THE VISION OF THE ARMED FORCES OF UKRAINE
https://www.mil.gov.ua/en/news/2020/01/11/the-vision-of-the-armed-forces-of-ukraine/
- Downloads
- 364
- Likes
- 94
- Rating
- 5
188 models
https://www.mil.gov.ua/en/news/2020/01/11/the-vision-of-the-armed-forces-of-ukraine/
Glory to Ukraine! Glory to the Heroes! 4 Designs for printing in Ukraine's state colors, blue and yellow. You don't need an MMU and the provided gcode has a filament change pause. gcode files: (B) in the filename, for Blue color first…
If you're going with the STL file, supports should be added for the half-circle USB connector « emplacement ». Printed at 0.3 mm layer height. The 3MF and GCODE files already contain the needed supports and a color change at half-height…
Coin with the Ukrainian "tryzub" engraved in it. Uses art from PublicDomainVectors.org .
My 9-year-old daughter is wanting to help support Ukraine, and decided to make cookies to sell, donating the proceeds to the relief effort in Ukraine. I designed this cookie cutter for her cookies - she plans to make simple sugar cookies,…
Basicly the same flag but with a ø3mm hole to use it as a keychain. I also rounded the edge so you can attach more keys. Round about 30x20x7.5mm with a width of about 2mm Change the color at 10mm
Ukraine Tradition: Christmas Tree Spider Origins in a folktale: The tradition comes from a touching story of a poor widow who couldn't afford ornaments for her children's Christmas tree. Kind spiders spun glistening webs all over the tree…
For best results place face down on build plate mmu required I will allow prints to be sold if profits are donated to help Ukraine
Able to be printed with colour change at 3mm height or 3 separate files for easier mmu colouring. I will allow prints to be sold if profits are donated to help Ukraine.
MultiColor Ukraine Plaque Dont need multicolor printhead... just use change at z height.. Gcode is for COre One.
A model of Saint Javelin of Ukraine was designed as a support for Ukraine during its invasion by Russians. This model is not mine, nor was made by me. I'm just uploading it since it's not here, I enjoy it, and I want to share it. Original…
Print out the Ukraine Coat of Arms now! At Fame models, we put our very best in making high quality 3D models for printing. If you have any feedback, please comment it below!
Print in vase mode with a 1.5mm base.
Model of the Ukrainian Coat of Arms (Trident). The model is dimensionally accurate according to the Wikipedia and can be resized as desired. Feel free to use or modify as you wish. Coat of Arms of Ukraine - Wikipedia
Ukraine Key Cap. If you are getting triggered by looking at the letter Z here is a nice solution.
A small Ukraine flag themed token & keychain.
This is my rendition and perfect scaling of the famous sign outside the city of Pripyat. While not the city of Chernobyl, this was a very close city and a majority of the Nuclear Power plant workers actually lived in Pripyat. This thing…
Print the two parts separate and connect them after printing. It is just one click.
Fashioned after the flag used on fb At 3 mm height the badge will be nice and sturdy. If you look for really fast print, height of 2 mm is okay. Including Prusa MINI g-code that is economical (any base color, then blue, yellow on top, 30…
SUPPORT UKRAINE Hello all! Last year I raised money to help support those in Ukraine who were forced to leave the country by selling stickers and paper based items. This year, however, I decided to put my Ender5+ Printer to work by…
So far I've designed my countryballs for special occasions. I would have never thought war will be one of them. Russia's invasion of Ukraine has been going on for almost three months now. Ive designed this Ukraineball as a way to salute…
Ukraine Trident. Fixed in Blender and Microsoft 3d Builder. Updated and fixed 4/19/2023.
Update 2022-03-10: Added simple model without mounting hole (when you just want to glue different pin) Update 2022-03-07: The license has been changed to meet the open definition, so you can sell copies and donate profits in support of…
Due to recent events, I made this topographic map of the Ukraine. Scale of the model is 1:5'000'000 with a vertical exaggeration of 10. My print was done at 50% xy scale and 250% z scale leading to a overall vertical exaggeration of 50…
Designed for 2 colour printing. I only had close colours in PLA (Gold Silk and Prusa Azure Blue) When my PETG arrives, I will reprint! The model is derived from my design for CNC machined grip panels, which are commercial.
