Egyptian Scarab Pendant
Egyptian Scarab Pendant.
- Downloads
- 2,464
- Likes
- 412
- Rating
- 4.92
224 models
Egyptian Scarab Pendant.
Prestar mucha atención a la calibración de la maquina y de ser necesario ajustar compensación horizontal (x y) Actualización!, agregue el archivo 3mf para imprimir directamente multicolor.
A fictional model of a scarab or dung beetle. Not a specific species just a blend of different beetles and my imagination. Check out my YouTube Channel ( Jimson's Stuff) where I make all sorts of things and also review tech including 3D…
I remixed this very beautiful egyptian beetle by Peter Farrell with the aim that it could print flat without supports in FDM. I took the opportunity to smooth the 3d model a bit. You can find the original model here Follow me on Instagram…
INNOVET SCARA Robot. <1000€ educational SCARA robot. Easy to build with easy to obtain parts in Europe. Perfect as a schoolproject. Not only the building of the robot, but the robot can also be used in many STEAM projects. Check the BOM…
Reuploaded from: https://www.thingiverse.com/thing:5366891 Scarab of Ammit from the TV series Moon Knight (Disney+) that can fold wings. Included two version, one with just the body and the wings so the wings can move freely (NO MODS) and…
modelo de escarapela argentina Inicia con colore celeste luego continua con color blanco y amarillo acepto donaciones link.mercadopago.com.ar/printable
The scarab beetle is a small model with a secret compartment which is accessed by pulling back a "drawer" and opening up the beetle's wing case. The box is locked by closing the wing case and pushing the drawer back into place. Another…
There are two versions, one with holes for magnets and a non-hole version as well. Printing with supports recommended with magnet version. Magnets used are 1/4" x 1/8" (diameter x width)
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon inspired, Meowscarada, Tabletop DnD miniature 25 mm medium base which can be used for DnD and other…
Traigo 3 modelo de escarapelas y 2 personalizables, cualquier cosa esta la instrucción y sino contáctenme por cualquier cosa Inicia con colore celeste luego continua con color blanco y amarillo y si pueden donarme lo que sea, trato de…
I have created a remix of an Egyptian scarab-shaped medallion, wherein I separated the gemstone from the scarab design, allowing for printing in two distinct colors. Additionally, I rotated the suspension loop by 90 degrees, enabling it…
─ Modélisation avec c4d ou Zbrush ─ ─ Contrôle sous 3d builder ─ ▼▼▼ MORE OBJECTS ▼▼▼ ►► https://cults3d.com/en/users/yiixpe/creations ◄◄ ☺☺ Thanks for the coffee ☺☺ https://paypal.me/yiixpe Print Settings Printer Brand: Creality Printer:…
Locomotiva Faur LDH 18, zisa si clasa 88 a fost produsa in peste 100 de exemplare la fabrica Faur (Malaxa) din Bucuresti. Acum orice modelist din Romania si-o va putea tipari 3D la o imprimanta cu rasina. Pentru asamblare va mai trebuie…
Files below are separated. I would not advise glueing on the ringlet, however I put the file there if you want. Any file under the PrusaSlicer category MUST be sliced in prusa slicer due to a negative volume modifier used to insert the…
Cortador y marcador para galletas, arcilla, barro... Personaje de dibujos Spiderman. Solo una impresion 2 piezas. Se imprime con una separacion, no hay que hacer nada.
