2,524 models
This bookmark features the leaves and flowers of the tradescantia , which is also known as the wandering jewel, inchplant, or dayflower. (I think it's probably tradescantia zebrina .) I originally designed this as a gift for my friend ,…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
Recommended material PLA Print settings Layer height = 0.2 For PET reflective film markers ϕ=10mm (6mm dot) https://www.aliexpress.com/item/1005007012274939.html?spm=a2g0o.order_list.order_list_main.5.68971802SpDi3O
Print approx. €1.51–€1.85 excl. taxPreliminary estimate for one variant
The Boeing Insitu ScanEagle is a small, long-endurance, low-altitude unmanned aerial vehicle (UAV) built by Insitu, a subsidiary of Boeing, and is used for reconnaissance. this is my first 3d model of something that flies, is still WIP.…
Print approx. €5.79–€7.08 excl. taxPreliminary estimate for one variant
Holding frames to convert analog film media with a (D)SLR Get your beloved media to the digital age. Stuff you need: SLR Macro lens Flash (recommended) These parts are optimized to get the highest possible conversion quality. The lens…
Print approx. €0.66–€0.80 excl. taxPreliminary estimate for PETGSource material: PET
Allow your treasured handbag to take a break in style with our beautifully crafted Portable Purse Holder Hanger Hook. Perfectly designed for use on any table or surface, it keeps your purse handy and clean while enhancing the aesthetic of…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
Scandinavian Nativity Scene Blacksmith The Bible doesn't mention a blacksmith at the birth of Jesus, so why is he there, hammering away next to the shepherds and the Magi? 1. The Power of "Everyman" The Nativity scene tradition,…
Print approx. €5.98–€7.31 excl. taxPreliminary estimate for one variant
I shoot a lot of Instax, especially now that I adapted a LomoGraflok back to my Graflex SLR, and I like to scan the film for sharing or before giving away the unique physical copies after shooting portraits. I designed this frame to save…
Print approx. €1.58–€1.94 excl. taxPreliminary estimate for one variant
After a dozen scanning attempts, several hours of tweaking settings, and adjusting the mesh and model, I finally achieve “Good Enough” status. Not perfect. Not awesome. But printable, and maybe someone can do something with it. I printed…
Print approx. €6.24–€7.62 excl. taxPreliminary estimate for one variant
The original model was available thanks to the University of Dundee Museum Collections. Original scan available here with CC0 Public Domain license: https://sketchfab.com/3d-models/brown-bear-skull-e01dc94d20df4b888c7a6979bffb45a9 This…
Print approx. €7.00–€8.56 excl. taxPreliminary estimate for one variant
Spotify code of your favorite song. Scan it.
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
The 'Scandic Prism Vase' is a creation inspired by Czech glass design, interpreted with Scandinavian simplicity. This piece, composed of 740 3D-printed spikes organised into 37 rows of 20, takes its cues from the geometric precision found…
Print approx. €13.96–€17.06 excl. taxPreliminary estimate for one variant
Here's a smoothed scan of one of the Chicago Art Institute Museum Lions I made for an assignment of the 2021 cycle of Fab Academy. The work behind this file is documented on my assignment page, linked below.…
Print approx. €5.50–€6.73 excl. taxPreliminary estimate for PETGSource material: PET
The Scandic Lamp is a downloadable 3D model that brings a slice of Nordic simplicity into the realm of 3D printing. The design features a cylindrical shade that is just 0.4 mm in thickness, presenting a unique challenge. The thinness,…
Print approx. €3.01–€3.68 excl. taxPreliminary estimate for PETGSource material: PET
Hellenistic Etruscan Cinerary Urn from the late 3rd century B.C., currently housed in the collection of the Museum of Fine Arts, Boston. Crafted from polychrome painted limestone or travertine, it serves as an elaborate ash chest created…
Print approx. €15.60–€19.07 excl. taxPreliminary estimate for one variant
We ordered the scanners and the bases, but bases were backordered with ETA 6 months out, so we designed our own. Use 0.15, PETG, black or any other colour you like, in fill 100% to make it strong as possible. Its beet working for about 1…
Print approx. €1.27–€1.55 excl. taxPreliminary estimate for PETGSource material: PET
Modelo creado para una empresa de fotografía como detalle al entregar las sesiones navideñas junto con una placa con logo, Perfecto para decorar el árbol de navidad. Impreso en MK4S con MMU3 utilizando una boquilla 0,4 ( con 0,25 queda…
Print approx. €4.60–€5.62 excl. taxPreliminary estimate for one variant
This mount will work on the steering column plastic (Toyota or similar shape) for a Scanguage II. Confirm works on a Toyota MR2, Matrix, and Vibe.
