Search results: wr

Sort order

7,911 models

P
PrintablesA_R_B

Torque Wrench Handles from 1.0Nm up to 3.0Nm

Low torques are necessary for many applications, such as carbon parts on mountain bikes or screw connections on electronic and robotic devices. But the usual torque wrenches works reliably only at 4 or 5 Newton meters and above. Fixed…

Downloads
8,898
Likes
3,101
Rating
4.77
P
PrintablesMan-in-Black

ESP32 case for ESP-WROOM-32D

I made a remix to fit my ESP-WROOM-32D because the ESP won't fit with the original case. I also changed the fittings a little bit so that it can be easy reopened.

Downloads
1,951
Likes
140
Rating
5
P
PrintablesRaegin

Wrench for Logitech G27, G29, G920, G923 racing wheel

Description Tightening the nuts on your Logitech G27, G29, G920, or G923 steering wheel doesn’t have to feel like an arm-wrestling match with a gorilla. This wrench, based on the original design by magno23 (thanks for the initial work!),…

Downloads
1,652
Likes
239
Rating
5
P
PrintablesAlid

Lego Wreath - Halloween (updated spider web)

UPDATE: FIXED SPIDER WEB - 18 SEPT, 2025. I wanted some Halloween decorations for the Lego Wreath I have. I wanted a simple design fitting with the other decorations and Lego's simple design. I found these designs that is part of a game,…

Downloads
1,550
Likes
576
Rating
5
P
PrintablesNautilus Forge

IKEA SKADIS - Ratchet / Socket Wrench organizer + tools

⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…

Downloads
1,414
Likes
243
Rating
4.55
P
PrintablesDaniel

Kids Toy: Wrench (Spanner) and Bolt Box

This is a box I designed for my kids to have fun with and practice their wrenching skills so someday they can do it for real. I tried to design everything to be as realistic as possible. The bolts are designed to look realistic, but they…

Downloads
1,371
Likes
308
Rating
4.94
P
Printablesso meone

esp32-cam OV2640 focus adjustment wrench tool

Make sure the cam is mounted securely before using to the avoid risk of tearing the flatflex. Contrary to other designs the grabbing teeth have a tiny angle to them, they get thicker in the middle. This allows for slight off-center usage…

Downloads
717
Likes
49
Rating
4.89
P
PrintablesRaegin

Küpper and Skadis Proxxon Slimline combination wrench holder

Description Proxxon combination wrench holder including versions for both Küpper and Skadis Pegboards. In order to save space the wrenches are placed sideways. Each wrench size is displayed to the left of the wrench. Available models…

Downloads
659
Likes
273
Rating
0
P
PrintablesMehTechArt

Subaru Impreza WRX STi Sedan Wall-mounted

Please click ❤LIKE❤ if you appreciate my work 😊 AMS COLOR VERSION: makerworld.com/en/models/3168975-subaru-impreza-wrx-sti-sedan-wall-mounted Rally heritage meets minimalist wall art. This 3D printable model of the Subaru Impreza WRX STi…

Downloads
611
Likes
188
Rating
0
P
PrintablesKarel Pěnička

Flexible Wrist

Easily printable wrist. Image segmentation made in 3D slicer. Other 3D works in Grasshopper and MeshMixer Lehce tisknutelné zápěstí. Segmentace CT dat dělaná ve 3D sliceru. Ostatní 3D práce v Grashhoperu a MeshMixeru. Prusament PLA…

Downloads
606
Likes
148
Rating
4.93
P
PrintablesPeter Farell

Deadpool : Wrexham FC

Deadpool : Wrexham FC Should have given him some cleats. Feel free to accessorize and share.

Downloads
600
Likes
147
Rating
0
P
PrintablesFSL

Očko-klíčenka 10 mm / Wrench keychain 10 mm

Klíčenku lze připnout na klíče za očko na levé straně viz obrázek. S klíčenkou jdou povolovat a utahovat šestihranné 10mm šroubky a matičky, funkčnost je ale omezena materiálem, ze kterého je klíčenka vyrobena.

