Counting matching models…
Replacement (and possibly upgrade to R3 version) Z top-mounts for the Prusa MK4 printer with extensions to mount an IKEA Silverglans/Skydrag 16"/40cm light bar. (Tested with Silverglans; IKEA number 305.286.70). The Skydrag/Silverglans…
angled mount for IKEA's SKYDRAG lamp
Bracket for an additional light bar behind the frame which doesn't interfere with the original spool holder. Works with both IKEA Skydrag and Silverglans. Both are powered by 24V so theoretically can be powered by the MK4 power supply…
Remix of the already great design by pipo. Also check out the original design! Let there be light! Use this model to easily mount an IKEA SKYDRAG oder SILVERGLANS (40cm) light bar to the Z-axis of your MK4/MK4S. The light bar is also…
This is an IKEA SKYDRAG LED Light Bar Holder for the Prusa i3 MK2/S and MK3/S/+. Lamp used: SKYDRAG Size 40cm https://www.ikea.com/de/de/p/skydrag-led-lichtleiste-arbpl-klschr-sensor-dimmbar-anthrazit-90439628/ 904.396.28 The cool thing…
Add IKEA LED Skydrag on your MK4/MK4S with a nice integrated design ! Ikea Led : SKYDRAG bag lumin LED av capt plan trav/arm, intensité lumineuse réglable anthracite, 40 cm - IKEA
Basic Mount the the IKEA Skydrag LED Light bar. Can be used to create your own mounts.
Mounts for the IKEA Skydrag 18" LED light bar to attach to the IKEA Skadis Peg board
I wanted to add a light bar to the Prusa MK4. As the IKEA Skydrag/Silverglans LED Light is available also in black, I decided to go with it instead of popular MITLED solution. Printed with PLA and 15% infill.
This adapter allows you to mount any IKEA SKYDRAG LED strip rotated by 45°. Prints without supports on the flat side.
Removed hex pattern and added chamfers inside.
Prusa Bear IKEA SKYDRAG LED Light Bar Holder Lamp used: SKYDRAG Size 40cm https://www.ikea.com/de/de/p/skydrag-led-lichtleiste-arbpl-klschr-sensor-dimmbar-anthrazit-90439628/ 904.396.28 The Skydrag lightbar is operated with 24V 3.6W and…
Skadis mounting for IKEA Skydrag 24" light bar.
Needed to bridge multiple IKEA Skydrag for a 1m cabinet
Spare part for IKEA Skydrag Mount that prints fast without supports. Happy printing and mounting.
Altered the model to fit in our Prusa Enclosure. You can use the screws and bolts that come along with the prusa enclosure and bolt into the excisting holes. For the Skydrag to fit you will be needing 1 short side and 1 long side in…
Designed this LED light bracket for a set of IKEA Skydrags for side mounting on the aluminium profile of my Flsun SR. Printed with: PLA 20% infill no supports when laying on the side Used 3 clips per Skydrag and it still works great.
Replacement (and possibly upgrade to R3 version) Z top-mounts for the Prusa MK4 printer with extensions to mount an IKEA Silverglans/Skydrag 16"/40cm light bar. (Tested with Silverglans; IKEA number 305.286.70). The Skydrag/Silverglans…
I don't have yet eny project with 24V LED strips and instead to order LED strips and alluminium profile I just found 40 cm IKEA Skydrag Led assy with 3 meters of the cable. With that clip you can attach the LED light to any corner of the…
This is a set of brackets / holders for the IKEA Skydrag LED light bar. I designed it to have the bars attached to the back of my desk, yielding indirect lighting. The brackets can be screwed directly into a tabletop. If you do not want…
Each IKEA SKYDRAG light fixture comes with two attachments which let it screw into a surface. However, if you want to place two lamps side-by-side, you end up having to screw each lamp individually, wasting space and making alignment more…
On a mount, there are spacings for felt stickers (chair floor protection stickers), so the mount fits softly and nicely. See pictures for details. I've tested the mounts with the 80mm light bar, so it should be ok for a shorter one. To…
Enhance the stability of your Ikea Skydrag lamps with this custom 3D-printed mount. Designed for a secure fit, the mount utilizes two 3.5mm screws to firmly anchor the lamp to your cabinet. Enjoy a hassle-free installation and peace of…
End cap pieces for the IKEA Skydrag linear shelf lights to allow magnets to be inserted either from the top or the side to allow non-destructive mounting of the lights. Uses the great mount geometry from @stephenbriggs_529843 as the base…
Remix of Markuzzzi's IKEA Skydrag LED light brackets: https://www.printables.com/model/530174-ikea-skydrag-led-light-brackets Modified them so they mount nicely (I think) to a shelf. Also included a notch to tuck away the cable. Shelf in…
Mount an 80cm Skydrag LED Strip in a way that optimally lights a working surface at the wall: Assumes the distance between working surface and light is the same as the depth of the working surface. In the above picture, the LED strip is…
Prusa MK4/MK4S Snap-On Light Mount for IKEA SKYDRAG/SILVERGLANS, smaller (10.5 - 12 inch version)
Needed 2 support for the new ikea skydrag led bar(40cm) to put ontop of my prusa 3d printer. printed with PETG prusament on my prusa mk3 printer, nozzle 0,4 layer 0,2 3 wall infill 30% almost no support needed, just for the hexagon (see…
Print accoring to original Prusa instructions
Mount the Skydrag light on a Skadis board. Overhang is roughly 10 to 11 centimeters and the light is mounted at a 45 degree angle. Use the mounting parts that come with the package, but replace the tiny screws that come with the Skydrag…
The 300mm length version of the IKEA Skydrag was on sale, so I bought a bunch of them. This is a very simple model which slides onto the end of the original mounts and then screws perfectly into the mount holes on any vertex of the…
Keep your SKYDRAG organized and accessible with this custom 3D-printed holder designed to fit perfectly on the IKEA SKÅDIS pegboard system. This holder is precisely cut to the exact dimensions of the SKYDRAG device and angled at 45° to…
You bought as me a skydrag for your 3Dprinter, here is what you need
This is a simple bracket for the IKEA Skydrag LED-Bar that you can fit to a monitor stand with a diameter of 35 mm. I used two/three M3 screws and threads. Printed in PLA with variable infill: 15 % for the most part, bracket in the front…
These brackets are designed to hold IKEA SKYDRAG lights 20cm from IKEA SKADIS pegboards. There are various other nice SKYDRAG mounts on printables, but I wanted to have the lights extend farther over my work area. Use 6D678's excellent…
I've made a remix where the mounts are a 20 degrees tilt to get the light a bit further away. And i've lengthen the mount a bit so its more sturdy
There are other nice Ikea Skydrag adapters on printables, but none seemed to have .step files for remixing. So I made one. .step and Solidworks maker .prt files are included for your remixing fun.
Remix of the already great design by pipo. Also check out the original design! Let there be light! Use this model to easily mount an IKEA SKYDRAG oder SILVERGLANS (40cm) light bar to the Z-axis of your MK4/MK4S. The light bar is also…
Keep your SKYDRAG organized and accessible with this custom 3D-printed holder designed to fit perfectly on the IKEA SKÅDIS pegboard system. This holder is precisely cut to the exact dimensions of the SKYDRAG device and angled at 45° to…
Remix of Markuzzzi's IKEA Skydrag LED light brackets: https://www.printables.com/model/530174-ikea-skydrag-led-light-brackets Modified them so they mount nicely (I think) to a shelf. Also included a notch to tuck away the cable. Shelf in…
