86 models
A Caddx Peanut mount for GepRC Smart35 (no matter if Analog or HD). It is a strait replacement for the original SMO4K/Naked camera mount. If you're using original Peanut adapter/case remember to lock your camera in there somehow. No…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
Remix of RT3D 's Wire Cutter Wall Mount to instead hang on a plexiglass wall of a Lack enclosure. Print with supports (as shown in the images), remove the supports and then gently push on the plexiglass from the inside of the enclosure…
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for one variant
I designed a series of honeycomb-style keychains featuring various car brand logos. Each keychain combines a lightweight and modern honeycomb pattern with the distinctive emblem of the chosen car brand. The design is both stylish and…
Описание на РУССКОМ языке – ниже. New Year Decoration: Snowflake This is the third variant of my 3D snowflake. You can find other variations in my profile. Fully free commercial use with no restrictions! Low cost, mass production – 10…
THIS IS EXPLICITLY NOT FOR COMMERCIAL USE A motorcycle mount for an Oukitel RT3 rugged tablet against a 22mm bar. The design is intended to be modular and allow different mounting points. The intent is to use the rugged Oukitel RT3 for…
“MAJ : on m'a informé le 28.06.2023 que le STL s'ouvrait sur Pusaslicer, BambulaStudio, mais pas sur CURA, j'ai donc créé un nouveau fichier STL V2” La grande Vague Kanagawa Art3Dchoix 3D PAINTING version Hokusai, HUEFORGE Généré avec le…
Vidéo disponible sur mon compet => https://www.instagram.com/reel/CpA8PRNjf5e/?utm_source=ig_web_copy_link Illusion d'optique du Demogorgon de “Stranger Things”, by Art3Dchoix Imprimable en 0,2mm / Vitesse lente pour la première couche…
Stranger Things STRING ART 3D optical illusion By Art3Dchoix ================================================ Voici le modèle en vidéo : https://www.instagram.com/p/Cg4rh3ejF_4/ Photos : https://www.instagram.com/p/ChNeUuxI5NS/ Pensez à…
The speaker/mic rubber port cover of my Retevis RT3S crumbled to pieces, so I designed from scratch this replacement port cover. From my understanding, the Retevis RT3S is the same radio as the TYT MD-UV380, so I think it will be…
The Qidi X-Smart3 has a fluidd interface on port #10088 that will accept a web camera. This mount simply lays in the top groove of the printer. The camera I uses is from amazon . I just plugged int in and reboot the printer and it worked.…
Video disponible ici => https://www.instagram.com/reel/Co7z0iSDTdd/?utm_source=ig_web_copy_link Illusion d'optique de deadpool Imprimable en 0,2mm Vitesse lente pour la première couche Vous pouvez le redimensionner, ajuster le Z si…
CALL OF DUTY Color lithophane NEW concept de Lithophanie Couleurs par #Art3Dchoix Tutoriel disponible sur Instagram https://www.instagram.com/p/CtUXcQqARTd/ ☝avec une seule bobine 3D par exemple une blanche / fonctionne avec toutes les…
This is an antenna mount for the 2.4Ghz ExpressLRS antenna for the GEPRC Smart35. It can be used on the back or the front, depending where you mount your receiver and the length of your antenna cable. It may work on other frames but it…
Recommend printing in orientation provided as laying down the axial torque is likely to separate layer lines.
