457 models
I made an improved version with more details: A model of an imperial Lambda-class Shuttle from Star Wars with foldable print-in-place wings. It comes at 1:270 scale. The cannon barrels are fused together to make them less brittle. The…
Print approx. €3.41–€4.17 excl. taxPreliminary estimate for one variant
The imperial T4a Lambda-class Shuttle was a personal transport used by high ranking imperials, including even the emperor himself. It was an elegant ship that was nonetheless heavily armed. Its cockpit could be ejected as an escape craft.…
Print approx. €3.31–€4.04 excl. taxPreliminary estimate for one variant
The Star Commuter 2000 is a compact passenger transport which appeared in Rebels and Resistance. It's essentially a bus that can go to space. Because of its simplistic shape, I've added more details to the surfaces then I normally would.…
Print approx. €1.06–€1.30 excl. taxPreliminary estimate for one variant
The T1 Shuttle was used by the Jedi during the High Republic Era. It is an early predecessor of the T6 Jedi Shuttle from The Clone Wars. The scale should be around 1:270. I couldn't find much on its canon dimensions, so I've scaled it to…
Print approx. €2.35–€2.88 excl. taxPreliminary estimate for one variant
Not all interstellar or in-system cargo gets transported in military dropships, so I re-modeled this source design into a civilian drop shuttle for your all-purpose basic inter-orbital transportation needs, at 6mm scale (it could also…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
This is a simple stand for the Jazwares Ahsoka Tano T-6 Jedi Shuttle from Micro Galaxy Squadron. It can support the shuttle in many different modes as the wing can rotate 360 degrees. If you use the gcode files, I used Hilbert Curve for…
Print approx. €4.08–€4.99 excl. taxPreliminary estimate for one variant
The Marauder was a modified Omicron-Class Attack Shuttle used by Clone Force 99 aka The Bad Batch. It appeared in the final season of The Clone Wars and most of The Bad Batch . (There were some changes between Clone Wars and Bad Batch .…
Print approx. €4.05–€4.95 excl. taxPreliminary estimate for one variant
Boatshuttle with a 150 mm (6") nail as axle. 2 small 0.8mm steel wires are needed to secure the nail. Bobbin included
Print approx. €1.74–€2.12 excl. taxPreliminary estimate for one variant
Needles: 10cm, 15cm & 20cm Shuttles: 10cm, 15cm & 20cm
Print approx. €5.62–€6.87 excl. taxPreliminary estimate for one variant
Inspired by the Atlantis display at Kennedy Space Center, Florida, here is an add-on for the 3D Shuttle Stand. Attached is the gcode to pause the print at layer 20 in order to change filament color. Also attached, is the NASA logo to be…
Print approx. €2.20–€2.69 excl. taxPreliminary estimate for one variant
A Space Shuttle Line Art display plate
Print approx. €1.91–€2.34 excl. taxPreliminary estimate for one variant
240x30x3mm 240x20x3mm 200x30x3mm 200x20x3mm
Print approx. €1.41–€1.73 excl. taxPreliminary estimate for one variant
Support Me Support my work by subscribing to my Printable club to have access to my new model, my first lander, the Starship V2 . You can also have access to the multi-material version of the Space Shuttle. Updates 22/11/2023 Added a…
This is my model of the Space shuttle Endeavour OV-105. The model is a kit and does not require any glue. It is roughly 50cm long and has several features. The cargo bay doors can be open. It has posable arm and the satellite could have…
More of my Star Wars kit cards are available at: Millennium Falcon Kit Card Tie Interceptor Kit Card Landspeeder Kit Card Also check out the awesome Star Wars Kit Cards by benzz88 Edabot Nakozen and delman83 This was made to fit when…
If you download the model, please don't forget to leave a like. Thank you! <3 This 3D print file captures the awe-inspiring moment of a space shuttle breaking through billowing clouds, ascending into the boundless expanse of space. This…
This is a booster pack for the Space Shuttle Edeavour . It consists of the Orange external tank and two Solid Rocket Boosters. The pack is attached to the Orbiter using the holes for a stand. In the suffix of the files, there are color…
1/200 Space Shuttle FSS Tower for Kmobrain Space Shuttle models Print all parts in Grey except “white….” named parts Ajust arm height to stick them on the tower at the right height for the Shuttle Use 1mm axis for arm and Beanie cap or…
This is 3D printable model of the Space Shuttle OV-101 Enterprise from the Star Trek and the real life. It is a kit. The different colored parts are separated for easier printing. In the suffix of the files, there are color codes: w-white…
can be printed together or separately in other colours can be printed without support the Shuttle is very realistic Print in place kit card , Assembly required
The print consists in two parts to be glued together, but the whole model is also available. The original 3D files used for this model are available here .