Print approx. €0.55–€0.68 excl. taxPreliminary estimate for one variant
Manufacturing instructions: Material: PETG 3D Printer: FDM 3D printer, average print time 20h (input shaper enabled on MK4). Slicer settings: 0.2mm layer height, 4 perimeters, no supports, legs are recommended to print in vertical…
Print approx. €6.29–€7.69 excl. taxPreliminary estimate for PETGSource material: PET
sometimes a magnetic marker is usefull to don’t waste reflective markers and reuse them. print with support and ironing on surface for best results. Files: -single marker support -50x marker support Markers: Outer diameter 10 mm inner…
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for PETGSource material: PET
Scangrip Halter für Manfrotto Leuchtenstativ - Hält Nova R bis Nova SPS 6 Wird lose aufgesteckt. Die Leuchte wird eingehängt und kann gut verstellt werden. Nova R hält am besten, da der Bügel gummiert ist. Fotos zeigen Nova R und Nova SPS…
Print approx. €2.89–€3.53 excl. taxPreliminary estimate for PETGSource material: PET
Für meine Plugin Festivals Kühlbox (Alpicool) gibt es den Akku nicht mehr. Hier ein Adapter für die 12V 8A Akkus von Scangrip. Es wird eine Feder 8x15mm und ein Stift 4x12mm benötigt. Die Kontakte sind standard Flachstecker 6,3 aus dem…
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for PETGSource material: PET
I made this box to keep my playing cards organized. Box Measure 94x64x23 mm Toscane cards pack measure 89x59x18 mm -- feel free to ask me for a modified box of different size
Print approx. €3.36–€4.11 excl. taxPreliminary estimate for one variant
Ein Klebebandabroller mit meinen DIY 3D-Scanner abgescannt Print Settings Printer: Creality CR 10S Pro V2 Supports: Yes **Infill:** Würfel Filament: Renkforce PLA Category: Scans & Replicas
Print approx. €5.15–€6.30 excl. taxPreliminary estimate for one variant
Card Slinger 3.0 for MTG / ManaBox App- Easily scan in bulk quantities of cards by hand - Now for sleeved and un-sleeved cards You MUST print the base and insert in transparent or white filament, it will not work properly otherwise.…
They come in many different shapes and forms. Can be equiped with 4x2mm or 6x2mm round magnets in order to have them stick to metal parts (like on cars) or to stick to each other. If you have no magnets, the marker works fine without. The…
Simple scan of a ps5 controller I took so I could model some stuff. Thought others might find it useful.
Finally, there is a website, where I will bundle all the information on the 3D Scanner, feel free to visit http://www.openscan.eu Scanned with my DIY 3D Scanner and processed in MVE, for more details on the scanning process and the…
After buying a Einscan-SE this was the first thing I scanned. a random buddha statue my wife owns. The details this thing got is amazing. Be sure to tune your support settings well. Print instructions Pretty can do anything with this.…
Whole piece has slightly more flexion in the pinky than the split up version. Either one will need supports. Peg was designed for printing the model at full size. Base is if… I dunno, you want to remix into a lamp or something.
This is a high resolution scan of an antler off of a deer. It's about 12" wide by 17" tall but it can be scaled to fit your printer. I tried to set the scan in a good position to print, but some adjustment will be necessary. A great trick…
Photogrammetry made out of 46 Photos from my own model of Minas Tirith the legendary city out of the Tolkien Universe as shown in the Movies The Lord of the Rings. 1st Try of making a 3D-Model with the photogrammetry program - so it's far…
3D scan of skull found on the Battle of Visby, where on 27th of July 1361 the Danes fought Gutnic Peasants. The human skull found at the Battle of Visby is a grim reminder of the brutality of medieval warfare. The skull shows clear…
This was a 3d scan of a figure from the game assassins creed.
