Search results: tunnel

Sort order

454 models

P
PrintablesAryser

Funnel for PET Bottle with tunnel for escaping air

Print: I printed with PETG with 0.3mm and variable layer height (because of thread). A brim is recommended. Food safety: at own risk. Depending filament and print. Please let me know your experience. 2024.5.06: version without air…

Downloads
4,366
Likes
1,197
Rating
4.9
P
PrintablesIvo

Hotwheels tunnel connectable

Designed a tunnel for my hotwheels fanatic. It's a 4-lane tunnel for four cars or 2 (1:64 scale) monster trucks. The standard hotwheels connector fits on both sides. The top has a row of holes, for a hotwheels emblem. The emblem also…

Downloads
407
Likes
126
Rating
5
P
PrintablesSpeakingOfBrad

Brad's IKEA LACK Filament Tunnel

I really liked ChipCustomizer's filament tunnel , but I had problems with it breaking at the layer line on the screw part if I accidentally tightened it too much. So I recreated it with thicker walls. The tunnel has a 10 mm outer diameter…

Downloads
326
Likes
43
Rating
5

Train Bridge / Tunnel for Brio Type Trains

A support for the Ikea/Brio type train bridge. It will fit slightly larger than typical trains. If you like this model check out this collection of my other toy train models.

Downloads
318
Likes
69
Rating
4.75
P
PrintablesAdam

Viaduct support tunnel for Brio / Ikea wooden toy train set

This is a support for a viaduct to use with Brio and compatible wooden toy train sets (Ikea Lillabo, Melissa & Doug, Thomas & Friends, etc.). It's designed to grip a 40mm wide wooden track segment, and features a tunnel underneath wide…

Downloads
91
Likes
18
Rating
5
P
PrintablesMr Print

Hotwheels track 4 lane tunnel

Fun Hotwheels tunnels for 4 lane raise track or 2 lane monster truck race. Can be joined together to create longer tunnel, why not create your own little Monaco

Downloads
76
Likes
19
Rating
0
P
PrintablesHank

The Ultimate Cat Thru-Wall Tunnel

This assembly allows my cat to get into the room that contains the litterbox while depriving our dog of equal access. It can be adjusted fit the width of typical, interior, non-load bearing walls. I initially considered putting it through…

Downloads
20
Likes
1
Rating
0
P
PrintablesRoger Yargen

Windtunnel CoolerMaster Master Frame 600

Wind Tunnel This is another custom front-panel design for the MasterFrame 600 for the CoolerMaster FreeForm Competition. The model is based on the wind-tunnel principle used in the HAVN 360 case. The goal is a straight, unobstructed…

Downloads
11
Likes
2
Rating
0
P
PrintablesSpike Mix

Underground corner tunnel for aquarium/ fish tank

Burry the tunnel under your aquarium soil or gravel and let your fish explore it. All the edges are rounded to protect you fishes' fins. With dimensions of 140mm x 140mm and a 37mm roof height, (50mm overall height, including the…

Downloads
7,274
Likes
1,313
Rating
4.9
P
PrintablesJerrod H

Modular Wind Tunnel for STEM Education

Minor Update - 14 Feb 2025: 3DBenchy model restored to the package now that it is in the public domain . Major Update - 21 Jan 2025: The Modular Wind Tunnel for STEM Education and its accessories are now FREE and published under a license…

Downloads
3,086
Likes
1,658
Rating
5
P
PrintablesKamteix

Betta fish tunnel

/!\ Be careful when printing accessories for pets /!\ When selecting add-ons, ensure they are appropriate for your fish. This product is specifically designed for Betta fish and may not be suitable for smaller species.…

Downloads
2,447
Likes
295
Rating
4.62
P
Printableskfernald

Fish Tank Tunnel

This is a tunnel for our crayfish tank for him to be able to hide underground. It has ridged steps so this should work for other critters or fish too. Dimensions: Bottom to top: 76.2mm Bottom to sand: 57.15mm Total width: 438.55mm Depth…

Downloads
2,216
Likes
389
Rating
5

Model Train Tunnel Portal - N, TT, HO, & O Scale

A collection of various sized tunnel portals in N, TT, HO, and O scale to be used as tunnel entrances. They feature a stone texture as well a prominent keystone that can be inscribed with your railroad's initials, logo, or tunnel number.…

