsche 918 Spyder, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…
I printed one good one but I don't think the curve is perfect so I included the f360 file if you improve it please publish the improvements. V2: Improved spline and hole size/placement.
Scales for Spyderco Para 3 Lightweight. I encourage you to make remixes with patterns. PETG/ASA <0.16mm 100% infill Supports not needed
Nach eine Anfrage auf meinen Can Am Ryker habe ich den Can Am Spyder ebenfalls selbst erstellt. Ich hoffe Euch gefällt das Modell. Ich habe in der V2 Griffe, Rücklicht und Seitenteile etwas geändert. Über einen Ausdruck und Bilder dazu…
Toyota MR2 Spyder HVAC knob (This may fit other Toyotas of the same gen, not sure). There is a indication hole, and will work fine as is or can put a small diffusing tape over the back.
Edit-There are 2 versions of steps for this. 1 with a trigger guard and one without. I used some of these files as a base for my personal lynx From the Remnant I used the trigger, sear, and pump which I added a ball detent into From the…
LEGO Porsche 910 Bergspyder 1967
Addicted to Spyderco Mule Team blades in whatever steels you can get, but don't want to buy a set of scales for every copy? Well here you go. These scales were designed around an S45VN blade, I'm not sure what the external tolerances are…
Vampire teeth for your ND Miata! These will only fit the aftermarket Spyder Grill! Just in time for spooky season, help you miot feed on something else than 92 octane and gearboxes. The teeth print in two pieces and attach with zip ties,…
Mount your number plate to the Spyder Grill. Should suit most plates, just position the mounts as needed on the grill or make holes in the plate. Plate will be offset 10mm from grill. Nuts are a push fit into backing plate (use a hard…
I made this inside of Roblox Studio!
Easily printable, includes not only the FreeCAD Design files but also the 2 variants which I made for an extender microsd card. The first modification was to move the brace and remove the screw holder by making the actual screw hole…
Ever thought that the center storage bin on the dash of an MR2 Spyder would be a perfect place to mount a phone? Now you can with this simple accessory that clips between the storage door latch and receiver. Height adjustable for…
These are scales for the Spyderco Black Leaf. I've made them to better find my knife in the madness called my desk. They fit not perfectly but do the job. Print the second one mirrored. Feel free to comment, remix and especially to print.…
lower profile remix of aiber's model. halves bonded together with UV resin. printed in sirayatech blu. Seems pretty solid after about a day of use, will update here if it breaks, i had to snap off the original model with a pair of pliers…
This is a three-part battery hold-down. When I bought my used Spyder, the battery was missing the hold-down bracket, so I designed this strong bracket with a customizable emblem socket. The three printed pieces slide together without…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
UPDATED - 4 April 2021 Some upgrades for the Spyderco Tri-Angle sharpmaker system. I have 2 printable platforms with all angles from 20-60 degrees (inclusive sharpening angle, so 10-30 degrees per side). The first platform is 20-42…
The Rhino Wave Mod is a 3D-printed attachment for the Spyderco Para3 , designed to provide Emerson Wave-like functionality —allowing for lightning-fast, one-handed deployment when drawing the knife from your pocket. After extensive…
A back spacer for the Spyderco Manix 2 XL knife. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .28 Infill: 100 Filament: Filacube PLA Green Notes: Infill does not matter much, 10% seemed to…
I hate to drill into my car for something as ugly as a license plate. I also hate getting pulled over for not having front plates. I tried mounting my plates inside the front grille, but the A/C (believe it or not) performs really badly…
For proper use, print with a material with high thermal resistance. ASA, ABS, PETG, etc. For the SW20, please look at my other models. The size/orientation is a little bit different. This clip was printed so that the prop rod was oriented…
If you've downloaded the MR2 Spyder Pull Strap Covers, but only using the upper cover for a loop style pull strap and want to cover the bottom hole completely.
These are scales for the Spyderco Smock. A simple switch from stock ones, I do not know if this fits clones so do not ask me. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Infill: 50+ Filament: Ovv3d PLA…
Remixed these support brackets for the FilppyDrive Deluxe backplate.
Slides over Bathroom or Bedroom Spyder Control panel, the lights stay on at night and this covers them up and protects the panel. Printed in TPU Black, no supports needed.
For Spyderco paramilitary 2 cruwear scales. Note this this design ONLY works with PM2 cruwear since it has a liner
Fits Axial's 1.9 bead lock wheel. PoisonSpyderRings_V2_1_fixed: recessed holes for screw heads, larger inner circle. PoisonSpyderRings_2: standard bead lock, smaller inner circle. Category: R/C Vehicles
Simple base for sharpmaker stones. Has a hole in the bottom to help remove the stones and avoid buildup of crud.
Parametric box designed for the SPYDR ITSY EVO. Can fit a DJI 04 PRO and its' original antennas. Printed in .04 Nozzle at 25% Infill in PETG.