This project start from a necesity of my wife. She is a teacher, she has a little student that cant see. So she need to different object to feel. So I found this file, https://www.printables.com/es/model/514261-coconut-shell Thanks to…
Automotorul CFPV. S-au fabricat 3 exemplare, la Astra Arad, inainte de al doilea razboi mondial, pentru o linie particulara de cale ferata din Romania. Si anume Caile Ferate Prahova Valeni (CFPV). Pentru utilizare comerciala sau va rog sa…
Máscara Keaton de la saga de The Legend Of Zelda, concretamente de Majora's Mask y Ocarina Of Time. Pronto habrá más modelos de máscaras de este juego y mi idea es hacer todas las máscaras de la saga completa. Hago encargos…
This mechanism is intended to be used with kinetic sand art enclosure: https://www.thingiverse.com/thing:5991171 or https://www.printables.com/model/475686-kinetic-sand-art-tabletop-enclosure Its motion is limited to the X-Y plane. This…
Escarapela diseñada originalmente para las fiestas patrias argentinas. También incluí archivos STL preparados para imprimirse en tres colores, como por ejemplo tiene la escarapela italiana. Además, subí los archivos originales en formato…
12-year-old Dafna Filshteiner found an ancient scarab amulet in Tel Qana near Hod Hasharon. Used stable diffusion to fix (assume) the missing edge. zoe-tiled-depth + Displacement in Blender after fixing picture. Used an old Scarab of mine…
This is a scarab amulet from ancient Egypt. The beetle is in the Smithsonian and the wings are in the British Museum. It's about 8cm (the scale in the stl should be correct). No supports or special printing settings necessary for this.
this has been made with a 20mm internal Diameter this is so small that it would be best to Print on a resin Printer Category: Fashion
Mascara articulada en la mandíbula para disfraz de terror
This heavy based organiser is stable in both orientations, and allows easy viewing, storage and selection of items. It was designed for lipsticks and eyebrow/eyeshadow pencils (hence the bright colours), but would work equally well as a…
LLAVERO MASCARA OBITO, DISEÑADO PARA IMPRIMIR EN MULTI COLOR SET COMPLETO : https://cults3d.com/es/modelo-3d/joyas/llaveros-de-mascaras-naruto-alexmtz28-2
Se imprimió en PLA ROJO y DORADO Impresora Creality Ender 3 s1 Soportes: Arbol Altura de capa 0.2
The motor is Mabuchi 010. Also you need M2 screws with nuts. Un automotor pe care sa il poata tipari 3D toti pasionatii din Romania. Daca aveti planuri de la locomotive romanesti va rog sa mi le trimiteti la [email protected] pentru a…
Print Tips Material: PLA Layerheight: 0.2mm (STRUCTURAL) Perimeters: 3 Infill: Lightning Support: No Paint Tips Plastic primer Turquoise acrylic paint Bronze wax paste
DESCRIPCIÓN DEL MODELO 3D Diseño personalizado para imprimir con el nombre del cliente. Las Fiestas Patrias peruanas son las celebraciones por la Independencia del Perú del dominio español. Oficialmente constan de dos días. El 28 de julio…
Very effective and easy to print sand mold with additional features! If not in use it can be flipped upside down and be used as a simple stand for our models or other things you would like to exhibit. Also in case of “emergency” due to…
Viaja al corazón de una de las civilizaciones más fascinantes de la historia con la Máscara Maya Ancestral , una pieza escultórica inspirada en los templos, símbolos y relieves del antiguo Imperio Maya. Su diseño combina formas…
necesita soporte es compatible para cualquier filamento rígido
The scarab beetle symbolized rebirth. It was placed over the heart when a mummy was wrapped in linen to ensure the soul would be reborn into the afterlife.
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Bandera Argentina, se puede utilizar como escarapela o imán. Impreso en PLA marca 3n3 Altura de capa 0.3 Nozzel :0.4 Temp Nozzel: 205 Cama: 60 Tiempo 40min Cambios de filamento capa 26 y 30 Soportes :no Balsa: no Impresora: Artillery…
Introducing the MPSCARA! UPDATE: This project is no longer being supported. A more-evolved version of this concept with a more active support team is available here . WARNING: This project is still a work in progress, we cannot promise…
This is a cover to place over a Magic: the Gathering card that has been reanimated as a token by the scarab god! It leaves the name, art, and rules text uncovered, but covers up and replaces the creatures type and power/toughness. The…
Crests attached to the left arm of Scarabia school uniforms. Flat pin back (available online or at your local craft store) is required to attach it to a sleeve. Ribbon is not included. Print in any color/filament type and spray paint gold.
Charms for Kalim and Jamil Models are 65mm in height. Scale them smaller for earrings or bracelet charms. Printed with photopolymer resin on an Elegoo Saturn.
