Search results: soundcore

Sort order

85 models

P
PrintablesKos Kos

Soundcore Life Q30\Q35 Part

Soundcore Life Q30\Q35 Part I reinforced it a bit in the most fragile place, as the original part I had broke during installation Category: Audio Video -

Downloads
1,541
Likes
68
Rating
5
P

Soundcore life Q30/Q35 - headband piece

After 2 years of use these pieces broke in my headphones. I believe that is a common thing after some time. I created a 3d model to replace the original, and it works great! Probably better printed in PLA for rigidity and in PETG for…

Downloads
968
Likes
74
Rating
4.9
P
PrintablesGency

Soundcore Q30 Protector Clip

Soundcore Q30 headphones sound good but has a poor build quality. The intend of this design is to reinforce broken headphones or protect them against damage. The protector clip may be made longer (or shorter).

Downloads
220
Likes
16
Rating
0
P
Printablesdragazo

Soundcore Headset Arm

My husband's Soundcore headset broke an arm. I tried printing out an existing model , but realized it was for a different version that uses screws on both ends rather than using plastic hook connectors on one end. So I've modeled this…

Downloads
218
Likes
20
Rating
0
P
PrintablesEric Cosky

ANKER SOUNDCORE BLUETOOTH SPEAKER MOUNT for L-Track or other single point attachment

This is a small remix of this model which was almost what I needed but not quite. I have a camper van with Adventure Wagon L-track on the walls, and I wanted a way to mount my Anker Soundcore bluetooth speaker to the L-track. I modified…

Downloads
202
Likes
30
Rating
5
P
PrintablesJohnBenzo

Anker Soundcore 2 Wallmount

I got tired of my Soundcore boxes lying around, and due to the lack of wall mounts on the internet, I decided to make my own and this is what I came up with. It is printed upright, so no support is needed. The teardrop shaped holes on the…

Downloads
199
Likes
24
Rating
5
P
PrintablesRafael Becerra

SoundCore Life Q35 - remix to add holes for hooks and reinforced tip

The original part required to remove the hooks in the headset cover, and drill it to use some screws to afix it. I added the holes in the part, so the cover with the hooks can be slide in it, and just use the original screw at the bottom.…

Downloads
175
Likes
9
Rating
2
P
PrintablesPo_temkin

Soundcore Life Q30\Q35 Top Replacement Part

Have a nice day, everyone! I hope all of you enjoyed my replacement base part for Souncore Life Q30/Q35 When I screwed my original top enclouser, I made a mistake and after couple of months, I found cracks on it I fixed it with superglue,…

Downloads
171
Likes
7
Rating
0
P
Printablesstefan77

IKEA Skadis Soundcore 2 Holder

IKEA Skadis Soundcore 2 Holder. Printet with 3 outer layers and 20% infill

Downloads
166
Likes
34
Rating
4
P
Printablesfesme

Soundcore motion + support for monitor

I created these support for the ANKER SOUNDCORE MOTION + to attach them on top of a 27 inches monitor. THe monitor is 26mm thick I have attached stl and step files in case you want to modify them.

Downloads
157
Likes
21
Rating
0
P
Printablesanimatorgeek

Anker Life Soundcore Q30 headphone band mender

My Q30 headphones, like every over-ear headphone I've had before them, broke after a mere four months of use. Fortunately, the headband has a spring steel structural piece, so I could still use them, but the broken plastic threw off the…

Downloads
143
Likes
19
Rating
5
P
PrintablesPo_temkin

Soundcore Life Q30\Q35 Base Replacement Part

Have a nice day, everyone! Like many other guys, I suddenly found that my headphones were broken. But instead of buying another one, I decided to spend a couple of days creating the spare part. I reinforced it as much as I could and think…

Downloads
134
Likes
7
Rating
0
P
Printablesmatroosoft

Charging stand for Soundcore Liberty 4 NC

Angled USB-c cable from Aliexpress: (Modeled for this specific type of cable, other angled cables will not fit!) ----EDIT: OLD LINK REMOVED. I've got word that this cable is no longer available, therefore I deleted the link. I found an…

