Nozzle decentralized for vacuum cleaner
I designed this nozzle for the vacuum cleaner to be able to reach the really tightest areas of my car. Internal diameter: 34.8mm Available in three lengths
- Downloads
- 394
- Likes
- 42
- Rating
- 5
742 models
I designed this nozzle for the vacuum cleaner to be able to reach the really tightest areas of my car. Internal diameter: 34.8mm Available in three lengths
Proven on the trail, this is a convenient and lightweight solution for hydration in the outdoors. Great for work or school, too. Attaches with a standard zip tie that tucks into a recess to hold it in place and out of the way. Hook it to…
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for PETGSource material: PET
Taca do Pyssla lub innych koralików służy do segregowania kolorów i później do łatwego brania odpowiednich koralików. Nic nie rozsypuje się po stole. Kilka pudełek można łatwo ułożyć w stos i schować by później wrócić do układania. The…
Print approx. €1.18–€1.44 excl. taxPreliminary estimate for one variant
Los Capitanes - Canberra, ACT, Australia ska band 3d logo. Mash up of No Fun Intended and t-shirt spliff cat design. My models are free but if you'd like to buy me a coffee that would be greatly appreciated. Thanks. Note that the corner…
If you enjoy this model, take a look at the new F23 Glider: https://www.printables.com/model/456057-f23-ultralight-glider-print-in-place or a glider starship:…
A completely new Ultralight Glider design inspired by the YF23 fighter jet concept and using lessons learned from my previous Ultralight 2gram Glider: https://www.printables.com/model/430012-ultralight-2gram-glider-print-in-place (also…
A new addition to the series of vases with unusual geometries. The spiraling curves introduce some stiffness to the thin wall structure. A parametric modell in Grasshopper allows for adjusting the spirals and the general outer shape of…
🇦🇺 Welcome to Australia! The Sydney Opera House is one of the world's most iconic buildings and a symbol of modern architecture. It is not only an icon of Australia, it is also our representative of Oceania in the Wanderlust Collection of…
This is a highly detailed sculpt of the Hydralisk from StarCraft 2 HOTS. The base model was ripped from the game and the high res detail was manually resculpted by me, based on the character normal and albedo maps. the post was matched to…
This is version 2 of my Ultralight Crankbait. In this version I changed the shape a bit, added some gill details and it now uses preformed figure 8 hook hangers for tie on's. I used #0 stainless steel sinker eyes. You can get a 100 of…
There are already a number of hand-powered helicopters entered in the Make It Fly contest (like this , and this , and this , and this and this ), so why add another? Well, I was intrigued by these new toroidal rotors (all the cool kids…
Upcycle your empty Elegoo spool! Ultralight version that saves the most filament. Features non-removable dividers that help organize any of your objects. -38% filament used with all 3 full height drawers and 3 sections per bin and 3…
I've recently encountered some technical difficulties with Printables and Stripe, which means I can't sell the complete version of this model with the screw holes right now. I'm actively working to resolve these issues and hope to set up…
Big thanks to Synthetic Electron 3D for his excellent work on the original toolhead redesign. I took a few days to work out minimizing the weight of his design as far as I was comfortable taking it. Can it get even lighter? Maybe, but the…
BOM: Printed with ROSA3D High Speed PLA Gray Stop wasting filament on bulky tools. This is a highly optimized, thin-wall funnel designed for speed, efficiency, and precision. Key Features: Ultralight Design: Engineered with a wall…
This model it's FREE and part of the upcoming releases as part of a fan made project to create every Ghost from the game as collectibles, please support this project, all this is for purchase filament to keep testing the upcoming updates,…
Traliccio in scala H0, semplice da stampare e da assemblare fa la sua figura
This is a super fun print I made a bunch of these a test prints every time I get a new filament. If you have trouble with the feet coming during printing I recommend dropping the model .1mm into the build plate in your slicer it should…
Overview Note: requires 6x 6mm M2 bolts and nuts. This is simple design that takes a single utility blade and gives it a handle and sheath to turn it into a functional knife. Almost the entire length of the blade is exposed in this…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-supported .lys and .stl files for resin provided This model is in two parts, one part for…
My daughter loves the movie Coraline, and this year she is dressing up as Coraline for Halloween. She asked for the key and stone to be printed for her costume, so I decided to share incase there are others out there wanting the same. The…
Gridfinity Skeleton is a baseplate with the goal to use as little filament as possible. Since the baseplate will be generally be placed on a hard flat surface the baseplate does not need to resist bending but rather needs to be strong in…
NOTE: 31/30/25 Model files pulled from Printables.com due to the rewards system. All files available on makerworld. Just search for Ultralight+ or @dbt85. Introducing Ultralight+ Gridfinity bases. Based on an idea I saw by @danimal91 . I…
Planter Tower - Vase mode spiralize If you like it --> press like it :-) I´ve designed a planter for e.g. succulents, sempervivum,maybe strawberries with two top designs (round and swing) and two flat plant coaster. Additional a variant…
Made the Coraline button and button key for a family member, I haven't printed it yet and probably won't. Hope anyone who liked the movie enjoys this.
