Search results: tire

Sort order

1,584 models

P
Printables4D_Printer

X-Maxx Big Paddle Tires

These tires fit on the Traxxas X-Maxx, which I think is an awesome RC truck: https://traxxas.com/products/landing/x-maxx/ If you want tires that last a reasonable duration, here are links to Traxxas tires that will last far longer:…

Downloads
968
Likes
109
Rating
5
P
PrintablesTor G

Tired of scratches in the print bed

Tired of scratches in the print bed, this solves the problem, this works very well to remove the print from the print bed. It is made of PETG so if you want to use the G code you are welcome. Have used this on many prints and it works…

Downloads
816
Likes
78
Rating
4.67
P
Printablesrorys3D

Off-road tire stack pen cup

This pen cup fits in the office as well as in the garage for some other stuff. Also check out: https://www.youtube.com/channel/UChKp-968z1i5PN29gbR7YfA https://www.cgtrader.com/rorys3d

Downloads
589
Likes
104
Rating
5
P
Printablesdodasch

Presta Valve Tire Sealant Funnel

A small funnel for tire sealant especially for Presta valves (with thread)

Downloads
575
Likes
68
Rating
4.71

Tired Bot Phone & Tablet Stand

Seems like it holds any size phone or tablet.

Downloads
328
Likes
64
Rating
4.5
P
PrintablesPrism08

RC Car winter tire + wheel 235/55 R19, Michelin Alpin 6 tread profile at 1/12

This is my third tire design and this time it's a new tread profile, Michelin's Alpin 6 winter tire. The tire prints without supports and without infill when put on the side. With TPU it should take ca 2 hours per tire (0.3) . The rim is…

Downloads
326
Likes
33
Rating
0
P
PrintablesNicki

Reifen Marker (tire marker)

Markierungen für Reifen. Enthalten sind Drucke für Deutsch und Englisch: VR, HR, VL, HL (Deutsch) FR, BR, FL, BL (Englisch) Schneller Druck mit wenig Material :-)

Downloads
272
Likes
14
Rating
4.83
P
PrintablesMinietec

Tire markers / Reifenkennzeichen

Easy way to mark and label your changed tires. Just remove the cap of the valve, slip on the marker and tighten the cap. Einfacher Weg um gewechselte Reifen zu markieren. Einfach die Schutzkappe entfernen, Kennzeichen über das Ventil…

Downloads
253
Likes
23
Rating
5
P
Printablescrashkg

Presta Funnel for Tubeless Tire

Print with brim. I used PETG and 15 percent infill 2 perimeters. Worked fine.

Downloads
183
Likes
24
Rating
5
P
PrintablesPRSPR

BMW Spare Tire Bracket

BMW Spare Tire Bracket/Mount/Tie Down Plate for E36 E46 E60 E70 and other vehicles (works as a replacement for P/N 71111092276) Fits for wheels with approx. 72.6 center hole and can be tied down with M8 wing nut.

Downloads
165
Likes
24
Rating
5
P
Printablesanoetic

Mammotion Luba AWD 1000/3000/5000 Replacement Turf Tires

My original Luba AWD was losing traction on my thick Saint Augustine grass so I designed these turf tires instead. I went through five different iterations and landed on this as the best design. I have been using them for over a year and…

Downloads
163
Likes
21
Rating
0
P
PrintablesArea51

Car Tire Markers

Easy tire marker for your car - mark when changing tires for winter and summer. Avoid getting the wheels on the wrong way after storage... :) Can be mounted with zip-ties or fits over the air valve for easy placement. Marks (English): RF…

Downloads
150
Likes
30
Rating
5
P
PrintablesSeb_the_printer

Lego Tire Chock in 2 Minutes

Hello! This tire chock was made because my collection of Lego Speed Champion Cars kept rolling of their shelf (which I should have just fixed). I figured that maybe some other people might have the same problem or might just use them as…