This is a fridge magnet scarab based on the series moon knight on disney plus and is a donscaled remix of this design: https://www.printables.com/prints/205687-egyptian-scarab-of-ammit-from-moon-knightfoldable- . The magnet I used was a…
Insert for the board game Mascarade. This fits all the cards and reference sheets from the base game plus the expansion. You will have to remove the cardboard liner. The wall and floors are 1.2mm thick, and so can be easily printed with…
Automotor CFR 20.001 railbus la scara TT 1:120 Scale. Only for personal use. For commercial use contact me at [email protected]
Basicamente puse el clip insignia en PrusaSlicer, agregue el modelo como archivo de la escarapela y ajuste el tamaño, pinte colores y mande a imprimir. Puse como purga en el objeto que va debajo de la remera para ahorrar tiempo y purga…
¡Máscara Demoníaca Alada – Diseño 100% original! Pieza única creada desde cero: máscara de guerrero oni/demonio con grandes cuernos curvados, alas laterales extendidas, escudos frontales con símbolos grabados y detalles feroces en la…
Scaramush Nomad Gneshin Impact Statue
a scarab beetle I followed a tutorial to make it is not articulated or anything just a beetle but maybe someone will use it for something I have not printed it yet this is my way of learning to design 3d prints any constructive but polite…
Escarabajo Disney Aladín 1 sola pieza, con un agujero en el dorso para colocarle un imán de 2mm de diámetro. Se trata del mismo escarabajo de la película de Disney Aladín pero en vez de ser 2 piezas que se separan por la mitad, es solo 1.…
the scarameow cat from genshin impact
No support needed. Scale it as you wish. Cheers!
DIY Home edition of Mostly Printed SCARA. Print instructions DIY Home edition of Mostly Printed SCARA. I was very happy with MPSCARA from Thingiverse - https://www.thingiverse.com/thing:2487048 . So during COVID19 I made my own solution.…
Inicia con colore celeste luego continua con color blanco y amarillo acepto donaciones link.mercadopago.com.ar/printable Paypal [email protected]
Una mascara sonriente para disfraces o cosplay inspirada en el anime “Invasión en las alturas (tenkuu shinpan)” Dimensiones: 186mm x 123mm
Scarab 255 HO Impulse Wake Edition 2017 Wall Art Silhouette model. Adjustable size
EL ROSTRO DEL GUERRERO DEL NORTE La Máscara del Jarl Vikingo representa la fuerza, el honor y la resistencia de los antiguos guerreros nórdicos. Su imponente casco incorpora un protector nasal central, profundos grabados inspirados en los…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Blue Transmission Distance: 4 PLA+ Sunlu Red Transmission Distance: 6 PLA+ Sunlu Grey…
Fácil de imprimir e usar con >180 micras acetato Ayuda humanitaria para afectados por la DANA en Valencia Easy to print, easy to use with >180 micras PVC Remix from many other designs we saw on internet. www.ayudame3d.org
Ein Schutz aus TPU für die Tassenablage
This is the Uncommon weapon, the Scarab, from the game The Cycle: Frontier. The Cycle: Frontier is a PvPvE first person shooter made by Yager Development. They had unfortunately announced that they will be shutting down the game as of…
Allow the print to cool completely before removing it from the print bed. Remove from the print bed very carefully. If you need a different size, please adjust the size of the model according to your own needs.
Printing Information: Use tree support to support the voronoi structure. Use a brim to improve the contact surface with the printbed
La figura es una silueta de un escarabajo, con mecanismo de pinsa, aprieta papeles como clip o Juguete
Parametric pulley for the pyBot Scara, allowing to adjust belt tension by varying the number of teeth.
Alternative gear for the pybot scara that fixes the loose belt issue by adding one more gear to the hub. !Careful if you're using the pybot software from jjrobots it has to be adjusted to account for the changed gear ratio!