Downloads
391
Likes
27
Rating
5
P
PrintablesJPMakesStuff

Wrench mount compatible with Ryobi Link

Printable wrench mount that works with Ryobi link Requires Qty.3 M4 0.7 8mm cap head screws Pictured with Husky wrenches, tested with both SAE and MM, should work with most others as well. 9 slots, need more? print more! Suggest printing…

Downloads
366
Likes
86
Rating
5

Easter Rabbit/Bunny Wreath

Hi all lovers Easters time I created an Easter bunny wreath, for everyone who loves Easter. Ideal for decorating your front door. I hope you will like the model and it will decorate your home. Happy Printing :-)

Downloads
358
Likes
87
Rating
5
P
PrintablesPeter Farell

Snake Wrapped Around Crystal Ball

Snake Wrapped Around Crystal Ball

Downloads
353
Likes
129
Rating
5
P
PrintablesTeo_211

Jeep Wrangler 392 XR Wall Art

Wall Art silhouette model of the Jeep Wrangler 392 XR. Adjustable size. I accept model suggestions or ideas you have.

Downloads
334
Likes
63
Rating
5

LowRider v3 CNC - KINEMATIC Tool-less Quick-Change Accessory Holder - supports laser, drag knife, pen, etc (v4.1)

HEADS UP: A new version compatible with LowRider v4 is now available. Get it here . Here's a helpful video I made about this: This is an adaptation of a Maxwell Kinematic coupling . You can read about that here:…

Downloads
317
Likes
54
Rating
5
P
PrintablesTHRMLstudios

RC Tools - 17mm Hex wrench

Wheel Wrench/Shock Cap Tool for easy disassembly of wheels and damper bodies. A dedicated set of RC tools are a must when getting into this hobby. Why not have some 3D Printed ones in the collection as well? Save some money with these…

Downloads
283
Likes
38
Rating
5
P
PrintablesNinja

Wrestling Earrings

This is a very simple model to print I used 100% infill and a 1.5 layer height

Downloads
282
Likes
35
Rating
5
P
PrintablesFlat Badger

Freenove ESP32-Wrover CAM Mount - Prusa MK3 & MK4

A remix of mhparsons Prusa camera mount. The cable channel has been modified to accommodate a usb cable - this does unfortunately mean it needs multiple supports. The included g-code file has supports painted on in all the necessary…

Downloads
273
Likes
32
Rating
5
P
PrintablesJPMakesStuff

No supports stud for Lego Wreath

No supports Lego-like studs for the excellent Lego Wreath by @MagnumDanger_44252 Prints nicer without supports when using 0.4 nozzle and 0.20 layer height Note that in my pictures I printed… - 6 branches at 150 scale (on the XL) resulting…

Downloads
259
Likes
65
Rating
5
P
PrintablesThe Mapster

Aquarium Piece Ocean Liner Wreck

A small decoration for the floor of your aquarium.

Downloads
219
Likes
40
Rating
5
P
PrintablesJonLB

Maxtrax Pin Wrench

A simple wrench to help turn the locking pins for Maxtrax mounts. Print instructions You have two options: Use the pre-sliced G-code Slice it and use the following settings**: Print settings: 0.15mm QUALITY Filament: PETG Infill: 30%…

Downloads
194
Likes
11
Rating
0

MMU Festo Wrench [SCAD]

The new MMU2S "chimney" makes it a pain to remove the Festo fitting without a wrench handy. Presto, wrench. Print instructions I do mine in PET, PLA should be fine too. If you need to adjust tolerances, check the SCAD source. I originally…

Downloads
185
Likes
23
Rating
5
P
PrintablesLYOTRADE

Historical wrench (inspired by Hand Tool Rescue)

This is not exactly NASA wrench, but it is also easy to print and you can use it in so many different ways (see complete video below :) If you print this thing, I will be happy to see your make in "Post a make". Print Settings Printer…

Downloads
150
Likes
27
Rating
5
P
PrintablesFC2M3D

Angle guide 1,2 cm tall for " Not another LEGOBrick Wreath" (Remix)

I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊

Downloads
142
Likes
25
Rating
0
P
PrintablesLizzB

Turkey Wreath

It's a wreath made of turkeys for all your holiday needs. Use as a wreath on your door to greet your Thanksgiving or holiday guests. Use as a centerpiece during your holiday feast (with a can of cranberry sauce in the middle… yum).…

Downloads
138
Likes
69
Rating
4.75
P
PrintablesMagic Printing

Corvette Logo & Writing keychain

Corvette Logo & Writing keychain

Downloads
126
Likes
4
Rating
5
P
PrintablesBooks

Finger Knob 3/8" Socket Wrench

Small quick-print socket wrench with finger-sized handle for 3/8" sockets. Square block is printed horizontally so that it is less likely to shear along layer lines. If printing for print head nozzle work, use filament with a higher…

