Search results: revell

Sort order

94 models

P
PrintablesLukyn3D

Crate Revell

Podpory jsem měl jen na spodním osazení. PLA

Downloads
672
Likes
139
Rating
4.83
P
PrintablesNunuz57

Ikea Skadis Revell glue holder

Skadis holder for Revell Contacta glue : https://amz.run/5fef 3D PRINTING SETTINGS Can be print on 0.2mm layers Requires supports

Downloads
424
Likes
55
Rating
4.94
P
Printableswalid khier

1/24 Jaguar E-Type rim for Revell 07668 and 07687

Apart from the wrong roof, headlight frame and sub-optimal kit engineering, the Revell E-type is a very good kit. I felt that such a beautiful kit deserves better rims than the,… well, kit rims. It is a real see through wire wheel that…

Downloads
258
Likes
22
Rating
0
P
PrintablesTeo_211

Revell Dassault Aviation Rafale C Wall Art

Revell Dassault Aviation Rafale C Wall Art Silhouette model. Adjustable size. I accept model suggestions

Downloads
244
Likes
43
Rating
5
P
PrintablesROLS733

HSW | Revell Holder | Honeycomb storage wall

As the Title says, a Revell Contacta Professional Glue holder for the HSW. Just look for my other useful stuff for the Honeycomb Storage Wall.

Downloads
232
Likes
38
Rating
5
P
Printableswormoworm

Gridfinity Revell Contacta holder

Highlights Holder for a bottle of Revell Contacta plastic cement (article no. 39604). Holes and slots for various accessories, such as a pin to clear the nozzle and sticks / strips used when applying / speading glue. Occupies a 3x1…

Downloads
178
Likes
27
Rating
5
P

Revell Aqua Color bottle/pot organizer for 4, 6, 8, 10, 12 or 16 square pots

Revell Aqua Color bottle/pot organizer for 4, 6, 8, 10, 12 or 16 square pots I needed a holder for a couple of pots of Revell Aqua Color that were flying around in my tool box. Printed in PLA @ 0.2 layer height, 60 mm/s, no supports, no…

Downloads
165
Likes
24
Rating
5
P
PrintablesSeemomster
Downloads
143
Likes
12
Rating
3
P
PrintablesTantalus

Revell Aqua color paint storage tray

No special printing requirement no support required I printed with 3 bottom layers, 3 top layers & 2 perimeters at a layer height of 0.2mm at 15% infill (Rectilinear).

Downloads
139
Likes
20
Rating
0
P
PrintablesKimi

Revell Paintpalette

A little box to store all your favourite revell paints. The diameter of the holes is about 30mm.

Downloads
120
Likes
17
Rating
0
P
Printables3D-Hummel

Revell Junior Kit 864 Disney Cars 3 replacement screwdriver

Since the screwdriver tends to break off when you step on it or get lost. I constructed a replacement in two variants. Both can be printed without support material. The normal version is simply printed standing up and can then be used…

Downloads
119
Likes
12
Rating
0
P
PrintablesM3D

Paint can organizer for Revell cans - organizér/paletky pro skladování modelářských barev - Revell plechovek

This is a simple storage system for Revell cans with paint. Every floor is for 30 cans of paint. I use settings for saving a lot of material and printing time - 0 top/bottom layers (only infill). This settings saves cca 60% of your…

Downloads
116
Likes
25
Rating
5
P
PrintablesAottens

Gridfinity - Revell paint and glue holder

Just a simple gridfinity paint and glue holder for 6 Revell paint cans and 1 Revell contacta professional mini. Prints without any supports!

Downloads
112
Likes
15
Rating
0
P
PrintablesMarcel

Revell Email Paint Stacker & Organizer

As my pots of Revell paint were being stored in cardboard boxes, I took the time to create an organiser. Lightweight and printed with little material. Available in 3 sizes for 25, 20 and 15 pots. Stackable, combinable. Printed without…

Downloads
108
Likes
10
Rating
5
P
PrintablesOliver B.