An arm protector/skid for GEPRC Smart35. To print in TPU. It's designed to print without supports, just lay it down on the angled flat surface near the bottom of the protector (look at picture here of the model in Superslicer)
Bonjour, voici une impression 3D du Démogorgon de Stranger Things en version illusion d'optique https://www.instagram.com/reel/DRnE3XpgE4D/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA== Le fichier et en 3MF vous pouvez le transférer…
This is a Diffuser for an RC car (optimized for HPI RS4 Sport3). With this Diffuser, you can increase the downforce of your RC car to enhance the cornering speed. Advantages over the Previous version Better airflow towards the diffuser…
DJI O4 Pro camera mount for the GEPRC Smart35
Vidéo disponible sur mon compte => https://www.instagram.com/reel/Co5OVsdDKTW/?utm_source=ig_web_copy_link Illusion d'optique de Wlater White “Breaking bad”, by Art3Dchoix Imprimable en 0,2mm / Vitesse lente pour la première couche Vous…
🪄 Minimalist A-Frame Business Card Stand (Free Model) Simple. Clean. Functional. This minimalist A-frame business card stand prints perfectly without supports and fits all standard-size business cards. Ideal for: • Offices • Salons •…
Mini toy sci-fi spaceship inspired by, and somewhat in the style of the Astro Mini's space exploration themed mini toy series, produced by Bruder in West Germany in the 1980's. This spaceship features three swivelling turbofans, as well…
Bumper for Smart35HD to print in TPU
Printed at 0.20mm Standard layer height with 2 walls and 5 base layers to strengthen the bottom.
This is a Diffuser for an RC car (optimized for HPI RS4 Sport3). With this Diffuser, you can increase the downforce of your RC car to enhance the cornering speed. (STILL IN PROGRESS!) Advantages over the First version More downforce 9…
Vidéo visible sur mon compte Instagram, TikTok ou Youtube https://www.instagram.com/reel/CpFT0BGDl5Z/?utm_source=ig_web_copy_link Goku en mode super saiyan, sa première véritable transformation, apparue lorsque Freezer a tué Krilin, son…
This is a Diffuser for an RC car (optimized for HPI RS4 Sport3). With this Diffuser, you can increase the downforce of your RC car to enhance the cornering speed. (STILL IN PROGRESS!) Use Brim to print Print Settings Printer brand:…
Vidéo disponible sur mon compte => https://www.instagram.com/reel/Co2kOvpjDK8/?utm_source=ig_web_copy_link Illusion d'optique d'un chat Maine Coon, by Art3Dchoix Imprimable en 0,2mm / Vitesse lente pour la première couche Vous pouvez le…
This is a simple door shelf divider for a Whirlpool WRT318FZDM fridge. It has a clip-on design and comes in two sizes (112x35mm and 112x50mm). Printing instructions Choose the size you'd like Print as-oriented in the .stl file (writing…
NEW concept de Lithophanie Couleurs par #Art3Dchoix ZELDA Lithophane Maker Color Sublimation concept by Art3Dchoix Tutoriel disponible sur Instagram https://www.instagram.com/p/CtUXcQqARTd/ ☝avec une seule bobine 3D par exemple une…
A friction fit case for the following cheap web cam: https://www.aliexpress.com/item/1005008262694281.html I'm cheap so didn't want to pay over the odds for such a simple thing. £6.50 is McDonalds money…so join me in my budget friendly…
Remove Factory plate. Designed for this 80mm Fan ( https://www.temu.com/goods.html?_bg_fs=1&goods_id=601099513088604&_x_sessn_id=9j9vhbawp3&refer_page_name=bgt_order_detail&refer_page_id=10045_1712086436967_6zqkulug36&refer_page_sn=10045…
Vidéo visible sur mon compte Instagram, TikTok ou Youtube https://www.instagram.com/reel/CpTFUlIjNQv/?utm_source=ig_web_copy_link Goku en mode super saiyan 3, sa première véritable transformation, apparue lorsque Freezer a tué Krilin, son…
GEPRC Smart35 o4 lite holder angles 25° and 30°. Screw in the 4 screws. The visible photo is of an older less optimized version. Update: newmodels with a cutout.
A fan shroud to incorporate a sheet of carbon filter. Filter material is readily available on Amazon. I installed 4x M3 brass heat inserts and used the factory screws that hold the original fan shroud on. If you do not have brass inserts,…
I have created these few, lets call it science icons as form of relax at 3d modeling :) Of cource, the title “Science icons” only the title and it is only general naming. I can imagine a wide range of usage of these 3d models. As for…
🔸🔸🔸🔸🔸🔸🔸🔸🔸🔸🔸🔸🔸🔸 Guide pour l'impression 🔸🔸🔸🔸🔸🔸🔸🔸🔸🔸🔸🔸🔸🔸 Format 200x133x3,07 Première couche 0,16 couches suivante 0,08 Remplissage 100% bordure : oui (pour éviter que ça se décolle) si tu n'utilises pas le fichier 3MF prévu pour bambulab…
The source marked this model as adult content.
