Collapsing Katana, Naruto,sword,katana
katana s desingem Naruto
- Downloads
- 12,501
- Likes
- 485
- Rating
- 3.7
1,584 models
katana s desingem Naruto
Have fun :) Both Versions 3 Wände / 3 Walls 15Infill Bambu also 2 Colors or other Printers with Break :) Regards
This is a small not perfect to scale version of a brute trash can. You only need supports for the arms. I have now designed a lid that can be found here https://www.printables.com/model/229349-brute-trash-can-lid
This variation is slimmed down to make printing easier. No other changes the original was great.
This is a remix of the fivesixzero's Case for Flipper Zero Wi-Fi Module to use it with Ruthex M2 threaded inserts and M2 screws instead of M3 screw + nut. The screws needed are M2x7mm. I also made a version with the Marauder Skull logo on…
I printed my model with super quality on Cura. Infill density - 20%. Infill pattern - Lightning. Shell thickness - 1.2 and 0.84.
Make your keys prettier with this Akatsuki keychain
Give yourself a couple of nights off, break a leg. Stool is 20% scale of https://www.printables.com/model/168889-mammut-stool-ikea by hesam. Plaster cast needs to be scaled to about 97% for elves without feet.
Discover the ultra-detailed 3D model of Naruto, expertly designed and crafted for 3D printing enthusiasts. This Naruto 3D bust, brought to you by ArwgLacyProgramming , is support-free, meaning it can be printed with ease on nearly any 3D…
After printing, carefully heat with a hair dryer and bend to fit.
Kunaï Naruto anime style (full size 320mm) + 3 mm diameter pins (Please note attention that some pins have to be cutted to fit properly) Printed with ABS so this can be glued and smoothed with aceton. Shelf has been added for a good…
I love the pencil cup an upsized it to Fit a 355ml/12oz can. I've printed TPU and PLA at 10percent infill successfully. For those that are always being told thier drink is trash.
En Naruto, el Kunai se usa casi exclusivamente para el combate. Pudiendo servir como arma arrojadiza, arma cuerpo a cuerpo e incluso para fabricar o formar parte de trampas ninja. Debido a su aerodinámica forma, este arma siempre golpeará…
Enjoy my design of the Kunai used in the anime Naruto! I've looked through numerous sites for a Kunai file that looked accurate to the anime and was comfortable in the hand. Granted, any designs in cartoons/anime will vary from episode to…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Naruto inspired, Gamabunta , Tabletop DnD miniature with or without 25mm medium base which can be used for DnD and…
Prusa Affiliate link: http://www.prusa3d.com/#a_aid=3090 Feel free to check out my website https://www.ar3dprints.com/ All print information is included in a txt file. Hope you enjoy!
High-quality images here: https://imgur.com/gallery/cS9WAbK Welcome to the Brutus 3D Printer Project Page! Welcome to the Brutus 3D Printer project page! This is the Brutus 3D printer, my second 3D printer (check out the Bonsai 3D…
These are coasters of the various (canon) eye dojutsu from Naruto and Naruto Shippuden. You can pause the print at the desired height using your slicer so that you can swap out the filament color to get the look as seen in the pictures.…
Based on the Kurama figurine as seen in Boruto (screenshot below), this little nine-tail fox demon is a print in place, with supports. I printed in orange PLA and painted with acrylic paints.
And this cool one on the MiniFactory created by Happy Mask https://www.thingiverse.com/thing:2487189/files https://www.myminifactory.com/object/3d-print-anbu-black-ops-mask-naruto-19068 Print instructions Category: 3D Printing
Gameplay Read this before print FGC-6 BL Build Guide (kinda same insde) https://drive.google.com/drive/folders/15SvCfW1mlzBUXig3GxGxABcySOkj-8_E file too large you cant open in web , you need to download if yall have experience built…
I have put together a small selection of rod holders for fishing here. The shapes are inspired by some I have found on the internet or use myself. The holder is currently designed for a 10 mm aluminium tube. The EASYPRINT version can be…
Kurama but 11 Tails from Naruto as Funko pop
Support: Yes En arbol recomendable
This is a remix of jumpshoutmedia`s excellent Super Struts support for the Creality Ender 5. This was already a brilliant thing but I tweaked a few details to make the installation a little easier. In this remix I have: 1.Included nut…
Silhouette gatto da incollare sopra l'interruttore della luce, simpatico per abbellire casa per gli amanti dei gatti, in tre differenti posizioni. Ho inserito anche il g.code di tutti e tre con un unica stampa.