Revell Farbständer mit Ablage und breitem Pinselfach

Eine Ablage für Revell Farbtöpfe mit Ablage und breiten Fach für Pinsel etc. Farbtopfdurchmesser 310mm Stützstruktur wird nicht benötigt

Downloads
100
Likes
9
Rating
0
P
Printablesfroetz

Revell Paint Organizer / Revell Farbhalter

This is a little rack to organize your revell-paint. You can also put your paintbrushs in. german: Hier ist mein Ordnungssystem für Revellfarben mit Pinselfach. Category: DIY

Downloads
99
Likes
7
Rating
5
P
PrintablesBoomer
Downloads
95
Likes
8
Rating
5
P
PrintablesHabmax

Revell Email Paint Holder for Ikea Skadis

Revell Paint holder for Ikea Skadis. Printed with supports for the upper brackets. They fit pretty tight so that you can easily open the caps. Contact me if you need specific layout. Makerworld: https://makerworld.com/en/models/645438…

Downloads
93
Likes
5
Rating
0
P
Printablesdacz156

Crate Revell 3x4

Holds 12 paint containers.

Downloads
89
Likes
6
Rating
4.67
P
Printables3d Kai

Farbregal für Revell AquaColor

Ich habe ein kleines Wandregal für meine Aqua Color Töpfchen entworfen und stelle es euch zum Download zu Verfügung.

Downloads
86
Likes
13
Rating
0
P
PrintablesJaimz079

Revell Paint Stand

This is a little organiser/stand for 20 revell paint cups. You can also put your paintbrushs in. I can edit it if someone needs a different count of paintholders

Downloads
85
Likes
12
Rating
0
P
PrintablesVoronwë

Gridfinity Paint grid - Revell, Vallejo, Tamiya, Microscale 1x1 - 5x5

To organise your paint bottles, a Gridfinity storage solution for: Revell Aqua paint bottles - 34x34 mm Tamiya 10ml bottles - 36 mm diameter MrHobby 10 ml bottles - 36 mm diameter Vallejo bottles 35/60 ml - 36 mm diameter Microscale…

Downloads
81
Likes
12
Rating
0
P
PrintablesWarlogh

Revell / Humbrol 14ml Can Holders

Description Another Remix of my Upgraded Modular Paint Rack/Shelf. This time I have added holders for Revell/Humbrol 14ml Cans . 18.05.2024 Update Added angled holder so You can see Top can Colored Lids. For this Holder I came up with a…

Downloads
75
Likes
7
Rating
5
P

Revell aqua color stojan

Tisknuto 0.4 tryskou 0.20 vrstva 5% výplň a 2 perimetry bez podpěr cca 700g PLA.

Downloads
74
Likes
10
Rating
0
P
PrintablesMaakloods

Gridfinity Revell Paint Holder Stackable

The model is a 3x3 Gridfinity Revell Paint Holder. It is stackable and has a height of 5 units. I printed it without support in white PLA+.

Downloads
73
Likes
9
Rating
5
P
PrintablesJorisFRST

Skadis Revell email paint can holder

This is a 3 x 2 email revell paint can holder with hooks for Ikea Skadis. Cans hang in the model and can be pushed up from the underside. Print with top on bed.

Downloads
72
Likes
18
Rating
0
P
PrintablesCMarroquin

Revell paint pot holder

simple base to avoid spilling the paint by mistake when painting, can be printed 0.30mm and 10% infill

Downloads
68
Likes
7
Rating
5
P
PrintablesZanu

1/35 Suspension overhaul for TPZ Fuchs A1 for Revell Kit

These models include shock absorbers, rear axle, stabilization arm, rear reflectors and all the hinges to fit everything

Downloads
68
Likes
7
Rating
0
P
PrintablesHoKr

Remote Control Ersatz-Stick (Revell 24924)

Diesen kleinen Hebel habe ich gebaut, um relativ schnell die Fernsteuerung des Baggers meines Sohnes zu reparieren. Der Hebel vom linken Stick brach ab. Auf den Fotos sind die Originalteile zu sehen (in gelb) und das gedruckte Teil (in…

Downloads
68
Likes
4
Rating
5
P
Printablesbrinkbeat

Revell paint and tools tray

I needed something to organize stuff...

Downloads
67
Likes
11
Rating
0
P
PrintablesChezztar

Revell airbrush - Farbbehälter Deckel / Paint container lid

Das ist ein Deckel für den Farbtopf der Revell Airbrush Pistole. Es ist ein Loch vorhanden damit Luft nachkommt.