A light weight mount plate for a HD camera on the Smart35 frame.
SALUS RT310TX Room Thermostat Support Print time : 1 h 30 m Material : ±30 grams Made with Tinkercad
Allows to use BNC connectors with Retevis RT3S and protects SMA connector from wearing out (SMA connectors have limited number of connection cycles). Printed from PETG. No supports needed.
Light version with reinforcements on the narrow strips in the front and back. Tilted at a 20° angle.
illusion d'optique Stitch Lover By Art3Dchoix Vidéo visible sur mon compte Instagram, TikTok ou Youtube https://www.instagram.com/art3dchoix/?hl=fr Imprimable en 0,2mm Vitesse lente pour le STL du Stitch 3 fichiers STL à assembler après…
I cant find antenna mount for Geprc Smart35 frame so i do my own. I upload fusion360 project so anyone can edit it by ow
This is a slide in router wall mount for the belkin rt3200, a very inexpensive and popular router for openwrt. It's a vertical mount, so the router either slides in right side up or upside down. It would work sideways also, but the router…
DJI O4 Pro camera mount for the GEPRC Smart35. This mount is to be used with bumpers. This solves the problem of the new gyro of the DJI O4 Pro
Supports for mounting the front soundbar of the Sony HT RT3 or RT4 5.1 audio system under the counter. Each piece has 2 M4 holes on the top. I used 3 pieces to distribute the weight of the soundbar as evenly as possible and a double-sided…
Keep your Retevis RT3S safe, organized, and always ready with this custom 3D-printed stand. The design holds the radio upright, making it easy to view the screen, access the keypad, and keep your setup tidy. ✔ Works perfectly with the…
This is a custom 3D model of part 383273, designed as a replacement gear for repair or DIY projects. The model was created from measurements and references to closely match the original part’s dimensions and functionality. It is suitable…
Keep your living space organized with this sleek and sturdy wall mount designed for remote controls. This model is optimized to be lightweigt to save filament, yet strong enough to hold your remotes securely. 3 Versions included: -1:…
Support for the DJI 04 Pro antennas on the GEPRC Smart35
I noticed that my minifridge had spaces for 3 additional soda shelves, and thought this would be the perfect use of 3D printing. The minifridge is a Hisense RT33D6AAE 3.3 Cu. Ft. Compact Refrigerator. The fit is snug, but not overly so.…
The source marked this model as adult content.
Just a scaled up version of RT3D 's Magigoo holder so it can hold a bottle of Layerneer Bed Weld . I just used some slightly bigger screws I had laying around. Printed in PLA. I think both products are excellent - make sure to go and…
Hey everyone! Today, I present to you the retevis RT3S radio mount. I designed it for myself and am still developing it. Of course, I welcome your ideas and suggestions! I printed the whole thing from PETG material and had no problems…
Support for the GPS Flyfish micro M10 for the GEPRC Smart35. To put on th top of the top plate
This the new version of my Moonlight camera mount for the GEPRC Smart35
Print two of these. These are to be used with Belkin RT3200 installed upside down, suggest using double-sided 3M tape.
Here is my Desert3DPrinting keychain that I designed.
Thumb pro mount for smart 35..
