HP VICTUS cable organizer
HP VICTUS Şarj ünitesi kablolarının dağınıklığını engellemek için tasarlandı.
- Downloads
- 268
- Likes
- 30
- Rating
- 2
Counting matching models…
HP VICTUS Şarj ünitesi kablolarının dağınıklığını engellemek için tasarlandı.
This is a very simple stand for a Victus 16 laptop to increase its intake's airflow and reduce dust accumulation. The original stand dimensions are 20mm x 150mm x 15mm. That is the one shown in the pictures. I have attached the STL files…
The Trivictus PCAR spirals in the DartZone SCAR dummy model. 4 walls 100% infill
Wanted to slow down the FPS for use in a low-speed game. Tested different lengths to see how it affected speed. With Adventure Force and Dart Zone short darts, the 60mm and 100 mm resulted in about a 10 FPS drop. The other length of SCAR…
Vertical stand for HP Victus 15 notebook to ensure better ventilation and cooling. Material: PLA or PETG Number of walls: 2 Layer height: 0.2mm Filling density: 15 Filling pattern: Grid
This thing will take a lot of filament, a couple rolls at least. I tried to size it to Clive in-game. So while this is a lot smaller than a Buster sword, it's firmly in Big Sword territory. Printing 5 of Invictus Blade Insert 2-6 2 of…
Just a skinnier Trivictus SCAR.
The Invictus Classification: Ancient Imperial Altair-Class Battleship, later referred to as a "planet destroyer-level" ship. Design: Characterized by its massive concentric ring structure, which is integral to its function. The design is…
These are some remixes I made for the Trivictus EasiestSCAR. https://www.thingiverse.com/thing:4967719 1: I made a Hexagonal version of the SCAR 2: For each SCAR variant, I made a version that uses a tightening plate and 2 4-40 screws…
Remix of Silly's Trivictus Scar. His are designed to shoot rocket darts off the tip, but, alas, I have none. (There's just no modern way to fix that unfortunately.) And so, I have remixed his utilitarian model into ones that give your…
I designed this Trivictus Whispercar cosmetic mod based on the real-steel Strike Industries OPRESSOR blast shield/linear compensator. I printed it on my Bambu Lab P1S in BL black PLA Tough+, with a layer height of 0.2mm.
Took the heavily ported quadvictus RIPPCAR out of the other design and made it standalone. Print nose down.
I designed it so there is room underneath for a din a4 sheet of paper or some other stuff you have laying around. By setting top and bottom layer to zero you can create this effect of seeing the infill like in the pictures. mit lüfter…
Remix of Silly's Trivictus Scar. His are designed to shoot rocket darts off the tip, but, alas, I have none. (There's just no modern way to fix that unfortunately.) And so, I have remixed his utilitarian model into ones that give your…
Remix of the Trivictus SCAR by Thanhtacles that can be friction fit onto the end of a Dart Zone dictator and roughly maintains the aesthetic of the original barrel lug. Looks good enough, prints and attaches without hassle, and makes your…
I made a wall mount for HP Victus 15. Each mount has two screw holes for fixation to the wall.
these legs are made to improuve the air flow under your hp victus laptop
Attachable on Aeon or Nexus pro, has port venting
Remix of Silly's Trivictus Scar. Is it subtle? No. Is it streamlined? Not really. Does it look like it go ka-boom? Yes. I printed this with the Non-threaded end on the heat bed. Recommended 5 walls, 25% Infill, Gyroid. (You can probably…
Cable management accessory for the 230W HP Victus power adapter.
A shortened Trivictus EasiestSCAR! I only shortened the area that clasps around the barrel to allow for more clearance for shorter barrels against the body of a blaster. The “shorteneder easiest scar cylinder” is the shortest of the 2…
I was struggling to get good accuracy from my Protean, and after success with the StryfeX barrel lug with pcar and a tight bore barrel after it, I replicated that setup for my Protean This uses the 14.0 T barrel as its base, and lengthens…
"the enderchicken" once asked: "what about a bcar with bearings arrange like a rippcar" And so here it is. Quadvictus was used as the base because I never got good results from the trivictus variant, and you get a choice of triple o ring…
Overview This is a precise 1:1 scale replica of the HP Victus laptop logo. It was modeled based on the original dimensions to ensure an accurate fit for any enthusiast projects, laptop customization, or replacements. Design Notes…
Roomba Filter CLEANER for Invictus X7 I was looking for a way to clean the Hepa filter on my Roomba iRobot and came across this adapter. https://www.thingiverse.com/thing:4733753 I remixed it to match the connector of the Invictus X7 ;)…
Support on build plate only. Make sure it doesn't interfere with the collet threads. Uses Sillybutts' collet design, designed for Thanh's EasiestScar .
Dual SSD/2.5" drive for HP Invictus 15L Height of original was too hight to fit in the drive cage so I recreated it in F360 There are 2 versions. I have a cut-out for a bump in the base of the cage, the other does not. I printed and use…
Adapter that fits an Invictus X5 and a 16mm OD rubber tube (both are friction fits). Nice for getting into tight corners - I use it to occasianlly clean up around my desktop CNC.
Sorry to keep you waiting! The HP Victus Stand is now ready with an all-new middle support for maximum stability. This design aims to prevent overheating issues while maintaining a portable, travel-friendly form factor. Key Technical…
Remixed from WhiskerPCAR v2.0 RIPPCAR Trivictus model by Thantacles Shaped and resized to friction fit to 19mm barrel lugs such as on Dart Zone and Adventure Force Pro blasters (e.g. Nexus Pro, Stryker, Dictator, etc), has a cool…
HP VICTUS 16 wall stand for more space on table. The laptop fits perfectly into the form, there is no chance of it falling off. This is my first version, let me know if the tolerances are okay for your printer. Material : ASA / ABS…
After purchased some HP Victus gaming desktops from Costco (a cheap/quick way to get computers with good GPUs during supply chain problems) we decided that all the glowing V things looked stupid in the data-center, especially since all…
The button that holds the nozzle and canister together. If you lost the spring, this is the size: 6mm x 15mm spring
Sliding Camera Cover for Hp Victus 15"
This is a simple remix made to fit inside of a replacement shroud I was making for the ZWQ S100S Bai Ze. Given how many BCARs of quality we have these days, this is probably of limited utility.. :)
Cable management accessory for the 230W HP Victus power adapter.
Took the heavily ported quadvictus RIPPCAR out of the other design and made it standalone. Print nose down.
"the enderchicken" once asked: "what about a bcar with bearings arrange like a rippcar" And so here it is. Quadvictus was used as the base because I never got good results from the trivictus variant, and you get a choice of triple o ring…
Sorry to keep you waiting! The HP Victus Stand is now ready with an all-new middle support for maximum stability. This design aims to prevent overheating issues while maintaining a portable, travel-friendly form factor. Key Technical…
A 3d-printable model of the ESA's Invictus experimental hypersonic plane concept derived from reaction engines SABRE engines This includes a small scale desk model with and without a stand as well as a model designed for rc scale I made…