Ultralisk from the game Starcraft 2 from Blizzard. Printed on Ultimaker 2, 0.1mm layer, 20% infill. Support with meshmixer. Category: Creatures
I removed some excess material from the original, extended the screw holes so you can use the original fan screws for attachment, and improved print supper by extending the two bars near the filament cutter. This new cover helped…
You need to print this cube:- at 0.2mm layer height on a 0.4mm nozzle (or smaller) with 0.4-0.46 line width out of a non-silk material (silk expands when it comes out of the nozzle!) The screw and rod parts snap off to test in the screw…
3d miniature of Melbourne, Australia! Collection of all my miniatures: https://www.printables.com/@jarvizar/collections/1124416 I have many other exclusive miniatures available for free on MakerWorld ! Slicing & Printing Details This…
Introduction This Spiraling Mathematical Drawing Toy has mathematical features. It has a pen hole on the tip of a gear tooth which is located at the pitch radius of the virtual circle. All gears fit together in every way. All pen holes…
-58g with holes / 63g without holes. Weight will vary based on battery and print material. -Wireless using G305 Internals -Rechargable AAA via magnetic microusb tip -Designed for FDM printing -No soldering required FREE THINGIVERSE TEST…
Total pack weight of <120 grams. Rock solid in ABS, other material mileage may vary Utilizes diablo 9 inch carbide tipped wood blades. May need to drill out retention hole in blade with other brands. Print Specs ABS .4mm nozzle .2mm layer…
Post a make if you print! I would love to see it. Clip for Australian L or P Plates, to clip to the side of your numberplate. Non-reversable but rock-solid. Recommend printing in ABS/ASA or PETG due to outdoor use but PLA will probably…
I want to start by giving respect where respect is due for the original model creators for giving me the inspiration to tinker and a place to start! Thanks kerngebiet and mnemic! I designed a drill holder that uses a lot less material…
Originally inspired by Lucendi ’s SUB1 bar end plug, I wanted to make something that took advantage of ellipses for retention. Essentially I made the part of the plug that goes into the bar an oval—wider than the ID in one direction, and…
master key for trollies in Australia, and is sized for a $2 coin
The world doesn't need more boring 3D printed headset spacers, so I made some slightly less boring ones. I also made some very boring headset spacers. These are for standard 1 1/8" headtubes, but I've included the F3D and STEP files so…
See updated model here on Thangs This is remixed from these soucres: Spiralized Gridfinity Bins and Gridfinity - Vase Mode I liked the spiralized gridfinity bin, but it's pretty flimsy and doesn't stack super well, and the reinforced one…
I made this little dekoration in form of bunny as a little Easter gift for my family. Perfekt as little present or as decoration Perfect size for Ferrero Rocher - but can fit other candy You can also find other shapes here:…
Coraline button eyes that can attach to glasses for a cool Coraline-themed costume! Works best with thinner frames. The clip must be glued to the buttons. Depending on your printer's tolerances, you may have to sand the channel on the…
Coincidentally, I noticed that the Seemomster's filament samples matched perfectly in the 2x gridfinity system. So I combined them with my favorite bins: Ultra light bin from Hama . I thought the best height was 4u(approximately 32mm) to…
I DID NOT MAKE THESE MODELS!!! These are official STLs from Finalmouse and are listed on the Finalmouse website for free download and use . These models are just for testing the shapes and feeling if they're compatible with your hand size…
Update 5.11.2022: V2 versions with tighter threads (so it is suitable for more settings since thread holes are printed horizontally) Info: well this is a another model which forced me to learn new things :) challenging model so it is…
Feet for gas canisters used with backpacking stoves. Use three to make the gas canister more stable. They can be stacked
Ultralight glider by robotfriend scaled down to print on the mini+ or smaller printers. UPDATED TO V3 No modifications have been made aside from the scale down but it still flies well.