Downloads
2,214
Likes
180
Rating
5
P
PrintablesChrisGamer

Tunnels Ho 1:87

Diverses entrées de tunnels Ferroviaires et Routiers

Downloads
1,869
Likes
134
Rating
5
P
PrintablesDer.Hubi

Tunnel for BRIO - Mountain

This is a tunnel remixed from BasD's "Model Train Tunnel". The tunnel is scaled to fit common wooden train track systems (e.g. BRIO, IKEA etc.) and has flattened bottom. There is an addition track of 162mm (in BRIO terminology A1+A2)…

Downloads
1,631
Likes
262
Rating
5
P
PrintablesBenjamin

GRAVITRAX tower with marble track channel. Gravitrax kompatibel Turm mit Ball Kanal. Gravitrax Tunnel

This Tower is 140mm high and has an inner channel for balls. No print support structure needed. Thanks for download. 09/01/24 update outlet See video for demonstration:

Downloads
1,614
Likes
226
Rating
4.71
P
PrintablesDer.Hubi

Train tunnel with overpass

Update 06.02.2025: Added Version 2 with slight adjustments to the rocks, next to the rail. Added STL-File. --------------------------------------- There you go, a small tunnel with an overpass, derived from jdormer9 's perfectly designed…

Downloads
1,544
Likes
456
Rating
5
P
Printablesduebelpapst

Spur N Tunnelportal 2-gleisig / N-Scale tunnel portal 2-track

Die Abmessungen des Tunnelportals betragen: Breite = 112 mm Höhe = 90 mm Gleisabstand = 38 mm Steinformat = 4 x 2 mm Ich drucke mit weißem PLA. The dimensions of the tunnel portal are width = 112 mm height = 90 mm track distance = 38 mm…

Downloads
1,524
Likes
78
Rating
4.67
P
PrintablesDer.Hubi

Train Tunnel for BRIO - Mountain with overpass V2

This is a tunnel remixed from my remix of BasD's "Model Train Tunnel". The tunnel is scaled to fit common wooden train track systems (e.g. BRIO, IKEA etc.) and has a flattened bottom and an overpass that crosses the mountain…

Downloads
1,361
Likes
246
Rating
5
P
Printablesohmikegoodness

Hamster or Small Pet Log Tunnel

Simple hollowed out log for decorations in pet cages and aquariums. Printed with 3 Walls, 10-15% infill, and supports for the interior.

Downloads
1,344
Likes
202
Rating
5
P
PrintablesHeidi Makes

Parametric Ear Plugs and Tunnels

This SUPERSET includes ear plugs and tunnels from 6mm to 30mm diameter and the original parametric FreeCAD file that you can use to create any size of plugs and tunnels. Quick and easy print! Print a pair for each nice filament you have…

Downloads
1,196
Likes
182
Rating
5
P
PrintablesStefan

Tunnel for Gravitrax V2

The stones are as high as 2,5 height stones. There are two parts on every design. Print the inlay up side down and glue them together. For the STLs use the “split to object” function in Prusaslicer to split the parts. Update 2022-04: I…

Downloads
1,048
Likes
115
Rating
4.75

Ear Gauge and Tunnel - 1 Inch

Did a simple resize and hollow of the blank gauge, printed and measured with calipers. Print both or use Microsoft 3D Builder or Meshmixer to split them. Category: Earrings

Downloads
1,032
Likes
89
Rating
5
P
PrintablesMiceciCZE

MAZDA 6 Center Tunnel ORGANIZER

Recommended material ASA / PETG Print settings Layer height = 0.3 Perimeter = 2

Downloads
998
Likes
25
Rating
0
P
PrintablesPatrick

Tunnel and Walls for H0 scale Modelrailway

WIP! As per special request by my dad, I am designing a fully modular tunnel system. The first modules are ready for everybody to test. More modules will follow, including pillars in various angles, shorter segments of wall as well as…

Downloads
907
Likes
101
Rating
5
P
PrintablesSchweizermaker

Wooden train mountain tunnel with integrated track

Tunnel for wooden trains (BRIO, Ikea LILLABO, Eichhorn etc) with an overpass crossing the mountain. This is really just a merge of the 2 source STLs, so all creative credit goes to those creators: https://www.thingiverse.com/thing:4971864…