Downloads
147
Likes
33
Rating
5
P
PrintablesICMAB - CSIC

Prusa XL: 5 sheet-version of the Antiresonance integrated steel sheet holder

With the release of the PP powder print sheet the XL now has a repertoire of 5 different sheets. For comfort, it's very convenient to have a dedicated storage for each type, especially during calibrations. This remix of the ArISSH can…

Downloads
96
Likes
14
Rating
5
P
PrintablesForker45

Mount Stand for Hudy RC Tire Balancer

I designed this stand to hold my Hudy RC Tire Balancer. The balancer can be hand-held, but the stand makes balancing hands-free and eliminates human factor during the process. When not in use, it can be easily disassembled and stowed in…

Downloads
96
Likes
18
Rating
0
P
PrintablesAdudino

Tire Profile Gauge (just 0.5 g!) - 1 mm = 1 dot

Extreme cheap and fast print, fits anywhere and makes a nice giveaway :) Check your tires for minimum profile or optimum (check your country standards on what you need). Typically you want 3 mm for summer and 4 mm for winter tires for…

Downloads
77
Likes
18
Rating
5
P
Printablesastrophage

Nissan Spare Tire Hook

v2: Status Update & Improvements (2024.02.24) The original model worked amazing well and lasted for over 2 years. However it slowly started to warp & deform from the strain. I redesigned the model (with some engineering help) to increase…

Downloads
53
Likes
16
Rating
5
P
PrintablesDan Rogers

Playmobil Safari Jeep - spare tire

Here's a spare tire for your Playmobil Safari jeep. Long ago I designed the rim. Now here's the spare tire (TPU). This is a hollow tire, with side walls, designed to be installed onto the rim (copy provided). Once your tire is printed,…

Downloads
38
Likes
9
Rating
0
P
PrintablesOndřej Kleger

Distinguishing tire valve caps

My print reccomended tips: 3 perimeters, 100 % infill ASA or PETG 0,1-0,15 mm layer height (important for the thread printing) fuzzy skin on outside walls (for the rougher cap surface) 0,4 mm nozzle use a brim no support needed For the…

Downloads
34
Likes
4
Rating
0
P
PrintableskristofferMAKES

WLtoys P929 30x13,5mm wheels and tires

These will fit the WL Toys P929 and any other similar 1/28th scale car from WLtoys. I made them to fit a more scale body to my car, with narrower wheel arches. I printed the wheel in PLA and I am testing variants of the tire with TPU and…

Downloads
34
Likes
9
Rating
0
P
PrintablesAlexx1810

Couvercle/tirelire de bougie

Idea for reusing glass jars from old IKEA candles Idée pour une réutilisation des pots en verre d'ancienne bougie IKEA N'hésitez pas à partager vos idées de réutilisation de ces pots en verres.

Downloads
19
Likes
0
Rating
0

Radio Flyer Folding Trike Compatible Rear Tire

Radio Flyer Folding Trike Compatible Rear Tire (Right Hand Side, mirrorable) Specs: ID: 7/16" OD: 6.5" Print Settings: Walls: 5 Infill: 15% Cubic

Downloads
13
Likes
0
Rating
0
P
Printablespastaoceanfrog

Tire valve cap (Schrader)

Print your own valve caps for your car and bike. This cap fits a standard Schrader valve. These caps have more threads than normal, so they stick better, and you don't loose them. -Print with 0.1mm layer height for good detail -Add a 10mm…

Downloads
8,645
Likes
791
Rating
4.91
P
PrintablesDice

Threaded Tire Valve Cap

Made for Schrader type valve. (the most common type) Fits mountain bikes, road bikes, cars and motorcycles. 0.15mm tolerance on the default model and 0.05mm on the tight version Optimized for 0.12mm layer height. Please, share your…

Downloads
7,719
Likes
2,271
Rating
4.94
P
PrintablesVC Design

Tire Tread Depth Gauge

Keep your tires safe and legal with this compact Tire Tread Depth Gauge ! This tool helps you instantly measure tread depth to see if your tires still meet the legal minimums: Winter tires : 4 mm reference Summer tires : 1.6 mm reference…