Downloads
115
Likes
19
Rating
5
P
Printableschvvkumar

Chihiros WRGB II DIY shade clips

I used these corrugated plastic sheets and cut them to size to use as light blockers for my Chihiros WRGBII https://www.michaels.com/product/plastic-corrugated-board-by-creatology-M10567770 The clips just slot into the light and hold the…

Downloads
110
Likes
11
Rating
0
P
PrintablesExtrude Dude

Knipex Wrench Pliers Holder for Skadis Board

Best to print with supports, though without supports should be fine too. Convenient to use: the left side wedge is kept fairly small, so the pliers can be “lifted” upwards of the holder, not just “pulled” towards you. No further parts…

Downloads
107
Likes
13
Rating
5
P
PrintablesStefan R

Box Wrench Holder / Halter für Ringschlüssel

I tried different wrench holders and found none of them satisfying so I made my own. Fits 8 metric box wrenches and hold them in place, the right thing for my tool box or drawer. I made also a model for combination wrenches . Happy…

Downloads
106
Likes
8
Rating
0
P
Printablesfaultedlogic

Skull & Crossed Wrenches Fan Grill for Satsana Fan Duct 40mm Heatbrake Fan

I recently started using eric-anastas “Satsana Ender 3 Fan Duct” on both my Ender 3 Pro and CTC A10s printers. More specifically, I printed the Satsana duct for an Ender 3 Pro I recently picked up so that I could use its hotend cover to…

Downloads
103
Likes
10
Rating
0
P

Writing Guide for Checks and Envelopes

These templates provide writing guides for addressing envelopes and writing checks for anyone with eyesight impairment or shakey hands.

Downloads
88
Likes
14
Rating
0
P
PrintablesRasmusG

Triple Watchstand for wrist watches

Stable Triple Watchstand for wrist watches. Printed on the Prusa mini in Mat Black PLA. Both STL. and g-code attached

Downloads
87
Likes
22
Rating
5
P
PrintablesMagic Printing

Mercedes-Benz writing & Logo keychain

I made it myself because I love cars

Downloads
85
Likes
4
Rating
0
P
PrintablesRNeese

Combo Wrench Holder

I wanted a way to make better use of the space in my toolbox so I created this combination wrench tool holder. I left enough space between the wrenches to be able to get them out easily. The wrenches are Challenger/Proto. This is part one…

Downloads
83
Likes
31
Rating
0
P
PrintablesDan Rogers

Shipwreck Benchy for your Fish Tank with bubbler

Classic ship-wreck for sinking into your fish tank. Includes air hose connector to give the benchy some bubblin action. Plates added to let you weight down stubborn parts with fish tank gravel. To print - recommend making them not float -…

Downloads
80
Likes
38
Rating
0
P
PrintablesMark1998

HSW Prusa wrench en screwdriver holder

This is a remixed model of @ssenrah. Instead of his model i have changed the hol for the Z-Catch to the screwdriver which is deliverd with youre printer.

Downloads
78
Likes
7
Rating
5
P
PrintablesTeslaactions

Adjustable wrench Print-in-Place For Mini

check it out in onshape https://cad.onshape.com/documents/e73178ebbfdb86730e018ddb/w/e11b586dee2de4c2fe3c87f5/e/54c837b81a8a0a461d038384

Downloads
75
Likes
14
Rating
0
P
PrintablesMagic Printing

Chevrolet logo & writing keychain

I made it myself because I love cars

Downloads
72
Likes
3
Rating
0
P
Printablesoizopetr

Advent wreath

Advent wreath designed for tea (led) candles. When using real tea candles, I recommend printing from durable material and using only under supervision. Tested only from PLA and the shape does not deform. For candle stands, I recommend…

Downloads
68
Likes
19
Rating
0
P
PrintablesMagic Printing

Koeinigsegg logo & writing keychain

I made it myself because I love cars

Downloads
67
Likes
3
Rating
0
P
PrintablesChillyHippo41

Bit Holder For Williams WRS-1 Ratcheting Screwdriver

A simple yet functional bit storage solution for the Williams WRS-1 Ratcheting Screwdriver. It may also fit certain Snap-on ratcheting screwdrivers due to them being similar in design. Holds 6 standard 1/4 inch screwdriver bits and fits…

Downloads
67
Likes
10
Rating
0
P
PrintablesTomM

Radio Knob Replacement (2002 Jeep Wrangler)

Fits perfect on the 2002 Jeep Wrangler stock CD player. The .scad file has parameters you could adjust for similar push-button, spin-to-select type knobs (as often found on a printer's LCD).

