Search results: spiderbeam

Sort order

Counting matching models…

P
PrintablesSwiftyTheFox

Guy Wire System for Spiderbeam Mast with Rope Tensioners / Winders

This Guy wire system for SOTA/POTA is a bit more than just rings for a Spiderbeam 7m mast: Its winders are also rope tensioners, like those used for tents. This makes trimming the wires easy and fast, exactly what you need on a windy…

Downloads
694
Likes
94
Rating
5
P
Printablesdp makes

Spiderbeam 12m Mast - HAM RADIO

short : Important notice: If you choose to buy it — thank you so much! https://cults3d.com/en/3d-model/gadget/spiderbeam-12m-mast-ham-radio Your support means a lot. By purchasing this model, you are authorized to: ✅ Print, copy, and…

Downloads
524
Likes
84
Rating
5
P
PrintablesLinas LY2H

Guy Rope Collar for the 10m Spiderbeam Fiberglass Mast

It's a guying rope collar to support the guying ropes on the 10m fiberglass mast from the Spiderbeam company. The outer diameter of the collar is 110mm, the inner diameter - 53.4mm (this includes some 0.4mm overlap for the bead of…

Downloads
276
Likes
21
Rating
5
P
Printablespd3ron

Clamps for Spiderbeam Mast 12m

Calmps for spiderbeam 12 mtr, incl guiding rings and groundplate Mast clamps and anchoring rings for Spiderbeam fiberglass mast 12m Alternative to the mast clamps with rubber and shrink tubing. Particularly suitable for portable use - no…

Downloads
238
Likes
22
Rating
5
P
Printablesrob911sc

Guy plate for 7m SpiderBeam mast

This is a simple guy plate for the SpiderBeam 7m portable Fiberglass pole. There are 2 versions, TIGHT and LOOSE. The tight one will fit snuggly against the pole, The loose one will be able to freely move when it is on the pole. This guy…

Downloads
153
Likes
19
Rating
5
P
PrintablesVolker

Klemmring SpiderBeam Mast für DN75 Rohr

Original-Seite https://www.wyae.de/hardware/SpiderbeamKlemme/ Ein 10m bzw. 12m SpiderBeam Mast passt FAST in ein DN75 Abwasserrohr - wackelt aber. Mit dem Klemmring steht der Mast bombenfest. Also: 50cm langes DN75 / HT75 Abflussrohr mit…

Downloads
140
Likes
11
Rating
0
P
PrintablesArndt DC7OT

Guy plates for 12m Spiderbeam mast / Abspannscheiben für 12m Spiderbeam Mast

ENGLISH: These disks are used for triple guying of a Spiderbeam antenna mast. The dimensions are for the 12m HD model. They are designed to be threaded on from the top and then sit on the next largest mast element so that it does not go…

Downloads
109
Likes
10
Rating
0
P
PrintablesMrSteel1982

Spiderbeam 10m Mastspitze mit Öse Masthead with eyelet

A simple Masthead with an eyelet to attach a wire antenna or a rope. Designed to fit on top of the smallest element of a 10m Spiderbeam Mast.

Downloads
103
Likes
9
Rating
5
P
Printablesdgardner

Amateur Radio SpiderBeam Antenna Pole Add-Ons

I recently purchased a SpiderBeam 40" expandable fiberglass pole for use in the field with my ham radio gear. It's a great product but I found a few useful items to print for it. This is a collection of those things. All are printed in…

Downloads
97
Likes
7
Rating
0
P
PrintablesEA2W

Spiderbeam mast holder for backpacks

Mast Holder for backpacks. Designed to carry a Spiderbeam 7m fiberglass mast (Inner diameter 55mm).

Downloads
84
Likes
19
Rating
5
P
PrintablesSteven Duyck

Spiderbeam ground fixing point.

Spiderbeam ground fixing point for 10 meter spiderbeam fiberglass pole. Three ankerpoints for tent pegs. Bottom of pole (cap) fits into it.

Downloads
83
Likes
11
Rating
5
P
PrintablesAngusMG

Spiderbeam 10m Bottom Cap with Peg and Wire Hole

I created custom replacements for the original bottom screw-on cap of the Spiderbeam 10m pole. One model includes only a 24mm washer and a M8 nut so a M8 dowel screw can be inserted into the bottom as a peg. If you feel like it, you can…

Downloads
76
Likes
3
Rating
0
P
PrintablesAngusMG

Spiderbeam 10m guy wire ring

A guy wire plate that sits on the 3rd segment of the 10m Spiderbeam telescopic pole. I did not include tensioner plates as I found it way easier to buy ready-made tent strings in the nearest hardware store. Those came in a neon yellow…

Downloads
74
Likes
7
Rating
0
P
PrintablesDK1MI

Spiderbeam HD 12m Pole Mount

This adapter allows the bottom tube of a Spiderbeam HD 12m fiberglass mast, which has an outer diameter of 55mm, to be attached to a 42mm steel mast. When you mount two or more of these adapters, they automatically align with the two…

Downloads
54
Likes
9
Rating
0
P
Printablesmkrz

Geocaching biltema hook - tool for Spiderbeam, tip diameter 6,5

I made this hook for my Spiderbeam rod. The diameter of the tip is 6,5-6,6mm so I made the hole with 7mm diameter. You need 2 screwes M6 with nuts, it holds very good without force, you need to tighten the screws very smoothly. It will…

Downloads
46
Likes
4
Rating
5
P
Printablestedk

7m Spiderbeam Dipole Center

This model fits over the top element of a 7m Spiderbeam mast, has zip-tie holes for a toroid and strain relief holes for the antenna wires. The large holes fit a straight BNC connector, with the hole on the other side supporting a third…

Downloads
33
Likes
1
Rating
0
P
Printablesrmc47

Spiderbeam 7m end cap

Printed on CORE One, Prusa PLA, 0.15mm speed, 50% infill.