Downloads
63
Likes
15
Rating
0
P
PrintablesPeter Martin

Paint Storage Boxes - Revell - Humbrol - Plain Empty

Paint Storage Boxes for Revell and Humbrol , also an empty box version. Simple boxes to store Revell Email Color / Enamel Paint 14ml tins in. There is a box that holds 15 tins and a box that holds 30 tins. Complete with lid. Humbrol Paint…

Downloads
61
Likes
5
Rating
0
P
PrintablesShelduck

gridfinity - Revell email

a shallow holder for revell email paint tins that fits in gridfinity 1x1

Downloads
61
Likes
17
Rating
4.5
P
PrintablesJoern

3x5 Acua Color Revell

Super simple storage for your Revell AC colors. Tight fit but easy to take out.

Downloads
56
Likes
11
Rating
5
P
PrintablesDedoper

Revell miniature construction paint sorting tray

Sorting tray for 12 jars of 14 ml paint, from the Revell brand incl. 12 brushes and stir sticks but perhaps jars from another brand will also fit. The diameter for storing the jars is 30 mm. The length and width of the sorting tray is 155…

Downloads
54
Likes
11
Rating
0
P
Printablessinsinewave

Gridfinity Revell Email Paint Tin Holder

Simple and lightweight Gridfinity holder for Revell's small 30mm email paint tins, does not include magnet indents. Pictured examples printed in Fiberlogy's Black Easy PETG at .2mm layer height

Downloads
54
Likes
8
Rating
5
P
PrintablesZossy

Revell paint palette for 12 cans

Revell paint palette for 12 cans

Downloads
53
Likes
4
Rating
0
P
PrintablesKai

Ikea Skadis Revell Aqua Color holder (8x)

A simple holder for 8 Revell Aqua Color packs on Ikea Skadis. The holder is desigend to use the universal hooks from CSD_Salzburg .

Downloads
51
Likes
5
Rating
0
P
PrintablesGeran

Tileable Revell Enamel Paint Holder

Hexagonal tileable press-fit holder for Revell enamel paints

Downloads
51
Likes
9
Rating
0
P
PrintablesHribaDesign

Catch-All Trays / Desk organizer - insert for revell colors

Single liners for Revell acrylic paints usable for the "Catch-All Trays" system.

Downloads
47
Likes
13
Rating
0
P
PrintablesSylthosify

Revell Toxi Hubschrauber - Rotorverbindung Ersatzteil

Da das Bauteil sehr klein ist, lieber zwei auf dem Druckbett verteilen um sicherzustellen das genügend Zeit pro Layer gegeben ist. Notfalls Kühlung stark erhöhen

Downloads
46
Likes
1
Rating
0
P
PrintablesDaweed

Revell Glue holder for HWS

Thanks, @Nunuz57 for the original model! I decided to remix this model for the honeycomb storage wall system for myself and others who may find it useful. Printing instruction : wall perimeter 3 infill 10% res as original part to HWS

Downloads
44
Likes
8
Rating
0
P
PrintablesPrint-3D

REVELL Color Case

A little color pot holder for a single REVELL color…

Downloads
44
Likes
4
Rating
5
P
PrintablesLeeF

Revell Voyager Deflector Dish

A much more accurate deflector dish than supplied in Revell's kit I created this in blender using photos as a guide. May need scaling to fit. Printed on the Elegoo Mars Print Settings Printer: Elegoo Mars Rafts: No Supports: Yes…

Downloads
43
Likes
2
Rating
0
P
Printablesgodmrbrady

Revell Enamel Stand

I have a large amount of revell paint, it was taking up my whole cabinet so I decided to make an easel. One tier is for 25 pieces of paint. The tiers can be stacked , they have a foot area on the top so they hold. Printing: no support…

Downloads
42
Likes
4
Rating
0
P
PrintablesBuildsta

Revellholder for the honeycomb storage wall

It's an easy add on for the honeycomb storage wall from RostaP. The holder fits perfectly to the insert empty. Fast print. What you need (if you don't have the honeycomb wall) the honeycomb storage wall from RostaP the insertempty.stl…

Downloads
41
Likes
14
Rating
5
P
PrintablesKptAgeus

Gridfinity dense Revell paint holder

This 3x2 gridfinity bin can hold 8 cans of Revell email paints. I was looking for a gridfinity bin for revell paints and eventually, I came across this: https://www.printables.com/model/383487-gridfinity-revell-paint-and-glue-holder after…

Downloads
35
Likes
3
Rating
0
P
PrintablesOndřej H.

Stackable revell crate 3x4, minimal supports

Only supports needed are for the base, otherwise supportless.