NOTE: check out the original version for more information: Spaceshuttle - Kit Card by Crea_Hicks - MakerWorld An easy to print and fast to assemble Spaceshuttle Kit Card. Recommended to print with a low layer height (0.08mm) or supports…
Remove the wheels as in the pictures (see picture 4 & 5) Space shuttle : Fixed with wall plug (see picture 8) and Double-Sided Tape for nose gear (see picture 6) Slide the front part (red axle) into the “shuttle hook nose gear” (see…
Pas de tir de la navette spatiale à l'échelle du magnifique modèle de Kmobrain https://www.printables.com/fr/model/2139
This is a model of the Valkyrie Shuttle from the Avatar series. It is made as a kit and does not require any glue. The model has several features: Openable roof door Movebale engine parts VTOL engines can rotate Openable back door…
Somewhat faithful replica of the RS-25 main combustion chamber (Space Shuttle's engine). It was designed for conventional machining, but should print ok too especially if done in resin. The threads are #0-80 so likely won't print well on…
Hey everyone, first of all, it would mean a lot to me if you could download my model. It truly inspires me to create more. I make these models because I find it enjoyable, and I want to give back to all of you. All my models are…
This is a simple net needle/shuttle which can be scaled down in your slicer to suit whatever job you have at hand. The STL attached will print a 280mm long shuttle if printed diagonally on a 250 x 200 mm nominal print bed. If you require…
The Delta Flyer Commissioned in 2375 & built by the stranded crew of the Starship Voyager. Able to accommodate 3 crew onboard, with several formidable armaments. Model is not my own however I could not find any Delta Flyer models here so…
Original model This support is to be used with my Space Shuttle . Dimensions et Informations Il fait environ 8 cm de haut pour 16 cm de large. Il y a 15 pièces à imprimer. Je l'ai imprimé en environ 4 heures. Conseils de Réglages Infill :…
This is an accurate recreation of a toggle switch guard used on the many control panels in the space shuttle. Included is a PDF are the part dimensions in case the standard thread dimensions of the switch are different from what you…
This is a revision of ModelStation's Space Shuttle model, with most of the major components fixed to be properly manifold and normals corrected (according to both Blender and Slic3r) where needed. I also took the time to un-triangulate…
This is a simple print of a toy space shuttle. Despite slicer warning, supports were not required on my Pruse MK3. A simple print, toy airplane can be found here .
Intro: my kid is a lot into space shuttles and have an original Duplo space shuttle ( https://www.lego.com/en-gb/product/space-shuttle-mission-10944 ) so I created for him attacheable orange external tank with booster rockets (real…
use the .3mf file with color change
Experience the thrill of owning this iconic starship with this stunning 3D printable STL model that brings the galaxy to your desk. This meticulously detailed Imperial Shuttle features authentic triangular wing design, intricate hull…
NASA's Space Transportation System (STS, AKA Space Shuttle), modeled in 3DS MAX. Modeled in one day as a demonstration for a class I taught.
Here is a modular ice shuttle that all the parts printed on an MK3S+. Its parts were designed in tinker cad. I used Petg for everything with 3-4 walls and 30% gyroid infill. Supports are only needed for the transducer holder. Just about…
This is a refined version of the model I'm actually using - this model has the shuttle sitting bit closer to the wall than you see in the picture. For strength, I recommend that you print in PETG 20% infill and in the orientation you plan…
Introducing my very first sponsored project. When Bambu Lab released their new translucent PETG filament I've reached out to them with an idea that have been thinking about for a while now, a model that resembles a stained glass window.…
Landing gear might not print well, so don't say I didn't warn you
A grate looking space shuttle Very easy to print Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Yes Supports: Yes Resolution: 1.5mm Infill: 20 Filament: . PLA feul tank - orenge, other - white Category: 3D Printing
A Space Shuttle Pocket Rocket Kit card, the perfect gift for anyone who loves rockets.
This is the main ADDON to the Endeavour Space shuttle. This Addon gives you possibility to print different shuttle orbiters - the whole fleet actually. It is divided to individual folders and each consists of the shuttle parts, that…
I have just quickly added screw holes. I don't trust tape.