Переробив карту під свої потреби. Я друкував карту в масштабі 125% (на фото саме вона) то і кришку боксу треба брати відповідну з назвою Box top for 125% MAP! Бокс перероблений під 2 акб 181650 маленьку платку ДБЖ на 5В та дисплей з…
Included the solid and 2-color version with 1 filament change built-in. Print your favorite.
This Logo is made by Natasha Alimova, i only transformed that to an STL https://euromaidanpress.com/2014/03/02/russian-designer-creates-icon-for-peace-in-ukraine-using-the-shapes-of-the-national-symbolic/ I Added the STL and a gcode for…
Electronics, circuits, firmware https://github.com/J-A-A-M/ukraine_alarm_map
Original Author Ukraine Heart is Greenmagenta .
Made this for my friends. Print with two colors PETG with changing filament after 1.64mm.
Saint Javelin of Bohorodychne Church of the Holy Mother of God (‘Joy of All Who Sorrow’), destroyed by a Russian aerial bomb last spring, on January 18, 2023 in Bohorodychne, Ukraine.
Map of Ukraine with regions, original model by @tsbrownie_540636 had glitches at my slicer and no pure stl were available, so I've taken svg from creator's files and made it 3mm height, I've printed with 0.4 nozzle, 0.2mm layer height, 2…
I designed sunflower in Ukrainian colors to give it out to express support with Ukraine. The two pieces click together with moderate preassure. Just add a safety pin and secure it by moving the slide to locking position.
LEGO Ukraine defense industry 4x4 armoured vehicle HORT
We organized the production of Israeli bandages: from design, plastic parts to sewing and packaging. Since the beginning of hostilities on the territory of Ukraine, we have re-equipped our production for the production of parts for the…
For the prints in the photo I scaled the z-axis down, because I want to have a couple of them for the peace demo in Berlin.
A keychain single extruder version of UA tryzub, 3mf contains colorchange.
Вага при 20% заповненні 49 гр. Друкується без підтримок
Shown here in Prusament Azure Blue with Eryone Silk Gold detailing. Outlined in Inkscape, extruded in OpenSCAD, finished in Sketchup and sliced in PrusaSlicer.
UA Coat of arms, larger version, check dimmension pictures for exact dimmension of file, on the emblem is used small filet to enhance plastic effect. Scaling in slicer should work well also. Color change happening in 6,20 height, included…
Trying to make custom hatband for my Aussie hat. That's next cell for the chain. Proud to see Ukrainian Trident with sword. I'm still working of this. Keep watching!
Just a basic cookie cutter to support Ukraine. Use the large one for actual cookies, small for play-dough.
This print is a 2-piece Ukraine shaped flag, that should be printed in blue and yellow, and afterwards glued together. Using 2-sided tape, you can attach a magnet, and turn it into a fridge magnet.
Just the coat of arms. Please print and give for free to the brave Ukrainians!
We are releasing this design for free on the first anniversary of Russia’s invasion of Ukraine (February 24, 2023). In the past year, this magnet has raised over $500 in support of kids in Ukraine affected by the war through UNICEF.…
A simple ring I designed to promote awareness of the current needless war. As someone who migrated from Ukraine as a child I definitely feel a big connection to that country. But I also have Russian relatives and cannot understand why…
This emblem is can be mounted on a metallic surface as a magnet or just placed on a table using the printable stand. Printing instructions : Material used: PLA (Royal Blue and “Oh my gold” gold Prusament filaments) Layer Height: 0.2mm…
'Saint Javelin' Сент-Джавелін is depicting a Virgin Mary holding a Javelin, an American-made portable anti-tank missile system. It has become an icon of Ukrainian resistance to the invasion by it's northern neighbour Russia. The image is…
Ukraine trident to make KeyChains
ukraine sea drone magura
This 3D tea light model has been designed to create awareness for the war in Ukraine. Do not let the light go out for Ukraine. Please share a photo of your printed version in this thread to show each other the support for Ukraine. You are…
Print with yellow bottom and blue top (as Ukrainian flag) or paint it later There is a solid model too and an additional bottom models as a stand (no supports needed then) Looks nice with a small led inside --- Made in Blender 3D Printed…
I could never figure out what the maps were indicating when i was little. So i made one that i would have been delighted with as a kid. As you print, if you don't have an automatic color changing system, I have implemented a few stops,…
Saint RAAMon of Vuhledar Slava Ukrani. Yea. Its Saint Francis…more than likely he would not approve. Fully aware of the suspension of decorum and magnification of cognitive dissonance.