Receita Leite Creme 1 Litro de leite; 7 Colheres rasas de açúcar; 5 Gemas de ovo; 4 Colheres de sobremesa rasas de farinha Maizena; 1 casca de limão; 1 pau de canela; Levar o leite a ferver com o pau de canela e a casca do limão.…
Real prints above (As always) Scaled for 28–32mm play , but resizable for 65mm or larger formats. Optimised for FDM printing on a 0.2 mm nozzle with 0.08 mm layer height. eSun PLA+ Supports: minimal; model is pre-posed with strong base…
This SCARA robotic arm is suitable as a base for programming projects. Considering it costs less than $ 40, the strength it can support is not very high. The choice of materials is mainly due to the fact that I wanted to use some pieces I…
This is a scan taken by the British Museum. I have included the original but also an STL with most of the (not very interesting) base trimmed off. The original work is Egyptian, perhaps from the Ptolemaic period (332-30 BCE), taken to…
This is the fraction collector for our FPLC design. The design focuses on minimal commerical parts, and only requires a few 625z bearings, GT2/2GT belts, 2 NEMA 17 motors and microswitches - but requires some extensive 3D printing. The…
Introducing the Scarab Wing kit for your Worker Swift – a comprehensive upgrade solution meticulously crafted to enhance your blaster experience. Bid farewell to the thumbhole stock and embrace this sleek alternative, while indulging in a…
Brazo róbotico tipo SCARA hecho con arduino y motores paso a paso nema 17, necesito ayuda.
Llaveros con la forma de máscaras que utilizan en el video música de “cure for me ” de Aurora Aksnes. Son tres modelos diferentes con 3 colores. Material PLA, altura de capa 0.2mm: Se inicia con una base de PLA blanco En la capa 10 se…
Objeto decorativo del sombrero de Scaramouche, se deben imprimir cuatro copias
Remix de la mascara para conseguir radios en la entrada del acetato, Se incluye STP tambien . Ayuda Valencia . ----------------------------------------- Fácil de imprimir e usar con >180 micras acetato Ayuda humanitaria para afectados por…
este modelo esta sin texturas para uso libre del usuario que lo descargue
Máscara zombi creada con inteligencia artificial.
Print the two hueforge parts 🖨. Assemble them with glue 🧩🧴. Ensure each part fits perfectly 🔄 for a successful assembly ✔. Enjoy the process and your new hueforge! 🎉 First course instructions Print at 100% infill with a layer height of…
This is a Scarab from the pilot episode of the new show being made by the Glitch YouTube channel, "The Gaslight District." While there has only been one episode so far, this appears to be one of the main sources of currency in this show,…
Just got started with Gridfinity and figured I'd create some make up organizers. Most models I found stored things vertically, so here's my solution for fitting the essentials in a drawer. I made these by modeling my make up products in…
These are the printed parts to make adjustable-height feet to attach to the ends of the 2040 horizontal extrusions of the base frame of a Robotdigg SCARA printer. The printer needs 3 of them. The other parts you need are need three…
This Cobra Planter brings ancient Egyptian style to your plants. A detailed cobra with an Eye of Horus on its hood rises and coils around a cylindrical pot adorned with hieroglyph bands and a winged scarab carrying the sun disc, all set…
They are the desert's accountants, drawn to the scent of a fresh debt and here to collect a tax paid in flesh. You'll hear them first as a dry, chittering rustle, like a thousand tiny razors being sharpened at once, and then you'll see…
This is a remix of https://www.thingiverse.com/thing:5366891 and https://www.thingiverse.com/thing:5925551 I really liked how the geared wings simplified keeping both wings together, but I changed a few things to make it easier to print…
¡Lleva un pedazo de Hallownest a tu escritorio! Esta es una colección de la máscara de Hornet del videojuego Hollow Knight . Desarrollé este proyecto realizando varias pruebas de geometría para ofrecer diferentes opciones de impresión…
Escarapela de Argentina para celebrar los 3 mundiales ganados. (Ojalá no sea mufa) Cargué 2 archivos: Un stl y un 3mf con el formato original.
Estas foram testanas no Leroy Merlin Sintra Category: Accessories
Looks best when printed upright rather than laying flat on the build plate. Requires minimal supports. Printed with 5% infill, gyroid and 0.18 mm layers