Downloads
856
Likes
133
Rating
4.5
P
PrintablesChoumarin

Arch / bridge / tunnel for Lego train

This is an arch to create bridge and / or tunnels for Lego train tracks. It's designed to support 2 train tracks at their connection point. It measures 12 bricks high, which is enough for most trains, 16 bricks wide and 4 bricks long. It…

Downloads
783
Likes
164
Rating
4.67
P
PrintablesNoMatter

Model Train Railway OO Tunnel Entrance Stone

Pair with https://www.printables.com/model/1048539-model-train-railway-oo-tunnel-stone/collections

Downloads
772
Likes
63
Rating
5
P
Printablesdhiertz

washing tunnel for firefighting hose

This is a washing tunnel for firefighting hose with Gardena connection This tunnel works great for C-Storz fire hoses and we tried it also with B-Storz hoses. I printed it with PETG 3 perimeters 5 top and bottom layers 100% infill…

Downloads
769
Likes
141
Rating
5
P
Printablesdiktux

BRIO & Lego Duplo tunnel/ bridge crossing

Brio rails on the top as a crossing. Possibility to use the lower level as a tunnel. Can be extended with Lego Duplo. Can be stacked. Old version on the image

Downloads
766
Likes
125
Rating
3.8
P
PrintablesNoMatter

F1 Tunnel Boat 1/10

Hi. I'm Raf founder of NoMatter. I created this model as part of a test for bigger-scale F1 tunnel boats. I never found a decent, usable 3d printable model of the F1 boat that resembles the shape of the real thing. This model is the…

Downloads
758
Likes
62
Rating
4
P
Printableszababa

Tunnel

Tunnel is compatible for all types wood train sets (BRIO, IKEA, LIDL,…). Suitable for PLA and PETG material. For error-free printing is recommended set printing supports to organic type.

Downloads
717
Likes
171
Rating
4.75
P
Printablesjdormer9

Tunnel for Wooden Track Train

Tunnel for Wooden Train Tracks – Compatible with Brio, IKEA Lillabo & Playtive Bring adventure to your child’s wooden railway with this realistic rock-style tunnel . Specially designed to fit seamlessly on most wooden train tracks ,…

Downloads
658
Likes
139
Rating
5
P
PrintablesGigaPenguin

Underpass/Tunnel + Garage with Car Park Diorama (For Hot Wheels & 1/64 Scale Cars)

Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…

Downloads
594
Likes
176
Rating
5

Tunnel N 1:160

Model train tunnel scale 1:160 for 3d priting.

Downloads
569
Likes
42
Rating
5
P
PrintablesBamBam Design

Tunnel - Lego Duplo / Hubelino compatible

Great additional Tunnel Set compatible to Hubelino® a Marble run for Lego® Duplo®. Its for marbles around Ø25mm. You can choose 2x2, 3x2 and 4x2 length. Did some optimization for better printing, like connected stud holes, thicker walls…

Downloads
561
Likes
81
Rating
5
P

Splitter Diffuser Tunnel for Race Cars

Splitter Diffuser Tunnel for Race Cars splitters etc. Quite large, you may want to scale it down depending on your application. Print Settings Rafts:No Supports:No Resolution:0.2 Infill:100%

Downloads
542
Likes
25
Rating
0
P
PrintablesTom Wilkie

Desktop Wind Tunnel

Inspired by Windsible , I built a desktop wind tunnel for 1/43rd scale model race cars. I use it to visualize the flow of air over them with a small smoke machine - I’m not looking to take measurements off of it (yet!) I went through a…

Downloads
542
Likes
112
Rating
5
P
PrintablesBl0b7213

Tunnel Portal

Double track tunnel portal for HO/OO scale. Includes model split in two for smaller printers V2 Print flat on bed 0.3 - 0.2mm layer height V1 Print flat on bed 0.07mm layer height Use variable layer height for best results

Downloads
519
Likes
21
Rating
0
P
PrintablesJ.S.

