52 models
Meet the 30mm CO₂ Fun Grenade – where creativity meets excitement! Designed to turn engineering into play, this 3D-printed grenade (PLA, or any lightweight material you prefer) is made to look awesome, feel cool in your hands, and deliver…
Milwaukee Shockwave box V 2 Added Chamfer to the ends V 3 Shortened the arms for a tighter fit V4 6 mm hole V5 6,1mm slotted holes for div pegboards
A NERF silencer modeled for my son's Elite 2.0. It can probably fit other models. It should be printed as it comes without support.
This is an 8 piece Gridfinity set for organizing the Milwaukee Shockwave impact socket set. It may or may not fit other brands of sockets.
Holder inserts for the Milwaukee Shockwave case for 1/4" hex shank 1" long bits. Bits are held in magnetically. The Milwaukee Shockwave case (large version) has a modular design that allows you to use different types of holder inserts.…
A remix of a remix This is made to fit mil spec buffer tubes but the original 5/16 bolt is just too large and loose for my needs, So I added a insert to make the screw size smaller to M6 which is better fitting for the tube and double the…
Remix of shockwave box holder so it will attach to wall control pegboard system. Added countersunk holes to fit flat head screws.
Copy of the original OPSol adapter for Mossberg shotguns. Adapter allows use of 12ga 1.75″ Birdshot, Buckshot, and Slug Shells Only fits: 12ga Mossberg® 500, 500A, 590, 590A1, and Maverick® 88 models, and the 12ga Shockwave Firearm Should…
Holds Milwaukee Shockwave boxes. Holes widened to fit Multiboard small threads, and lengthened to clear snaps.
The default holders for this set aren’t very good, so I made new ones You can also stack all the bits on one side, which leaves room for other bits on the right. I also included a version with the ½" bit holder in place of one of the 1/8"…
This disc is modeled off of the Axiom Paradox. (5/4/-4/0) At the moment I've only got one to print okay-ish on my printer and it flew very similar to the Paradox. Flippy but not too flippy. Still a work in progress but print it and give…
2024-FEB-7: Lost track of my files a bit, but uploaded several I had in the mix over the last week… the V2 design is stronger and does not have the flanges on each end. *** Iterated a bunch to get a minimal design that is still strong…
Bobble the head of your favorite Decepticon Military Operations Commander! Get the spring and base of your choice from the original bobblehead print by 3DPrinty, or use my 3MF or provided gcode. This model includes a remix, with…
Model was ripped from Fortnite using the Fortnite Porting tool for Blender and modified slightly with meshmixer and a few other programs to get to a printable state. https://github.com/halfuwu/FortnitePorting Included are two versions,…
Holds New Milwaukee Shockwave boxes larger version, can be a bit tight. The idea came from moldel https://www.printables.com/model/125957-milwaukee-shockwave-box-holder Thank you. Reccomended: Print with 3 walls
Mount for Honeycomb Storage Wall for the Milwaukee Shockwave boxes.
The Shockwave holders that came with the kit were very stiff and made it hard to pull the bits out. I've made essentially the same style of holder but now it's much easier to manipulate the bits. It still has the nice flip up ability of…
This is a Skadis hanger for the new packout version of the Milwaukee Shockwave bit cases. The only hangers I could find online were for the older style that had bigger rectangular cut outs. The newer cases have smaller cutouts that are…
Insert holds: M12BLIDRC M12 battery (in my case M12HB2.5) M12TC2 USB charger Small compartment in the back for bit holder or other small parts Remaining space of the organizer is used to store a SHOCKWAVE Set 38pcs (4932492009) or other…
Just a simple holder/organiser for 4 Milwaukee shockwave boxes The walls are 2mm thick the more wall loops you use the stronger it will be, I printed with 3 walls in PETG and seems pretty tough
All credit goes to Daniel Wilson - all I did was add magnet holes. The original model remains untouched otherwise and fits the socket set like a champ.
