Twitter Verified Bobbleheads ✓
Save the 8 bucks and print yours today! Sorry Elon!! - Double spring and extra wide bases included.
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for one variant
- Downloads
- 43
- Likes
- 33
- Rating
- 0
131 models
Save the 8 bucks and print yours today! Sorry Elon!! - Double spring and extra wide bases included.
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for one variant
Saw this silly thing on IG (https://www.instagram.com/reel/C2FxIc6pKIZ/) and decided to make one of my own just for the fun of it :) Prints with no support and uses 6mm magnets.
Wall mount for a Ecowitt WS90 weatherstation. To mount outside: Print in PETG Screws 4x40mm stainless steel
These speaker adapters were designed during my E46 convertible sound upgrade. My E46 is a Euro spec convertible without Hi-Fi nor HK options. This means: Sound amplification is done directly by the build-in radio (CD53 manufactured by…
Bottom is made for 3mm heatset inserts. I used four stick on rubber feet to stabilize the board since the gps module lives under there. A few dabs of hot glue will keep it in place. The holes for the screws on the antenna ring and the lid…
Print options Print with supports.
Made this remix so we can mount the WS90 by routing the cable through the mount.
Holder WH57, WH32 for pipe diameter 60mm printed from ASA275 layer 0.2 without supports adhesive for bonding plastic, I used Loctite 406 screew 4x M3x10 innox 2x UV stable binding strip 280x4,5 mm print 1x part A, 7x part B(B+), 1x part…
Nozzle: 0,4 Supports: NO PLA, PETG
Adapter to mount the GW2001 to a 1.5in pole. Allows the heater cable to be passed though. I've printed in white PLA with a spray UV coating.
Now you can have your own Twitter Blue verification checkmark without paying $8/month. Put it on your home office door, that way whenever you walk in, you will know you are verified.
Case with holder for Ecowitt GW1100 Wi-Fi gateway. The holder allows you to place the gate anywhere you want. Printing without supports, Infill: 15%. Share your printed model.
Ecowitt WH31 stand Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 15 Filament: unknown PLA Category: Household
I really enjoy content using florks (especially on r/noncredibledefence) and always found them cute and funny at the same time. I had an idea to give some of these out where people can decorate them on their desks or shelves. I did not…
A piece by Sol Lewitt that often appears in the background of CNN interviews where they use this guy. I guess he bought it. Found via reverse image search, gottta love the internet. For this look start with White then switch to BLACK.…
Twitter X Keycap printed with White and Black
Powered by Shelly Ecowitt WS90 - 7-in-1 weather station stand for flat surfaces
Print on side with supports (see attached project file for recommended print settings).
widdle wadder 8x2mm magnets
A stylish stand for an Ambient Weather WH31 temperature/humidity sensor. I think the thermometer is the same as the Ecowitt WH31. (I believe Ecowitt makes the Ambient Weather product.) Printed on a Prusa Mini+, 0.2mm layer height, 2…
An enclosure for a Witty ESP8266-based microcontroller. Hole for USB to power device, and hole for wires to exit on the opposite side. https://www.tindie.com/products/ICStation/esp8266-wifi-witty-cloud-development-board8154/…
「X」を回転させると、実は青い鳥が隠れています。@90度回転させると青い鳥と「X」が現れるモデルです。
EN: With this adapter, an Ecowitt WS90 weather station can be mounted on pipes or railings up to 45mm in diameter using a standard M8 pipe clamp. The adapter has a diameter of 25mm and a recess especially for the WS90 power connection…
This 3D model serves as a housing for a device that plays sounds when a person is present in room - see the following YouTube video for details:
This is the new Twitter logo after the name change to X 8g - 2.66m
Made from Tinkercad, Bobby Witt Jr is my favorite player
Tired of being a nobody? For just $8 (or a couple of grams of filament) you too can be important!
Just a simple TPU printed part to replace the broken original rubbery holder. Uses original hardware and stand mount.
The Twitter version of my Lucky Cat Cookie Cutter. (Farting sound not included) (If you know, you know) The original version can be found Here. Print from any food-safe material at 100%. Enjoy! You can find all of my unique cookie cutters…
Wittchen suitcase handle repair kit. You need extra: M3x25 screw - 2pcs M3 screw washer - 2pcs M3 nut - 2pcs
I made two versions, both can utilise colour changes at layers in order to have a tombstone colour, a lettering colour and a bird logo colour. I started printing mine before I finished the design because I was impatient. I'd suggest…
My Froggit weather station includes the Froggit DP80 rain gauge. It came with a 32mm, 200mm long, mounting pole and brackets to screw to the rain gauge. This design has a ball that fits around the pole and a joint type stand to screw to a…
Handle fits with original m4 screws
For all the people that have enough money for a 3D printer but agree that 8$ is too much.