Gravitrax Junior tunnel 5cm

This model is an Extension with a straight tunnel. It is compatible with the Gravitrax Junior Marble Run. I optimzied this model: https://www.printables.com/model/744471-gravitrax-junior-compatible-tunel I used the tolerances of this…

Downloads
477
Likes
39
Rating
4.5
P
PrintablesORM

Gravitrax tunnel spacer

A tunnel spacer to be used together with my Gravitrax base tile . It adds 10mm to the height of the base plate and can be stacked with all types of Gravitrax building elements above. No support is required if printed upside down as…

Downloads
442
Likes
89
Rating
5
P
PrintablesNoMatter

Model Train Railway OO Tunnel Stone

Railway OO Tunnel Section Stone. Inspired by British Victorian railway tunnels. Print in resin at 0.05 hight if possible. Test print in the photos achieved with Anycubic X2 at 0.05mm Z hight. Use in pair with a tunnel front. Enjoy

Downloads
432
Likes
40
Rating
0
P
PrintablesSJM

H0 Tunnel / Tunnel Wooden Rails like Brio/Ikea 1:87

H0 Tunnel 1:87 works for Märklin C-Gleis and other brands like Roco, Fleischmann, Piko. H0 Tunnel, single track, with small windows and without windows, connectable with connectors. Length of the tunnel is 195mm (~7.7in). Caution: It is…

Downloads
414
Likes
63
Rating
5
P
Printablesoxygene

Tunnel (Gravitrax compatible)

Tunnel with one straight and two sharp curve lanes. The height of the tunnel is 2.5 height units. It goes well together with the original Gravitrax Flip extension. Just add one more height unit as the flip raises the marble 3.5 height…

Downloads
408
Likes
76
Rating
5
P
PrintablesSe

Train Track Intersection with Tunnel and Bridge for Wooden Toy Trains

Remix of the following designs: https://www.printables.com/model/255855-brio-compatible-standard-h-cross-track by @PrintATrain https://www.printables.com/model/329413-brio-wooden-train-tunnel by @Daniel_5163…

Downloads
398
Likes
53
Rating
5
P
PrintablesIgnis Veneficus

Brio mini: Castle tunnel

Tunnel with castle for brio mini track set Need the tunel openscad for the scad file brio mini tunel The island is so big, can be placed a circle track around. In the castle file I fixed some parameter and changed some settings. I try it…

Downloads
384
Likes
57
Rating
4.33
P
Printablesxam247

360 Tunnel and Train Track Riser

Wooden train tracks like Brio can be even more fun when the options for tracks expands. Go two or even three layers of trains coming from any angle over the other with these 360 Tunnel and Train Track Riser. Trains go through Trains can…

Downloads
378
Likes
87
Rating
5
P
PrintablesJan

Tunnel for a wooden train track

Tunnel for a wooden train track , printed from PLA material, without supports. UPDATED 4. 6. 2022!

Downloads
377
Likes
45
Rating
4.4
P
PrintablesBas

Model Train Tunnel

A simple train tunnel to fit over you model railroad I made while learning Blender sculpting. The tunnel is not to scale for a particular track width, the tunnel mouth is be around 7x10 cm. Scale it to fit as needed. The underside isn't…

Downloads
373
Likes
52
Rating
5
P
Printablesdiktux

BRIO spiral tunnel

Tunnel for BRIO train No support needed

Downloads
372
Likes
66
Rating
4
P
PrintablesTigerTone

Cthulhu: Death May Die Tunnel/Corridor Token

This is a 3D replacement tunnel/corridor token for Cthulhu: Death May Die. You will need to print 2 of these for the game. I have remixed this from changeagent - Iphone Speaker Tunnel on thingiverse https://www.thingiverse.com/thing:59872…

Downloads
370
Likes
38
Rating
5
P
PrintablesSebastian K

H0 Gauge (High Speed) Train Tunnel

I print these on my MK3S with 0.3mm Layer Height and 0% infill. Tunnels like this can be found on German High Speed Railway like the Schnellfahrstrecke Hannover Würzburg.…

Downloads
364
Likes
26
Rating
5
P
Printablessupertruper1988

Small Train Tunnel Wood Track or HO

My kids needed a tunnel for their wooden trains and we just started with HO so I made it tall enough for some track on the floor. I made this by using the sheet metal tools in Fusion 360.

Downloads
360
Likes
46
Rating
5
P
PrintablesPrimermecos

ear plug - flesh tunnel in 20 mm and 10 mm diameter

I remix this thing to create a flesh tunnel and made a hole with a bulge in it. The wall of the 20 mm and the 10 mm tunnel is at least 1mm thick (in the middle a bit more). I have not tried to print the tunnels with a fdm printer yet…

Downloads
355
Likes
23
Rating
5
P
PrintablesStorbi3D

Tunnel for aquariums / fish tanks

Found only paid tunnels on Cults. So i build my own one. You can scale it in every dimension. Print without support.