Show your support for Ukraine by printing out this Ukraine ribbon! If you have any suggestions for improvement, let me know! Happy Printing, - Ty10y
cookiecutter in the shape of Ukraine with the slogan "Make Cookies not War". Send a tasty message for peace in Ukraine! Works with PLA and PETG, watch out for FDA conform filament 205-215°C
Saint Mark9 of Bakhmut. Slava Ukraini. Fully aware of the suspension of decorum and magnification of cognitive dissonance.
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Ukraine Trident for make earrings
This key chain features the famous Ukrainian salute "Слава Україні" over a map of the country. The different colors are at distinct layer heights, so you can add filament changes in your slicer to have a nice look without a fancy…
3D model Church of Elijah the Prophet Ukraine, Subotov. https://goo.gl/maps/dAr9hs6zrUtxuqFr8 The church in the village of Subotov, Chigirinsky district, Cherkasy region was built in 1653 (according to other sources - in 1656) by order of…
Round about 30x20x7.5mm with a width of about 2mm Change the color at 10mm Also check out my remix where I created a keychain out of it.
Saint Bayraktar of Buzova village Russian T-72 Tank Destroyed in the Battle of Kiev April 2022. The T-72 seen here with the Ubiquitous Jack-In-The-Box Turret.
We recommend using a lower speed for the first layer.
The Simplest Flags 🇮🇩 🇺🇦 🇵🇱 If you are obsessed with flags, have international friends, or simply don't know what to do with your color filaments, this Flag Coaster collection is for you! Here is the simplest flag layout that allows you…
This is a miniature 3D-printable model of the Mother Ukraine (Батьківщина-Мати) monument of Kyiv. There is a storage compartment in the base, which the statue closes with a locking interface. The total height of the model is about 430 mm…
Každá vlajka má tolik *.stl, kolik má barev. Je potřeba každou barvu tisknou zvlášť a pak dodatečně slepit lepidlem a pak přilepit brožový můstek, nebo spínací špendlík na zadní stranu. Brožový můstek koupíte třeba zde:…
Hearth to support Ukraine in their strugge against any agresions. Weare it on your bags. We spread it ammong all of our friends. Please print double colour first yellow then blue. Size of 80% is quite ok. (please do not change the design…
Strengthened version SHR3D.eu's peace pendant. I printed the original made by SHR3D.ed however the small connection from the lanyard hole to the pendant broke so I beefed it up a bit. Everything else about the pendant is the same and…
A flag holder I made to show solidarity with Ukraine. These parts were made for a small diameter piece of conduit pipe, the outside diameter being 18 mm. The parts can be easily sized up or down for whatever size flag pole you have. The…
Hollow Maps of European Countries Made with tracing the inside onto paper in mind. Size: (over 100mm wide) X 1mm thick. Can be resized in you slicer. Layers: 0.2mm or less. Countries so far: UNITED KINGDOM, UKRAINE, CZECH REPUBLIC,…
Just insert the “Courage and Freedom” holding part in to the rooster base, it's a snap fit. The soda/beer can should be put in from top, remove from bottom. STOP INVASION! Here is the story of this pottery rooster:…
A simple pendant stylized in the form of the Ukrainian flag overlaid with a peace symbol, with which you can make clear your support for Ukraine in its difficult situation. The pendant is designed to be printed in colour in layers…
Saint Mavic of Ivanivka Flying Horse holding a Anti-Tank Mk-3 atop the Cultural Center of Ivanivka. This Public space was destroyed by Russia in the Spring of 2022.