Downloads
123
Likes
12
Rating
0
P
Printablesmusicdj

simple Soundcore liberty 4 case

you can add some glue at the bottom if needed

Downloads
115
Likes
19
Rating
0
P

Soundcore Liberty 4 Stand

Just a simple but elegant stand to hold the Soundcore Liberty 4 NC earbuds' case. Enjoy! I printed at .08 since I added the text, in the splicer. Otherwise, it should be fine at standard .2, 15% infill. If so inclined to fuel my…

Downloads
78
Likes
12
Rating
0
P
PrintablesMattRigg

Soundcore Liberty 4 NC Ikea Skadis mount

I wanted a mount for my Soundcore earphone case that would allow me to remove the earphones whilst keeping the case held in place. It's a snug fit, so make sure your printer is calibrated well. I used the IKEA Skadis Hook by…

Downloads
76
Likes
9
Rating
5
P

Soundcore Space Q45 headphones cover

better print in vertical position with organic supports

Downloads
75
Likes
14
Rating
5
P
PrintablesMadBob

Anker Soundcore Motion Boom Hanger Land Rover Defender Dash

I wanted a sound system in my Land Rover Defender, this would mean buying a MUD centre console, stereo, speakers, new door skins for speaker mounts etc. (or mount them in the headliner). Instead I chose to buy a Bluetooth Anker Soundcore…

Downloads
73
Likes
14
Rating
0
P
PrintablesMiaoucat

Kirby Holder for Soundcore Mini bluetooth speaker

very simple holder that print easily! simply print, paint and use! depending on your printer you might need to add a couple layer of painters tape inside to act as a spacer. it also prevent the speaker from vibrating and making weird…

Downloads
72
Likes
12
Rating
0
P
Printablespoyu

Anker Soundcore Holder

What For use with Anker Soundcore 1 Bluetooth speaker. For the mounting, I used this kind of mounting tape , any tape that has a width of about 30mm and thickness >1mm would work. I don't have the Soundcore 2 so I don't know if it can…

Downloads
70
Likes
7
Rating
0
P
PrintablesJamnik89pl

Soundcore Q20i Headphones Hanger for underdesk installation

Soundcore Q20i Headphones Hanger for underdesk installation

Downloads
65
Likes
2
Rating
0
P
Printablesmmmries

Soundcore Life Q20 - Headband Splint

I love my headphones, but the plastic is brittle and has become broken. Let's keep them going a bit longer by making a splint. This initial approach is very simple, I just took a reference photo and tried to model the inner curve and then…

Downloads
60
Likes
11
Rating
0
P
PrintablesEllo

Anker Soundcore Q20 Headband Reinforcement Splints

Ahh, I love Anker. Well, probably used to. Their quality control has gone way down compared to the first time I've bought their products. Specifically, these pair of headphones, the Anker Soundcore Q20. Lovely pair of headphones, but…

Downloads
60
Likes
3
Rating
0
P
PrintablesGona2119

Soundcore Flare Power Button Replacement

The model still in beta. But works flawlessly with my speaker, any suggestions are welcome Greetings from Argentina

Downloads
59
Likes
1
Rating
0

Anker SoundCore Shroud for VW T5 Dashboard Overhead Slot

Surrounds an Anker SoundCore speaker in the storage "slot" above the dashboard of a Volkswagen Transporter T5. It doesn't quite match the corner rounding or "depth" of the speaker, but it still fits really well to cover up the gaps around…

Downloads
55
Likes
7
Rating
0
P
PrintablesAlloysome

Anker SoundCore ATV mount

Keeps your phone AND the aker soundcore clamped to an 18mm rollbar found on many common atv's (x4) 5mm SHCS are required Holes print to hardware size, just thread them in printed at 50% infill PETG as a minimum

Downloads
54
Likes
12
Rating
0
P
PrintablesSomeZ3D

Soundcore+ Vesa Mount Brackets

Have a laptop that lives on a gas mount VESA arm. Wanted to hang my Soundcore+ speaker from the bottom on the unused VESA mount holes. It's designed to attach to the backside of the VESA mount with a slight angle on it so that the speaker…

Downloads
50
Likes
3
Rating
0
P
PrintablesStr33t4rt

Soundcore Anker Liberty 4 NC wall mount

Little wall mount for your Soundcore Anker Liberty 4 NC case. Supposed to screw on a wood wall or similar. Print in any material you like. No supports needed. You have to rotate the modell in your slicer.