A simple, easy-to-print, retro-style 35mm film holder for DSLR scanning or negative viewing. The included registration posts make it easy to align when gluing and assembling. Please post your make. Enjoy File "35mm_Film_Holder_NG.stl" has…
Some variants of differently shaped magnetic markers for 3D scanning. The provided STLs are made for disc magnets of the size 10 x 3 mm and do need a pause command to manually insert them during the print (the 3MF file already includes…
Finally, there is a website, where I will bundle all the information on the 3D Scanner, feel free to visit http://www.openscan.eu Scanned with my DIY 3D Scanner and processed in MVE, for more details on the scanning process and the…
Xbox Controller - 3D Scan Use to Create your own custom Controller Stand
Giganotosaurus scanned with revopoint POP3 Plus and printing resin
This is yet-another-calibration tower, with several tests for overhang/bridge performance, but also other tiny features that I think represent common use cases in detailed 3D printing. One of the things the Bambu X1/X1C/P1P printers…
This is a model of my brain, as extracted from an MRI scan. It's a bit smooth on the back (lol), but from what I can gather online, that's an artifact of the MRI scan. This is definitely on the trickier side to print, I chose to split it…
As the title states, these are scan markers for 3D scanning primarily used in Structured-light scanning. The embedded magnets are interference fit while the markers are applied as stickers on all 5 sides. BOM 10×3mm Rare Earth Magnets…
Finally, there is a website, where I will bundle all the information on the 3D Scanner, feel free to visit http://www.openscan.eu Scanned with my DIY 3D Scanner and processed in MVE, for more details on the scanning process and the…
Scania R730 model RC wymaga klejenia i zaopatrzenia się w śruby m3 różnych długości. W razie problemów z włożeniem tapicerki do kabiny można z niej zrezygnować. Łożyska 6700 ZZ
This a 3D scan/model of the Oculus/Meta Quest 3. These 3D models are very accurate and you can use them to make accessories for the Oculus/Meta Quest 3, print them, or do whatever you want with them. If you would like 3D models to use to…
A reupload of the excellent 3d scanning platform by Bribro12 on Thingiverse. Fully 3d printed, hand crank rotating platform. The model I've uploaded is scaled up to basically fill out the bambu build plate completely.
Introduction This is a functional print that helps you finally digitize those 35mm film negatives - old family photos and recently developed rolls alike. The main component consists of a frame with a print in place mechanism for advancing…
Finally, there is a website, where I will bundle all the information on the 3D Scanner, feel free to visit http://www.openscan.eu Scanned with my DIY 3D Scanner and processed in MVE, for more details on the scanning process and the…
3D Scan of the Sony Dualshock 4 Game Controller
This 3D model serves as a torture test for any 3D printer, assessing its capability to print steep overhangs without supports. Specifically, this model features a 75-degree overhang. It is designed for printing without the need for…
I needed some marker setup my Revopoint POP 3D Scanner is able to pick up better than flat one on the turntable. Come up with these minimalistic pyramid I put the scanning markers provided by Revopoint (10mm Diameter). Fast printed , very…
A simple but sturdy turntable that is turned by hand, used when airbrush painting or 3d scanning. It is 180mm in diameter. The two parts are screwed together with a 20mm long couter sunk M3 screw, The holes on the top part is two…
Suitable for color printing Outer diameter 10mm The inner diameter of the dot is 6mm Height 2mm Layer height 0.2mm Magnet with a diameter of 6 mm and a height of 1 mm (magnet holds without glue)…
3D scan of Thigh Bone Scan - Femur (Right) Thanks to the Institute of Anatomy First Faculty of Medicine Charles University for the possibility to scan this model. A collection of high-quality, anatomically accurate 3D scans of human…
The 285mm long Scania tractor model features steering and freely rotating front wheels. The model was printed entirely in PLA, with a quality of 0.10 and 0.15, depending on the size of the part. To add a touch of realism, we printed the…
I have been looking for a Bigfoot statue scan for so long which looks good, and matches the bigfoot statue at my local J&J's. @itsprestonm 's scan was the best I have found so far, but was a bit rough and unedited. I fixed it up a little…