Downloads
35
Likes
1
Rating
0
P
PrintablesArash68

🇬🇧: Logo Revell / 🇫🇷: Logo Revell

🇬🇧: Logo of Revell with multicolors on one layer with colors change File compatible MMU GCODE available for a single extruder No instructions for print… It's just a logo ^^ ➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖ 🇫🇷: Logo de Revell avec…

Downloads
35
Likes
6
Rating
0
P
Printableswolfgang6533

REVELL Aqua Paint storage for IKEA Skadis

use it with skadis universal hook

Downloads
31
Likes
4
Rating
0
P
PrintablesWpaulS

Revell Junior Kit Screwdriver

Toto je vylepšený skrutkovač pre Revell Junior Kit (konkrétne 00813 - roadster tuning), ale tipujem že to pasuje aj na ostatné Junior Kit. Dizajnovo je čo najviac podobný originálu - čiapočka rukoväte pasuje pôvodná. Je však vylepšený o…

Downloads
31
Likes
1
Rating
0
P
PrintablesAatsileia

Revell paint organiser

I suggest you use organic supports to get the best quality. The print comes in two parts, so make sure to print them both. You can use glue to put them together.

Downloads
30
Likes
3
Rating
0
P
PrintablesPiChaos

Revell Color Tray

This is a thing to store 3 Revell Emaille color pots. Note: The tray is sightly tilted to one side. Prints best with face down. Printable with 0.8mm Nozzle or any other standard size

Downloads
29
Likes
4
Rating
0
P
Printablesbakadave

Revell 1:96 Saturn V wall mount

This is a remix of Tyler_thecreator's 1:144 scale wall mount for 1:96 scale Revell Saturn V scale model. I modelled it from skratch but still drawing heavily from Tyler's design. All parts should be printed twice and in flat orientation…

Downloads
28
Likes
4
Rating
0
P
PrintablesGust

Ender 3 v3 SE/KE storage with glue holder (Revell Contacta Liquid)

A remix of a tool holder I found, that now has a space where I can put the glue that I use for 3D printing. The glue that I use is Revell Contacta liquid, and so will only be able to fit this exact type of glue, but just wanted to find…

Downloads
27
Likes
1
Rating
0
P
PrintablesOle_IPM

Revell 18ml Farbhalterung

Für das sortierte Einreihen von bis zu 21 "18ml" Farben.

Downloads
25
Likes
3
Rating
0
P
PrintablesRoman Noskaj

miešačka na modelárske farby Revell

miešačka farieb Revell v malých plechovkách priemeru 30 mm je napojitelná na akumulátorovú vrtačku vyoseny stred pre dosiahnutie kmitavého pohybu pri miešaní tlačené s vnútornou podperou

Downloads
24
Likes
0
Rating
0

Revell Aqua Color paints Rack (modular)

I have created this modular rack to sort my ever growing collection of Revell Aqua Color paints. I have created a 4x5 rack and a 3x5 rack, with a wall finishing to enclose the rightmost paints. I removed the labels in the paints as…

Downloads
23
Likes
1
Rating
0
P
PrintablesLegoRJ35

REVELL Quadcopter Go Feed replacement

New better Feeds for the REVELL Quadcopter Go

Downloads
23
Likes
2
Rating
0
P
PrintablesCadman97

Aldi pegboard - Revell AquaColor holder

A holder for Revell AquaColor paint pots to suit Aldi pegboards or any board with 25mm spacing.

Downloads
22
Likes
9
Rating
0
P
PrintablesVito

Outland TIE Fighter REVELL folded wings/solar panels detail

This print fix missing detail of Revell 06782 Star Wars The Mandalorian: Outland TIE Fighter scale model in mode with folded wings/solar panels.

Downloads
21
Likes
5
Rating
0
P
PrintablesCMarroquin

Revell cement 12.9g bottle holder

Base to stop Glue Pots from falling over

Downloads
21
Likes
1
Rating
5
P
PrintablesTsumiNL

Revell Aqua holder

A friend of mine wanted to have the original model printed, but it was a bit to bulky for what was needed. Also used a lot of plastic for a holder. I hollowed out some sections to save on plastic and time. Uses +- 410 grams of filament @2…

Downloads
19
Likes
4
Rating
0

1:48 scale bomb rack for Revell A-10 Warthog

Made this for the model I am building, idk if its realistic but it looks great for a basic Diorama IMO. remix if you would like but give credit please. thanks! printed on my anycubic Photon mono 4k in standerd Gray resin. angled to 40…