Printed on ender 3 pro with sprite pro direct drive extruder using tpu with shore hardness of 95. Using vase mode. https://business-lounge.heidelbergengineering.com/ch/de/products/hrt3-rcm/hrt3-rcm/gallery/
Sony HT-RT3 Home Cinema Bar Standoffs
Support pour la camera Walksnail Moonlight afin de ne pas voir les hélices
Easy to print motor covers to protect your motor shaft during long travels. Fits stock 1404 motors Printed in TPU - 20-25% cubic infill
Cricut adapter for papermate RT300 Inkjoy pens. Remove rubber grip to insert oen in adapter
I redesigned the original as I wanted to use the Zed axis USB mod and the original wouldn’t fit with it (stupidly I only realised this after I printed it and realised it needed a cut out for the USB mod. I used Onshape by just measuring…
Pretty much the title, simple feet to fit onto original Qidi Xsmart 3 feet. Springy shape to reduce resonance to surface below. The front right corner has annoying plastic part next to the feet, hence the cutout version. Other three can…
I tried installing the original version and after 10 minutes had not gotten it in. I decided to add a long nose piece to aid in pulling the the locking piece into the case. Worked perfectly with a pair of hemostats then cut it off with a…
I designed this modular top lid riser because I couldn’t find anything similar for my setup. It’s my first self-designed part in Fusion 360 , so it’s not perfect yet—but it works well for me and I’m happy with the result. The main idea…
vor dem drucken in einer Farbe Gründlich Filament in der Farbe durchlaufen lassen mit der ihr später druckt sonst schaut es aus wie bei mir.Habe es mit ein Anycubic Kobra 3 gedruckt.
Alternative lid for Raspberry Pi 3 Wall Mount Case - RT3D. Version with and without ventilation holes are included. Loose fitting design.
This is a holder for the Retevis RT3S and the Arrow Antenna. It slides right into the boom where the handle is.
Haltebolzen (Ersatzteilnr. 2752163500) und Scheibe (Ersatzteilnr. 9020115239) welche als Orginal nicht mehr Erhältlich sind oder zu Wucherpreisen gehandelt werden. Gewinde des Bolzens sollte nachgeschnitten werden. Schichthöhe des Bolzens…
Printed on ender 3 pro with sprite pro direct drive extruder using tpu with shore hardness of 95. Using vase mode. https://business-lounge.heidelbergengineering.com/ch/de/products/hrt3-rcm/hrt3-rcm/gallery/
This the new version of my Moonlight camera mount for the GEPRC Smart35
I designed this modular top lid riser because I couldn’t find anything similar for my setup. It’s my first self-designed part in Fusion 360 , so it’s not perfect yet—but it works well for me and I’m happy with the result. The main idea…
Keep your living space organized with this sleek and sturdy wall mount designed for remote controls. This model is optimized to be lightweigt to save filament, yet strong enough to hold your remotes securely. 3 Versions included: -1:…
Support for the DJI 04 Pro antennas on the GEPRC Smart35
Alternative lid for Raspberry Pi 3 Wall Mount Case - RT3D. Version with and without ventilation holes are included. Loose fitting design.
This is a custom 3D model of part 383273, designed as a replacement gear for repair or DIY projects. The model was created from measurements and references to closely match the original part’s dimensions and functionality. It is suitable…
Mini toy sci-fi spaceship inspired by, and somewhat in the style of the Astro Mini's space exploration themed mini toy series, produced by Bruder in West Germany in the 1980's. This spaceship features three swivelling turbofans, as well…
no usar soportes en el interior o hara agujeros en el vestido por detras. solo necesita soportes en las manos.
Lockable Oukitel RT3 PRO motorcycle holder. Designed for easy printing. Fits directly to Garmin AMPS mounting holes. You need this lock: DBS8 Winterhoff 6.5.2026, made some fixes to the models. Please redownload.
Généré avec le logiciel HUEFORGE mais revisité avec le Slicer BambuStudio par #Art3Dchoix https://www.instagram.com/p/CuJX1NJA5ly/ Taille du print : 180mm x 121 mm en 25 Layers “Simple à imprimer” Voici un des tutoriels disponible :…
🌺 🖤 🌸 Goldorak revisité en 3D PAINTING 🌺 🖤 🌸 Print de #goldorak avec la méthode de #3DPainting =========================== NON ici pas besoin de #hueforge Modélisation #art3dchoix ========================== Taille du print : 150mm x 150…