Downloads
5,744
Likes
1,697
Rating
4.91
P
PrintablesZeciortech

Tire pen organizer (Zeciortech TireStyle collection)

Hi All! I discover that you very like my Bridgestone Potenza 6 style phone holder, so I designed also that Rest of models you can find on my profile:

Downloads
5,672
Likes
1,462
Rating
4.98

Tire fidget-gyro

Teren Tire Fidget print-in-place I'm currently having fun modeling moving things that can be printed Print-in-place. I also enjoy modeling off-road wheels, so I combined these two hobbies into this model, I hope you enjoy it!

Downloads
5,100
Likes
593
Rating
4.9
P
PrintablesEcho116

Multiple Styles of Schrader Caps, Tire Valve Cap for Cars, Bikes, Carts, Etc.

From left to right on 2nd image; 1: Round Top 2: Flat Top 3-5: O-Ring Sealing, Plus Cutaways, SAE AS 010 and Metric 2x6mm O-Ring Sized Versions 6: TPU Printable O-Ring Insert for SAE and Metric Sized Caps (Insert so 45 degree angle faces…

Downloads
3,706
Likes
1,660
Rating
4.96
P
Printablesrorys3D

Tire stack pen holder

To make it look more realistic the tires are not precisely centered on top of each other. The model is easily 3D printable without supports. Also check out: https://www.youtube.com/channel/UChKp-968z1i5PN29gbR7YfA…

Downloads
2,783
Likes
344
Rating
4.88
P
Printables3D Rejsen
18+

The source marked this model as adult content.

Downloads
2,450
Likes
1,229
Rating
4.93
P
PrintablesElmkom

Tire

Print with tpu and place over hub https://www.prusaprinters.org/prints/98546-hub

Downloads
2,340
Likes
141
Rating
4.94
P
Printableszbieraj

Bicycle Tire Lever

This is a bicycle tire lever created by Piotr Zbierajewski. Besides being a normal lever it has also 10 mm wrench for those few tensioners which still can be found in the bikes, as well as it has a spoke hook. It has been created with…

Downloads
2,218
Likes
237
Rating
5
P
PrintablesMerandey

Tire for Landy/Ranger 1/8 (3D Sets)

I reworked the "Landy Mini" tire to use it for the Landy/Ranger 1/8. I would like to print the tires by myself, so I scaled the tire from the „Landy Mini by 3D Sets from 1/16 to 1/8. I reworked the tire to print it without support and add…

Downloads
1,874
Likes
165
Rating
5
P
PrintablesGael Lafond

Bike tire lever - easy to print

I needed a tool to change a tire on my bicycle. The design from emac looks great but it's not easy to print. Which ever orientation you put it on the bed, it will require supports. I wanted it to print on the side to use the strength of…

Downloads
1,798
Likes
108
Rating
4.91
P
PrintablesMatthias

car tire bowl

A small bowl in the shape of a tire. A scaled it to be about 80mm in diameter, but everything is possible.

Downloads
1,790
Likes
177
Rating
5
P
Printablesmeet

Remixed Measuring tire groove without supports

Modified version of the original Measuring tire groove from Lopata_225 . I had a problem with printing the inner part that needs supports. Therefore, I modified the model so this part does not need supports and could be printed with the…

Downloads
1,745
Likes
354
Rating
4.83
P
PrintablesSurfalex2000

Prusa XL series: Antiresonance integrated steel sheet holder (curved) (Update: Added 3 sheet version)

I modified the original and fantastic idea from wolffaayyy here on printables. I modified the sheet mount, so that it only has 2 Steelsheets instead of 3 (most of us will probably only have 2. Also a modified it with a better tray…

Downloads
1,703
Likes
386
Rating
4.94
P
PrintablesZeciortech

Tire phone stand (Zeciortech TireStyle collection)

Tire phone stand - basen on car tire - Bridgestone Potenza 6 As I can see you very like that, so I designed also pen and flower / cactus pot (you can find it on my profile)

Downloads
1,468
Likes
330
Rating
4.5
P
PrintablesAcho3D

Tire pencil holder

Pencil holder. No supports. 10 cm tall. Enjoy!

