Keychain Collection V25 20 different Keychains! Follow Please!
Keychain Collection V25 20 different Keychains! Follow Please! My New Group: https://www.printables.com/de/group/3d-printer-group-for-epic-figures-eQ3qerR
- Downloads
- 219
- Likes
- 75
- Rating
- 0
48 models
Keychain Collection V25 20 different Keychains! Follow Please! My New Group: https://www.printables.com/de/group/3d-printer-group-for-epic-figures-eQ3qerR
Just a push fit attachment to give you a narrow aperture on the Sharks odd shaped handheld vacuum range, for getting into smaller area. Also included a particularly long one you can slice down to the size you want. No supports required.
This is based on / beruht auf: Bibliothek für Evolventen-Zahnräder, Schnecken und Zahnstangen Autor : Dr Jörg Janssen Stand : 29. Oktober 2018 Version : 2.3 Lizenz : Creative Commons - Attribution, Non Commercial, Share Alike Thingiverse:…
Camera Mount for DJI O4 Pro Camera, fits a ZMR250 frame.
Stirnzahnräder, Hohlräder, Planetensatz: - Zahnformen können beeinflusst werden: Kappen, Einzug, Kontur (nur Hohlrad), Schrägverzahnung - Planeten erhalten Markierungen für die Einbaupositionen - Zähnezahlen werden eingeprägt (bei 0,25 mm…
This is based on / beruht auf: Bibliothek für Evolventen-Zahnräder, Schnecken und Zahnstangen Autor : Dr Jörg Janssen Stand : 29. Oktober 2018 Version : 2.3 Lizenz : Creative Commons - Attribution, Non Commercial, Share Alike Thingiverse:…
QAV250 GoPro Mount Category: Hobby
See pictures, VTX antenna go up, RX antenna out the back.
Planetengetriebe für fischertechnik. Die Trägerscheibe nimmt 3 Planeten auf. Diese sind in je einem Drehteller gelagert, so dass der Abstand zur Sonne variabel ist. Die Planeten haben modul 1. Zur Verwendung mit der Hohlwelle 10 mm,…
Die Gesamthöhe wird auf ein konfigurierbares Raster ausgerichtet. Der Antrieb (Achse, Kupplung) wird als children() übergeben. OpenSCAD toolset for bevel gears and differentials. Total hight is adjusted to meet a configured raster. Center…
OpenSCAD: Zubehör und Adapter auf fischertechnik (ft) Zum Aufbau von neuen Teilen oder Grundkörpern: - Nuten liegend und stehend, flach und als Vollrund - Federleisten - Rastachsaufnahmen - Hohlwelle: Antriebswelle für ft-kompatible…
Small flower like tealight holder
Charge your phone with style Bill of Materials charger https://www.amazon.de/-/en/dp/B0DQ17DBQZ keyboard https://www.amazon.de/Bluetooth-Keyboard-Touchpad-Wireless-Backlight/dp/B0CDW61YPK/ref=rvi_d_sccl_2/258-8406037-9970563 The keyboard…
These big UV25 Baofengs are heavy - especially top heavy. If you have one you know they don't stay in the upright long resting on a desk. Two variations: One with a riser for desktop the other with no riser for throwing in a bag. I put…
A Holder for the Antenna witch can be secured by shrink tubing. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: Doesn't Matter Supports: Yes Category: R/C Vehicles
Verbindungen, Adapter: Statikteile mit S-Riegel verbinden ft-Nuten und Federleisten einbauen ft-Rastachsen verwenden Erweiterungen des ft-Systems: Hohlwelle (hollow shaft) 10 mm mit Durchgang für ft-Achse 4 mm) einbauen, adaptieren…
OpenSCAD-Skript (parametrisiert) für: generische Teile: Schrauben, Gewinde, Bajonettverschluss gerade + rund fischertechnik: Nabe für Hohlwelle 10 mm Die dargestellte ft-Drehscheibe ist nur ein Dummy. Benötigt weitere Dateien aus der…
Grundbausteine, parametrisiert, für OpenSCAD. Version 25, ersetzt v18 und v19 Rohr (tube) mit Fasen (ein/auswärts), Anschrägung (Konus), Sektor, uvm. Box mit Fasen (alle Außenwände) Stern (Objekte im Kreisbogen) Reihe (Objekte entlang…
This is a mash-up of an XT60 plug that can be glued in the top deck of a QAV250 frame. It has a ridge at the bottom that can be glued to the underside to ensure a strong fit. Done in TinkerCAD More cool stuff @ http://www.plastibots.com…
It´s a holder for the FrSky X4R-SB, between the two back pillars of a QAV250 / ZMR250 Quadcopter Frame. Category: R/C Vehicles
print it in abs , you will need 4 M3 screws and 4 nuts you need to flex the part to put the gps in and then screw it in the frame
So I designed a tray with 30.5x30.5mm holes to mount stuff in my old QAV250 frame, I was to busy to put larger threaded screws, so I made tthis tray for my VTX in this case. --The rod version has 4 rods in place of the holes as seen in…
A 9mm spacer for the PDB that replaces the 4x 10mm aluminum spacers. Light, offers a bit more protection for the PDB/ESCs. Inspired by the QAV250 spacer sold by FPV-FreeFlight but clean-room re-implemented from scratch as an Open Source…
This is the lastest version of the Open Z 1:28 3d printed RC chassis (april 2020). The thing contains the part list and a few diagrams, here you can find the pics for the build:…
This is an keyboard hanger you can use for Exibel S-KV256SB. There are 2 holes for screws
This predates me learning FreeCAD and thus lacks source files. To make edits you can visit: https://tinkercad.com/thing Requires: - 4x M3 16mm screws - 4x M3 lock nuts
I made this supports for 3 kinds of led. A 12 led cluster from HobbyKing, 12V, (ref 12LED-RE / 12LED-BL / 12LED-GR / 12LED-WH) to be positionned at the back or in the front. A 3 led with buzzer for Naze32, 5V, (Ref 090000013-0) to be…
A VTx holder for the QAV250 frame Category: R/C Vehicles
QAV250 LED-Strip side panel for 12mm RGB LEDs 30,5mm - for mounting underneath the Flightcontroller. Category: R/C Vehicles
Print with TPU than insert the R9 mini into the hole.