Postać z polskiej kreskówki “Kapitan Bomba”. Niezrzeszony wojownik Kutarate/Hudo, który podczas turnieju sztuk walki był pretendentem do pierwszego miejsca. Niestandardowe ustawienia: Ogólne: Layer Height: 0,2mm + precise Z height. Wall…
Simple, but effective wind deflectors for the MR2 Spyder. These wind deflectors redirect turbulent airflow when the windows and top are down. They simply attach between the hard plastic A pillar and rubber window seals. No print supports…
A simple switch from the original Spyderco pocket clip. Fits all scales that the original once can fit on. Category: Parts
0% infill Print with organic tree supports [Uncheck option for "Remove Small Overhangs" in Bambu Studio] .4mm nozzle .2mm layer heights Each STL file has a version with and without added text. SD card adapter for FlippyDrive extension…
I love these filament samples! ( https://www.printables.com/model/862027-floppydisk-filament-sample ) Such a fun and practical design - but I am old enough to not only remember the 3 1/2 storage cases... I even had a couple still in my…
This is a simple snap-in backspacer for the Spyderco Smock model. It goes around the original barrel spacers and can be removed by just lifting up and under the tail of the spacer. Category: Parts
Spydor is a mechanical spider toy from the Masters of the Universe line of toys. It was released in 1984. Spydor is a large, posable spider with a laser cannon on its head and a harpoon on its tail. It is controlled by Skeletor, the main…
PYD reusable spool that fit 180x180 build plate, like bambulab A1 mini
Landing Pads for the Itsy Spider drone frame. Protects bottom plate and screw heads. Printed in TPU
Handle replacement for spyderco matriarch knife
Replacement 3d printed cap for a Toyota MR2 Roadster/Spyder, using the original bolt. The spare wheel clamp on my Spyder had rusted in place, and I needed to split the original Toyota cap (with a chisel) to get access to the bolt head to…
Print tire and rim separately, potentially in different colors. For best results I used a 0.2 mm nozzle, PLA and variable layer height.
Brousek na nože, který je variantou na originální brousek Spyderco tri-angle sharpmaker. Tento je rozšířený o úhel 16° a 24°. Ostatní je obdobné jako u originálu. Má i úhly 30° a 40°, 12,5° pro broušení nůžek a zářezy pro broušení…
Made this for my Toyota MR2 (Toyota MRS / Toyota MR2 Spyder) because I don't want to use the typical cigarrette adapters because comes too hot and sometimes doesn't make good connection. With this you can use an excelent buck converter…
Poigné d'ajustement pour can-am spyder Version avec multicouleur pour le cap Besoin de support sous la pièce et imprimé avec le centre plein a 100% pour ajouter de la solidité au morceau
This is Key Holder for CAN AM Spyder F3 RT. Inspired by Mario's Mystery Box. Used PLA material to print. 2 colors. Used M2x8mm hex bolts. Screwed in right in to plastic, no nuts needed. Can be used with variety of different key rings. Use…
Porsche 918 Spyder This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as: wall decoration desk decoration gift for fans Category: Signs & Logos
I created this because I wanted a backspacer for my Military 2 printed at 20% infill with a brim
AMS Lite compatible spool for PYD filament refills
Wanted one with a spyderco logo cutout to see through with transparent scales.
I designed this for the aftermarket audio unit that I installed in my 2003 Toyota MR2 Spyder. The dimensions are very specific to my need so I'm not sure how useful it will be to anybody else, but, I'm going to upload it anyway. Maybe…
What do you need? Insert M2 (D4 x L5) https://s.click.aliexpress.com/e/_oDFNtmr ** Print a Din_Sup lying on the bed for greater resistance
Spyderco Kapara Replacement Backspacer & Compression Lock 3D model STL - File Only Unlimited personal use Follow me on Patreon for commercial use! https://patreon.com/ConraadsCustoms Features: Compression lock assist - custom contoured…
The Porsche 918 Spyder is a high-performance hybrid supercar made by Porsche. It combines a powerful V8 petrol engine with electric motors , giving extreme speed while still being efficient. The car has a sleek aerodynamic design , a low…
A case for a Fysetc Spyder v2 and Raspberry Pi 3B case with 4010 cooling fans.
snip a slit in the antenna ring to allow you to open it up to get the wire through. Use the mirror option to make the other side camera mount.
Print in TPU, I recommend at least 4 walls and 4/5 top/bottom layers depending on your layer height. These are printed at 60% grid infill and have been holding up for almost 3 years now
These are skids are an accessory for Gyrobot's quad frame the Spyda 500. http://www.thingiverse.com/thing:160607 I have designed version 2! http://www.thingiverse.com/thing:897644 I was hoping the Crossfire quadcopter skids would fit, but…
Bring order to your filament samples, up to 40 samples at once. Desinged for floppydisk samples made by @BeaRes