Downloads
1,426
Likes
195
Rating
5
P
PrintablesL

Tires for 1:10 Scale RC Cars

Tires for RC cars, compatible with 3D Sets 3D-printed RC cars ( https://www.3dsets.com/ ). Print using TPU. Mirror the model to print full sets of four tires. Tires have 45mm inner diameter for a tight fit, and therefore can't be printed…

Downloads
1,408
Likes
196
Rating
4.5
P
PrintablesEvery3D

tire cap

tire cap

Downloads
1,352
Likes
487
Rating
4.8
P
PrintablesThibault Perrin

TPU airless tires

Print the tires in flexible materials and the rim in solid materials. The large tires have an internal diameter of 55mm and the small 30mm. External diameter of both variants 90mm. I advise you to draw the rim according to your needs and…

Downloads
1,336
Likes
214
Rating
4.71
P
PrintablesLopata_255

Measuring tire groove

Summary Measuring tire groove Print Settings Printer brand: Zortrax Printer: Zortrax M200 Rafts: Yes Supports: Yes Resolution: 0.09 mm Infill: Full

Downloads
1,318
Likes
864
Rating
4.65
P
PrintablesHobo4ssassin

F1 Tire Stacks Pen Cup

Print two stacks of tires separately and glue them to the base. The recess in the main base and the new base on the tire stack makes gluing easier and stronger. Good for people that have to manually change printer colors. Fuzzy skin of…

Downloads
1,276
Likes
196
Rating
4.56
P
PrintablesTony Virelli

Covert ZYN Can - Small Box That Holds An Entire ZYN Can!

Please Share Your Makes and Give It A Like! I have a friend who loves ZYN, however, he said he doesn't like the fact that the can shows in his pocket all the time, plus with all the other “everyday carry” stuff he has, the ZYN can takes…

Downloads
1,272
Likes
106
Rating
5
P
PrintablesMrFlippant

G&S Tire Grinder slot car tyre truing machine RSM

First, the name. G is for Gaub, or Greg, whichever you prefer. S is for Samson, as in Dennis Samson. His original design for a rotating sanding drum machine for whole axles (e.g. pressed on wheels) inspired this design to a great extent.…

Downloads
1,270
Likes
132
Rating
5
P
Printablescmh

Bicycle tire lever based on Park TL-4

Simple bicycle tire lever based on the design of the now obsolete Park Tool TL-4. There are many different types of tire levers out there, but one of my perennial favorites was the Park TL-4. It was simple, had a nice minimal hook which…

Downloads
1,198
Likes
169
Rating
5
P
PrintablesStenly_G

car rim and tire kechain - OZ racing prodrive P1

Check out my profile to see the full set of wheels and pick your favorite! OZ racing prodrive P1 keychain Tire- continental wintercontact

Downloads
1,111
Likes
148
Rating
5
P
PrintablesTwotone74

SUP-Valve to Schrader-Valve (car tire valve) Adapter

Deutsch Ich habe ein aufblasbares Bodyboard. Das ist gut für Flugreisen, aber die Pumpe ist zu groß um sie mitzunehmen. Deshalb habe ich einen Adapter auf Schrader-Ventil (Auto-Ventil) konstruiert. So kann ich das Board auch mit einer…

Downloads
1,109
Likes
119
Rating
4.86
P
Printablesiceface2

Stacked Tires Pen Holder

You can find this print from a creator on thingaverse. I only modified it a little to be larger and function better with a couple more pens in the holder. I recommend printing with Black PLA at 15-20% infill. Maintain all the same…