This is a remix of "Modern geometric Succulent plant pot" by “SchulteGeileTechnik” (thing:4591435). The things are designed solid now. Edges were smoothed and some parts were resized and cut. One can adjust the wall thickness to the…
Need an Australian $1 or $2 Shopping Trolley Coin? Well look no further! :D Simply print it out and add them to your keyring! Great to give to the family and friends. Dimensions: $1 - 50mm(L) x 25mm(W) $2 - 50mm(L) x 20mm(W) Printed at:…
This is an Ultralight Swimbait that is designed to entice almost any type of fish. The swimbait 2 ¾ " long and is my best design yet. I have tested the stresses and have found that it can hold about 15lbs (6.8kg) max as long as you print…
🇦🇺 Welcome to Sydney! The Trains of the World Collection will feature some of the most iconic railways, from cities such as Paris, Tokyo, New York, London, Mexico City, Melbourne, Seoul, and more! This entry contains parts for assembling…
Some covers to fit standard Clipsal 2000 light switches common in Australia. There is some blank covers as well as some to accommodate a Tuya 4 way switch and one for the simple Tradfri Switch. Useful for stopping your not so tech savvy…
Not easy to find good and ultra-light tent pegs, so I decided to make my own! They are very light and very strong (Heavy-Duty), I made them 155mm long. 4 shells and 8% infill works great if you need to save on weight - with these settings…
Designed to be printed in vase mode using a 1mm nozzle @ 0.8mm layer height as well as using a regular 0.4mm nozzle. I've added a back to the sleeve with a hex pattern to increase strength and stability while only using a small amount of…
Coraline Dragonfly hair clip base for a Halloween costume a friend was creating for her little sister.
UPDATED 18 AUGUST 2024: Added three ultralight smaller versions. 27mm, 25mm, and 23mm fingerholes depending on hand size and glove usage. Printed without supports! UPDATED 16 AUGUST 2024: I added wider blade guards with a tip protector…
the camera mount from the five33 whoop These mounts are designed and used by Team BlueEyes in the Italian Whoop League 30 deg 35 deg 37 deg 40 deg print settings: infill: 100% use tree supports fillament: tpu .2 layer also on thingiverse:…
Please keep all these small parts away from children and pets, some parts have pointy ends, and they could be a choking hazard too. Make or use these models at your own risk. This is not really a remix of HLMAX's Coraline Button Key (…
This model is the skull of a 3 years old australian shepherd. It is built from a scan realized for veterinary purpose (the dog is alive and well). No bone anomalies where observed on the scan. Model generated from scan with the open…
Simplified, "working", neuralizer from Men in Black. The idea is that you could replicate this project using anything from 1 hour (+ printing time of around 6 hours for a 2mm layer 0.4mm nozzle print) to a couple of days, depending on how…
These Ultralight Crankbaits were inspired by rallekralle11's tink crankbaits they are just a little more stream line but being so they don't have as much action (wobble) as his. They still work great and I caught a ton of Bluegills and…
I liked andy_burke's idea for a coin holder, but when I printed a test print some coins fit and some didn't. So I thought it would be easier to just redesign my own one from scratch in Fusion 360. I decided to add a lid so that you could…
This is for Australian (and also Swiss!) Wheelie Bins. You'll need a hammer to tap these into place for a snug fit. Let me know if this works in your country and I'll update the description! Category: Replacement Parts
This is another Fly Reel I designed a few years ago. This one is Ultralight Design and was designed and paired this with a cheap Eagle Claw Featherlight 3/4 Line Weight Fly Rod I found on Amazon . Let me start by saying I know very little…
Simple dust cover for a combination of Anderson SB50 (50Amp) and 7 pin flat (Type 3) trailer plug (Australia/New Zealand). TWO models included - for 1x Anderson plugs and the cover for just the 7pin connector. For 12 pin plug version, see…
I wanted to fletch some heavy 1/2" diameter crossbow bolts of approximate medieval design. Having no goose feathers on hand, I figured a 3d printed one could be a decent alternative. Upon searching I found a cool idea by Tal84:…
Coraline button key Would recommend PLA. You might want to print at 150% scale however the model is to scale.
