Wile E. Coyote and the Road Runner
Wile E. Coyote and the Road Runner
- Downloads
- 932
- Likes
- 156
- Rating
- 0
46 models
Wile E. Coyote and the Road Runner
Wile E. Coyote, a cartoon character in the Looney Tunes and Merrie Melodies series of short films produced by Warner Bros. He is a cunning, devious and constantly hungry coyote repeatedly attempting to catch the Road Runner. Instead of…
A splattered Wile-E Coyote
Wile-E Coyote Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the tab…
A nice mini version of my splattered Wiley Coyote refrigerator magnet uses a 5x2 or 6x2mm magnet (there are two versions). Super quick and easy to print requires no supports and minimal infill. Press a mini magnet into the recess (may…
Wile E Coyote holding an umbrella Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
I left the sign empty, so that you could put a small paper or 3d print of your own in back or in the print. Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your…
Wile E Coyote Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the tab…
Remix Wile E. Coyote. I have combined the parts into 3MF files separated by color for easy printing
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Wile E. Coyote and Road Runner Wall Art
A Twilek miniature suitable for tabletop. Print instructions Category: Creatures
WARNING - updated d.d. Oct 18, 2023 The electronics circuit and description have been corrected after I discovered the first version was horribly wrong. My sincere apologies for any failures, if you tried it out yet. Introduction This is…
Wile E Coyote - Bugs Bunny easy to print in one color very quick and looks great
A nice splattered Wiley Coyote refrigerator magnet (uses two 10 x 3mm magnets). Quick and easy to print requires no supports and minimal infill. Press a couple of 10 x 3mm magnets into the recesses (may need glue) and he's ready for…
This nozzle can be used with the Novritsch Anti-Fog unit (using 9mm tubing) and Wiley X glasses using comm temples. Comm temples can be recognized by their thin layout, suitable for use with over ear headset. The nozzle inlet is oriented…
This is model is designed to be printed with a Bambu Lab AMS or similar. I recommend printing with a .2mm nozzle at .14mm layer height. There is a second version included without text on the sign. Text can be added using your slicer. The…
This is model is designed to be printed with a Bambu Lab AMS or similar. I recommend printing with a .2mm nozzle at .14mm layer height. The best sheet magnets I have found to use with this model is Marietta Magnetics brand 30mil (with…
More Star Wars model in my profile, check them out!
Used a common 12v DC motor, 12x75mm. Was able to get around 4 volts, and power a white LED with around 100 mA current. Spur A is for generator shaft, Spur B is for motor shaft. Spur diameters and Spur A hole size are parametrized in…
Printed in TPU for a less noisy ride. 4mm thickness. Mirror 1 print for the rear tires in your slicing tool. Should fit many Wilesco model steam engines, rescale for other models.
Qidi 4 plus tool head with Wiley Coyote air holes on front. Print petg, abs, face down, 50% infill Please leave a “Like”, Thank you
Since my old wireless transmitter had to be replaced with a newer one i found really uncofortable to attach it directly to my bass guitar. So i designed an attacment to use a simmple jack extension to fix the transmitter to the guitar…
Start with grout color, then red brick, then brown for coyote.
Inspired by the Cartoon of Road Runner and Wile E. Coyote and his strapping Rockets to his stuff. Print will require some finagling …. but a helper for the Coyote can do it! love to see your prints.. mine is in progress (heheh) .. if it…
15mm base with a hole for a 5x2mm round magnet. designed to print well on an FDM printer without supports. .2mm nozzle recommended
This 3D printable model is a replacement condensed water tray designed for the Wilesco D16 steam engine model. It is intended to replace a worn-out or damaged tray in your existing steam engine setup.
Verschiedene Ventilräder für die Dampfmaschinen Wilesco D16 bis D32. Ersetzt das original Rad. Am besten mit ABS bzw. ASA drucken. Support wird nicht benötigt. Print Settings Printer: Anycubic i3 Mega S, Anycubic Mega X Rafts: No…
This is my Wile E Coyote slammed into the side of the MasterLiquid Atmos EVO Badge. I printed him using three PLA colors, .2 layer height, and normal supports for the bottom. I started with red. At layer 56 I changed to yellow. Then at…
Wile E Coyote - Bugs Bunny Coaster dont need supports can change the size or colors print in colors
Wile E Coyote - Bugs Bunny Coaster Easy to print in two colors dont need supports you can change the size or color if you want
A TPU gasket for helping seal the Wiley-X SG-1 glasses against chemical agents such as teargas or pepperspray. The SG1 glasses/goggles are great for ballistic protection for protestors/observers, and are one of the only ballistic glasses…
This is a simple holder for the Transmission of the Wilesco M56 "Modellplatte" . Drill out the hole with a 4.2mm drill, if needed, depending on the print quality. Also, a drop of oil won't hurt. Category: DIY
easy to print in two colors without supports you can change the size before print hope you like, download and comment Your support is very important Thank You
WileyX insert lenses protector. I pack the lenses in the microfiber cloth to avoid rattling. Will fit the WileyX pouch with two replacement lenses and the glasses themselves. The STL file is without the big "Hertz" on the front. I printed…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150x150mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 1.84mm and the Actual…
Ever had a Teams or zoom call where your audio is glitching? Now you can be sure by printing out this sign and holding it up to the camera to communicate with your audience, just like Wile E. Coyote out of Road Runner. In theory you might…
Print information: Perimeters: 5 Layer: 0.1 Supports: build plates only.
This 3D model of the Sigriswiler Rothorn peak was created as part of a school project (Vertiefungsarbeit) focusing on modern surveying techniques. Our detailed process involved: Data Acquisition: Hiking to the summit to capture the…
Qidi 4 plus tool head with Wiley Coyote air holes on front. Print petg, abs, face down, 50% infill Please leave a “Like”, Thank you
Susie wiles as coyote-the coloured image is only a reference image for painting the 3d model
A TPU gasket for helping seal the Wiley-X SG-1 glasses against chemical agents such as teargas or pepperspray. The SG1 glasses/goggles are great for ballistic protection for protestors/observers, and are one of the only ballistic glasses…
💥 Bring Looney Tunes nostalgia to your 3D printer! 🎨 This detailed Wile E. Coyote and ACME Anvil model is split into separate parts for easy multi-color printing on any FDM printer—no AMS or MMU needed! ✨ Key Features: 🧩 Multipart &…