I made the Z-axis support strut shorter so that the squash ball feet for MINI can be mounted outwards at the very front right. https://www.prusaprinters.org/prints/34936-prusa-mini-squashball-feet-low-profile-noise-reduc/comments
Video on link below: https://www.youtube.com/shorts/nB45NfZYtHE A 2D Model of Itachi from the anime Naruto. Colored the model with permanent markers since I don't have multi material print. I put adhesive on the back of the model and…
Mount for Teltonika RUTX routers e.g RUTX50
Naruto Shippuden cookie cutter set. Printed with a 0,4 mm nozel and 0,2 layer height. Its a 2 piece item, one for cutting the cookie dough and one for modeling . Best to print with 100% infill if you have any ideas or requests of some…
Just pause and swap or use a MMU to change filament colors.
The model can be printed with supports or vice versa without supports, but in this case the inscription did not print with enough detail, so I chose to print with supports. If you want a nicer top layer, I recommend turning on “ironing”…
For dual color switch filament at layer 18
This is designed to snap-on a 2040 extrutions, like used in the Bear Upgrade for the Prusa Printers
Glorbo is closely related to his 3 brothers, his 2 biological brothers are Bombardiro Crocodilo and Crocodil*o Pe*isini, and his adopted brother is Bombombini Gusini. His 3 cousins are Gorillo Watermellondrillo, Chimpanzini Bananini, and…
---------------- the parts list and the documentation to get started can be found here the link to the new manuals can be found here https://drive.google.com/drive/folders/1cR-nfubPEXCrr6-0PsUFC_jSHIq18V4U?usp=sharing ---------------…
Based on GDM Originals amazing caricatured model, I assembled and created this headphone stand of Dwight Schrute from The Office TV Show so you can keep your headphones in a safe head, I mean… look at him: The stand has a firm and thick…
Enjoy my model of Naruto's logo! For more logos : +100 World famous logos (+DXF) par Referentiel | Téléchargez gratuitement un modèle STL | Printables.com
A 1:48 Scale 33 Gallon Rubbermaid Brute Trash Can
This is model of Kunai - throwable cold weapon depicted in comic series Naruto. There are two models - full, which is actual model of the Kunai, and half, for easier print. print it twice and glue together. There are no special…
Llaveros inspirados en el anime Naruto, perfectos para imprimir en varios colores.
I want to thank you for choosing to embark on this journey! I started this project as an experiment to see how far you can take a mainly 3D printed CNC router with inexpensive components, the result is hopefully what you will soon enjoy!…
A small collection with Saringan used by the Uchija Clan in Naruto Series. Can be used with a 8x3 magnet in the center. The design is two different Height, so can be used in MMU with two colors.
This file is a 1:1 recreation of a 13/16-in Square Strut End cap from Lowes meant for a CAD model, and is not optimized for 3D printing. I had best results printing this model out of 95A TPU and leaving many of the supports on.
Just a couple of Naruto themed keychain! The cloud and the Uchiha crest can be stopped at layers to color swap. The Uchiha crest red and white parts are at different heights too so you can get in multiple colors. Leave a like if you…
easy to print in one color hope you download enjoy
The wall mount is designed to keep the router securely in place, in my case in a camper van. Compared to the model I remixed this from, this mount uses much less material therefore prints much faster and is designed as a snap-on: a tab…
Check out this youtube video: https://www.youtube.com/shorts/vqTyxWd83uU A free standing Model of Kakashi from the anime Naruto. Colored the model with sharpie markers since I don't have multi material print. I converted this 2D drawing…
Funko pop Jiraiya from Naruto
Hier habe ich einen Würfelturm in Form einer Rutsche konstruiert. Die Rutsche lässt sich auf einem Bambulap P1P bei 0,2mm Layerhöhe ohne Support drucken, welches die Druckbarkeit enorm vereinfacht. Zeigt mir eure Drucke gerne in Form…
A 3D printable MSN Icon / Frutiger Aero buddy! It makes a great gift for anyone who enjoys the Frutiger Aero aesthetic.
This is model of Shuriken depicted in comic series Naruto. There are two models - full, which is actual model of the Shuriken, and half, for easier print. print it twice and glue together. There are no special recommendations for print,…
Drawstring beads with the Akatsuki symbol. 3 hole sizes - 4mm, 5mm, 6mm. If you need other sizes, drop a comment and
Geometric Woman with Hammer – a modern 3D printed sculpture symbolizing strength and precision.
Should be printed on finest possible layer height because it is 1:200 scale, I used 0.08mm on Bambu Lab X1C and it worked well. You can try printing without supports I used them because I dont trusnt my printer with high overhangs. After…
Simple bookmark with symbol Akatsuki from anime Naruto.