Greetings everyone! I've been working on creating a replica of the Destiny shuttle from the Stargate universe. This one is a low poly sample file. The highly detailed model is moved here:…
Space Shuttle kit card ornament I made to give to my friends Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 25% Filament: Hatchbox PLA PLA White Category: Decor
I recently got a Contour ShuttlePRO V2 to help with video editing in Final Cut Pro. It came with paper labels for the upper buttons, but for my needs I was missing two labels. And the lower six buttons have no labels. I thought I'd use my…
I picked up an older model Easy Weaver loom at a second hand shop, but it was missing quite a few pieces, including a shuttle. They are generally made out of a wood species such as beech, which is hard to find around here. In addition,…
Building a Cockpit or just want some Fidget..here are 3 haptic feedback switches: Rocker Switch with two stable positions. Toggle Switch center position - always returning to center. Toggle Switch End is centered with two stable end…
Simple Tatting Shuttle Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Filament: Prusament PC Grey Notes: Any material does the trick. Category: Gadgets
use the .3mf file with color change
Articulating Star Wars Imperial shuttle. Remixed from original and includes colored design. Prints well but the wings are not geared to each other and move independently. Added custom stand to hold the shuttle up to display it with the…
I worked on this mounting system for 2 months struggling with fusion 360 and working around my PCs limited ram capacity. I have now had this mount on my wall for 2 months and we have no signs of issues so far. This mount uses 4 m5x16…
A simple stand to display a LEGO model Remixed from hxla s space shuttle stand, just made it smaller and slimmer. It didn't turn out perfect though, as I had trouble with editing the stl file. Maybe I'll add a new, parametric version in…
Overview: This model is a 1/60 scale model of the space shuttle and MLP. The shuttle itself is the Amphioxus model available here for a reasonable price: https://cults3d.com/fr/utilisateurs/theamphioxus/fichiers-3d NASA chose to reuse the…
A replacement for “xxx_-_sat_logo_w_b.stl” from the original model by Martin ( https://www.printables.com/model/628010-space-shuttle-endeavour ). I removed the “Prusa Research” text and replaced it with the NASA worm logo. Print using a…
Clone Wars Season 7 Episode 09 introduced a new mandalorian ship which appeared for only a single scene. It is the ship that took Asohka and Bo-Katan to their meeting with Anakin and Obi-Wan. The design is similar to a…
I recently bought and restored a Kenner Imperial Shuttle from 1984. The wing mechanism was broken, I looked online for free replacement parts, but I couldn't find any. So I made my own in Fusion 360, enjoy! Print instructions: For a full…
Experience the thrill of the Empire with this stunning Imperial Lambda-class shuttle 3D print model that captures every intricate detail of the iconic spacecraft. This meticulously designed STL file showcases the shuttle's distinctive…
This is a model of the Discovery Space Shuttle optimized for Resin Printing. This is the 3d scan from the Smithsonian Air & Space Museum of which I give full credit. This model has very fine details that cant be printed with a normal FDM…
A lightweight tapered shuttle for inkle or tablet (card) band weaving and beating. Scale up or down to fit your needs. Materials and tools needed Filament of your choice (I used silk PLA) Print recommendations 0.12mm layer height for a…
NASA's Space Shuttle program, officially named the Space Transportation System (STS), operated from 1981 to 2011. The Challenger OV-099 was first built as a test bed for the program, but in 1983, it would take its first maiden flight. The…
This is a simple weaving shuttle I made for my girlfriend. It's easy to print in PLA. I printed it with 100% infill just to be sure but I don't think it's necessary. I also made a Backstrap Weaving Loom , have a look!
Classic Shuttlecock for Badminton. Can be used as a keychain or trophy. Prints well with PLA (haven't tried anything else). Includes a “Trophy-stand” for 3 sizes, you can put a regular steel nut in the base as a weight.
The main body will probably need to be split to fit on your printer, the wings will need to be copied and mirrored for the other side.
Just print and mount onto the wall and the Lego Shuttle carrier is ready to hang on the wall. This mount requires the landing gear to be out to work.
I don't like any paywalls and will always support free creations so no models will ever be locked behind a paywall. If you really appreciate my work and would like to say thank you by supporting me then why not help me and keep me going.…
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
Public domain model of the Space Shuttle Discovery, from the collection of the National Air and Space Museum. Originally uploaded to the Smithsonian 3d digitization archive .