Downloads
1,102
Likes
296
Rating
5
P
PrintablesLeonardo Krause

Tire

Truck/car tire

Downloads
1,090
Likes
60
Rating
5
P
PrintablesDR 3D

1:10 Scale RC Drift Wheels And Tires 2 Piece

A new version is available! Here it is! This is a 1:10 scale drift wheel with a 12mm hex. Print the wheel and tire separately. The wheel and tire fit together with two notches. add a thin bead of Super Glue in between the wheel and tire…

Downloads
1,086
Likes
88
Rating
0
P
PrintablesTmpx64

Classic British Pillar Mail Box - Money Bank - Piggy Bank - Tirelire - Gift idea - Gift inspiration - Housewarming

This money bank is big enough to contain coins and bank notes when you are saving for rainy days. The Main Body is a single piece so a color change is needed if you want to have the base in a different color. The Top part screws onto the…

Downloads
1,055
Likes
224
Rating
4.94
P
PrintablesStavdahl

Hose guide roller - avoid hose snagging car tire for washing or air hose

This is my version of a hose guide system, designed to print in two separate pieces. I wanted to avoid using any hardware because, realistically, I would probably forget to remove it at some point and end up destroying it. So I decided to…

Downloads
1,050
Likes
497
Rating
5
P
PrintablesN3EIL

1/24 Scale Tire Rack

A 1:24 scale tire rack for your miniature home garage. Requires 8 M2 x 6 screws to complete assembly of 1 printed tire rack.

Downloads
1,032
Likes
188
Rating
5
P
PrintablesKevin Rem

Printed Tire from TPU

A tire for print by yourself from TPU and a rim that's fit to the tire.

Downloads
1,009
Likes
109
Rating
5

RC plane landing gear wheel assembly: tires and rims

Print Settings Rim Materials: PLA - quick and easy, but could break from UV radiation PETG - should be a bit tougher and less prone to failure Print Settings: Walls: 3 Infill: does not matter (should be solid at all parts anyways)…

Downloads
999
Likes
95
Rating
4.67
P
PrintablesNiko

bike tire removal tool

Introducing our 3D-printed bike tire removal tool, designed for ease and efficiency. This innovative tool features a sturdy hook that latches securely onto the wheel spoke, providing stability during use. On the opposite side, a precisely…

Downloads
996
Likes
91
Rating
4.78
P
Printableslowlandet

Bubbly Letters - Entire alphabet

A complete set of 29 chunky, bubbly 3D letters from A to Å . The letters feature a soft, rounded and playful design, making them perfect for both decorative and creative projects. What's included? The complete alphabet: A B C D E F G H I…

Downloads
976
Likes
460
Rating
5
P
Printablesdjedje_zr7

Stackable tire lever

Tire lever for all bikes

Downloads
965
Likes
118
Rating
4.77
P
PrintablesTmpx64

US MailBox - Piggy Bank - Tirelire - Gift idea - Gift inspiration - Housewarming - Mail Box

While you can insert coins through the letter slot, larger banknotes can easily pass through the top functional flip-down tray. The whole mailbox can be printed and put together within a weekend or less. Although this model necessitates…

Downloads
922
Likes
418
Rating
4.8
P
Printablestonkatommy

Tire Gluing Jig 1/10th Buggy Offroad

I've printed a couple off and made a few adjustments.. Gluing RC Buggy tires can be a bit messy at times. Especially if you're a newbie like me ha! I saw a few "Tire Gluing Jigs" from various RC companies that help to press the tire down…

Downloads
916
Likes
41
Rating
5
P
PrintablesMatt Boyer

Formula 1 Tire Set (No MMU)

Full set of dry Formula 1 tires on a Lewis Hamilton display stand. I've included a blank nameplate STEP file that you can add your own name to. Extrude your name .04" [1mm] on the blank. Someone requested I make this, so I looked to find…

Downloads
889
Likes
237
Rating
5
P
Printablesalfthenerd

Off Road and Street Bash Tires & Rims - Gaslands - Hotwheels Matchbox 1:64 scale

Off road bogger and street bash style wheels, all in one tire/rim combo like Hotwheels 1$ car wheels. The outer diameter is standard hot wheels offroad tire sizes (13mm and 16mm) for .8mm axle (hot wheels dimension). The street bashers…

