64 models
The model only needs supports on the free-hanging fins of the rocket, otherwise it prints support-free. The bottom of the scepter has a 26mm hole, so it should fit on (at least to my knowledge) standard broom styles. If not you can scale…
Print approx. €5.07–€6.20 excl. taxPreliminary estimate for one variant
This adapter attaches directly to the pour-spout of a Scepter water container. The other end connects to an inexpensive water pump (like this one: https://www.amazon.com/dp/B07KW4TPNG?ref=ppx_yo2ov_dt_b_fed_asin_title ). It should work…
This is my take on Loki's Scepter (short MCU version). My significant others dad has a replica that I used to help model this in Fusion. My ultimate goal with this was 3d modeling practice and trying to model this in a way that would give…
Loki's Chitauri Scepter from The Avengers (2012) This a replica of the short staff Loki used to mind control Hawkeye and several others, and escape from the S.H.I.E.L.D. compound. This item is approximately 96 cm long (36 in). This…
Midwest / Scepter Gas Can Nozzle and Cap (with f3d for customization) I designed a better one here: https://www.printables.com/model/460322-gas-can-midwest-nozzle-spout-with-breathing-tube IMPORTANT NOTE: Please be very careful when…
Coronation scepter and orb for cosplay. I designed it for my youngest daughter. :) Designed in FreeCAD 0.17.
Adapter that screws on to Scepter water jugs to secure a battery powered water jug pump that we use for our camp sink
You will need these: 6 m3 x 30mm 2 m3 x 20mm 3 m3 x 10mm 3 m3 x 8mm 15 porcas m3 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: PolyMaker PETG Category: Toys & Games
I designed this scepter for my daughter. Easy to print and easy to assemble. The big diamond was printed in vase mode with transparent PETG. The smaller diamonds (buttons) were printed with blue clear PETG. (best result with 215°C smooth…
can be printed right side up or upside down with supports. infill: 15% material: PLA
I designed this toy scepter/wand to be printed in vase mode with a 1mm nozzle at .5mm layer height. It's a quick two-part print that glues together easily with super glue (CA glue). The thick layers give it a nice feel and that much…
A scepter stand styled after the one used by SHIELD when they captured Loki. Print instructions Print Quantities of each part is listed in its file name. Assemble You might need to drill out the pin holes a little. A 1/8in bit will do the…
Es el cetro de Kamek, del universo de MarioKart8. Su longitud son unos 35 cm. Se a dividido en 4 partes con piezas de union, tienen una tolerancia de 0,2 y encajan a la perfección. Se deben imprimir 3 copias de las piezas de union. La…
A scepter for the small emerald to be printed in 2 parts and glued together. I also included the fusion360 file for modifications The emerald came from https://www.printables.com/model/153698-led-emeralds, print the model…
This knob slides over the original breather valve knob to make it easier to grip.
I bought a nice military grade Scepter water jug this last summer for a trip I went on and the jug is fantastic, it very durable and pours really well with a regular spout and a vent. However, the cap that goes over the main spout has a…
A magic wand / scepter model for cosplay, Halloween or for kids play in general. You can see the assembly here (will take you to the exact time stamp): It utilizes a generic dollar store RGB lantern / lamp as the light source. I'm still…
-Main port wrench with socket for pressure relief valve -Wrench holder -Pressure relief valve knob -Spout handle mount Spout mount can be secured using zip ties to both the handle and spout. Wrench holder can be secured with either zip…
This is a model of the Time Sceptre used in TMNT III - Turtles in Time. There is a “Whole” model which prints well enough for a hand-held desktop toy, to be used when bored at the computer. The parts of the Sceptre included in this…
Wonka inspired and Halloween tested. I thought that this bouquet would be fun if it was fitted to a broom handle to function as a sort of candy scepter. Worked great at truck'er'treat. Tons of fun.
You know when Athena raises her sacred scepter, all the Saints kneel, the cosmos trembles, the stars shake, and Pegasus screams something completely unintelligible? Yeah. This is almost the same. Except instead of being forged by the…
Jednoduché žezlo světla.
this is Loki's scepter for mischievous people
Remixed this model to hold a 10mm OD tube for a drip irrigation system on my balcony.
Each part was printed on a P1S 3d printer. Supports will be needed to print the Scepter Top, Scepter Top Rim, Scepter Base Tip, and Scepter Base Rim. The Scepter Top was printed with 10% infill, Gem 1 and 2 with 0% infill, the others with…
Scepter Water Jerry Can Cap 25mm hole
When we got our hands on these items you noticed right away the weight and metal finish. So the challenge for us was to replicate that intricacy. We sliced the items in multiple pieces, 3D printed on a Makerbot Replicator 2, glued…
Only the heart gem for the top seems to need supports. No supports needed for the remaining models.
This is a knob for a fancy wizards scepter/staff. Created for a costume that never did see any use. Print ball side up.