Downloads
18
Likes
2
Rating
0
P
PrintablesKnudowatz

Revell Contacta Professional Skadis Mount

I created a holder for the Revell Contacta superglue for the skadis wall. Support is required for the hooks. Print settings: Infill: 15% gyroid Layer height: 0,2 mm Filament: Prusament PETG

Downloads
18
Likes
3
Rating
5
P
PrintablesTBX

Revell Email Color Pot Storage System stackable

Revell Email Color Pot Storage System stackable - 14ml 134mm x 138mm No supports needed 5+ walls and solid layer recommended

Downloads
17
Likes
2
Rating
0
P
PrintablesFocusfox020

Revell 1/72 or 1/76 tank double storage

well i made the model if youre using the model make sure to sand a bit of the pillars and remve some filament inside of the pillar stock NOTE! U have to print the pillar 4 times

Downloads
17
Likes
4
Rating
0
P
PrintablesThoHilde

Revell Junior Kit Super Wings - Donnie - left foot hinge

A replacement part for Donnies left foot. The hinges breaks really easy so I remodelled a sturdier version in onshape. The part needs to be printed on the side with supports (see screenshot). I used PLA with 0.2 layer hight, 3 perimeters…

Downloads
17
Likes
2
Rating
0
P
PrintablesChris

Revell Mercedes G Achse Rad Übergang

Je nachdem, wie genau euer Drucker ist, passt die Achse besser oder schlechter. Je höher die Dateiversion, desto größer das Sechskantloch. Meine Empfehlung, druckt das Teil liegend. 20241230 Update V5: -Hex-Loch von 4,5(V4) auf 4,25mm…

Downloads
15
Likes
2
Rating
0
P
PrintablesMklimit

Revell 24662 - Porsche RC - Controller Part replacment

Printed with Black PLA 0.6 Nozzle 0.3mm Layer Height 2 Walls Supports

Downloads
15
Likes
2
Rating
0
P
PrintablesMartin L.

Helicopter wall mount ( Revell " The Big One " )

Hang your RC helicopter onto your wall - doesn't take too much space and takes it directly at the upper rotor! angled mount to reduce wall to rotor distance You'll need a countersunk screw with a base diameter of 4,5mm or less (head dia…

Downloads
14
Likes
3
Rating
0
P
PrintablesSean Riley

Mini Paint Pot Holder (Revell and Citadel)

My wife kept knocking the little sample model paints, that came with her model Fiat 500, over. This little holder stops that from happening. Simple to print with zero supports. The hole diameter is 23mm and is 17mm deep. NOTE: For Citadel…

Downloads
14
Likes
4
Rating
0
P
PrintablesBigD66

Wheel holder on axel for Revell Revellino

My small children broke the wheel holder of a Revell Revellino RC car that connects the axel with the wheel. I created a replacement holder that works. Best for printing: I had issues with the layer adhesion because of the hole in the…

Downloads
14
Likes
0
Rating
0
P
PrintablesPhylius

Revell Dry Pigments stand / holder

I made this stand for Revell Dry Pigments. As the original packaging was uncomfortable. FDM friendly , I printed this model and it fits very well, no postprocessing. Can easily be slotted in place , then glued together. Add foam pads /…

Downloads
13
Likes
3
Rating
0
P
PrintablesSgtBean

Wall mount for Revell Aqua Color Organizer

Since I could not find any wall-mount brackets for stunner2211 's Revell Aqua Color Organizer (https://www.thingiverse.com/thing:1395215) that were just for screwing onto a wall without Gridfinity or Ikea Skadis or some sort, I quickly…

Downloads
12
Likes
2
Rating
0
P
PrintablesRico

Adapter for Revell Airbrush (39200) to AquaColor

I needed a way to spray the AquaColor because I still had many colors of it. That's why I made this adapter. I printed it with PLA, because the glue did not hold properly, I had to help with some electrical tape ^^ The thread was too…

Downloads
12
Likes
5
Rating
4
P
PrintablesLicorneMan

Support de pot de peinture Revell

Support à pot de peinture en acier de marque Revell (14ml Email Color). Ce support est emboitable. Ceci est la base avec son premier étage et un autre STL est disponible pour faire plusieurs étage Emboitement prévu en 0.1mm de tolérance.…