Downloads
885
Likes
142
Rating
0
P
PrintablesNeuroplant

Airless Tires

6mm Hex-Hub (eg. WPL) 50 mm Diameter

Downloads
883
Likes
65
Rating
0
P
PrintablesDepep1

NOFOAMS - RC AIRLESS TIRE INSERTS (PARAMETERIZED)

Why use NoFoams (or any other 3D-printed foam alternative)? They allow for more tire conformity while stopping the tire from rolling over too much when side-hilling or turning. Designed for use with scx24/ 1/24th scale rc cars however, I…

Downloads
880
Likes
183
Rating
5
P
PrintablesPavel

MLmodel Tatra 815 VT - Tires TPU profil

MLmodel Tatra 815 VT - Tires TPU profil Tento profil slouží pro vytisknutí pneu This profile is used for printing tires Tiskový profil pro pneumatiky pro Tatru 815 VT - Filament TPU Economy/Sunlu od 3dfox Tire print profile for Tatra 815…

Downloads
864
Likes
81
Rating
4.5
P
PrintablesStoneAgeSkillz

Rims and Tire for 1:10 RC

So i made some more rims and tires. This time for Sakura D4, but should fit any 1:10 drift/road rc. Two types in the pack 5 ray and 5x2 ray rim, both for 12mm HEX. Wheels shown are printed in Verbatim PLA and Fiberflex 30D.

Downloads
846
Likes
107
Rating
5
P
PrintablesDonBorste

RC Reifen | RC tire - 1/10

Passend zu meinen Felgen (es werden noch welche kommen) der erste Reifensatz, natürlich gedruckt und in einem eher ungewöhnlichen Aufbau. Die Reifen taugen für die Straße und für leichtes Gelände. Der Druck kommt somit mit nur einer…

Downloads
829
Likes
75
Rating
5
P
PrintablesNuvz

Chevrolet Bow Tie Tire Valve Stem Cap Chevy

This is a simple valve stem cap I made for my Chevy. Great idea for a gift or just to doll up your ride. You may need to print it with a brim! The pre-sliced file is for 5 caps. Color break is at 14.3.

Downloads
798
Likes
97
Rating
5
P
PrintablesMrHanjak

Tractor Tire and Wheels UPDATE (Zetor Crystal 8045/8145)

⚫ Tire and Wheels UPDATE ⚫ I don't like interfering with an already released model. Therefore, this update is standalone. If you choose to print this update, don't print these parts at zetor 8045/8145 Zetor 8045:…

Downloads
737
Likes
72
Rating
5

Requested and Retired parts

***Don't forget to leave a like if you value this listing.*** Requested and Retired parts- NOT A MODEL! Just random parts people requested and a few retired parts that might still be useful. (Links are Amazon affiliate) Remember to block…

Downloads
731
Likes
98
Rating
4.67
P
PrintablesJKM

RC paddle tires

This is the first version of paddle tires for my RC from "Robak". . Robak model: https://www.prusaprinters.org/prints/119715-robak-2 Excellent model - I recommend. . . It works, but printing is not easy, many supports, complex folding =…

Downloads
722
Likes
26
Rating
0
P
PrintablesDavid Calice

1/8 RC Buggy Tire Gluing Machine

Machine that glues tires for RC Buggy 1/8. You need two M3 screws and two nuts for assembly. I recommend 4 walls when printing for greater strength. No need for support.