Downloads
350
Likes
30
Rating
5
P
PrintablesDaniel

Brio Wooden Train Tunnel

I wasn't quite happy with all the existing options so I took ideas from several places and put them together to make just what I was looking for. I hope it fits your needs as well! I designed these to fit my Brio and compatible tracks, so…

Downloads
348
Likes
74
Rating
5
P
PrintablesHondzik

SureFlap tunnel extender

The original tunnel extension is obscenely expensive, but what do we have 3D printers for?! :D

Downloads
343
Likes
13
Rating
5
P
Printablesgameyspirits

Heat: pedal to the metal board game insert w/ sleeved cards w/heavy rain w/ tunnel vision NO LID LIFT

Insert/ Organizer for Heat Pedal to the Metal board game. Supports sleeved cards Supports Heavy Rain expansion Supports Tunnel Vision expansion There are individual player holders for the car, shifter, starter cards, 7 heat cards, and 3…

Downloads
334
Likes
65
Rating
5
P
PrintablesJakesterDS

G scale train tunnel entrance

Tunnel entrance for g scale modeltrain. For trains without pantograph.

Downloads
332
Likes
33
Rating
0
P
PrintablesMiguel M.

Sand Castle Gate/Arch/tunnel Form

This is a form for creating castle gates, arches and tunnels with sand. this simply gives you something to pack sand against and creates a clean opening in the sand. One version has a flange that simulates a stone arch patern. If you want…

Downloads
327
Likes
153
Rating
0
P
PrintablesGage

Cat Stargate Tunnel

Perhaps in homage to one of my all time favorite TV shows, or maybe in hopes that it will actually send my cats half a galaxy away to use the litter box, either way it makes me smile. (The cats are indifferent.) The portal allows them…

Downloads
325
Likes
119
Rating
5
P
PrintablesDave

Modern Tunnel Portal (Rectangular)

NEM 105 compliant cross section You can find the design on Onshape - and customize it to your needs (e.g. length, number of slots, slant angle)

Downloads
301
Likes
29
Rating
5
P
PrintablesJerrod H

Diffuser and Fan Upgrade Kit for Modular STEM Wind Tunnel

Updates 2024-06-18 : Added an alternate design for the downstream diffuser section, suitable for a generic fan with a 200mm flow area and face mount. Provided mounting pattern works for Noctua NF-A20 and EBM-Papst K1G200-AD65-04 .…

Downloads
299
Likes
74
Rating
5
P
PrintablesKDima

Wooden train tunnel "Eye of gods" compatible to IKEA set

Model can be printed without supports and brim - all angles are printable, in roof added internal supports. Printed with 3 layers on perimeter. Shared 2 versions: Wooden_train_tunnel - classic tunnel.…

Downloads
288
Likes
44
Rating
5
P
Printableshumvee3D

K1 Lid Riser corner with bowden tube tunnel - JC-Creality K1 Lid Riser MOD

After modifying my K1 with the side spool holder and filament sensor bracket from MDFPereira (https://www.printables.com/de/model/507110-creality-k1-side-load-spool-holder-version-2) I also wanted the lid riser assembly from @ Joe Cooper…

Downloads
288
Likes
33
Rating
5
P
PrintablesDn3d

H0 Tunnel portal 2-track similar Noch Profi/ H0 Tunnelportal 2-gleisig ähnlich wie Noch Profi

English The idea was to create a tunnel portal similar to the detailed Noch Profi Tunnel. It is designed and scaled to nicely fit two tracks in H0 scale. I recommend to print it horizontally (obviously) and use only one or two bottom…

Downloads
286
Likes
14
Rating
5
P
PrintablesSwan_Kikaku

Tunnel Tiles for Gravitrax V2

These are tunnel tiles. - you can put other tiles on them. They come in two angles: 120 degrees and 180 degrees. Initially I designed for my zigzag models. I'm sure you'll want to use them for the bottom layer of zigzag.…

Downloads
284
Likes
35
Rating
5
P
PrintablesMarkus Brunner

H0 Tunnelportal breit

für H0 Modelleisenbahn 1/87

Downloads
276
Likes
27
Rating
0
P
PrintablesDer.Hubi

Train Tunnel for BRIO made of KAPLA

Here you go! Create your own tunnel for your toy railway train, e.g. BRIO, with KAPLA planks. Use the tunnel extension for longer tunnels. The parts are provided with a slight friction fit so that your tunnel does not fall apart when you…