Scepter head. Put on cardboard tube, wood rod or anything. Inside radius: 12.55mm, diameter: 25.10mm
This is a vertical hook to hold the Loki staff to hold the Disneyland Loki Scepter. I also included a silhouette of Loki's helmet to add some flair to the design, but it is not necessary for the hook. I designed this because I could not…
Description A highly detailed steampunk battle scepter featuring mechanical elements, gear-inspired design and a bold spiked head. This model looks amazing even unpainted – especially when printed in metallic filaments…
❄ Feel the chill of the Freljord! This is Rylai's Staff! Presenting a replica of a legendary item from League of Legends – Rylai's Crystal Scepter This full-scale model is perfect for cosplay, as a gaming room decoration, or as a…
Unleash divine power with this stunning fantasy nun figurine that transforms your 3D printer into a gateway of mystical artistry! This meticulously detailed STL model showcases an elegant religious warrior wielding an ornate scepter,…
Railing support 25 mm top adapter. Print in ASA for UV resistance. Sand and smoothen the top with acetone, if needed. Use 5+ walls for strength. For a clean top, print as is, with supports. Print outer walls first (or vv) to reduce outer…
Print And Assembly Feedback No supports needed, except for the gems on top. Brim may be helpful. Must be glued together. Recommend AMS or even just switching filament for color. Customizing The length can be extended by simply printing…
The Honda Marine fuel connector is excellent, but as with any other connector, it is completely exposed at the tank end when not in use leaving it exposed to dirt and saltwater. Whether you have a Scepter/Moeller version or an OEM Honda…
👑 The Scepter of the King of the Toilet 🚽✨ Behold the one and only Scepter of the King of the Toilet — made for the true rulers of the porcelain throne. For those who spend ages in the smallest kingdom. This ancient artifact grants its…
Bring magical enchantment to your space with this captivating 3D printable fantasy gnome STL model that radiates mystical charm! This detailed figurine showcases a wise gnome wielding an ornate scepter, complete with flowing robes and…
About The regular Grand Scepter is 28" tall, but can be customized to be longer. It's intended for a cosplay prop or kids toy. Print Instructions and Assembly Supports are needed for the gem. The other models benefit from a brim, and I…
Scepter nato water container cap adapter
I imagine assembly will be somewhat obvious. Just about everything can be printed without supports, except one of the top pieces. A brim may be helpful, but I just used an inner brim. Increase infill to make it more durable, particularly…
Modeled after the gold SandWing scepter from The Brightest Night graphic novel. I didn't have any red filament for the ruby, but it looks good in most colors. The scepter pieces take 35 minutes, 13 grams and needs some supports. The gem…
Náhrada za těsnící kroužek kanystru pro motorové pily. Originál - Scepter pat. 87712 JS 710 KSL 260305
I recently purchased the Iggycorp Scepter/MCI Water Can Cap for a Scepter jerry can that I carry in the bed of my truck. The offroad trails that I drive on are extremely dusty and the dust finds its way into the bed of my truck where the…
This converts the Scepter 14 gallon fuel tank to a Milwaukee M12 battery. It replaces the whole center part. There are two printed parts: the M12 adapter and the fuel cap cone. Hardware you need: M6 heat-set inserts and 1/2" long bolts…
I made a custom Captain Britain Marvel Legends based off his earlier runs. These are his Star Sceptre and Staff that I made to go with the figure.
Most of the spacers/gaskets in the old Scepter jerry cans are cracked, rotted, or plain missing. Print the gasket out of a decent TPU (most TPU formulations are gas-resistant to a certain extent). I used 8 walls 99% infill on accident and…
Railing support 25 mm top adapter. Print in ASA for UV resistance. Sand and smoothen the top with acetone, if needed. Use 5+ walls for strength. For a clean top, print as is, with supports. Print outer walls first (or vv) to reduce outer…
Description A highly detailed steampunk battle scepter featuring mechanical elements, gear-inspired design and a bold spiked head. This model looks amazing even unpainted – especially when printed in metallic filaments…
Each part was printed on a P1S 3d printer. Supports will be needed to print the Scepter Top, Scepter Top Rim, Scepter Base Tip, and Scepter Base Rim. The Scepter Top was printed with 10% infill, Gem 1 and 2 with 0% infill, the others with…
❄ Feel the chill of the Freljord! This is Rylai's Staff! Presenting a replica of a legendary item from League of Legends – Rylai's Crystal Scepter This full-scale model is perfect for cosplay, as a gaming room decoration, or as a…
Náhrada za těsnící kroužek kanystru pro motorové pily. Originál - Scepter pat. 87712 JS 710 KSL 260305
this model replaces the whole center part M6 heatserts and 1/2 inch long bolts needed for the back m3 heatcerts for the m12 adapter melt in spades for the battery contact point
____________________THIS IS A DIGITAL PRODUCT, STL FILES FOR 3D PRINTING_________________________________________NON-REFUNDABLE_______________________ Files to print Lady Loki Cosplay Scepter from Marvel Rivals. The supports required.…
I created this wand for one of my kids to use in their college's rendition of The Lion, The Witch, and The Wardrobe. I modeled it in Blender and it has a few cool features: It's held together with 1/4" x 1/4" x 1/8" neodymium magnets The…