Downloads
714
Likes
43
Rating
5
P
PrintablesNick__Furry

1/10 rc car tire casting mold

use to cast tires for a 1/10 rc car use a long m4 bolt to hold it together, after first joining the 3 parts with m4bolts

Downloads
708
Likes
190
Rating
0
P
PrintablesBeeTinker

Airless tire for RC car

Please, upload your printed parts here, i would like to see your prints. Some kind remix of https://www.thingiverse.com/thing:523776 , but overall only the rims are from the original design, the tire itself are smaller and ready to print…

Downloads
690
Likes
160
Rating
4.67
P
PrintablesSteve Eckerlein

RC Crawler - 2.2 tire TPU inserts

UPDATE 15/03/25 : added a v2 with bigger outer zone to fill with gyroid pattern. I printed it with 3% infill to have a really soft insert. Print with TPU, no support, no top and bottom layers. Gyroid infill, like 3%. You can experiment…

Downloads
674
Likes
90
Rating
0
P
Printablesdoggy.prints

RC Car Offroad Knobby TPU Tires - Compatible with my Custom Wheels (12 mm Hex)

Designed to perfectly complement my custom drifting wheels (for 12 mm hex wheel carrier), these TPU Knobby Tires offer enhanced grip off-road. No gluing required! You can easily switch between these tires, bare drifting wheels or opt for…

Downloads
664
Likes
113
Rating
5

T-Rex Tire Valve Stem Cap Bike / Car / Etc.

Print neck down. Use supports everywhere, but paint support blockers for the threaded hole. Brim - Yes

Downloads
651
Likes
90
Rating
5
P
PrintablesQrome

RC Airplane Wheel and Tire

54 mm diameter tire and only 8 grams when fully assembled. This is designed primarily for RC planes but can be used with anything. The tire is TPU printed with 0.8mm walls and 0 (zero) infill so that it is hollow and rubbery. The wheel is…

Downloads
650
Likes
59
Rating
5
P
Printablesdoggy.prints

RC Car Onroad TPU Semi Slick Tires - Compatible with my Custom Wheels (12 mm Hex)

Designed to perfectly complement my custom drifting wheels (for 12 mm hex wheel carrier), these TPU Semi Slick Tires offer enhanced grip. No gluing required! You can easily switch between these tires, bare drifting wheels or opt for…

Downloads
645
Likes
111
Rating
5
P
PrintablesmoWerk

Tire Position Valve Caps | Wheel Location Marker Caps

Preparing for tire swap season, these marked tire caps shall help by permanently marking the tire position. Print using PETG , TPU or similar weathering resistant material Print the first 3 layers very slowly to have precise letters…

Downloads
614
Likes
164
Rating
5
P
PrintablesButcher9_9

Tire (Tyre) Deflator Valve Cap

Need to deflate your tires (tyres) for off road and are too cheap for a proper tool? Someone parked in front of your house blocking you in? Well I have the thing for you. Simple, easy . fast and super cheap. Fusion files included. Print a…

Downloads
613
Likes
85
Rating
5
P
Printables253Bigfoot

Tire Ring

Size 13 (USA) ring that looks like a bike or motorcycle tire. Can be resized for a perfect to you fit.

Downloads
612
Likes
84
Rating
4.5
P
PrintablesDieHardBarrett

Tire Stack Pen Cup Business Card Holder

I wanted to create a business card holder for my fav tire shop. I got the tire file from rorys3D at Printables. Had to modify it a bunch and gave it a platform to hold cards. Enjoy :)

Downloads
610
Likes
71
Rating
0
P
PrintablesSTprinting

Formula 1 tire pencil holder with wets and inters.

Pen or pencil holder for racing fans. I wanted a set that included all the compounds used in formula 1.

Downloads
605
Likes
127
Rating
4.67
P
PrintablesNuvz

Ford Valve Stem cap - Tire valve cap

This is a fun Ford valve stem cap for your ride. I printed at .2 starting with black PLA, then blue at 12.0 and white at 14.2 mm. Please read the comments before printing. There are some helpful suggestions as this turns out to be…

Downloads
593
Likes
73
Rating
5
P
PrintablesNick Glennon

Rim Protector Xiaomi M365 scooter changing tire tyre wheel hub saver

Fairly form fitting to the wheel's contour to minimize stress, it has just enough wiggle room to get on and off without a problem. I'd recommend trying to remove them once you have one side of the tire out, otherwise they are effectively…