The easiest way to start camera scanning. Do you have boxes of old negatives that you've been wanting to preserve but never got around to it? Are you tired of outdated, slow flatbed film scanners that take hours to scan a few rolls of…
The Wave Vase is a decorative vase featuring a fluid, layered wave design , created to bring a touch of modern elegance and Scandinavian style to any interior. Fully modeled in Blender , this vase blends organic shapes with controlled…
High quality scan of a small Ganesha statue from Ahmedabad, India. The Lord of Beginnings, to celebrate PrusaPrinters new model-sharing community platform :) Print instructions This model should print well on any desktop printer. It is…
Specs: These are high poly scans, the average poly count per mesh is about 2,500,000 triangles. NOTE: 3D scans aren't perfect, if light cannot hit certain parts of the object then the scan will contain 'Blobs' in those areas. These scans…
Another 3d scanned figure with height 10cm. check out my other scans and leave a comment. Cheers Scanned with my DIY 3D Scanner and processed in MVE, for more details on the scanning process and the (printable) 3D Scanner see:…
I made this to have a lower profile, more spread out helper. Helps not wasting the stick on targeting dots, sticking them on here instead and the become reusable. There is a 10mm extrusion on the underside for a neodymium magnet,…
These extensions are to support the mats for the Brother ScanNCut DX range. I recommend printing at 0.2mm layer height with 6 walls (to eliminate the need for infill) and also print with a brim as they are quite narrow. It's a quick and…
Produced with the awesome support from my Patrons! This is a 3D scan from a rock on Kitzbühel Horn. I used my mobile camera, snapped about 70 photos around the rock and then plopped them into meshroom. Excellent results straight from the…
A magnetic marker block kit for use when scanning objects with a 3D Scanner. A Truncated Icosahedron Block (Half-globe Shape) An Equilateral Pyramid A smaller Dodecahedron block A long rectangular bar with space for M6 male and female…
I wanted to print some small Bigfoot statues to give as gifts to friends. This is a quick unedited scan of a Sasquatch statue.
I remodeled the rotating platform of Rudniol ( https://www.thingiverse.com/thing:3278530 ) for better usability. The platform has a diameter of 15 cm. I eliminated the space between bottom and top part of the platform in order to minimize…
Description I wanted to design a catch-all tray that would not be limited to its functionality. Rather, the tray should catch the eye and be suitable as a decorative element, but at the same time be functional. Also it should be easy to…
Finally, there is a website, where I will bundle all the information on the 3D Scanner, feel free to visit http://www.openscan.eu Scanned with my DIY 3D Scanner and processed in MVE, for more details on the scanning process and the…
The original model from itsprestonm is pretty impressive, but it was throwing manifold errors on slicing and resolution was a bit low for me. I cleaned up the manifold problems, increase subdivisions and tried to add more details where I…
Photogrammetry skull. Can be printed on SLA and FDM printers. SLA model included with supports for resin printers, around 50mm in size. for FDM I recommend rotating the model so it prints with no support, or slice and print in 2 parts. If…
This film carrier provides great film flatness and smooth film feeding action while being quick to print and easy to assemble. This design is my attempt to improve on existing 3D printed film carrier designs, focusing on film flatness and…
A 3d scan of a replica of the ancient greek sculpture “Nike of Samothrace” also known as “The Winged Victory of Samothrace”, a masterpiece from the greek Hellenistic era (around 200 BCE). The original resides in Louvre, Paris. Scanned…
This is the very first raw test scan data done with a raspberry pi + camera and my DIY 3d printable photogrammetry rig. Everything is based on open soft- and hardware. So feel free to check out my website www.openscan.eu/?lang=en…
There is a free and paid version of this software 3D scanner. Since I released this free version of the program, I've put a lot of effort into creating version 2.0 of the scanner. It's only available in the paid version.…
Not printed, straight scan no clean up or smoothing, literally as it came from the scanner. just for reference to see what the scanner is like. Category: Scans & Replicas
Many things have changed over the years so please consult the most recent documentation on github: https://openscan-org.github.io/OpenScan-Doc/hardware/OpenScanMini/ The current printable files are organized and documented here:…