Downloads
268
Likes
59
Rating
5
P
PrintablesThe Retro Relic

Parametric flesh tunnel double flared (earring)

Parametric flesh tunnel (earring). Plastic is a great alternative to metal for colder climates that may effect the blood flow in your ear lobe. Do your research before choosing a material for printing. if you would like a specific size…

Downloads
263
Likes
32
Rating
0
P
PrintablesAriel Warsh

Water Bottle Funnel with air tunnel 2

Same as my previous model but has a ring to attach to a backpack.

Downloads
262
Likes
72
Rating
0
P
PrintablesMagig_I3Prusa

Railway Rough Stone Tunnel Long

it prints in 0,3 as with no support use a may overhang of 75Deg to generate Have fun i used Bridge mode for the inner roof to be fine PLEASE Like the creation

Downloads
254
Likes
24
Rating
0
P
PrintablesJB923

Fish Tank Tunnel

Tunnel for fish to swim through.

Downloads
248
Likes
43
Rating
0
P
Printablespittance

Wind Tunnel Desk Fan - Fan V5: PC 120mm

This is the fan version where I gave up and made something practical. I've got a few fan designs, including some that aren't uploaded (you won't find V4 because it's not very useful but I might upload later, for now we're skipping a…

Downloads
248
Likes
62
Rating
5
P
PrintablesAlex

Montessori Rainbow Tunnel Stacker and Puzzle

This is a sort of copy after Montessori Rainbow Tunnel Stacker and Puzzle that I designed to print it for my kid but I have't have the change to get all the colors that I need. Maybe you guys have the colors and give it a try.

Downloads
242
Likes
93
Rating
5
P
Printablesmigrvnes

Vertcial Laptop Stand /w Cable Tunnel - Quad Laptop Charging Station

Designed and Printed for a co-worker who needed to hold chrome books for his children. It is made to fit almost* any laptop from a thin MacBook-Air to a Chromebook with a hard-shell case on it. This is a large print, please be sure to…

Downloads
239
Likes
32
Rating
0
P

Aquarium tunnel

The supports are only for inserts, you can glue them, or you can just insert them, resting against the wall of the aquarium under the weight of the soil, they will not go anywhere, approximately 100 grams of plastic. Original size 15x15x4.5

Downloads
236
Likes
49
Rating
5
P
PrintablesToukejin

Aquarium Tunnels

My sister wanted some suction tunnels for her fish tank. There's slots on top and texture all around for moss to attach to / hang through. We decided on PETG, but do your own research about what filaments are safe for aquariums. Print…

Downloads
229
Likes
92
Rating
0
P
PrintablesMicHael

Ohrring/Tunnel /ear tunnels

Der Durchmesser des Tunnels beträgt 28mm. Gedruckt wurde der Ring mit Esun ABS+, der Propeller Extrudr Durapro ASA Neon-Grün. Nachträglich wurde eine 3mm Schraube als Stift ersetzt. Der Tunnel ist auch beim Sport angenehm zu tragen da er…

Downloads
226
Likes
32
Rating
5
P
PrintablesŠnvać

TUNEL/TUNNEL TT/H0/N/Z

TUNEL ZA MODALNU ŽELJEZNICU U MJERILA TT/H0/N/Z. MOGU NAPRAVITI JOŠ NEKE DRUGE MJERILA.

Downloads
225
Likes
22
Rating
5
P
PrintablesMikiCab

Rat Trap Tunnel

Rat Trap Tunnel. Helps prevent other animals from getting caught in the trap and forces rats and mice to enter to more likely trigger the trap. Bonus for USA residents in that you can put 2 inch PVC pipes onto the openings if you believe…

Downloads
222
Likes
31
Rating
5
P
PrintablesNagtsnegge

Curved tunnel cover for H0 C-track R1 30 degree

I designed this tunnel cover to build a tunnel through a mountain. This segment fits exactly over a C-track curve with 30 degrees (R1). It is high enough for all types of trains to fit through.