Downloads
589
Likes
138
Rating
5
P
PrintablesBeek

RC-Scaler Tire Foam 1.9

Dies ist eine Reifeneinlage für 1.9er Reifen von RC-Scalern. Sie sind ausgelegt für einen TRX4 mit ca 4,5 kg. Gedruckt habe ich das ganze auf einem Prusa Mini+ mit Saintsmart TPU 95A ohne Infill und ohne Stützen in 0,25mm Draft. Natürlich…

Downloads
588
Likes
67
Rating
0
P
PrintablesL

3D Sets Buggy/Sandy Tires

Print using soft, rubbery filmanet. Something like Diabase X60 Ultra-Flexible Filament works perfectly. I've used hex infill at 3%, which created essentially empty infill with six internal spokes. Use enough top layers so the tire is…

Downloads
587
Likes
108
Rating
5
P
PrintablesAnton

Tire

Tire Category: Hobby

Downloads
586
Likes
32
Rating
4
P
PrintablesAsa

Schrader Valve Caps - for bike and car tires

Simple model of a schrader valve. The thread of a schrader valve is not standard for Fusion360 so you'll need to add a custom thread. Enjoy!…

Downloads
582
Likes
108
Rating
5
P
Printablescmh

Bead buddy for bicycle tire installation

Simple device which clamps to a bicycle rim to keep the bead from unseating while working with particularly tricky or tight-fitting tire installs. Saw a post on a facebook bike mechanics' forum about the Motion Pro Trail Bead Buddy which…

Downloads
567
Likes
149
Rating
4.88
P
PrintablesDR 3D

1/10 Scale RC Drift Wheels - Grip and Drift Tires

Here are some RC drift wheels. They have 12mm hexes and should fit just about every 1/10 scale on road or drift RC car. The wheel and tire are two separate models and print separately. Included is also an on road tire with grips so these…

Downloads
567
Likes
71
Rating
5
P
PrintablesSpudd78

Funny Wall Sign - "NO TRESPASSING, we're tired of hiding the bodies"

Another Funny Wall Sign - "NO TRESPASSING, we're tired of hiding the bodies", - multi colour print, printed in ZIRO PLA Glitter Twinkling Red and Sunlu Matte white PLA. For more funny signs see my (growing) collection of them here -…

Downloads
566
Likes
245
Rating
5
P
PrintablesQrome

Fat RC Plane Tires and Rims

This is a great alternative for a Tundra Tire or larger Bush Type wheels on your RC plane. Print the Tire with TPU with 2 wall thickness and 10% or less infill. The rim can be printed in PLA with 3 wall thickness or so with 30% infill or…

Downloads
563
Likes
57
Rating
3
P
PrintablesLundiplutzmus

Tire for 608-ZZ (TPU)

Simple tires, printed in TPU, fitting to 608 ball bearings.

Downloads
554
Likes
88
Rating
5

Bike tire bead jack

I have a bike tire that is really tight and difficult to mount to my bike's wheel. I discovered this device when googling for advice and decided to make my own model rather than buy one since it's really simple. It allows you to lever the…

Downloads
545
Likes
142
Rating
4.73
P
PrintablesStoneAgeSkillz

Drift rim and tire for Maverick Strada RX RC car

Rim and drift tire for Maverick Strada RX 1:10 RC car. 12mm hex hub, 88mm in diameter , 31mm wide (62x29mm rim). I printed the rim in ABS and the tire in TPE (Fiberflex 30D), 10% gyroid infill. No glue needed, its a tight fit. If you make…

Downloads
536
Likes
39
Rating
5
P
PrintablesGCZ_CREATION

TIRE RACK 1:10 SCALE

Stay tuned for exciting new projects on INSTAGRAM RC BODY available HERE A 3D printed 1:10 storage rack for 60-70 mm tire. -------------------------------- BUILD GUIIDE (click here) --------------------------------

Downloads
533
Likes
169
Rating
5