I made this test scan some time ago with a RangeVision Standard Plus 3D scanner. I added the original and a reduced version. https://www.3dwp.nl
3D-Scan einer Rose. Aufgenommen mit einem Infrarot Licht Scanner. Benötigt Supports
This will be an on going project of scanned portraits of makers from YouTube and Instagram. Download your favorite maker. Collect, modify and print them all. This project is made possible with assistance from Shining 3D and the Einscan HD…
System of objects for 3D scanner markers. All figures have shallow cutouts for 6 and 10 mm markers (8 and 12 mm cutouts). The cutouts allow the markers to stay in place longer, since they do not catch on the edge during storage. The…
These are hex balls or halves that create a ball. These work great in marker mode tracking for 3d scanners. Simply print a pair. Add marker dots, reflective ones are the best. Then place one 6mm x 4mm magnet into the whole at the bottom.…
This Venus de Milo model was made by Revopoint POP. If you want to get more models like this, please try to use 3D scanner POP: https://bit.ly/3xb37c3 The accuracy of Revopoint POP is up to 0.3mm. It's very suitable to scan sculptures for…
I had a vacation in Sintra Portugal. Took the opportunity to 3D scan a few rocks, mostly for fun. One of them turned out really great. The others, not so much. Anyway. Enjoy. https://www.myminifactory.com/users/terrain4print?show=store…
In 2018 I had fractured my left elbow. After getting checked at the hospital I asked the nurse if I could get the CT-scans (b&w cross section images). After some search I was able to find a software that allowed me to create a precise 3D…
This is a 3D scan of a rock, taken with an EinScan SE desktop scanner. The original rock is about 50mm in diameter. I decided to make the scan because the I thought the rock would look good at different scales due to the fine details and…
This is a rework of a 3d scan of the Virgin Mary a seen in Lourdes. Reworked a little. very cool in pop colors. A nice touch of grace in a cool deco. Printed in adaptative layers to be fast but very precise on the hand and face. Fast and…
it's just a scan, not optimized for printing
This is a model of a chicken nugget that i scanned and modeled in Blender. PRINTING you have 2 options how to print the mode, you can just print the “flat bottom nugget” or you can print the “nugget” model and use supports but i recommend…
Scanned with my DIY 3D Scanner and processed in MVE, for more details on the scanning process and the (printable) 3D Scanner see: https://www.thingiverse.com/thing:2755968 Finally, there is a website, where I will bundle all the…
Used my Revopoint Pop2 to scan this. Came out ok. You will need to rotate the model in your slicer and sink it into the bed to get a flat surface. This was just a test of the scanner, so I post processed enough to get the gargoyle nice…
from lack of a turn table with right proportions for 3d scanning i tried most of the designs but did not find them adequate for my needs. i wanted smooth movement right height for turning by hand stable not slipping on table first, i…
Esta peça esta no formato para Canhoto é necessário realizar o espelhamento para ser utilizado por destros. Utilizei as seguintes configurações na minha impressão: Preenchimento: 30% - Giróide Suporte: Sim (arvore) - Coloque a peça de pé…
This is a solid model of my right kidney created in Slicer.org from CT scan taken at Vanderbilt University 8/11/2022. This model can be used for any non-commercial purpose but attribution is appreciated. Timelapse video here:
This is a scanner stand for mobile phones. Cut a standard 25 mm PVC pipe to size, push it through the printed parts, lock the bottom part to the table using a bar clamp and you are done. Optionally you can put M6 nuts and bolts to the…
This dodecahedron can be used to stick reflective markers for 3D scanners to it. It's fully parametric when you use Autodesk Fusion. This was built with a free version of Autodesk Fusion hence the license that doesn't allow commercial use…
This amazing 3D scan was made by Oliver Laric: http://threedscans.com/lincoln/aphrodite/ I sculpted and remeshed the scan and scaled it. The picture above is of a 3D print made on our FlashForge Finder, the print was painted light gray…
3D scan of a bust of V.I.Lenin made with 123D Catch (discontinued)
YOUTUBE video showing the use of this 3d scanning frame: Improved LARGE version of my scanning frame v2 which is working great using RaptorX in parallel laser scanning mode. Motivation for designing this 3d scanning frame: Object can be…