Downloads
49
Likes
3
Rating
0
P
PrintablesMaxim7745

Anker Soundcore Q30 Headphones Hook

This hook is tailored to the geometry of this particular set of headphones, matching the cushion curve and width. Models should be printed in their current, sideways, orientation for strength. Two versions are included to allow the hook…

Downloads
49
Likes
4
Rating
0
P
PrintablesRuhel

Anker Soundcore Q45 headband brace

I purchased the Anker Soundcore Q45s for my son to use in the gym. The headphones are great but the headband is not strong enough for gym use. These allow for strengthening the band. I used black Gorilla tape to adhere the brace to the…

Downloads
46
Likes
8
Rating
0
P
Printablesgedora13

Anker Soundcore 2 3D scan

Quick test of Einstar Rockit that I've used to scan a Anker Soundcore 2 bluetooth speaker. Figured this might be helpful for anyone still modelling accessories for this legendary speaker. It's not ultra-fine scan, but it's more than…

Downloads
45
Likes
0
Rating
0
P
PrintablesMatthias L

Skadis Soundcore Life A1 Case Holder

An Ikea Skadis compatible case holder for the Soundcore Life A1 headphones

Downloads
45
Likes
11
Rating
0
P
Printablesrs6alex

ANKER SoundCore Boost Stand

Two parts, use glue between both parts. Have FUN

Downloads
45
Likes
10
Rating
0
P
Printablesvictornpb

Anker Soundcore Boost Bluetooth Speaker Vertical Stand

I designed this stand for the Anker Soundcore Boost Bluetooth Speaker to be able to sit Vertically, as they work great as a stereo pair. Since the charging port is on the left side I didn't like the fact that it makes the cables look…

Downloads
43
Likes
11
Rating
5
P
PrintablesBacon

Shower speaker holder Anker Soundcore / Halter für Anker Soundcore in Dusche

This is a holder for the Anker Soundcore to put in the shower. You clip them on the glasscover of your shower as seen on the pictures. You have to print two of them (just multiply the print in your slicer). I put just one in the STL file…

Downloads
41
Likes
4
Rating
0
P
Printablesnuxnik

Anker Soundcore Space NC Headphones

Synopsis The Anker Soundcore Space NC headphones are pretty good. I have had them for a few years. However, the plastic connectors to from the headset to the ear phones are thin and flimsy. Mine broke after a year or so. Since the…

Downloads
38
Likes
8
Rating
4
P
PrintablesBrave Butter

Anker Soundcore Mini Speaker Case

Case for Anker Soundcore Mini, with opening for controls and two lanyards holes.

Downloads
38
Likes
2
Rating
5
P
PrintablesPo_temkin

Soundcore Life Q30\Q35 Reinforcement Clip

Have a nice day, everyone! I hope all of you enjoyed my replacement base part for Souncore Life Q30/Q35 After more than 3 years of using, I found that top of the arm started to crack So, time to new robust design! Did want to create whole…

Downloads
37
Likes
4
Rating
0
P
Printablestaiguy

Anker Soundcore Motion Boom Plus Bumper

The Soundcore Motion Boom Plus sounds great for the price but the build quality is lacking as the entire body is made from hard plastic with zero rubber or silicone. These are lightweight TPU bumpers that can be attached to the ends with…

Downloads
37
Likes
2
Rating
0
P
PrintablesSmifem

Soundcore Motion+ Stand

This speaker stand audibly improves the sound quality of the speaker. When placed directly on the desk, the speaker vibrates, which is unpleasant for the musical experience. The model is compatible only with the Motion+ speaker.

Downloads
36
Likes
5
Rating
0
P
PrintablesTom_R

Rugged Case for Anker SoundCore

The bumpers need to be in TPU so they will flex over the case and hold it tight. You will need supports for the TPU part. Print Settings Printer Brand: FlashForge Printer: Dreamer Rafts: No Supports: Yes Resolution: 200 Infill: 20…

Downloads
36
Likes
10
Rating
0

Soundcore 3 monitor mount

Soundcore 3 top monitor mount - should also work for other sound core / Bluetooth speakers modals and most monitors. printed in E-sun PLA

Downloads
33
Likes
8
Rating
0
P
PrintablesKrautla

Anker Soundcore Boost - Travelcase

Travel safe with a case!