Downloads
216
Likes
13
Rating
5
P
PrintablesLoboCNC

Tunnel of Despair Live Mousetrap

My Havahart 1020 live mousetrap never fails to catch a mouse. After watching way too much mouse-cam video of mice romping in our crawlspace, the mice have absolutely no hesitation in entering the Havahart trap, and they almost never come…

Downloads
208
Likes
27
Rating
5
P
PrintablesDave

Modern Tunnel Portal (Elliptic)

Inspired by the portal of the Grauholztunnel NEM 105 compliant cross section You can find the design on Onshape - and customize it to your needs

Downloads
207
Likes
15
Rating
0
P
PrintablesJerrod H

EMT Conduit Stand for Modular STEM Wind Tunnel (RepRack-inspired)

Introduction This is an alternate approach for supporting the Modular Wind Tunnel for STEM Education on a tabletop. The default stand included with the main tunnel uses discrete printed feet. While these are simple, fully printable…

Downloads
207
Likes
48
Rating
5
P
PrintablesJerrod H

Aerodynamic Drag Basics : LabPack for Modular STEM Wind Tunnel

Included are 5 simple wind tunnel test articles for the Modular STEM Wind Tunnel , intended for use with smoke visualization to concisely demonstrate the concept of streamlining and show how the wakes behind different geometries can vary…

Downloads
205
Likes
26
Rating
0
P
PrintablesBootjevaarder

Railway Tunnels N Scale

Simple N Scale Railway Tunnels. Upscale the tunnels to H0 or any other scale. Printing I printed with PLA, 0.2 mm layer height.

Downloads
197
Likes
24
Rating
0
P
PrintablesJerrod H

Miniature Modular STEM Wind Tunnel Display Model

How do you determine the performance of a wind tunnel design? Test it in a wind tunnel, of course! Okay, okay, that's absolutely not true . What is this for, then? This is just a way for anyone to easily print a token scale model of my…

Downloads
191
Likes
28
Rating
0
P
PrintablesMarkus Brunner

H0 Tunnelportal gross

H0 Tunnelportal für H0 Modelleisengbahn

Downloads
187
Likes
14
Rating
0
P
PrintablesMagig_I3Prusa

Railway Scale Tunnel Portal Front FDM ( Nosupport ) Easy Fastprint

as you see i printed it upside down no support at 0,3 use bridge mode and ofcause the 75deg max overhang HAVE fun There is more of this stuff search my modells on Printables her in Modell tab !! PLEASE like the Models as you download them

Downloads
182
Likes
16
Rating
0
P
PrintablesPeteJ

Clay Stamp Balls 02: Graduated Little Tunnels

This is the second in my series of easy-to-use clay rollers for embossing clay. You'll find a link to a collection of my clay and pottery models at the end of this description. Here's another fun way to add texture and patterns to clay…

Downloads
181
Likes
81
Rating
0
P
PrintablesMoosybuilds

Functional AE86 1:32 Dyno Diorama with Engine Sound & Wind tunnel

A 3D printable functional AE86 Sprinter Trueno dyno diorama build. This is intended to suit a 1:32 AE86 diecast model. Printed with PLA/PETG/TPU - Please find more details in the attached PDF (Guide-sort of :)) You can also see some build…

Downloads
179
Likes
30
Rating
0
P
PrintablesScalecast

OO / HO Scale Model railway Timber tunnel

This is a detailed and well grained timber model railway tunnel mouth. I suggest you print it flat and with the grain upwards. I make model moulds at scalecast.co.uk and this used to be one of the moulds we made and sold, but as we have…

Downloads
177
Likes
15
Rating
0
P
PrintablesJacques

Pleco Fish Cave/Tunnel

Cave for fish to hide in or for spawning

Downloads
166
Likes
15
Rating
0
P
Printableshereforfun
Downloads
165
Likes
40
Rating
5
P
PrintablesKayaah vinyle
Downloads
162
Likes
20
Rating
0
P
PrintablesJerrod H

Remixable Interfaces for the Modular Wind Tunnel for STEM Education

The Modular Wind Tunnel for STEM Education is distributed in the Printables Store and is therefore automatically licensed with a Standard Digital File license that, unfortunately, limits the community's ability to contribute to the…

Downloads
161
Likes
27
Rating
0
P
PrintablesAcedra2

12 mm Ear Gauge and Tunnel Holder

I couldn't find anything that would keep all my gauges and tunnels in one place other than an old coffee cup. Even then I had to dig around for what I was looking for. I designed this for personal use but figured I would put this up for…

Downloads
161
Likes
28
Rating
5