Castello del cavaliere
Castello del cavaliere
Print approx. €2.61–€3.18 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 24
- Likes
- 2
- Rating
- 0
120 models
Castello del cavaliere
Print approx. €2.61–€3.18 excl. taxPreliminary estimate for PETGSource material: PET
Donatello re-mixed
Many people had problems printing the shell. That's why I uploaded a new file - donatello-new.stl. Thank you for downloads, likes… Enjoy !
Propeller Guard / Blade Protector for DJI TELLO micro-Drone. Print with support. Thinner and lighter than the genuine ones. UPDATE 23/03/2020 / v2.5 : here is a slightly thicker version (the original file is a bit sketchy, so changing…
Por si has perdido alguna hélice que es muy común @están los dos tipos de hélices
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Bo remixed from KingRahl baby rattle https://www.thingiverse.com/thing:1961083 Turtle Shell by jootoole https://www.thingiverse.com/thing:4983162 Strap used……
TMNT set Fortnite (Donatello, Michelangelo, Raphael,Leonardo)
A much more rigid and tough propeller guard, made to withstand more devastating crashes, than the original one provided by Tello. Print Settings Printer brand: Prusa Printer: i3 MK4 Rafts: Doesn't Matter Supports: Yes Infill: 20% Filament…
This simple lightweight clip allows you to attach a mirror pane to the front of the Tello to give you a view looking straight(ish) down. I'm trying to make the mirror as small as possible but may need to make it a little bigger as I can…
Originally published by cheshyrkat at thingiverse.com . Printed in various PETG on MINI + with no problems.
This is a small model of the Pocatello temple of the Church of Jesus Christ, based on Colton Jensen's design . See Also Cedar City Temple
12cm vysoký Teenage Mutant Ninja Turtles - Donatello
I took this original idea for a ping pong ball carrier and remodeled it to be easier to modular and easier to print. Print the clip and attach to the Tello. Then attach either the box or the bowl. Use Tello's 8D flip capability to drop…
This is a replacement for the original guard that comes with the Tello Drone, I broke one of mine and then I look for a replacement on internet but they are really dificult to get one, not only because of the price but also because of the…
LOTS MORE! DeskBuddys here: DeskBuddy Collection by CheekyTomato | Printables.com 🟠 Full TNMT collection here: 1987 TNMT Collection by CheekyTomato | Printables.com More added regularly until even the most obscure characters are included.…
Case for Tello drone. Drone fits with propellers and protectors. Drone and 2 batteries will sit still in the case without additional securing. Cover fits but doesn't hold - use tape or rubber band to secure it. Print instructions…
Bring the genius turtle to life with this incredibly detailed 3D printable STL model that captures every aspect of the beloved purple-masked hero! This stunning figurine showcases Donatello in his iconic pose, complete with his signature…
E3 version has a slightly weaker mount but should fit 220x220 beds. (rotate the model 45 degrees) Low quality because it's an STL edit, I made it to send to a friend who has the drone and likes star wars very much. If it works for you…
I used pieces from several existing models. I also created a more realistic turtle head that's dummy 13 compatible. All files are 100% size. Leo and Raph are 125% in my pictures. Mikey is 100% (and has different hands in the pics. I can…
Ryze / DJI Tello case with two battery holders You will need 4x Screw 4 x 12 mm M4 4 x Bolt nut M4 Print instructions Category: Toys & Games Summary Ryze / DJI Tello case with two battery holders You will need 4x Screw 4 x 12 mm M4 4 x…
Two different British Martello Tower coastal defense fortifications. During the French invasion scare of the early 1800s the British constructed over a hundred of these towers across the eastern and southern coasts. The smaller one is…
Small slim-line wall mount for the DGI Tello drone. Something to show it off but nice and compact. Holds Tello drone and 3 x batteries. I fixed to the wall with a strong velcro picture hanging strip and is solid enough for the purpose.…
Still learning how to create 3D models for printing so if you have any issues or suggestions please let me know. Scale for 1:12 figures. This is version 1. I provided 2 options for the pipe. I split it in half (pipe_split_x2) to allow for…
Schöner Ständer für eine Ryze Tello man kann ja nicht immer Fliegen :-) die Datei stammt von Thingverse https://www.thingiverse.com/thing:3723779
Biglietto “Occupato” divertente per il bagno - Fai sorridere i tuoi amici / ospiti. Questo cartello è perfetto per segnalare in modo giocoso che il bagno è in uso, evitando imbarazzi e garantendo delle risate. Caratteristiche: - Design…
Universal Monsters-Abbot & Costello Meet Jekyll & Hyde - 1953 3D printable model.
Philips - Marathon FC9218 floor pro Funktionale Reproduktion des Staubsauger Verschluß, da das Ersatzteil nirgends erhältlich war. gedruckt mit PLA seit ca. einem Jahr im Einsatz Lock of bagless vacuum cleaner printed with PLA in use…
I liked the model that used a rod or dowel for strength and the size of it, but prefered the grip from the other, so I combined them. The orginal says to use a ½ in rod, but I found a 7/16 in. dowel worked best. I added some extra options…
I made this for our classroom which uses Tello drones in education. If you have a lot of batteries like us, it could be useful.