Downloads
32
Likes
2
Rating
0
P
Printableskymberlicodes

ANKER SoundCore Boost Ikea Skadis Shelf

This is a remix of rs6alex 's ANKER SoundCore Boost Stand so that it can be hung up to be displayed on the Ikea Skadis pegboard. Make sure to also print out two universal skadis hooks.

Downloads
31
Likes
9
Rating
0
P
PrintablesJemit

Home Assistant Voice + Anker Soundcore Mini Cube

Short description The built-in speaker of the Home Assistant Voice PE is okay, but with an Anker Soundcore Mini via AUX (3.5 mm jack) it sounds much better. AnkerCube combines both devices into one clean and compact setup with cable…

Downloads
30
Likes
9
Rating
0

Anker Soundcore Charging Dock

This is a simple charging dock for an Anker Soundcore Upgraded Speaker . It may also fit the standard model. It uses the stock charging cable and routes through a channel in the back to have the speaker mesh face you while charging. Fit…

Downloads
29
Likes
11
Rating
5
P
PrintablesOesie

Gridfinity Anker Soundcore Sport X20 holder

About This gridfinity holder is designed for the earbuds case of the Anker Soundcore Sport X20. Print instructions Based on one print run: PLA, 0.2 mm, no support.

Downloads
28
Likes
1
Rating
0
P
PrintablesMaxim7745

Anker Soundcore Q30 Headphones Button Extender

This design adds larger buttons to Anker Q30 headphones (transferring presses to the Q30's buttons beneath). The standard ones can be hard to find quickly, especially if wearing gloves. The new buttons can be pressed either axially or…

Downloads
27
Likes
3
Rating
0
P
PrintablesgZrQ8yvQHvpw2dd

Anker Soundcore and phone caddy

I often carry my soundcore and phone around together so that I can stream content to the speaker. This little caddy makes it easier to do. The soundcore slots into the front part of the caddy, and there's a slot behind it that can take my…

Downloads
21
Likes
7
Rating
0
P
PrintablesIIIPgCIII

Anker Soundcore Liberty Air gridfinity holder

Designed a gridfinity holder for my Anker Soundcore Liberty Air bluetooth earbuds.

Downloads
21
Likes
5
Rating
0
P
PrintablesBrkl

Anker Soundcore

Are you at a camp and seeking a spot to place your Anker Soundcore? Fear not, this mount is tailored for you. Say goodbye to the requirement of a flat surface. Now, you can effortlessly suspend your Anker Soundcore from a tree! You will…

Downloads
21
Likes
3
Rating
0
P
PrintablesYasser

soundcore Q20 splint

Apparently many soundcore headphones have a problem of the plastic being brittle and falling apart over time, mine started to crack so I decided to make a small splint to hold them together. Printed on a modified Ender 3 in PLA and 0.2mm…

Downloads
20
Likes
1
Rating
0
P
PrintablesLaserBee

Anker Soundcore Speaker clips for Citroen 2CV

Printed in PETG, four walls, 30% Gyroid infill. Could probably work with fewer walls, less infill, and in PLA, but I wanted it to be strong. Fits my late-model Citroen 2cv, clips onto the plastic behind the steering wheel. EDIT: Now a…

Downloads
20
Likes
5
Rating
0
P
PrintablesStickAtSea

Soundcore Sport X20 case/cover for dust and scratch protection

Should be printed in TPU, default settings are fine, just needs a support for the connector piece in the middle.

Downloads
17
Likes
0
Rating
0
P
PrintablesZen Vibes

Soundcore Sleep A30 Stand

An organizer for 2 roku sized remotes and a pair of Soundcore Sleep A30 earbuds or anything with a similar case.