Downloads
12
Likes
0
Rating
0
P
PrintablesFoxThrowaway

Revell Aqua paint storage holder rack 2 x 3

A remix of the amazing 3x5 paint storage by Joern. We finally had a normal storage system for the Aqua paints :D The 3x5 doesn't fit my shelf, so I decided on a 2x3 model I made it smaller and widened the fit juust a bit so the paints can…

Downloads
9
Likes
0
Rating
0
P
PrintablesLicorneMan

Etage emboitable supplémentaire support à pot de peinture Revell

Partie emboitable et escamotable du support à pot de peinture Revell Imprimable sans support ou alors au minimum pour la partie réservée à l'emplacement du pot de peinture Lien du STL avec la base et le premier étage :…

Downloads
9
Likes
0
Rating
0
P
PrintablesTim

Revell Control Sky Spider Mod

With this part you can modify your Revell Control Sky Spider to look better and weight less. The battery-holder is optional. I changed mine, because it was broken. (file: “Drohne2”) Have fun with it.

Downloads
8
Likes
1
Rating
0
P
PrintablesMichał W.

Revell contacta bottle holder

A stand designed to prevent the glue bottle from tipping over. Created in Blender and printed with PLA on a Bambu A1 printer.

Downloads
8
Likes
1
Rating
0
P
PrintablesQDNgineering

Revell Hobby Knife Cap / Hobby Messer Schutzkappe

Not even a week into owning this knife i have already misplaced the cap. So I quickly made a replacement for it. And I unfortunatly only figured this out after I lost the original, but you can actually attach the cap to the Back of the…

Downloads
6
Likes
0
Rating
0
P
PrintablesGuillaume G

Driveshaft for Revell 24830 and 24831 RC cars

This a driveshaft replacement for Revell 24830 and 24831 RC cars. Suitable for both front and rear. Must be printed in 100% infill and with supports. Tested successfully with PETG. ABS should be fine as well, but PLA is likely too soft…

Downloads
5
Likes
0
Rating
0
P
PrintablesJan Simek

Skadis Revell Mini Needle Holder

I adapted the mounting system from the original model to use the IKEA SKÅDIS system. The rest of the model was designed for Revell Mini Needles https://revell.com/de-eu/products/390779090-mini-needle-files-pk6 Print the top section with…

Downloads
4
Likes
1
Rating
0
P
PrintablesTimothee

Porte peinture Revell V1 et V2 et V3

pas encore essayé la V2 nécessite de la colle

Downloads
3
Likes
0
Rating
0
P
PrintablesPeterlii

Revell RC Car Trigger

My son ruined the trigger of the remote control for his 1:24 Revell Chiron model. This remote controll seems to be widespread... so maybe someone might find it useful. Printed in PETG with 100% infill and support. Hint: There are 4 screws…

Downloads
3
Likes
0
Rating
0
P
PrintablesFrank

Ersatzteil / Replacement part "Revell Stunt Mini 1080"

Ersatzteil für die Radbefestigung bei einem "Revell Stunt Mini 1080" Fahrzeug. Bei unserem Fahrzeug ist die Befestigung eines Rades gebrochen. Man kann das ganze Auto gut aufschrauben. Vorsicht beim Öffnen der Antriebsseite. Das…

Downloads
1
Likes
0
Rating
0
P
Printables

Revell Email Paint Stacker & Organizer

As my pots of Revell paint were being stored in cardboard boxes, I took the time to create an organiser. Lightweight and printed with little material. Available in 3 sizes for 25, 20 and 15 pots. Stackable, combinable. Printed without…

P
Printables

Mini Paint Pot Holder (Revell and Citadel)

My wife kept knocking the little sample model paints, that came with her model Fiat 500, over. This little holder stops that from happening. Simple to print with zero supports. The hole diameter is 23mm and is 17mm deep. NOTE: For Citadel…

P
Printables

Stackable revell crate 3x4, minimal supports

Only supports needed are for the base, otherwise supportless.

P
Printables

Skadis Revell email paint can holder

This is a 3 x 2 email revell paint can holder with hooks for Ikea Skadis. Cans hang in the model and can be pushed up from the underside. Print with top on bed.

P
Printables

Tileable Revell Enamel Paint Holder

Hexagonal tileable press-fit holder for Revell enamel paints

P
Printables

Revell Email Color Pot Storage System stackable

Revell Email Color Pot Storage System stackable - 14ml 134mm x 138mm No supports needed 5+ walls and solid layer recommended