I designed this model after losing or breaking the original cap (specify where the cap is located, e.g., "on the wheel hub" or "on the interior dash"). This is Version 4 of the design, which has been refined for a snug, secure fit and…
I wanted a straight down mount for my quadcopter Mobius camera. This one works well. Instructions I printed this with 95% infill in PLA with support generation turned on and the front part down on the bed. It came out nice and sturdy, but…
I saw J0bro's design, but it didn't fit my frame, so I designed a new one which fit my dimensions. I also didn't feel like ordering the vibration dampeners so I designed those as well and printed them in NinjaFlex which seems to have…
Detailed 3D printable Full Body V25 figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license: https://www.patreon.com/Marjers…
print it in abs you will need 4 M3*4 nuts and 4 screws print the antenna mount in to pieces
deflects purge ejected from the bambu lab a1 printer does not need a non stick tape to wrap around it. just hold tape/material in place, then snap the spring part onto the frame sandwiching the non stick material between the frame and…
This adapter kit is designed specifically for the Black and Decker Bv25 blower. It includes two adapters: 12cm Round Pipe Adapter: Easily attach a standard 12cm diameter round pipe to your blower for tasks such as clearing gutters of…
This is the lastest version of the Open Z 1:28 3d printed RC chassis (april 2020). The thing contains the part list and a few diagrams, here you can find the pics for the build:…
This is based on / beruht auf: Bibliothek für Evolventen-Zahnräder, Schnecken und Zahnstangen Autor : Dr Jörg Janssen Stand : 29. Oktober 2018 Version : 2.3 Lizenz : Creative Commons - Attribution, Non Commercial, Share Alike Thingiverse:…
This is based on / beruht auf: Bibliothek für Evolventen-Zahnräder, Schnecken und Zahnstangen Autor : Dr Jörg Janssen Stand : 29. Oktober 2018 Version : 2.3 Lizenz : Creative Commons - Attribution, Non Commercial, Share Alike Thingiverse:…
Verbindungen, Adapter: Statikteile mit S-Riegel verbinden ft-Nuten und Federleisten einbauen ft-Rastachsen verwenden Erweiterungen des ft-Systems: Hohlwelle (hollow shaft) 10 mm mit Durchgang für ft-Achse 4 mm) einbauen, adaptieren…
OpenSCAD: Zubehör und Adapter auf fischertechnik (ft) Zum Aufbau von neuen Teilen oder Grundkörpern: - Nuten liegend und stehend, flach und als Vollrund - Federleisten - Rastachsaufnahmen - Hohlwelle: Antriebswelle für ft-kompatible…
OpenSCAD-Skript (parametrisiert) für: generische Teile: Schrauben, Gewinde, Bajonettverschluss gerade + rund fischertechnik: Nabe für Hohlwelle 10 mm Die dargestellte ft-Drehscheibe ist nur ein Dummy. Benötigt weitere Dateien aus der…
Grundbausteine, parametrisiert, für OpenSCAD. Version 25, ersetzt v18 und v19 Rohr (tube) mit Fasen (ein/auswärts), Anschrägung (Konus), Sektor, uvm. Box mit Fasen (alle Außenwände) Stern (Objekte im Kreisbogen) Reihe (Objekte entlang…
Die Gesamthöhe wird auf ein konfigurierbares Raster ausgerichtet. Der Antrieb (Achse, Kupplung) wird als children() übergeben. OpenSCAD toolset for bevel gears and differentials. Total hight is adjusted to meet a configured raster. Center…
Stirnzahnräder, Hohlräder, Planetensatz: - Zahnformen können beeinflusst werden: Kappen, Einzug, Kontur (nur Hohlrad), Schrägverzahnung - Planeten erhalten Markierungen für die Einbaupositionen - Zähnezahlen werden eingeprägt (bei 0,25 mm…
Planetengetriebe für fischertechnik. Die Trägerscheibe nimmt 3 Planeten auf. Diese sind in je einem Drehteller gelagert, so dass der Abstand zur Sonne variabel ist. Die Planeten haben modul 1. Zur Verwendung mit der Hohlwelle 10 mm,…