Downloads
17
Likes
7
Rating
0
P
Printablesthereddevil

Gridfinity - Soundcore A10

A 2x2 grid using the excellent Gridfinity Rebuild OpenSCAD to store Soundcore A10 headphone case. 15% infill, 0.2mm layer height, 0.4mm nozzle

Downloads
17
Likes
1
Rating
0
P
Printablesmuchtall

Anker Soundcore Life Q10 Monogrammed Name Tag Clip

(Imported from my models on Thingiverse: https://www.thingiverse.com/muchtall/designs ) This is a monogrammed tag for an Anker Soundcore Life Q10 bluetooth headset. This was designed in OpenSCAD, and is uploaded as a Customizer, so you…

Downloads
16
Likes
1
Rating
0
P
PrintablesTengrom

Anker Soundcore Flare II speakers case

Anker Soundcore Flare II case

Downloads
16
Likes
2
Rating
0
P
PrintablesLucas Yamamoto

Holder for Anker SoundCore2

I made this model just to put a handle for my Anker SoundCore2. The first one that I printed was too tight to my speaker. But I fixed adding 5 mm on the sides. Still, the print on the image is in that old format.

Downloads
15
Likes
4
Rating
0
P
PrintablesCaederus

Soundcore Liberty Air 2 QI spacer

This is a booster seat for the Soundcore Liberty Air 2 ear buds case to fit on a QI charger. Specifically I have an Anker PowerWave. This spacer will raise the earbud case 31mm and give it a stable platform

Downloads
15
Likes
0
Rating
0
P
Printablesconsoleiro

Soundcore Liberty 4 NC Skadis Holder

Mix both model to a skadis mount. Print with supports. Must print https://www.printables.com/model/283732-skadis-dovetail-peg-system the double. it's a quick n dirty mix in tinkercad.

Downloads
14
Likes
6
Rating
0
P
PrintablesJashy

Anker Soundcore Mini Phonograph Case

This Case for the Anker Soundcore will redirect your audio and give it a tinny effect, though it won't necessarily amplify it inherently. Cutouts are made so you can still access all ports and buttons. For assembly, you'll need to print…

Downloads
12
Likes
3
Rating
0
P
Printablesbastiklein

Headphone Holder/Mount (Soundcore)

This Minimalistic design uses only around 12g of filament and is ideal for mounting headphones to a wall. A small strip of double sided tape is enough to secure the print onto a surface. The reason for this design is as there was nothing…

Downloads
12
Likes
3
Rating
0
P
PrintablesSandra Lee

Soundcore Sleep A30 stand

The uploaded 3mf print is slightly improved from the images. I had made the USB cord slot too small and had to drill it out a bit to salvage the print, and I found myself wishing that I had made the front cavities a little larger. I fixed…

Downloads
12
Likes
4
Rating
0
P
PrintablesIIIPgCIII

Anker Soundcore Life Note 3i Gridfinity bin

2x2 Gridfinity bin for Anker Soundcore Life Note 3i headphone case. Designed to lay flat in a shallow drawer.

Downloads
11
Likes
3
Rating
0
P
PrintablesHansonaut

Soundcore 3 Station with Smartphone Holder

My son's Tonie Box was no longer sufficient for his needs (long audio plays, easily switching between tracks, skipping to certain chapters). We therefore opted for a Bluetooth box, the Anker Soundcore 3 and a n old cell phone, which is…

Downloads
10
Likes
1
Rating
0
P
Printablesjohn rambo

Soundcore 3 riser

This sleek 3D-printed stand is made to elevate your Soundcore 3 speaker for better sound projection and airflow . The design includes clean, minimal lines with slotted grooves to hold the speaker in place. Thanks to the smart geometry and…

Downloads
9
Likes
1
Rating
0
P
PrintablesElijah Sommer

Soundcore 2 Hanging Case

A remix of a case by Wirthuose for the Anker Soundcore 2. Designed to print in one piece and does not require additional parts. This is my first remix/design. MAKE SURE TO USE SUPPORTS. Raft strongly recommended

Downloads
9
Likes
2
Rating
0
P
Printablesxellabs

Soundcore A20i Under Table Mount

Keep your desk clean and your earbuds always within reach! This custom-designed under-table mount for the Soundcore A20i securely holds the charging case while staying hidden under your desk, shelf, or nightstand. Perfect for…