UPDATE : check the updated version with a color change - no need for glue anymore :) This is the shape of Ukraine, to make badges and display support to Ukrainian people during protests against the war. Made in two parts : the base in…
I stand with Ukraine fridge magnet. Two colour: blue and yellow. With holes for two 12x2 magnets. Magents can be bought from AliExpress: https://www.aliexpress.com/item/1005002849121641.html
Pin to show your support for Ukraine and it's people. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.12 Infill: 15% Filament: Prusament PLA Yellow and Blue Notes: Start with yellow and then…
Print Settings Material: Gembird - Blue Pla Plus / EkoMB - Honey Gold Nozzle: 0.4mm Layerheight: 0.2 Color Changer - Z layer height Blue: 0.00-5.00 Yellow: 5.00-6.00
A Ukraine map vase that gets slightly narrow in the middle but expands at the bottom and at the top. PRINT IN VASE MODE! The model is a flat surface and layer changes will surely leave holes that'll leak water. Mine didn't turn out…
Single-nozzle multicolor badge in the shape of Ukraine, for pins 0.5×35 mm. Made to show support for Ukraine and its people during war with Russia. This part is printable with only one extruder without MMU and G-CODE contains 3 colors of…
Designed to be printed with a gap to insert 2 magnets (25x10x3 mm) and to be printed with different filaments to get the contrast relief instructions After slicing (without supports), manually modify the .gcode file to insert the pause…
Same thing but thinner thank you https://www.prusaprinters.org/social/43405-karolina-klempirova for original design
Famous t-72 Jack in the Box Turret issues. Slava Ukraine. (need to thicken turret and hole for earring. + probably best printed in an sla unit at moment. Ornament size would be printable in all formats. Id say resize to 50mm wide.
Help Ukraine by printing the token and giving it to everybody in your area! The QR code leads to braveryletter.com where the game is explained. It's basically a chain letter, but it can actually help somebody! The rules are simple: 1.…
This model was created to show that we are not broken, it's hard for us, but together we can do anything!
Second version of my Ukraine 🇺🇦 support badge. This time, no glue required (except for the pin in the back), only one piece to print. It also takes less time and less filament to print. Start printing in blue, and change the color…
Simple patch stylized in the form of the flag of Ukraine. The patch is designed for colour printing in layers (ideally 0.2mm) using manual filament change (e.g. using M600 command). The individual colours are printed in sequence: 0.0 -…
Video: https://imgur.com/gallery/q4sEIOc Bulb Socket: https://www.amazon.com/dp/B00WZUAO6I?psc=1&ref=ppx_yo2_dt_b_product_details Flame Bulbs: https://www.amazon.com/dp/B081H158NM?psc=1&ref=ppx_yo2_dt_b_product_details Wrapped bulb in wax…
Simple two-color model glued together
A quick remix of SHR3D.eu's Ukraine pendant. I wanted a two-sided pendant, so tinkered the original SCAD model so as to be able to print it at 50% thickness and glue two items back to back. Automatic color selection made by PrusaSlicer is…
I found the 25 mm length x 15 mm width best adapted. Printed in blue and yellow PLA without MMU. Used to fix a brokken zipper. A nice way to show support to Ukraine ! Imprimé en PLA bleu et jaune sans MMU, aux dimensions 25 x 15 mm pour…
I designed 2 colored Christmas ball that is threaded together with a perfect match of the part of the Ukrainian ornaments. Can be printed without infill.
A simple post stylized in the form of the flag of Ukraine. The pendant is designed to be printed in colour in layers (ideally 0.2mm) using a manual filament change (e.g. using the M600 command). The individual colours are printed in…
This is the non-magnet version of https://than.gs/m/895450 which is a Ukraine Trident. The model prints easily, use a brim when printing the shaft as it should be printed on its flat bottom without supports. 🖨 Printing Tips No supports…
Does not require support layer height 0.2mm just change the plastic to print text
✈ Join the DrukArmy – Support Ukraine with Your 3D Printer! 🇺🇦 We’ve modified this Flying WWI German Triplane Kit Card to not only be a fun print but also a symbol of freedom and resilience. While you enjoy printing and assembling this…