Remix of Ultralight Utility Knife
This is a ultralight Wasp Fishing Lure. See My Website for more info and lures. Full build video below (32 Minutes) Uses #0 Sinker Eyes from Lurepartsonline.com Perfect Rubber (fly tying stuff) - for the legs Feathers - for the wings.…
be careful with it, its a bit fragile if printed in pla
Reach me on social medias for questions, news and support [ Instagram ] [ Facebook ] [ YouTube ] If you like my work you can [ support me via ko-fi ] ------ Meet the all new Pickle Racing frames series. I worked with Darren Allatt from…
Australian Shepherd Wall Art
Remix from https://www.thingiverse.com/thing:29821 https://www.thingiverse.com/rekrapd Just a different layout Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.12 Infill: 20 Filament: Creality…
Mount Panorama Circuit, Bathurst, Australia, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
An escapable trolley token based on the Australian $1 coin size. Plug it into the trolley coin slot, then squeeze the two little arms and retrieve it straightaway! The other side is actually a $2 coin! 💾 I've also included my Fusion360…
The perfect companion during hiking or camping with a small gas stove. With minimum weight in mind, this small contraption weights in at only 9 gram! The gas can shown is a 100g version and fits quite snug. The feet should also fit the…
This project was inspired by those cool IKEA shelf to monitor stand hacks I've seen floating around, though this one is designed for us Aussies. It was cheap to make, super easy to print and I think it'll look great on any modern desk…
LEAVE NO TRACE Ultralight Backpacking POOP Shovel :-) Very hard to find (small and ultralight) so i redesigned and printed my own... If you like hike you can follow me here https://www.komoot.com/user/2906654599921?ref=amk Easy to…
This is code for a rapidly printable hydroponic tower. It's designed almost entirely printed with "spiralized outer contours" and a 0.8mm nozzle. Simply set the bottom width to 5.0mm and print away. The bottom reservoir is 1.6mm thickness…
KMART Australia Pie Maker Pastry Cutter If you have lost the pastry cutter supplied, this is the file you are looking
⬛ 🟡🟥 Welcome to Australia! 🇦🇺🦘 This model is a little different from what we usually do in MiniWorld3D. Instead of a landmark or famous building, this is part of a series of objects representing art & design of the world . Together, they…
Simple dust cover for a combination of Anderson SB50 (50Amp) and 12 pin flat (Type 3) trailer plug (Australia/New Zealand). THREE models included - for 1x and 2x anderson plugs and the cover for just the 12pin connector. For 7 pin plug…
.stl and .f3d files included. I printed the 5cm version and it seems to work well. Both have tolerance of 1mm on all coins except 0.5mm on 2$ and 5c pieces. The 10cm tall version has added feet. Fusion 360 files included if you wish for a…
Remixed to suit the Australian Rangers and i also changed the size of the money holder to suit our coins. I removed the top lip to make it easier to print so it is a friction fit in the console now
Organize your drawers and workbench without wasting filament! These bins are designed to be super lightweight while maintaining enough rigidity to hold bolts, screws, office supplies, or jewelry. The Set Includes 3 Standard Sizes: Small:…
Terrarium Background 3D Model – Modular & Naturalistic Design This 3D-printable terrarium background is designed to create a natural and functional habitat for reptiles, amphibians, and invertebrates. The model features multiple hiding…
Nie wieder das Werkzeug suchen, wenn man an seinem Fahrrad schraubt. Diese Werkzeugablage für den Montageständer Feedback Sports Ultralight bietet Platz für die üblichen Werkzeuge und besitzt 3 Ablagefächer für Schrauben und andere…
I designed this model for a friend who bought real Slovak ultralight plane. Learning by doing project - 3D modeling from blueprints.
Australian Shepherd
I made this little dekoration in form of bunny as a little Easter gift for my family. Perfekt as little present or as decoration Perfect size for little kisses - but can fit other candy You can also find other shapes here:…
Migrating from thingiverse https://www.thingiverse.com/thing:4362301 Original here https://www.thingiverse.com/thing:3797754 at that size, the original were quite weak and breaking easily, remix it to make the wall stronger. compared to…
For everyone like me who's new to working from home, this is great for keeping my phone nearby, visible, and taking up a minimal footprint on my tiny workspace. I'm quite proud of this design. I'm leveraging the fast print speed of vase…
3D model of Australia F1 track 2023 Scale to your desired scale and drop down the Y to get the desired height of the model.
There are a few CPAP adaptors available for Stealthburner, but they typically either completely alter the look of Stealthburner, or they leave behind unnecessary features in the model like provisions for a 5015 blower fan. I've shed a…
Just a model I made of the Australian flag. There are two versions: massive and mini, which can both be printed with a colour change at the specified layers. Bottom layers: Blue Middle: White Top: Red
replica of WWII Australian Trench Knife
Coraline models
AU $2 Trolley Token. Use the new / improved “easy out” paddle version. Or if that doesn't work on your style of trolley the original, in either coin (if you are a rules stickler) and paddle forms, all with keychain holes. For maximum…
Used spec documents, but no guarantee of accuracy. DO NOT USE IN LIVE ELECTRICAL OUTLETS - YOU DO SO AT YOUR OWN RISK. Reference model only. For use as a design aid for parts that have AU sockets and plugs.
I love uploading car parts. Great fun altogether. Maybe some day it will be possible to download a complete Toyota Hilux 1:1 scale Hilux and print it from metal. Make sure you print the bottom part on it's side, I have included some 0.4mm…
Spring Spiraling Pot / Container
Plasterboard cutout jig for Australian power points with notches to align with laser levels. Two small holes are 45mm apart to allow for quick drawing of 90mm holes. Print at .15mm, its thin enough that infill percentage has no real…