Downloads
9
Likes
0
Rating
0

Soundcore Life A1 Magsafe adapter

I suggest printing at 0.1 or less. I did mine at 0.08, 1 wall, 100% and it fits great. The additional grooves are supposed to help with glue overspilling to the sides. I used a basic 2 part epoxy. You should clamp the adapter to the case…

Downloads
9
Likes
0
Rating
0
P
PrintablesCody Reichert

Anker Soundcore 2 and USB cable - Gridfinity Bin

Gridfinity 2x2 Bin: Anker Soundcore 2 + Cable A custom-fit Gridfinity bin designed specifically for the Anker Soundcore 2 Bluetooth speaker. This 2x2 unit keeps your speaker secure and organized on your desk or in a drawer, featuring a…

Downloads
6
Likes
6
Rating
0
P
PrintablesTurborave

Anker Soundcore Q10 Headband Fix

Did the headband on your Anker Soundcore Q10 headphones crack? If so, print this part to cover up that crack. There is no replacement part available from Anker, I contacted them and they said nope. There is a thinner and thicker version…

Downloads
5
Likes
1
Rating
0
P
PrintablesNathanTJFA

Inner Swivel Plastic comp. w' Soundcore Life Q35

I don't know if these are compatible with the Q30s. I recommend using supports for the screw holes.

Downloads
5
Likes
3
Rating
0
P
PrintablesArticlabs

Anker Soundcore Space A80 eartip connector replacement

Tested at 0.06mm, works like a charm

Downloads
4
Likes
1
Rating
0
P
PrintablesNikkio

Anker Soundcore Bluetooth Speaker Bike Mount

This is a bicycle mount for an Anker Soundcore speaker so you can listen to tunes while riding. Its easy to insert and remove the speaker from the clip while mounting securely to your bike using zip ties. The whole model should be printed…

Downloads
4
Likes
0
Rating
0
P
PrintablesSteve

Anker Soundcore 2 Vertical Stand

A vertical stand for the Anker Soundcore 2 bluetooth speaker. I got sick of it tipping over, so here it is.

Downloads
4
Likes
1
Rating
0
P
PrintablesMre

Soundcore Motion Boom Plus Feet

Anker Soundcore Motion Boom Plus repalcement feet should be printed out of TPU if you want there to be any grip.

Downloads
3
Likes
1
Rating
0

Soundcore Q45 parts

Хорошие по звуку, но сделанные из абсолютно отвратительного пластика наушники теперь необязательно выбрасывать-их можно немного заколхозить и дать им вторую жизнь. Именно так я и поступил. Навыков моделирования и проектирования деталей в…

Downloads
3
Likes
0
Rating
0
P
PrintablesFilamentix

Left / Right Side Color Bands for Anker Soundcore Aeroclip Earbuds

Usual marking is red for right side and blue for left side. I recommend and have tested printing with color PETG.

Downloads
2
Likes
0
Rating
0
P
PrintablesAlex Hondros

Anker Soundcore mini Bluetooth wall mount

Anker Soundcore mini Bluetooth wall mount Holes are spaced 35mm from each other Side access to charge and turn on/off

Downloads
1
Likes
0
Rating
0
P
PrintablesJamie C

Soundcore P30i Gridfinity Cradle – 2×1

This Gridfinity cradle was designed specifically for the Soundcore P30i/A3959 earbuds charging case. The case sits upright in four low corner supports, saving drawer space while remaining easy to remove. The centers of all four sides are…

Downloads
1
Likes
0
Rating
0
P
Printables

Soundcore Sport X20 case/cover for dust and scratch protection

Should be printed in TPU, default settings are fine, just needs a support for the connector piece in the middle.

P
Printables

Home Assistant Voice + Anker Soundcore Mini Cube

Short description The built-in speaker of the Home Assistant Voice PE is okay, but with an Anker Soundcore Mini via AUX (3.5 mm jack) it sounds much better. AnkerCube combines both devices into one clean and compact setup with cable…

P
Printables

Anker Soundcore

Are you at a camp and seeking a spot to place your Anker Soundcore? Fear not, this mount is tailored for you. Say goodbye to the requirement of a flat surface. Now, you can effortlessly suspend your Anker Soundcore from a tree! You will…