Here is the model for my Shockwave Egg, a fun little model for your Easter decorations. It has a flat base but I still printed mine with just a little support from the print bed for the very bottom of the egg. I hope you enjoy. Happy…
No supports needed!
A bit holder designed to hold Milwaukee SHOCKWAVE impact driver bits on a Milwaukee M12 Fuel ¼" impact driver. I originally designed this for my Uncle who daily drove it for a while. I recommend using a filament like PETG and not PLA for…
A deluxe scale shockwave blaster with 5mm handle.
I couldn't find a replacement that did the same thing so I recreated it myself in fusion. First version was bending the box, so I made one of the walls 0.5mm smaller, and it now works well. I also made the resting lip shorter than the…
A insert for the Milwaukee Packout version of the shockwave case that has a clear top. I bought the radius gauge set off amazon, but you can find the same set on aliexpress, etc. Print Settings: Material : PLA Supports: Yes - Automatic…
A holder for my drill bit box
Ten wydruk jest wersiom lego Shockwave Hammer z gry fortnite
Printed in PETG with four walls for strength at 50% infill.
Two versions. Both fit pretty snug, so I recommend PETG or PLA+ with some durability.
Simple spring tension mod. I only have a Shockwave 2.0 so I am not sure if this would also work with other nerf plungers. Just remove the plunger and add the spacer in the top of the plunger. Just like in the images. Removing the top of…
50% Gyroid infill works best for traction in our studies, the tire is made out of TPU and the hubs are made on Markforged Onyx printers. Used for West Coast SwerveX modules.
Always check where the notch is on the rail and try to match it with the bump inside the accessory. PRINT WITH BRIM IF PRINTING VERTICALLY
Der "SILENCER SHOCKWAVE" ist mega leise und extrem präzise, nur das Design gefiel mir nicht. Also habe ich es zu einem Zylinder umgebaut. Mit FuzzySkin Voronoi ergibt sich ein sehr geniales Bild.
Náhrada vnitřního dílu vypínače pro baterku PRINCETON TEC Shockwave II
Box for SHOCKWAVE™ adapter set from 1/4"HEX to 1/4", 3/8", 1/2" Milwaukee 4-sided /4932479228/ For better grip on the adapters, use 6x3 mm non-smoking magnets. But this is not necessary.
PRINCETON TEC Shockwave II náhradní díl zajištění vypínače.
Fits my Rockhopper balisong utility/trainer/fidget knife. Fully interchangeable with the original scales, and gives your Rockhopper a fresh new look. Inspired by a certain “squiggly” original. This looks boss in a two-color print. Print…
Velcro not included, 15% Infill 2 Walls Thick work best in our studies.
Der kleine "SILENCER SHOCKWAVE 120x30mm" ist angenehm leise und extrem präzise, nur das Design gefiel mir nicht. Also habe ich das Flaschen Design zu einem Zylinder Design umgebaut. Mit FuzzySkin Voronoi ergibt sich ein sehr geniales Bild.
# Milwaukee Shockwave Corner Bit Adapters (+4 Bits) Adds 4 additional standard 1/4" (25mm) hex bits into the unused front corners of your Milwaukee Shockwave case. ### 🔍 Compatibility - Milwaukee Shockwave 32pc Bit Set (Part No. 4932 4642…
This model recreates an SR-71 Blackbird flying through a sliced soundwave or shockwave dome. The sculpture is built from individual 2 mm thick slices that fit into the angled slots of a base. There is approximately 1 mm of space between…
A Remix to store your Ender 3 tools in a Milwaukee Shockwave Case. Category: Tool Holders & Boxes
Meet the 30mm CO₂ Fun Grenade – where creativity meets excitement! Designed to turn engineering into play, this 3D-printed grenade (PLA, or any lightweight material you prefer) is made to look awesome, feel cool in your hands, and deliver…
Always check where the notch is on the rail and try to match it with the bump inside the accessory. PRINT WITH BRIM IF PRINTING VERTICALLY
