8 models
Small Toolmakers Clamp Find the large one here! I designed this little toolmakers clamp for light clamping work such as glue up s. Obviously its not designed for actual machining work but its quite strong for a printed clamp ! Hardware…
Large Toolmakers Clamp Find the small one here! I designed this large toolmakers clamp for light clamping work such as glue up s. Obviously its not designed for actual machining work but its quite strong for a printed clamp ! Hardware you…
My take on a toolmakers clamp. This is the style of clamp that uses the front rod for clamping and the rear rod for leverage. You may be looking for a PARALLEL CLAMP, which has both rods threaded for tightening. Available here: PARALLEL…
This toolmaker's style vise uses a short screw angled into the base that pulls the jaw both down and forward. The screw head at the base-end fits into a cylindrical cam that can be repositioned to one of several notches to give it an…
This is a typical Toolmakers Clamp. I made this using the printed parts plus 2x 8mm threads and a 3mm screw (6mm long) to hold the retaining plate. The 8mm threads I used came from cutting the heads off of bolts 85mm long, but two pieces…
There are two styles of clamps included. They are very similar, but have a slightly different form factor and method of tightening. Of the two I recommend the Toolmaker's clamp, but I have included both for completion's sake. For both…
This is a small threaded plug that allows you to pull the reticle from Mitutoyo toolmaker microscopes. Threads were guestemated as M17x0.5, but are likely some crazy mix of imperial diameter and metric thread pitch. It worked for me… YMMV
This is a fitted case I designed for the Starrett No. 815 Toolmaker’s Hammer — the tiny hammer with a built-in magnifier. The case keeps it safe in your toolbox and prevents the magnifier from getting scratched. Included files: STL (ready…