Downloads
66
Likes
9
Rating
0
P
PrintablesDeniz

LucidVR ESP32Wroom 38pin Wrist Mount

A Wrist/ Arm mount which is bended so it fits my arm ( when mesured with calipers 68mm in diameter. ) The Idea is from MrLawr3nce on Thangs:…

Downloads
66
Likes
1
Rating
0
P

Surface Pro 5, Laptop Power Cord Wrap (65W)

Just like the original model. print 2 The model is a snug fit around the adapter. Print Settings Printer Brand: Prusa MK3S+ Rafts: No Supports: No Resolution: .20 MM Speed Infill: 15% Material: Prusament ASA

Downloads
64
Likes
9
Rating
4
P

No-mess oil filter wrench/socket for Fram filter PH9688

Oil filters are only supposed to be hand tightened, so a PLA tool should be strong enough and you shouldn't need a ½" socket wrench. The main purpose of this tool is to keep the oil that remains above the filter from running down your arm…

Downloads
64
Likes
10
Rating
5
P
PrintablesErl

Guy line wrapping and tensioning cleat

A cleat I made to wrap the lines for my tarp, to make it fast to deploy and pack. It doubles as a tension device. To use it to tension the rope just pull the line through the big hole and around the ear, like pictured. Use the same method…

Downloads
63
Likes
15
Rating
0
P
PrintablesAdam

Fridge door shelf divider for Whirlpool WRT318FZDM

This is a simple door shelf divider for a Whirlpool WRT318FZDM fridge. It has a clip-on design and comes in two sizes (112x35mm and 112x50mm). Printing instructions Choose the size you'd like Print as-oriented in the .stl file (writing…

Downloads
56
Likes
10
Rating
0
P
PrintablesJSEngineering

Bosch dishwasher waterpocket screw wrench

My Bosch Dishwasher started smelling badly. All cleaning with chemicals did not work. The water in the swamp was not pumped properly and repeatedly became foul. After opening the outer side lid I saw that there is some nasty colorful mold…

Downloads
56
Likes
4
Rating
5
P
Printablestom

Steckschlüssel 8 mm für Gardena Micro-Drip-System/ Socket wrench 8 mm for Gardena Micro-Drip system

Zur Reinigung tausche ich ab und an die Tropfer des Gardena Micro-Drip-Systems aus. Dieses Werkzeug ist dabei sehr hilfreich. Die Schlüsselweite beträgt 8,2 mm. Translation: DeepL I occasionally replace the Gardena Micro-Drip system…

Downloads
54
Likes
11
Rating
5
P
Printablesmscalora

Yet Another Wrench Tray - 6 wrench SAE GearWrench ratcheting set

I created this try to help me stay organized and balance finding, putting away and space efficiency. Large, readable size labels allow wrenches to be stored on edge, you can tell at a glance when a wrench is missing. Generous finger slot…

Downloads
54
Likes
19
Rating
0
P
PrintablesLU_technic

TORX WRENCH SUPPORT

Torx wrench support

Downloads
54
Likes
8
Rating
0
P
PrintablesDr.Enchanted

Lowrider 3 Z Axis Debris Shield

Helps to prevent things from getting sucked into the Z axis screw drive and helps block debris from entering or damaging either side of the Z Axis mount. The purple box in this photo represents a 7mm/12mm or .25in/.5in adhesive Door Brush…

Downloads
52
Likes
17
Rating
0
P
Printables3DFW

MagnoWrap Rook Chess Tower – Flexible Magnetic Chess Board with Storage

The MagnoWrap Rook is a unique 3D-printable chess set that blends creativity, flexibility, and functionality. Wrap the flexible magnetic chess board around a majestic rook-shaped tower that doubles as a piece storage container. It’s part…

Downloads
52
Likes
30
Rating
0
P
PrintablesPhilipp

AMB 1050/1400 Tool Mount for LowRider 3

This model prints with the recommended settings for all the other LowRider parts, 2-3 perimeters, 30% rectilinear infill, structural printing. The “AMB Tool Mount” has to be rotated for the best result, but it should work like this as…

Downloads
51
Likes
10
Rating
5
P
PrintablesKogaMiyata

Adjustable Wrench

This is only for fun and looks a lot like the real wrench, you can use it for employee of the month/year or just for fun. See examples for best result of printing. When the roll-pin is printed the supports are easy to peel with precision…

Downloads
48
Likes
6
Rating
0
P
Printablesjack_agl

Ikea PAX Gift Wrapping Paper Holder

Simple solution to store Gift Wrapping Paper in a place where it doesn't take space away. A quick fix, nothing special. It ain't stupid if it works ;-) Printed with PLA.