Дизайн Этот 3D-модель представляет собой миниатюрную фигурку черепашки-ниндзя с мечом. Она выполнена в стилизованной ман
You can safely and easily remove propellers from a drone's motor without causing damage and reducing the risk of bending the blades or injuring your hands.
I modified the DJI Ryze Tello universal platform to change out the top platform for a ping pong ball cup. According to this posting it was a remix from the Tello Tile Mount by keizi666 https://www.thingiverse.com/thing:2943670. I seek no…
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
Maniglia per l'apertura del portellone posteriore del furgone Fiat Scudo, Peugeot Expert e Citroen Jumpy prima serie
Slightly rounded on the inside to snap snuggly to the AirTag. Sits out of range of the props, so no need to elevate above. Just be sure to re-calibrate drone after attaching. Disclaimer: I don't actually own an AirTag, so I just printed…
Love the new Tello drone - but wanted to give it a little more camera than what comes with it. Using this simple mount you can quickly clip an 1080p 808 Camera to it. I've posted the base clip for the Tello in case someone wants to…
Mount on Tello Flash type accessories like GoPro Zeus Support positioned for best possible centring of weight. Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: No Supports: Yes Resolution: .2 Filament: PRUSA PETG Category:…
This is a simple caddy for storing DJI Tello batteries. This version holds 10 because that's how many we have in my classroom! The walls go all the way up to the little "notch" on the batteries, but if you wanted to save filament/time,…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm Swap Instructions: Start with Black At layer #7 (0.58mm) swap to Jade White At layer #14 (1.14mm) swap to Black At layer #15 (1.22mm) swap to morado At layer…
Coltello facile da stampare e resistente
Tello Lunar Excursion Module (LEM) UPDATE* When I first test flew this it didn't have the Nozzle in place. After attaching it I discovered it interferes with the Tello's altitude and stabilization system so it needed to go. At the same…
My own version of the downward-facing mirror mount for the Ryze Tello. Much easier to print than the existing ones around, with chamfers for strength and holes for weight saving. Printed using ABS, with normal supports for 70 degrees…
DJI Tello round guard, prints with supports. Snaps on the propellors. The rod on the top is to keep distance from the top of the quadcopter. The 8 places on the side are for VL53L0X Time-of-Flight Distance Sensors:…
Rear Door Handle Fiat Scudo / Citroen Jumpy / Peugeot Expert OEM 9408720738 - Maniglia Interna portellone posteriore Two Versions: Standard / Lite MANIGLIA INTERNA SERRATURA PORTA PORTIERA DESTRA PARETE POSTERIORE FIAT SCUDO FIAT…
This gives you a nice place for the turtle food bowl that wont turn over. Gives the turtles an island and a diving board. Fits 5 gal tanks. approx 7.75" deep.
What this is A very basic four battery holder for holding DJI Tello batteries. Could be handy for those wanting a way to hold some DJI Tello Drone Batteries. I designed this quickly in Fusion360. The batteries sit loosely and move a bit,…
A sturdy sliding case that can store a pair of Tero propellers and a removal tool.
I ended up using 4 micro cable ties in addition to the clips Total Weight was 12 grams No Supports needed for centre Bracket New Model Added with less weight. requires 4 x 3mm holes drilling holes drilling to attach with Micro zip ties
Modelo 3D de Mario y Destello (Estilo Amiibo) Esta es una recreacion detallada del Amiibo de Super Mario Galaxy. El modelo fue generado mediante la IA (Meshy 5) y esta pensado para fans de Nintendo y coleccionistas de figuras, la figura…
Donatello (Donato di Niccolò di Betto Bardi) – Bust FR Ce buste représente Donato di Niccolò di Betto Bardi , plus connu sous le nom de Donatello, l’un des plus grands sculpteurs de la Renaissance italienne. La sculpture capture les…
After seeing a couple of other 'remixes' I thought it would be fun to make one that allowed the 6" GI Joe Astronaut fly the Tello. And I was right, it was fun. I'm not sure if this would fit any of the other GI Joe 6" figures (I only have…
This is a battery case for Tero. There are three types of cases: Solo, which can hold one battery, Duo, which can hold two batteries, and Trio, which can hold three batteries.