Hello ! I created simple but reliable cable clip clamp for cable of coil to metal detectors. Dimensions are 6 mm cable and 20 mm shaft. Usable for upper (aluminium) shafts of all metal detectors with that dimensions. I use that cable clip…
The different parts are attached to print in colors
The Soul Jam Stolen From The Cookie of Deceit. Also I Guess It Also Is Currently Owned By The Cookie of Truth. Hope Ya'll Enjoy The Model! -Eevee ( Ps. ) I WILL Be Eventually Making All of The Soul Jam(s?)! Hope Ya'll Look Forward To Those!
Gridfinity small bin for ruthex Threaded Insert Tip. Printed with Bambu Lab X1C in PLA, 0.2 layer height. The Bambu Lab .3mf file is attached. Also a Fusion 360 file.
The model can be printed with supports or vice versa without supports, but in this case the inscription did not print with enough detail, so I chose to print with supports. If you want a nicer top layer, I recommend turning on “ironing”…
Based on the design of CNC Kitchen I have created a foldable box for the Ruthex insert set. The set can be printed without supports. After printing the small supports under pins have to be removed. The sets by supplier:…
The speed will depend on the machine and the type of PLA you are using. I always recommend that the first layers be printed at a speed between 10% and 20% (although if you are confident and know that the bed is perfectly leveled, you can…
it is just a bunch of cool stuff
Phone stand with the sign of the Hiden Leaf Village. If you place it on its side you do not need support.
End Cap for 12GA Half Slot Channel Strut. Designed custom and printed in PLA as a press-fit compared to https://www.lowes.com/pd/Adamax-1-5-8-in-Square-PVC-Strut-Channel-End-Cap-2-Pack-Cover-and-Protect-Metal-Strut-Ends/5002818225 For…
This model can be printed without supports or rafts.
easy to print in one color hope you download enjoy
This is a crutch for a Barbie, the measurements are based on the basic model of a Barbie (the cheaper ones), however there are two versions of the base crutch, one for the barbies that are taller and a shorter version of the crutch for…
A great Wall Art of Naruto. Do not forget to upload your makes and LIKE the model, thanks ! As it is very thin and tricky, I am not sure it can be easily scaled down, do it at your own risks ;-) Inspired by a sticker
Diseño Conceptual El diseño de la figura de Sakura está inspirado en el popular anime y manga Naruto, capturando a la perfección la apariencia dinámica y carismática del personaje. Uso Esta figura es ideal para coleccionistas de anime,…
Vidličky na rybářské pruty. Fishing rod rest.
AKA “Hidden Belts Mod” AKA "LR3 Superstrut-encased Y belts" New v2 for LowRider v4: NEW as of October 6, 2023: now either or both Y belts can be hidden. Initially I only hid the Y-max belt (non-rail side) as that's the one I really needed…
Ford Fiesta MK5 Suspension top strut mount & bearing Cup/Cover For Ford Fiesta MK5 facelift (2004-2008) Left and Right version (Different) Print Settings Supports: Doesn't Matter Resolution: 200µ Infill: Min. 50% Filament: ABS/PETG/ASA
Recommended Height 150mm Design Concepts This model of Temari from Naruto captures her iconic look and pose, featuring detailed attire and accessories. Purpose Ideal for fans of anime and specifically Naruto, this model serves as both a…
This is a lid I designed to go on top of my brute trash can model found here. https://www.printables.com/model/151879-brute-trash-can-pen-holder . It is designed to be printed without supports.
itachi uchia funko pop style
Source: https://www.models-resource.com/pc_computer/narutotoborutoshinobistriker/model/46516/
A simple GoPro mount I made to better (more securely) fit the profile of my M/L Sweet Protection Strutter. Most likely usable for other helmets (duh) but make sure you have tethers and such, as I'm not responsible for your camera. I…
A great Wall Art of Naruto. Do not forget to upload your makes and LIKE the model, thanks ! As it is very thin and tricky, I am not sure it can be easily scaled down, do it at your own risks ;-) Inspired by a sticker
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
Arte mural de Naruto Obito/Kakashi
I designed these skid plates to help protect the Pro-Line Brute body on my Traxxas X-Maxx. Printed from Ninjatek Armadillo TPU, they are very abrasion resistant and strong. *Note: these designs ARE NOT PERFECT. You will need to do the…
I want to thank you for choosing to embark on this journey! I started this project as an experiment to see how far you can take a mainly 3D printed CNC router with inexpensive components, the result is hopefully what you will soon enjoy!…