Downloads
44
Likes
23
Rating
5
P
PrintablesMagic Printing

Jaguar Logo & Writing keychain

I made it myself because I love cars

Downloads
44
Likes
4
Rating
0
P
PrintablesMagic Printing

Bugatti logo & writing keychain

I made it myself because I love cars

Downloads
44
Likes
2
Rating
0
P
PrintablesBlue Hazel

Wrapping paper holder for IKEA VITTSJÖ

Ther wrapping paper holder is designt for IKEA VITTSJÖ shelf. You need all three parts for one paper holder.

Downloads
39
Likes
11
Rating
0
P
PrintablesGamingCoaster

Romanian Card Holder (writable file with bussines name)

If you want to put your custom name,follow the steps below. 1-open the f3d file in fusion 2-Open sketches 3-Right click on the text sketch and select edit 4-Now in the text you can write your text -To secure in place the pillars use some…

Downloads
38
Likes
13
Rating
0
P
PrintablesBlasted Plastic

lamb of god wrath logo

lamb of god wrath album logo

Downloads
38
Likes
6
Rating
0
P
PrintablesMargineanul

Gift wrapping helper tool

The using indication can be seen in the photos. The parts aren't sticked together.

Downloads
37
Likes
25
Rating
0
P
PrintablesTheMaxx

LowRider2 - Case for Open-CNC-Shield

This is another case designed to attach to the Y-plate on the LowRider2 CNC. It fits to the 4 screws on the upper and lower corners of the Y-plate. In this Version i wanted to integrate the Open-CNC-Shield board from Timo Altholtmann…

Downloads
37
Likes
3
Rating
0
P
PrintablesRicky Li

Hex Bit Ratchet Wrench Tool for 1/4" (with bit storage). Llave criket para puntas de 1/4" (con almacenamiento de puntas)

Improvements in the 3D Cricket Key Design: Advanced Bit Locking : Instead of the bit passing through the wheel, I have redesigned the wheel with a wider central space and a separator. This allows the bit to snugly fit and lock from both…

Downloads
37
Likes
2
Rating
5
P
PrintablesNina Máčová

Flower love wreath

In the case of the inscription wreath, be careful to use the mirror image option if you want to use it as a matrix.

Downloads
35
Likes
15
Rating
0
P
PrintablesMagic Printing

Lotus Logo & Writing keychain

I made it myself because I love cars

Downloads
34
Likes
1
Rating
0
P
PrintablesAdam

Replacement Wrench for Melissa & Doug Take-Along Tool Kit

This is a replacement wrench for the Melissa & Doug Take-Along Tool Kit Wooden Toy ( https://www.melissaanddoug.com/take-along-tool-kit-wooden-toy/494.html ). Design I copied the main exterior and tool dimensions of the original wrench,…

Downloads
34
Likes
8
Rating
0
P
PrintablesSmileynulk

Wrench Holder for 12 wrenches

Wrench/Spanner holder for 12 wrenches. Made to fit Husky Wrench set 1007 691 061. Will likely fit other wrench sets as well, but was made to the dimensions of the Husky set.

Downloads
31
Likes
3
Rating
0
P
PrintablesTimetraveler

printable nozzle wrench hex socket adapter

this printable nozzle changing adapter eliminates the need for any tools or hardware to change the nozzles. It is designed to go with the Nozzle torque wrench from @G_design , but should work with any tool, that uses hex bits. It is…

Downloads
31
Likes
1
Rating
0
P
PrintablesArgiraras

Shipwrights of the North Sea and Runesaga insert

An insert for Shipwrights of the North Sea and runesaga just because there is space in the box. Fits sleeved cards

Downloads
27
Likes
3
Rating
0
P
PrintablesMagic Printing

Audi logo & writing keychain

I made it myself because I love cars

Downloads
26
Likes
2
Rating
0
P
PrintablesNina Máčová

Wrapping paper holder

Wrapping paper holder - right and left consoles two versions Scale it according your needs. I made screw holes blind so you may decide how to work with it more freely. If you need to use them, just drill a hole through or use self-tapping…

Downloads
25
Likes
29
Rating
0
P
PrintablesChris W.