🚀 Shuttle-Modell aus Star Trek: Strange New Worlds – Detailgetreuer 3D-Druck Tauchen Sie ein in das Universum der U.S.S. Enterprise NCC-1701 mit diesem beeindruckenden, detailgetreuen 3D-gedruckten Modell eines Shuttle-Typs aus der Serie…
Space Shuttle wall mount I redesigned the model from JLevin to print it without support. Print settings: PLA / PETG (recommend) min. 20% infill To fix it on the wall, I used screws with a 5mm diameter. I also recommend some higher angle…
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
These game pieces were designed for a contest for a board game. Since they were not selected as a winning entry, I am now offering them to you here for free. I'm thinking that, in addition to board game pieces, they might work good for…
I created this to be a budget 3d printable ice shuttle for the Hummingbird Helix 7. There is currently no support for other Ice fishing models but remixes are welcome. The shuttle includes a 3 position rod holder, integrated glow cup,…
This is based off of Equagga's Unibody Tatting Shuttle. I've increased the size by 30% and added raised lines to improve the grip. I edited this in Fusion 360. Print Settings Printer: Powerspec Ultra 3D Rafts: No Supports: No Resolution:…
This model is compatible with the lego system.
This model is a simple trace/extrusion based on one of the last recorded photographs of the Space Shuttle Challenger, which blew up shortly after it launched on January 28th, 1986. Photo inspiration originally found in this book:…
Just combining the model into a single piece that is lined up correctly. Category: Vehicles
The Nu-Class Attack Shuttle was a shuttle used by the Galactic Republic during the Clone Wars. Its service continued into the early days of the Galactic Empire. It appears in The Clone Wars and The Bad Batch. This is a model with folding…
Hi Chris here is the updated files as per your request, Cheers Jace Thanks Alec for building the ghost and posting a video, Cheers Jace
This is a tatting shuttle that uses small crochet hooks for the pick and Class 66 bobbins for the thread. I decoupaged the shuttles with napkins, tissue paper, etc. and on some I added bling. I used UV resin to finish them but you can use…
Shuttle-shaped valve cap . Two sizes - for Schrader -auto and Presta valve types You can fly into space on a bike!!! When printing, I recommend using an inner brim due to the small contact area. Valve types:
Alternative parts for the STS Endeavour by Martin. I also add images of print orientation. Note some parts have been split up. All parts are remixed with a 0.1mm Tolerance. For most this will mean the parts snapfit together. If parts are…
This is my first attempt at a remix. I haven't had a chance to print it yet, so I'm not sure how it will turn out. It will need support to bed. The wings should move. Good Luck UPDATE 3-13-2016: Version 2 = A total redo of the wing hinges…
This is a 4" (10 cm) bobbin for a Leclerc weaving shuttle. This prints just fine without supports, but you may want to add a brim to keep from toppling over. Print instructions Category: Replacement Parts Print Settings Printer Brand:…
A MMU print of the American flag for Martin's Shuttle Endeavour.
The change here is that the pieces are now solid with a flat surface with no addition plates to be fitted. Before you try print this please consider the orientation that creates flat surfaces, so please print these vertically so that the…
A straightforward badminton shuttlecock modeled in real scale. For decoration purposes only. 16 feathers needed to form the entire shuttlecock. Front and rear rings snap into place outside and inside the feathers, respectively.
Bring badminton to life with this detailed 3D miniature of a shuttlecock! Perfect for sports fans or as a decorative piece, this model is designed in three parts: the feathers, the tip, and a separate ring for the colored strip. The…
I generated several weaving bobbins to insert into boat shuttles. Several are modified to accommodate more yarn. The trade off for this is they require either hand winding or using the unique Ashford bobbin winder due to the narrow hole.…
A bobbin (or spool) used to hold yarn or thread in a boat-shuttle for weaving. Print instructions Print the shaft vertically with the endplate flat on the bed. Given the height, adhesion medium (glue stick) is recommended. My examples are…
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
navette spatial a imprimer en deux partie les reacteur est le corp le corp en blanc est les reacteur en noir
Helps guide the backplate on to the CNC shuttle. Built in supports can be removed by pinching the part and support together. Attach with 2x M3x6 BHCS.
This is a basic 1/2in x6" netting needle for net making and repair. There are two versions Thin and Thick
serenity shuttle , smaller version for gambody serenity ship print without scaling for correct size. Larger version with base can be built with cockpit lights, nav lights in wings and strobe light. 9v battery can be put in base. print…
Please note the Screenshot: This is a remix made from Printable Blueprints Collection by Basement Creations https://www.printables.com/model/459633-printable-blueprints-collection