"Science is great, but pizza is better!" This adorable figurine captures the brainiest of the brothers, Donatello, taking a well-deserved break from his inventions. Reimagined in a "cute" chibi style, this model features Donnie with…
Some accessories for the Circuit Witch plushie for a Donatello cosplay. The front and back pieces push fit together. The bo staff comes as three pieces for easier printing or as a single piece for a more sturdy option. If you print the…
Hueforges can be resized, only change the X and Y scale, leave the Z height the same. TMNT Donatello Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150x187.5mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…
Supporto Martello per Cacciaspine per parete attrezzata HWS Honeywall. Consente di sostenere un Martello per cacciaspine con diametro testa di 25mm
This is a 3d printed model of the 6 star TYC 7037-89-1 (AKA TIC 168789840 ) star system. This system is found in the Eridanus constellation and is about 1900 light years away. This system consists of 3 binary systems. 2 of the binary…
Tello bottom attachment plate that clips to the side still allowing the usage of power button
Training Guard for the first Flights Weight 11 Grams Supports needed and require careful trimming
Punto Zero Spiritello Fortnite
Castello ducale di Corigliano Calabro Il castello di Corigliano Calabro è una fortezza risalente all' XI secolo , sito a Corigliano Calabro, nel comune di Corigliano-Rossano , in provincia di Cosenza . È stato definito come uno "fra i…
presente anche file unico per chi ha la fortuna di avere la stampante multicolore
Donatello Bust is a historical warrior or soldier figurine 3d print model, made for collectors and wargaming displays. Print it for tabletop scenery, dioramas, shelf decor, and roleplay or war game armies. The file is print-ready and…
Cover di protezione per Coltello da Intaglio Morakniv mod. 122. Permette di sostituire l'ingombrante custodia plastica in dotazione ed è utile per poter riporre il coltello, ad esempio, in una custodia arrotolabile per il trasporto. La…
The length of the mirror is such that the drone's camera displays both the floor and froward view (see attached image). The clips is stable in place, and during flight the image remains stable. full.stl - covers the full view of the…
Supporto HSW per parete attrezzata Honeycomb Storage Wall per martello/martello compatto tirachiodi. Il supporto può essere inserito nella parete attrezzata utilizzando un inserto esagonale standard.
I wanted a removable LED setup for my Tello, so I printed this up and soldered some LEDs in with some wiring. The printed pieces are not glued, but only held firm with zipties for right now as this is still the beta test for me. Any…
COWABUNGA! DONATELLO DOES MACHINES! 🐢💜 Bring some classic Teenage Mutant Ninja Turtles nostalgia to your everyday carry with this awesome Donatello Turtle Shell Keychain! Inspired by the brains of the Teenage Mutant Ninja Turtles, this 3D…
Print standing, use supports only for the opening at the bottom and hide the seam somewhere in the back.
Puoi stampare le parti diverse con filamenti di colori diversi, oppure puoi dipingerle individualmente. Se la tua stampante è troppo piccola, puoi stampare il modello diviso in sezioni più piccole. É necessario assemblare e incollare le…
Castello Medievale diroccato
Materiale: arricchito carbonio, ABS, PETG alte temperature Viti: numero 6, M2x6mm…
cartello attenzione pavimento scivoloso
To easily install some lights below the sunshade, this clip can be used. Its adapted to fit on Glatz Fortello. Print Settings Supports: Yes Infill: none Filament: use want you want PETG Category: Outdoor & Garden
Cover di protezione per Coltello da Intaglio Morakniv mod. 106. Permette di sostituire l'ingombrante custodia plastica in dotazione ed è utile per poter riporre il coltello, ad esempio, in una custodia arrotolabile per il trasporto. La…
Robusto cestello per filtrare i rifiuti nel lavandino o riporre avanzi di preparazione nel piano di lavoro, e supporto per lavandino rettangolare a gancio
Piattello di supporto per PLA/Abs Category: 3D Printer Parts
Crustello is a smart baking tool for sourdough dough and starter. While it comes with its own proofing bowl, I like to use the King Arthur Baking Company Glass Sourdough Crock for my starter. Glass Sourdough Crock - King Arthur Baking…
materiale da usare PETG riempimento al 15% con 3 pareti laterali ugello da 0,4 mm spessore 0.2 per strato fare supporti.
Tello battery holder. Blocca batteria per Tello, in caso di cadute dovrebbe salvarvi dallo spegnimento del tello evitando di doverlo riaccendere e riconnetterlo.... https://creativecommons.org/licenses/ Print Settings Printer Brand: Prusa…
Cartello Avviso di Pericolo Cavi Elettrici in Tensione con 4 Fori per il Fissaggio. Dimensione 200x100mm.
🔹 Supporto per cartello su birillo 🔹 Questo supporto è progettato per fissare un cartello in plastica sopra un birillo stradale 🛑, ideale per segnaletica temporanea, eventi, cantieri e parcheggi. Grazie al suo design, garantisce una…
made for dji tello charger that charges 4 batterys
Design Measured off the OEM junction box cover to your left. Next a painstaking exercise in OpenSCAD scripting. The previous installer didn't realize that the covers are mirrored, so they cut cable holes in both covers exactly the same. 🤦…
Cartello Attenzione Impianto fotovoltaicoCartello Attenzione Impianto fotovoltaico Per stampa bicolore basta fare cambio filo prima che inizino le scritte nere.
Guards for Tello first Flights
Semplice cartello per cancello carrabile Per avere le scritte nere dopo aver fatto lo slicing basta usare la funzione di cambio colore dopo 5mm.
Cartello parcheggio privato. Non necessita di MMU. 1 cambio colore manuale (tra bianco e rosso). la stampa della P viene fatta in una seconda stampa e va incollata al cartello.