Downloads
30
Likes
1
Rating
0
P
PrintablesDer Solinger

Guy plates for 12m HD Spiderbeam mast / Abspannscheiben für 12m Spiderbeam HD Mast

--- ENGLISH: --- These disks are used for triple guying of a Spiderbeam antenna mast. The dimensions are for the 12m HD model. They are designed to be threaded on from the top and then sit on the next largest mast element so that it does…

Downloads
29
Likes
0
Rating
0
P
PrintablesEA2W

Spiderbeam 18m guy plates

Guy plates for Spiderbeam 18m.

Downloads
28
Likes
3
Rating
0
P
Printablesmkrz

Geocaching biltema tool for Spiderbeam, tip diameter 6,5

I made this tool for my Spiderbeam rod. The diameter of the tip is 6,5-6,6mm so I made the hole with 7mm diameter. You need 2 screwes M6 with nuts, it holds very good without force, you need to tighten the screws very smoothly. It will…

Downloads
25
Likes
0
Rating
0
P
PrintablesEremius

SpiderBeam 12m guy collars

An upper and lower collar for a SpiderBeam 12m mast. v2 holes are enlarged to better fit the carabiners I have.

Downloads
22
Likes
0
Rating
0
P
PrintablesTomáš Vrána

Geocaching biltema tool for Spiderbeam, tip diameter 7mm (REMIXED)

Remix of PET holder attachment to spiderbeam pole (7 mm tip). Printed from PLA with 4 perimeters and 50% gyroid infill.

Downloads
19
Likes
1
Rating
0
P
PrintablesMarcK

GeoCaching Spiderbeam: Klemme

GeoCaching Spiderbeam: Klemme oben - Spiderbeam 12Meter Kompatibel mit der 12Meter Spiderbeam Angel ( Modell/Kaufdatum 2026 ) Benötigtes Material: 4x M4x16 - Inbus-Schraube verzinkt - DIN 912 4x M4 Usch - U-Scheibe verzinkt - DIN 125A -…

Downloads
5
Likes
1
Rating
0
P
Printableskurbennett

Spiderbeam 12m XHD Post Mounting Brackets

Spiderbeam mast brackets for 12 meter XHD fiberglass telescoping mast. These mount on a 4x4 Post (3.5 x 3.5 inches). I used PETG, .4 nozzle, .20 structural layer height, and 4 perimeter wall. The two holes will accommodate a 1/4 inch lag…

Downloads
5
Likes
0
Rating
0
P
PrintablesMarcK

GeoCaching Spiderbeam: Angel-Adapter

GeoCaching: Angel-Adapter für Spiderbeam - 12Meter Angel Kompatibel mit der 12Meter Spiderbeam Angel ( Modell/Kaufdatum 2026 ) 16 Versionen: 4x M6 - Messing - Gewindeeinsatz ( Einschmelzgewinde ) 4x M8 - Messing - Gewindeeinsatz (…

Downloads
4
Likes
0
Rating
0
P
PrintablesMarcK

GeoCaching Spiderbeam: Transportkappe

GeoCaching Spiderbeam: Transport/Schutzkappe für Spiderbeam-Elemente - 12Meter Angel Kompatibel mit der 12Meter Spiderbeam Angel ( Modell/Kaufdatum 2026 ) Benötigtes Material: 1x Paracord oder... 1x Spanngummi oder "elastische…

Downloads
3
Likes
0
Rating
0
P
PrintablesMarcK

GeoCaching Spiderbeam: Endkappe

GeoCaching Spiderbeam: Endkappe - Spiderbeam 12Meter Kompatibel mit der 12Meter Spiderbeam Angel ( Modell/Kaufdatum 2026 ) Benötigtes Material: 4x M4x16 - Inbus-Schraube verzinkt - DIN 912 4x M4 Usch - U-Scheibe verzinkt - DIN 125A - 4.3…

Downloads
2
Likes
0
Rating
0
P
PrintablesMarcK

GeoCaching Spiderbeam: Schutzkappe

GeoCaching Spiderbeam: Schutzkappe für die Angeladapter E1 - E4 Kompatibel mit der 12Meter Spiderbeam Angel ( Modell/Kaufdatum 2026 ) 4 Versionen: 801 - Innen Ø - Konus - 54.9 bis 54.7mm 802 - Innen Ø - Konus - 55.1 bis 54.9mm => My…

Downloads
1
Likes
0
Rating
0
P
Printables

7m Spiderbeam Dipole Center

This model fits over the top element of a 7m Spiderbeam mast, has zip-tie holes for a toroid and strain relief holes for the antenna wires. The large holes fit a straight BNC connector, with the hole on the other side supporting a third…

P
Printables

Spiderbeam 7m end cap

Printed on CORE One, Prusa PLA, 0.15mm speed, 50% infill.

P
Printables

SpiderBeam 12m guy collars

An upper and lower collar for a SpiderBeam 12m mast. v2 holes are enlarged to better fit the carabiners I have.