The Twitter Logo as Cookiecutter I made this Model with https://app.cookiecad.com/
Bird spikes for the Ecowitt WH40 rain collector, which has a 182mm diameter. I didn't have metal wire at hand, so I used PETG and printed some spikes using the “cylinder primitive” in Orca / Prusa slicer. Onshape link
Adapted a birdhouse segmented pole (from a birdhouse mount kit) to use as stand for Ecowitt WS90 weather station sensor array. The adapter fits on end of one segment of the pole. The other end of the adapter is for the 1-inch pole mount…
[EN]: Radiation shield with 6cm inner diameter and 12 cm outer diameter. Harware-less assembly. Print from ASA/ABS upside down, then glue bowls together. Bowls and Cap without supports. The mount with tree supports. [CZ]: Radiační štít…
Birdhouse based off the work of Sol LeWitt. Instructions Print it out at high density. It shouldn't need anything special. Category: Outdoor & Garden
The only checkmark you need to make sure everyone knows you're who you say you are! • Label Pin: https://www.amazon.com/dp/B07X9YFVVB • Keychain: https://www.amazon.com/gp/product/B07DC9YZXV • Magnet:…
The bottom and fence bracket are connected with a dovetail and use a single M4x20 countersink screw to secure the bottom to the bracket. No nut is needed since it will make its own threads. This will make a solid connection. Print the…
Extended tube version of the WS90 wall mount. Didn't end up going with this design for my application, but I'd figure I'd upload it here anyways.
I made that plate to mount my Ecowitt WS2910 on top of a wooden structure. I printed it in PETG but ASA would maybe be even better. I used Spax 3.5 woodscreew to mount it.
Spike ring to avoid birds pooping in my rain gauge. This fits ecowitt's weather stations\rain gauge (about 11 cm dia.) I got the idea from @halfdink's thing, but designed it completely from scratch. Support me! If you want, you can…
Great little Musk/Twitter Sign just for giggles. Annoy the left, side with freedom with this Twitter sign. Print in Blue and White, stopping half way for a filament change. You may have to scale to fit your machine.
Simple holder WH57, WH32 for pipe diameter 60mm printed from ASA275 layer 0.2 without supports 2x UV stable binding strip 280x4,5 mm
desk or shelf art for your attorney friends or Twitter jail friends. Recommend .12 layer height on an Ender or .15 on a Prusa. I followed the originals recommendations.
1st Layer: 0,15 other Layers: 0,16 Perimeters: 2 Infill: 25% Grid Scaled down to 80% (in pictures) printing speed slowed down about 30%
Sensor stand - wh32 Ecowitt Bardzo Fajny stojak do czujnika pokojowego. A very nice stand for the sensor!
Get your own Twitter Blue checkmark at no cost! Twitter Blue Verified Checkmark Keychain. I included a 3mf that has a manual color chain exported from prusa slicer, use your favorite white pla filament and then switch to a blue one. If…
This is a cover for the Ecowitt GW3000 Gateway. The cover is designed to give the gateway a refined look when mounted to the wall or sitting on a flat surface. It does not interfere with the operation, ports, or airflow. It also contains…
Change color mid-print to get the dual colors.
print it on its foot ;-)
A simple New Twitter X logo scalable (size and thickness) for any use
Go Elon Musk! But Twitter is dead to me….
TL;DR The Mysterie Twitter Coin Twitter Today i read a story on twitter, about a guy who claimed to have “stolen” the logo(?) of “twitter coin” from an internal twitter developer database and watermarked it to protect “his” intellectual…
Designed for the W31, but other similar Ecowitt models should also fit. Made to attach behind the door handle in the Bambu P1P ARC enclosure, to position the sensor at the top of the chamber to monitor the active print area temperature.…
for Ecowitt WN32, TN31, WH57, WH32 sensors Pole diameter 34 mm (or wall mount) Printed from PETG layer 0.25 no supports Thermal shield used: https://s.click.aliexpress.com/e/_oCWC4dv (no affiliate links)
A Witty Pi3 version 1 component from UUGEAR for the Raspberry Pi in step format for use in your own designs.
A simple print for the Ecowitt 2910 console. This stand lifts the console up and positions the screen at 10º tilt, so it's viewable from more locations. The original stand tilts the console back too far. Print on its back. No supports…
This is a remix of my own sign posted weeks ago. I have scaled this to be more appropriate as a fridge magnet. I have also thickened the design and hollowed locations to insert up to (4)-2mm x 8mm magnets. You could also print without…
A small ornament for Christmas trees. Non Commercial , absolutely not for $8.