Gift Card Holder for Stealth Wrapping

I wanted to disguise some gift cards the wife was giving this past Christmas. A way to wrap them without putting them in something like a box (but it looks like a box). I printed it in PETG because that's what I had loaded but it should…

Downloads
23
Likes
8
Rating
0
P
Printablescrashkg

Ergonomic Arbor Wrench Handles

These handles help you grip the arbor wrenches better and also protect your hands and the teeth of the blades. When you loosen the arbor nut a lot of the time it gives way suddenly and then the wrenches fly. This last time one wrench…

Downloads
22
Likes
6
Rating
0
P
Printablesjrsone

Hayward skimmer hose adapter wrench

This wrench fits the ~42mm hex head on the hose adapter for a Hayward in-ground pool skimmer, so that it can be installed/removed more easily. If you've ever tried grabbing the adapter with pliers or some other standard wrench, you know…

Downloads
21
Likes
3
Rating
0
P
Printablespik0

StrawRest Cup Lid

We needed personalized lids for our 100mm 20oz cups that we purchased from IKEA. We also wanted a way to insert our 10mm boba straws and be able to pull them out to rest on the top of the lid in order to keep out any bugs. As an added…

Downloads
21
Likes
5
Rating
0
P
PrintablesEFY

Wall Art Geometric | Handwritting Name Circle Frame

As Geometric Wall art, you can write your initials or the characters you want with this form of writing. If you like this style and design, I will add all the alphabet letters one by one. You can show that you like it by liking and saving…

Downloads
20
Likes
7
Rating
0
P
Printablesjurassic73

Moen Arbor Motion Sense Wave Cartridge Wrench

Tool to tighten/loosen ring securing cartridge in a Moen Sense faucet. Mine kept loosening up and I was trying to turn in the ring with a screwdriver which didn't work so well so I designed this. Hope it helps. Hex grip for hand…

Downloads
19
Likes
6
Rating
5
P
Printables2008.vvs

JDM Adjustable Wrench Shifter for THRUSTMASTER TH8S

Backstory Inspiration came from the creator @yunayuna0522 on TikTok who uses an adjustable wrench instead of a shifter rod in her purple Honda S660 build My version connects to the Thrustmaster TH8S for a similar look and feel. Printing…

Downloads
19
Likes
9
Rating
0
P
PrintablesScilent

Cable Wrapper

Easily wrap up your cables or strings into a neat spool, with 4 different size holes to secure them. I've included a Freecad file so you can modify it to your liking.

Downloads
18
Likes
1
Rating
0
P
PrintablesSteveS42

New Milk Jug Wrench

These are the settings for a wrench to open new milk jugs. diameterA: 40.3 toothCountA: 45 toothHeightA: 1 toothWidthBottomA: 2 toothWidthTopA: 1.6 toothCurveA: true thicknessA: 2 diameterB: 16 toothCountB: 0 toothHeightB: 1…

Downloads
15
Likes
4
Rating
0
P
PrintablesF4B1

Wristband Mount for Clover Knitting/Universal Counter

Description: Created this custom-designed clip to convert a Clover Universal Counter (also known as the Clover Mini Knitting Counter or "Kacha-Kacha") into a wearable wristband counter. According to this user review on Amazon , the…

Downloads
10
Likes
2
Rating
0
P
Printablessaso

ETA klíč na mixer / ETA blender wrench

[CZ] Klíč je nutný pro snadné otevření mixeru při čištění. Výrobce nedodal jako originální příslušenství. Testováno na skleněném mixeru 1,5l ETA 1128 99000 , který se používá s následujícími kuchyňskými roboty: ETA1128 90000 Metalic II…

Downloads
10
Likes
1
Rating
0
P
Printablesparticleflux

Wrapping paper wall mount / Geschenkpapier Wandhalter

Wall-mounted gift wrapping paper holder. For storing wrapping paper rolls, or similar light-weight, roll-like things. Maximum diameter per roll probably around 5cm. Mounted via two wooden screws of size 3. Included are versions for 2, 3,…