My cat is semi toilet trained he pees on the toilet without issue but refuse to poop when toilet doesn't have any litter at all. This model attaches to the green piece of Litter Kwitter as shown in the picture
Ein Adapter / eine Halterung, um eine Ecowitt Wittboy WS90 Wetterstation auf eine vorhandene SAT-Halterungsstange draufzusetzen. SAT-Stange hat einen Innendurchmesser von 49,8 mm (ohne Schutzkappe auf der Stange) auf Ecowitt 27 mm…
Wearable Twitter feed badge. My Code is on github. https://github.com/AmieDD/oled-twitter-display Using the Onion Omega2+ . Twitter IoT Name badge Hardware Ingredients Onion Omega2+ Onion OLED display Onion OLED expansion dock ###…
This is a magnetplate to screw on the mount. You need 4xM4 ~10mm Screws and 8x6x3 Magnets.
The original back panel of the sensor keeps breaking in the corner mounting points. And if it breaks, the sensor is no longer aligned with the reflector and the gate won't close. A “wide holes” (5mm) variant is included if whoever…
A wall mount for my Ecowitt WH43 which should be used indoor only. I decided to ignore it by creating a wall mount for this. The mount has holes for zip ties as well. Should be printed with a material which doesn't care about weather…
Description Custom 30 mm headset / stem spacer designed for the Twitter Gravel V3 gravel bike . This spacer follows the shape of the original headset area and is intended to provide a cleaner, more integrated appearance than using a stack…
With the Twitter verification fiasco I decided to make these. I incorporated magnets in mine to verify my refrigerator! I've added 2 .STL and both of the .F3D files so you can do what you want with them. One has the checkmark completely…
Ecowitt Gw1000, GW1100, GW1200 IOT Wi-Fi Gateway with Built-in Temperature/Humidity desk stand holder. USB cable end size: 18mm wide x 10mm high x 26mm long Several temporary supports in the cable opening that can be easily removed with a…
A simple twitter logo scalable (size and thickness) for any use
In the depths of my heart, I hold a cherished memory that intertwines with the essence of Twitter's iconic blue bird logo. It was a symbol of connection, of sharing joy and sorrow, and a reminder that in this vast digital world, we are…
Twitter Logo CherryMX keycap Category: Signs & Logos
Enclosure for the ESP8266-based Witty Cloud module. Hole for USB to power device, a hole on tha back to hang the box on a screw and holes for the light sensor and RGB LED. You might want to add the plastic opal lenses to make it neat.…
This print holds an Ecowitt LDS-01 on top of a rain barrel. I purchased rain barrels through rainbarrel.ca and wanted to mount my new Ecowitt LDS-01 laser distance sensor to be able to determine the amount of water in the barrel. These…
I use this to bring our weather station sensor down for cleaning as it is mounted 4m above the ground. Current design uses a survey level pole for the cradle, but it should be easily adaptable to other poles. Consists of: A mount to fit…
Version 1.0 of a Hapsichord jack and tongue for delrin quil replacement on my Wittmayer Hapsichord DBP 9219008. This project aims to offer a simple replacement by using delrin quills. Instead of stuffing the delrin ones into the old…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
A weather shelter for Ecowitt sensors. A housing designed for mounting the Ecowitt WN31A sensor outdoors. It provides ventilation and protection against rain, and reduces heat radiation from the wall. It should be printed using white…
Diese passgenaue Wandhalterung ermöglicht es, die Konsole der Wetterstationen Ecowitt HP2560 oder Froggit HP2000 sicher und platzsparend an der Wand zu montieren. Da das Originalgerät primär für das Aufstellen konzipiert ist, schließt…
I wanted to adapt my Ecowitt temperature and humidity sensor so that it can fit in the AMS for my BambuLab X1C. This 3 part enclosure refits the electronica for the Ecowitt WH31/WN31 Temperature and humidity sensor. Dimensions are…
Google+ ist dead but it could live in our hearts If you like to, check out my other designs too!
paires boucle d' oreille twitter
Skadis mount for Ecowitt HP2551. Fits into the holes in the back of the device. Attached mlrkey's skadis mount (https://www.thingiverse.com/thing:5257623) Print with supports
Description Custom aerodynamic tool box mount for the Twitter Gravel V3 seatpost . I designed this adapter specifically for the aerodynamic seatpost used on the Twitter Gravel V3 . The mount allows you to install the excellent “Seatpost…
Remix of the Twitter Verified Bobbleheads by Triple G Workshop, added a recessed surface of the tick to add colour in the Bambu Lab Studio, should also work with Prusa Slicer.
I still had the mounting hardware for my old weather station installed. The mounting pole outer diameter of the old one is around around 29.5mm ish. The inner diameter on this remixed version of the pole adapter is around 29.6 in the…