Downloads
9
Likes
1
Rating
0
P
PrintablesREMLURELMI

Scope Adjustment Wrench (Windage and Elevation)

I find the adjustment knobs to be a little small for my fingers. This tool provides easier adjustment. Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 15+ Supports: No Print Orientation: Default…

Downloads
7
Likes
1
Rating
0
P
PrintablesDokkie

Kochs box without writing

Printing instructions Layers: 0,2 mm Infill: 15% Material: PLA Support: No

Downloads
6
Likes
2
Rating
0
P
PrintablesWeedjesus

Thermal concepts fahrenheit watercooler inner nozzle wrench

Just a wrench for the hex plastic nuts inside the water tank.

Downloads
5
Likes
0
Rating
0
P
Printablesnotyahc67

HP Photosmart M737 Wrist Strap Eyelet Hole Ring

My HP Photosmart M737 camera's wrist strap eyelet broke so I designed a 3D-printable replacement. You'll need some longer screws to fit this replacement. I used 5mm long plastic screws. Recommended Print Settings: ASA or heat resistant…

Downloads
1
Likes
0
Rating
0
P
PrintablesRexPrints

ELCO Connector Wrench

I recommend 100% infill and as many perimeters as you want, as this is likely necessary to ensure it's strong enough for jobsites and gigs. I used 6 perimeters in PETG. Some ELCO Connectors have wing nuts, and this WILL NOT fit on those.…

Downloads
1
Likes
0
Rating
0
P
PrintablesFuganater

Giant LEGO Wreath (No Supports Needed!)

Update Nov. 2024: I completely redesigned this in Fusion 360 and tuned the tolerance for my printer. I suggest printing all the parts on the same printer to ensure a proper fit. There is a .2mm tolerance between the studs. Check your…

Downloads
17,511
Likes
3,244
Rating
4.95
P
PrintablesMagnumDanger

Lego Wreath

A simple Lego Wreath. Not to scale. Adjusted to be printable without supports. Print 6 or more of the branch pieces and as many of the studs as you would like. Press fits on my printer but you might need to sand slightly if your printer…

Downloads
17,267
Likes
4,760
Rating
4.98
P
PrintablesV1 Engineering

LowRider 3 CNC

Updated LowRider CNC v4, here, https://www.printables.com/model/1034840-lowrider-4-cnc This is a full sheet capable CNC router. Size is up to you within reason, tool you use, control board, firmware, and end use is also up to you. I am…

Downloads
9,648
Likes
972
Rating
5
P
PrintablesPLAUK

ESP32-WROOM-32 (USB-C) Box with Lid

ESP32-WROOM-32 Box (USB-C) A small box with snap-fit removable lid for the ESP32-WROOM-32 development board. Pins are still accessible from the underside via two slots. Please note this is for the 28mm x 52mm (approx.) PCB, this is the…

Downloads
9,051
Likes
763
Rating
5
P
PrintablesLumanieri

The Original R.E.P Ratchet Wrench - 1/4" Hex Bit Ratchet Wrench Tool and FIDGET TOY!!!

Hello. This is the R.E.P Ratchet tool. It stand for Rapid Prototyped, Exposed Design & Pocket Sized Hex Driver Bit Ratchet Tool. This is a fast and practical, printed ratcheting ¼" hex driver!!! It is HEAVY DUTY and tested, with an…

Downloads
8,519
Likes
2,173
Rating
4.83
P
PrintablesBen D

Tyrap, tie-wrap, ziptie or cable ties

I seen the contest: last meters to make good use of the last meters you have. So i thought lets do something. im not a designer, but i wanted to make something to minimize plastic waste and make something useful. i made some small cable…

Downloads
8,145
Likes
2,768
Rating
4.49
P
PrintablesV1 Engineering

LowRider 4 CNC

Welcome to the LR4, the LowRider CNC v4, AKA the most productive you can be while still scrolling on your phone. Let the robot do your dirty work while you scroll away and keep an eye on it working. This is a full sheet capable CNC…

Downloads
7,845
Likes
992
Rating
5
P
PrintablesSoarpix

4-Door JEEP Wrangler with removable Hardtop

All my designs on Printables.com are free to download for personal use, but if you like my work please consider to buy me a coffee =) 4-Door JEEP Wrangler with removable Hardtop If you have any questions, let me know in the comments. You…

Downloads
7,756
Likes
3,118
Rating
4.86